* and is not licensed separately. See file COPYING for details.
*
* TODO (sorted by decreasing priority)
+ * -- Kill first_open (Al Viro fixed the block layer now)
* -- Do resets with usb_device_reset (needs a thread context, use khubd)
* -- set readonly flag for CDs, set removable flag for CF readers
* -- do inquiry and verify we got a disk and not a tape (for LUN mismatch)
- * -- support pphaneuf's SDDR-75 with two LUNs (also broken capacity...)
* -- special case some senses, e.g. 3a/0 -> no media present, reduce retries
* -- verify the 13 conditions and do bulk resets
- * -- normal pool of commands instead of cmdv[]?
* -- kill last_pipe and simply do two-state clearing on both pipes
* -- verify protocol (bulk) from USB descriptors (maybe...)
* -- highmem and sg
#define US_SC_SCSI 0x06 /* Transparent */
/*
+ * This many LUNs per USB device.
+ * Every one of them takes a host, see UB_MAX_HOSTS.
*/
+#define UB_MAX_LUNS 4
+
+/*
+ */
+
#define UB_MINORS_PER_MAJOR 8
#define UB_MAX_CDB_SIZE 16 /* Corresponds to Bulk */
u32 Tag; /* unique per command id */
__le32 DataTransferLength; /* size of data */
u8 Flags; /* direction in bit 0 */
- u8 Lun; /* LUN normally 0 */
+ u8 Lun; /* LUN */
u8 Length; /* of of the CDB */
u8 CDB[UB_MAX_CDB_SIZE]; /* max command */
};
unsigned int len; /* Requested length */
// struct scatterlist sgv[UB_MAX_REQ_SG];
+ struct ub_lun *lun;
void (*done)(struct ub_dev *, struct ub_scsi_cmd *);
void *back;
};
};
/*
- * The UB device instance.
+ * The block device instance (one per LUN).
+ */
+struct ub_lun {
+ struct ub_dev *udev;
+ struct list_head link;
+ struct gendisk *disk;
+ int id; /* Host index */
+ int num; /* LUN number */
+ char name[16];
+
+ int changed; /* Media was changed */
+ int removable;
+ int readonly;
+ int first_open; /* Kludge. See ub_bd_open. */
+
+ /* Use Ingo's mempool if or when we have more than one command. */
+ /*
+ * Currently we never need more than one command for the whole device.
+ * However, giving every LUN a command is a cheap and automatic way
+ * to enforce fairness between them.
+ */
+ int cmda[1];
+ struct ub_scsi_cmd cmdv[1];
+
+ struct ub_capacity capacity;
+};
+
+/*
+ * The USB device instance.
*/
struct ub_dev {
spinlock_t lock;
- int id; /* Number among ub's */
atomic_t poison; /* The USB device is disconnected */
int openc; /* protected by ub_lock! */
/* kref is too implicit for our taste */
unsigned int tagcnt;
- int changed; /* Media was changed */
- int removable;
- int readonly;
- int first_open; /* Kludge. See ub_bd_open. */
- char name[8];
+ char name[12];
struct usb_device *dev;
struct usb_interface *intf;
- struct ub_capacity capacity;
- struct gendisk *disk;
+ struct list_head luns;
unsigned int send_bulk_pipe; /* cached pipe values */
unsigned int recv_bulk_pipe;
struct tasklet_struct tasklet;
- /* XXX Use Ingo's mempool (once we have more than one) */
- int cmda[1];
- struct ub_scsi_cmd cmdv[1];
-
struct ub_scsi_cmd_queue cmd_queue;
struct ub_scsi_cmd top_rqs_cmd; /* REQUEST SENSE */
unsigned char top_sense[UB_SENSE_SIZE];
/*
*/
static void ub_cleanup(struct ub_dev *sc);
-static int ub_bd_rq_fn_1(struct ub_dev *sc, struct request *rq);
-static int ub_cmd_build_block(struct ub_dev *sc, struct ub_scsi_cmd *cmd,
- struct request *rq);
+static int ub_bd_rq_fn_1(struct ub_lun *lun, struct request *rq);
+static int ub_cmd_build_block(struct ub_dev *sc, struct ub_lun *lun,
+ struct ub_scsi_cmd *cmd, struct request *rq);
static int ub_cmd_build_packet(struct ub_dev *sc, struct ub_scsi_cmd *cmd,
struct request *rq);
static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd);
static int ub_submit_clear_stall(struct ub_dev *sc, struct ub_scsi_cmd *cmd,
int stalled_pipe);
static void ub_top_sense_done(struct ub_dev *sc, struct ub_scsi_cmd *scmd);
-static int ub_sync_tur(struct ub_dev *sc);
-static int ub_sync_read_cap(struct ub_dev *sc, struct ub_capacity *ret);
+static int ub_sync_tur(struct ub_dev *sc, struct ub_lun *lun);
+static int ub_sync_read_cap(struct ub_dev *sc, struct ub_lun *lun,
+ struct ub_capacity *ret);
+static int ub_probe_lun(struct ub_dev *sc, int lnum);
/*
*/
*/
#define UB_MAX_HOSTS 26
static char ub_hostv[UB_MAX_HOSTS];
+
static DEFINE_SPINLOCK(ub_lock); /* Locks globals and ->openc */
/*
{
struct usb_interface *intf;
struct ub_dev *sc;
+ struct list_head *p;
+ struct ub_lun *lun;
int cnt;
unsigned long flags;
int nc, nh;
spin_lock_irqsave(&sc->lock, flags);
cnt += sprintf(page + cnt,
- "qlen %d qmax %d changed %d removable %d readonly %d\n",
- sc->cmd_queue.qlen, sc->cmd_queue.qmax,
- sc->changed, sc->removable, sc->readonly);
+ "qlen %d qmax %d\n",
+ sc->cmd_queue.qlen, sc->cmd_queue.qmax);
+
+ list_for_each (p, &sc->luns) {
+ lun = list_entry(p, struct ub_lun, link);
+ cnt += sprintf(page + cnt,
+ "lun %u changed %d removable %d readonly %d\n",
+ lun->num, lun->changed, lun->removable, lun->readonly);
+ }
if ((nc = sc->tr.cur + 1) == SCMD_TRACE_SZ) nc = 0;
for (j = 0; j < SCMD_TRACE_SZ; j++) {
*/
static void ub_cleanup(struct ub_dev *sc)
{
+ struct list_head *p;
+ struct ub_lun *lun;
request_queue_t *q;
- /* I don't think queue can be NULL. But... Stolen from sx8.c */
- if ((q = sc->disk->queue) != NULL)
- blk_cleanup_queue(q);
+ while (!list_empty(&sc->luns)) {
+ p = sc->luns.next;
+ lun = list_entry(p, struct ub_lun, link);
+ list_del(p);
- /*
- * If we zero disk->private_data BEFORE put_disk, we have to check
- * for NULL all over the place in open, release, check_media and
- * revalidate, because the block level semaphore is well inside the
- * put_disk. But we cannot zero after the call, because *disk is gone.
- * The sd.c is blatantly racy in this area.
- */
- /* disk->private_data = NULL; */
- put_disk(sc->disk);
- sc->disk = NULL;
+ /* I don't think queue can be NULL. But... Stolen from sx8.c */
+ if ((q = lun->disk->queue) != NULL)
+ blk_cleanup_queue(q);
+ /*
+ * If we zero disk->private_data BEFORE put_disk, we have
+ * to check for NULL all over the place in open, release,
+ * check_media and revalidate, because the block level
+ * semaphore is well inside the put_disk.
+ * But we cannot zero after the call, because *disk is gone.
+ * The sd.c is blatantly racy in this area.
+ */
+ /* disk->private_data = NULL; */
+ put_disk(lun->disk);
+ lun->disk = NULL;
+
+ ub_id_put(lun->id);
+ kfree(lun);
+ }
- ub_id_put(sc->id);
kfree(sc);
}
/*
* The "command allocator".
*/
-static struct ub_scsi_cmd *ub_get_cmd(struct ub_dev *sc)
+static struct ub_scsi_cmd *ub_get_cmd(struct ub_lun *lun)
{
struct ub_scsi_cmd *ret;
- if (sc->cmda[0])
+ if (lun->cmda[0])
return NULL;
- ret = &sc->cmdv[0];
- sc->cmda[0] = 1;
+ ret = &lun->cmdv[0];
+ lun->cmda[0] = 1;
return ret;
}
-static void ub_put_cmd(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
+static void ub_put_cmd(struct ub_lun *lun, struct ub_scsi_cmd *cmd)
{
- if (cmd != &sc->cmdv[0]) {
+ if (cmd != &lun->cmdv[0]) {
printk(KERN_WARNING "%s: releasing a foreign cmd %p\n",
- sc->name, cmd);
+ lun->name, cmd);
return;
}
- if (!sc->cmda[0]) {
- printk(KERN_WARNING "%s: releasing a free cmd\n", sc->name);
+ if (!lun->cmda[0]) {
+ printk(KERN_WARNING "%s: releasing a free cmd\n", lun->name);
return;
}
- sc->cmda[0] = 0;
+ lun->cmda[0] = 0;
}
/*
static void ub_bd_rq_fn(request_queue_t *q)
{
- struct ub_dev *sc = q->queuedata;
+ struct ub_lun *lun = q->queuedata;
struct request *rq;
while ((rq = elv_next_request(q)) != NULL) {
- if (ub_bd_rq_fn_1(sc, rq) != 0) {
+ if (ub_bd_rq_fn_1(lun, rq) != 0) {
blk_stop_queue(q);
break;
}
}
}
-static int ub_bd_rq_fn_1(struct ub_dev *sc, struct request *rq)
+static int ub_bd_rq_fn_1(struct ub_lun *lun, struct request *rq)
{
+ struct ub_dev *sc = lun->udev;
struct ub_scsi_cmd *cmd;
int rc;
- if (atomic_read(&sc->poison) || sc->changed) {
+ if (atomic_read(&sc->poison) || lun->changed) {
blkdev_dequeue_request(rq);
ub_end_rq(rq, 0);
return 0;
}
- if ((cmd = ub_get_cmd(sc)) == NULL)
+ if ((cmd = ub_get_cmd(lun)) == NULL)
return -1;
memset(cmd, 0, sizeof(struct ub_scsi_cmd));
if (blk_pc_request(rq)) {
rc = ub_cmd_build_packet(sc, cmd, rq);
} else {
- rc = ub_cmd_build_block(sc, cmd, rq);
+ rc = ub_cmd_build_block(sc, lun, cmd, rq);
}
if (rc != 0) {
- ub_put_cmd(sc, cmd);
+ ub_put_cmd(lun, cmd);
ub_end_rq(rq, 0);
- blk_start_queue(sc->disk->queue);
return 0;
}
-
cmd->state = UB_CMDST_INIT;
+ cmd->lun = lun;
cmd->done = ub_rw_cmd_done;
cmd->back = rq;
cmd->tag = sc->tagcnt++;
if ((rc = ub_submit_scsi(sc, cmd)) != 0) {
- ub_put_cmd(sc, cmd);
+ ub_put_cmd(lun, cmd);
ub_end_rq(rq, 0);
- blk_start_queue(sc->disk->queue);
return 0;
}
return 0;
}
-static int ub_cmd_build_block(struct ub_dev *sc, struct ub_scsi_cmd *cmd,
- struct request *rq)
+static int ub_cmd_build_block(struct ub_dev *sc, struct ub_lun *lun,
+ struct ub_scsi_cmd *cmd, struct request *rq)
{
int ub_dir;
#if 0 /* We use rq->buffer for now */
sg = &cmd->sgv[0];
n_elem = blk_rq_map_sg(q, rq, sg);
if (n_elem <= 0) {
- ub_put_cmd(sc, cmd);
+ ub_put_cmd(lun, cmd);
ub_end_rq(rq, 0);
blk_start_queue(q);
return 0; /* request with no s/g entries? */
if (n_elem != 1) { /* Paranoia */
printk(KERN_WARNING "%s: request with %d segments\n",
sc->name, n_elem);
- ub_put_cmd(sc, cmd);
+ ub_put_cmd(lun, cmd);
ub_end_rq(rq, 0);
blk_start_queue(q);
return 0;
* The call to blk_queue_hardsect_size() guarantees that request
* is aligned, but it is given in terms of 512 byte units, always.
*/
- block = rq->sector >> sc->capacity.bshift;
- nblks = rq->nr_sectors >> sc->capacity.bshift;
+ block = rq->sector >> lun->capacity.bshift;
+ nblks = rq->nr_sectors >> lun->capacity.bshift;
cmd->cdb[0] = (ub_dir == UB_DIR_READ)? READ_10: WRITE_10;
/* 10-byte uses 4 bytes of LBA: 2147483648KB, 2097152MB, 2048GB */
static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
{
struct request *rq = cmd->back;
- struct gendisk *disk = sc->disk;
+ struct ub_lun *lun = cmd->lun;
+ struct gendisk *disk = lun->disk;
request_queue_t *q = disk->queue;
int uptodate;
else
uptodate = 0;
- ub_put_cmd(sc, cmd);
+ ub_put_cmd(lun, cmd);
ub_end_rq(rq, uptodate);
blk_start_queue(q);
}
bcb->Tag = cmd->tag; /* Endianness is not important */
bcb->DataTransferLength = cpu_to_le32(cmd->len);
bcb->Flags = (cmd->dir == UB_DIR_READ) ? 0x80 : 0;
- bcb->Lun = 0; /* No multi-LUN yet */
+ bcb->Lun = (cmd->lun != NULL) ? cmd->lun->num : 0;
bcb->Length = cmd->cdb_len;
/* copy the command payload */
* The control pipe clears itself - nothing to do.
* XXX Might try to reset the device here and retry.
*/
- printk(KERN_NOTICE "%s: "
- "stall on control pipe for device %u\n",
- sc->name, sc->dev->devnum);
+ printk(KERN_NOTICE "%s: stall on control pipe\n",
+ sc->name);
goto Bad_End;
}
* The control pipe clears itself - nothing to do.
* XXX Might try to reset the device here and retry.
*/
- printk(KERN_NOTICE "%s: "
- "stall on control pipe for device %u\n",
- sc->name, sc->dev->devnum);
+ printk(KERN_NOTICE "%s: stall on control pipe\n",
+ sc->name);
goto Bad_End;
}
rc = ub_submit_clear_stall(sc, cmd, sc->last_pipe);
if (rc != 0) {
printk(KERN_NOTICE "%s: "
- "unable to submit clear for device %u"
- " (code %d)\n",
- sc->name, sc->dev->devnum, rc);
+ "unable to submit clear (%d)\n",
+ sc->name, rc);
/*
* This is typically ENOMEM or some other such shit.
* Retrying is pointless. Just do Bad End on it...
rc = ub_submit_clear_stall(sc, cmd, sc->last_pipe);
if (rc != 0) {
printk(KERN_NOTICE "%s: "
- "unable to submit clear for device %u"
- " (code %d)\n",
- sc->name, sc->dev->devnum, rc);
+ "unable to submit clear (%d)\n",
+ sc->name, rc);
/*
* This is typically ENOMEM or some other such shit.
* Retrying is pointless. Just do Bad End on it...
rc = ub_submit_clear_stall(sc, cmd, sc->last_pipe);
if (rc != 0) {
printk(KERN_NOTICE "%s: "
- "unable to submit clear for device %u"
- " (code %d)\n",
- sc->name, sc->dev->devnum, rc);
+ "unable to submit clear (%d)\n",
+ sc->name, rc);
/*
* This is typically ENOMEM or some other such shit.
* Retrying is pointless. Just do Bad End on it...
* encounter such a thing, try to read the CSW again.
*/
if (++cmd->stat_count >= 4) {
- printk(KERN_NOTICE "%s: "
- "unable to get CSW on device %u\n",
- sc->name, sc->dev->devnum);
+ printk(KERN_NOTICE "%s: unable to get CSW\n",
+ sc->name);
goto Bad_End;
}
__ub_state_stat(sc, cmd);
*/
if (++cmd->stat_count >= 4) {
printk(KERN_NOTICE "%s: "
- "tag mismatch orig 0x%x reply 0x%x "
- "on device %u\n",
- sc->name, cmd->tag, bcs->Tag,
- sc->dev->devnum);
+ "tag mismatch orig 0x%x reply 0x%x\n",
+ sc->name, cmd->tag, bcs->Tag);
goto Bad_End;
}
__ub_state_stat(sc, cmd);
} else {
printk(KERN_WARNING "%s: "
- "wrong command state %d on device %u\n",
- sc->name, cmd->state, sc->dev->devnum);
+ "wrong command state %d\n",
+ sc->name, cmd->state);
goto Bad_End;
}
return;
if ((rc = usb_submit_urb(&sc->work_urb, GFP_ATOMIC)) != 0) {
/* XXX Clear stalls */
- printk("%s: CSW #%d submit failed (%d)\n", sc->name, cmd->tag, rc); /* P3 */
ub_complete(&sc->work_done);
ub_state_done(sc, cmd, rc);
return;
scmd->state = UB_CMDST_INIT;
scmd->data = sc->top_sense;
scmd->len = UB_SENSE_SIZE;
+ scmd->lun = cmd->lun;
scmd->done = ub_top_sense_done;
scmd->back = cmd;
}
if (cmd != scmd->back) {
printk(KERN_WARNING "%s: "
- "sense done for wrong command 0x%x on device %u\n",
- sc->name, cmd->tag, sc->dev->devnum);
+ "sense done for wrong command 0x%x\n",
+ sc->name, cmd->tag);
return;
}
if (cmd->state != UB_CMDST_SENSE) {
printk(KERN_WARNING "%s: "
- "sense done with bad cmd state %d on device %u\n",
- sc->name, cmd->state, sc->dev->devnum);
+ "sense done with bad cmd state %d\n",
+ sc->name, cmd->state);
return;
}
ub_scsi_urb_compl(sc, cmd);
}
-#if 0
-/* Determine what the maximum LUN supported is */
-int usb_stor_Bulk_max_lun(struct us_data *us)
-{
- int result;
-
- /* issue the command */
- result = usb_stor_control_msg(us, us->recv_ctrl_pipe,
- US_BULK_GET_MAX_LUN,
- USB_DIR_IN | USB_TYPE_CLASS |
- USB_RECIP_INTERFACE,
- 0, us->ifnum, us->iobuf, 1, HZ);
-
- /*
- * Some devices (i.e. Iomega Zip100) need this -- apparently
- * the bulk pipes get STALLed when the GetMaxLUN request is
- * processed. This is, in theory, harmless to all other devices
- * (regardless of if they stall or not).
- */
- if (result < 0) {
- usb_stor_clear_halt(us, us->recv_bulk_pipe);
- usb_stor_clear_halt(us, us->send_bulk_pipe);
- }
-
- US_DEBUGP("GetMaxLUN command result is %d, data is %d\n",
- result, us->iobuf[0]);
-
- /* if we have a successful request, return the result */
- if (result == 1)
- return us->iobuf[0];
-
- /* return the default -- no LUNs */
- return 0;
-}
-#endif
-
/*
* This is called from a process context.
*/
-static void ub_revalidate(struct ub_dev *sc)
+static void ub_revalidate(struct ub_dev *sc, struct ub_lun *lun)
{
- sc->readonly = 0; /* XXX Query this from the device */
+ lun->readonly = 0; /* XXX Query this from the device */
- sc->capacity.nsec = 0;
- sc->capacity.bsize = 512;
- sc->capacity.bshift = 0;
+ lun->capacity.nsec = 0;
+ lun->capacity.bsize = 512;
+ lun->capacity.bshift = 0;
- if (ub_sync_tur(sc) != 0)
+ if (ub_sync_tur(sc, lun) != 0)
return; /* Not ready */
- sc->changed = 0;
+ lun->changed = 0;
- if (ub_sync_read_cap(sc, &sc->capacity) != 0) {
+ if (ub_sync_read_cap(sc, lun, &lun->capacity) != 0) {
/*
* The retry here means something is wrong, either with the
* device, with the transport, or with our code.
* We keep this because sd.c has retries for capacity.
*/
- if (ub_sync_read_cap(sc, &sc->capacity) != 0) {
- sc->capacity.nsec = 0;
- sc->capacity.bsize = 512;
- sc->capacity.bshift = 0;
+ if (ub_sync_read_cap(sc, lun, &lun->capacity) != 0) {
+ lun->capacity.nsec = 0;
+ lun->capacity.bsize = 512;
+ lun->capacity.bshift = 0;
}
}
}
static int ub_bd_open(struct inode *inode, struct file *filp)
{
struct gendisk *disk = inode->i_bdev->bd_disk;
+ struct ub_lun *lun;
struct ub_dev *sc;
unsigned long flags;
int rc;
- if ((sc = disk->private_data) == NULL)
+ if ((lun = disk->private_data) == NULL)
return -ENXIO;
+ sc = lun->udev;
+
spin_lock_irqsave(&ub_lock, flags);
if (atomic_read(&sc->poison)) {
spin_unlock_irqrestore(&ub_lock, flags);
* The bottom line is, Al Viro says that we should not allow
* bdev->bd_invalidated to be set when doing add_disk no matter what.
*/
- if (sc->first_open) {
- if (sc->changed) {
- sc->first_open = 0;
+ if (lun->first_open) {
+ lun->first_open = 0;
+ if (lun->changed) {
rc = -ENOMEDIUM;
goto err_open;
}
}
- if (sc->removable || sc->readonly)
+ if (lun->removable || lun->readonly)
check_disk_change(inode->i_bdev);
/*
* under some pretty murky conditions (a failure of READ CAPACITY).
* We may need it one day.
*/
- if (sc->removable && sc->changed && !(filp->f_flags & O_NDELAY)) {
+ if (lun->removable && lun->changed && !(filp->f_flags & O_NDELAY)) {
rc = -ENOMEDIUM;
goto err_open;
}
- if (sc->readonly && (filp->f_mode & FMODE_WRITE)) {
+ if (lun->readonly && (filp->f_mode & FMODE_WRITE)) {
rc = -EROFS;
goto err_open;
}
static int ub_bd_release(struct inode *inode, struct file *filp)
{
struct gendisk *disk = inode->i_bdev->bd_disk;
- struct ub_dev *sc = disk->private_data;
+ struct ub_lun *lun = disk->private_data;
+ struct ub_dev *sc = lun->udev;
ub_put(sc);
return 0;
*/
static int ub_bd_revalidate(struct gendisk *disk)
{
- struct ub_dev *sc = disk->private_data;
-
- ub_revalidate(sc);
- /* This is pretty much a long term P3 */
- if (!atomic_read(&sc->poison)) { /* Cover sc->dev */
- printk(KERN_INFO "%s: device %u capacity nsec %ld bsize %u\n",
- sc->name, sc->dev->devnum,
- sc->capacity.nsec, sc->capacity.bsize);
- }
+ struct ub_lun *lun = disk->private_data;
+
+ ub_revalidate(lun->udev, lun);
/* XXX Support sector size switching like in sr.c */
- blk_queue_hardsect_size(disk->queue, sc->capacity.bsize);
- set_capacity(disk, sc->capacity.nsec);
- // set_disk_ro(sdkp->disk, sc->readonly);
+ blk_queue_hardsect_size(disk->queue, lun->capacity.bsize);
+ set_capacity(disk, lun->capacity.nsec);
+ // set_disk_ro(sdkp->disk, lun->readonly);
return 0;
}
*/
static int ub_bd_media_changed(struct gendisk *disk)
{
- struct ub_dev *sc = disk->private_data;
+ struct ub_lun *lun = disk->private_data;
- if (!sc->removable)
+ if (!lun->removable)
return 0;
/*
* will fail, then block layer discards the data. Since we never
* spin drives up, such devices simply cannot be used with ub anyway.
*/
- if (ub_sync_tur(sc) != 0) {
- sc->changed = 1;
+ if (ub_sync_tur(lun->udev, lun) != 0) {
+ lun->changed = 1;
return 1;
}
- return sc->changed;
+ return lun->changed;
}
static struct block_device_operations ub_bd_fops = {
/*
* Test if the device has a check condition on it, synchronously.
*/
-static int ub_sync_tur(struct ub_dev *sc)
+static int ub_sync_tur(struct ub_dev *sc, struct ub_lun *lun)
{
struct ub_scsi_cmd *cmd;
enum { ALLOC_SIZE = sizeof(struct ub_scsi_cmd) };
cmd->cdb_len = 6;
cmd->dir = UB_DIR_NONE;
cmd->state = UB_CMDST_INIT;
+ cmd->lun = lun; /* This may be NULL, but that's ok */
cmd->done = ub_probe_done;
cmd->back = &compl;
/*
* Read the SCSI capacity synchronously (for probing).
*/
-static int ub_sync_read_cap(struct ub_dev *sc, struct ub_capacity *ret)
+static int ub_sync_read_cap(struct ub_dev *sc, struct ub_lun *lun,
+ struct ub_capacity *ret)
{
struct ub_scsi_cmd *cmd;
char *p;
cmd->state = UB_CMDST_INIT;
cmd->data = p;
cmd->len = 8;
+ cmd->lun = lun;
cmd->done = ub_probe_done;
cmd->back = &compl;
complete(cop);
}
+/*
+ * Get number of LUNs by the way of Bulk GetMaxLUN command.
+ */
+static int ub_sync_getmaxlun(struct ub_dev *sc)
+{
+ int ifnum = sc->intf->cur_altsetting->desc.bInterfaceNumber;
+ unsigned char *p;
+ enum { ALLOC_SIZE = 1 };
+ struct usb_ctrlrequest *cr;
+ struct completion compl;
+ struct timer_list timer;
+ int nluns;
+ int rc;
+
+ init_completion(&compl);
+
+ rc = -ENOMEM;
+ if ((p = kmalloc(ALLOC_SIZE, GFP_KERNEL)) == NULL)
+ goto err_alloc;
+ *p = 55;
+
+ cr = &sc->work_cr;
+ cr->bRequestType = USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE;
+ cr->bRequest = US_BULK_GET_MAX_LUN;
+ cr->wValue = cpu_to_le16(0);
+ cr->wIndex = cpu_to_le16(ifnum);
+ cr->wLength = cpu_to_le16(1);
+
+ usb_fill_control_urb(&sc->work_urb, sc->dev, sc->recv_ctrl_pipe,
+ (unsigned char*) cr, p, 1, ub_probe_urb_complete, &compl);
+ sc->work_urb.transfer_flags = 0;
+ sc->work_urb.actual_length = 0;
+ sc->work_urb.error_count = 0;
+ sc->work_urb.status = 0;
+
+ if ((rc = usb_submit_urb(&sc->work_urb, GFP_KERNEL)) != 0) {
+ if (rc == -EPIPE) {
+ printk("%s: Stall at GetMaxLUN, using 1 LUN\n",
+ sc->name); /* P3 */
+ } else {
+ printk(KERN_WARNING
+ "%s: Unable to submit GetMaxLUN (%d)\n",
+ sc->name, rc);
+ }
+ goto err_submit;
+ }
+
+ init_timer(&timer);
+ timer.function = ub_probe_timeout;
+ timer.data = (unsigned long) &compl;
+ timer.expires = jiffies + UB_CTRL_TIMEOUT;
+ add_timer(&timer);
+
+ wait_for_completion(&compl);
+
+ del_timer_sync(&timer);
+ usb_kill_urb(&sc->work_urb);
+
+ if (sc->work_urb.actual_length != 1) {
+ printk("%s: GetMaxLUN returned %d bytes\n", sc->name,
+ sc->work_urb.actual_length); /* P3 */
+ nluns = 0;
+ } else {
+ if ((nluns = *p) == 55) {
+ nluns = 0;
+ } else {
+ /* GetMaxLUN returns the maximum LUN number */
+ nluns += 1;
+ if (nluns > UB_MAX_LUNS)
+ nluns = UB_MAX_LUNS;
+ }
+ printk("%s: GetMaxLUN returned %d, using %d LUNs\n", sc->name,
+ *p, nluns); /* P3 */
+ }
+
+ kfree(p);
+ return nluns;
+
+err_submit:
+ kfree(p);
+err_alloc:
+ return rc;
+}
+
/*
* Clear initial stalls.
*/
}
if (ep_in == NULL || ep_out == NULL) {
- printk(KERN_NOTICE "%s: device %u failed endpoint check\n",
- sc->name, sc->dev->devnum);
+ printk(KERN_NOTICE "%s: failed endpoint check\n",
+ sc->name);
return -EIO;
}
const struct usb_device_id *dev_id)
{
struct ub_dev *sc;
- request_queue_t *q;
- struct gendisk *disk;
+ int nluns;
int rc;
int i;
goto err_core;
memset(sc, 0, sizeof(struct ub_dev));
spin_lock_init(&sc->lock);
+ INIT_LIST_HEAD(&sc->luns);
usb_init_urb(&sc->work_urb);
tasklet_init(&sc->tasklet, ub_scsi_action, (unsigned long)sc);
atomic_set(&sc->poison, 0);
ub_init_completion(&sc->work_done);
sc->work_done.done = 1; /* A little yuk, but oh well... */
- rc = -ENOSR;
- if ((sc->id = ub_id_get()) == -1)
- goto err_id;
- snprintf(sc->name, 8, DRV_NAME "%c", sc->id + 'a');
-
sc->dev = interface_to_usbdev(intf);
sc->intf = intf;
// sc->ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
-
usb_set_intfdata(intf, sc);
usb_get_dev(sc->dev);
// usb_get_intf(sc->intf); /* Do we need this? */
+ snprintf(sc->name, 12, DRV_NAME "(%d.%d)",
+ sc->dev->bus->busnum, sc->dev->devnum);
+
/* XXX Verify that we can handle the device (from descriptors) */
ub_get_pipes(sc, sc->dev, intf);
* In any case it's not our business how revaliadation is implemented.
*/
for (i = 0; i < 3; i++) { /* Retries for benh's key */
- if ((rc = ub_sync_tur(sc)) <= 0) break;
+ if ((rc = ub_sync_tur(sc, NULL)) <= 0) break;
if (rc != 0x6) break;
msleep(10);
}
- sc->removable = 1; /* XXX Query this from the device */
- sc->changed = 1; /* ub_revalidate clears only */
- sc->first_open = 1;
+ nluns = 1;
+ for (i = 0; i < 3; i++) {
+ if ((rc = ub_sync_getmaxlun(sc)) < 0) {
+ /*
+ * Some devices (i.e. Iomega Zip100) need this --
+ * apparently the bulk pipes get STALLed when the
+ * GetMaxLUN request is processed.
+ * XXX I have a ZIP-100, verify it does this.
+ */
+ if (rc == -EPIPE) {
+ ub_probe_clear_stall(sc, sc->recv_bulk_pipe);
+ ub_probe_clear_stall(sc, sc->send_bulk_pipe);
+ }
+ break;
+ }
+ if (rc != 0) {
+ nluns = rc;
+ break;
+ }
+ mdelay(100);
+ }
- ub_revalidate(sc);
- /* This is pretty much a long term P3 */
- printk(KERN_INFO "%s: device %u capacity nsec %ld bsize %u\n",
- sc->name, sc->dev->devnum, sc->capacity.nsec, sc->capacity.bsize);
+ for (i = 0; i < nluns; i++) {
+ ub_probe_lun(sc, i);
+ }
+ return 0;
+
+ /* device_remove_file(&sc->intf->dev, &dev_attr_diag); */
+err_diag:
+ usb_set_intfdata(intf, NULL);
+ // usb_put_intf(sc->intf);
+ usb_put_dev(sc->dev);
+ kfree(sc);
+err_core:
+ return rc;
+}
+
+static int ub_probe_lun(struct ub_dev *sc, int lnum)
+{
+ struct ub_lun *lun;
+ request_queue_t *q;
+ struct gendisk *disk;
+ int rc;
+
+ rc = -ENOMEM;
+ if ((lun = kmalloc(sizeof(struct ub_lun), GFP_KERNEL)) == NULL)
+ goto err_alloc;
+ memset(lun, 0, sizeof(struct ub_lun));
+ lun->num = lnum;
+
+ rc = -ENOSR;
+ if ((lun->id = ub_id_get()) == -1)
+ goto err_id;
+
+ lun->udev = sc;
+ list_add(&lun->link, &sc->luns);
+
+ snprintf(lun->name, 16, DRV_NAME "%c(%d.%d.%d)",
+ lun->id + 'a', sc->dev->bus->busnum, sc->dev->devnum, lun->num);
+
+ lun->removable = 1; /* XXX Query this from the device */
+ lun->changed = 1; /* ub_revalidate clears only */
+ lun->first_open = 1;
+ ub_revalidate(sc, lun);
- /*
- * Just one disk per sc currently, but maybe more.
- */
rc = -ENOMEM;
if ((disk = alloc_disk(UB_MINORS_PER_MAJOR)) == NULL)
goto err_diskalloc;
- sc->disk = disk;
- sprintf(disk->disk_name, DRV_NAME "%c", sc->id + 'a');
- sprintf(disk->devfs_name, DEVFS_NAME "/%c", sc->id + 'a');
+ lun->disk = disk;
+ sprintf(disk->disk_name, DRV_NAME "%c", lun->id + 'a');
+ sprintf(disk->devfs_name, DEVFS_NAME "/%c", lun->id + 'a');
disk->major = UB_MAJOR;
- disk->first_minor = sc->id * UB_MINORS_PER_MAJOR;
+ disk->first_minor = lun->id * UB_MINORS_PER_MAJOR;
disk->fops = &ub_bd_fops;
- disk->private_data = sc;
- disk->driverfs_dev = &intf->dev;
+ disk->private_data = lun;
+ disk->driverfs_dev = &sc->intf->dev; /* XXX Many to one ok? */
rc = -ENOMEM;
if ((q = blk_init_queue(ub_bd_rq_fn, &sc->lock)) == NULL)
disk->queue = q;
- // blk_queue_bounce_limit(q, hba[i]->pdev->dma_mask);
+ blk_queue_bounce_limit(q, BLK_BOUNCE_HIGH);
blk_queue_max_hw_segments(q, UB_MAX_REQ_SG);
blk_queue_max_phys_segments(q, UB_MAX_REQ_SG);
- // blk_queue_segment_boundary(q, CARM_SG_BOUNDARY);
+ blk_queue_segment_boundary(q, 0xffffffff); /* Dubious. */
blk_queue_max_sectors(q, UB_MAX_SECTORS);
- blk_queue_hardsect_size(q, sc->capacity.bsize);
-
- /*
- * This is a serious infraction, caused by a deficiency in the
- * USB sg interface (usb_sg_wait()). We plan to remove this once
- * we get mileage on the driver and can justify a change to USB API.
- * See blk_queue_bounce_limit() to understand this part.
- *
- * XXX And I still need to be aware of the DMA mask in the HC.
- */
- q->bounce_pfn = blk_max_low_pfn;
- q->bounce_gfp = GFP_NOIO;
+ blk_queue_hardsect_size(q, lun->capacity.bsize);
- q->queuedata = sc;
+ q->queuedata = lun;
- set_capacity(disk, sc->capacity.nsec);
- if (sc->removable)
+ set_capacity(disk, lun->capacity.nsec);
+ if (lun->removable)
disk->flags |= GENHD_FL_REMOVABLE;
add_disk(disk);
err_blkqinit:
put_disk(disk);
err_diskalloc:
- device_remove_file(&sc->intf->dev, &dev_attr_diag);
-err_diag:
- usb_set_intfdata(intf, NULL);
- // usb_put_intf(sc->intf);
- usb_put_dev(sc->dev);
- ub_id_put(sc->id);
+ list_del(&lun->link);
+ ub_id_put(lun->id);
err_id:
- kfree(sc);
-err_core:
+ kfree(lun);
+err_alloc:
return rc;
}
static void ub_disconnect(struct usb_interface *intf)
{
struct ub_dev *sc = usb_get_intfdata(intf);
- struct gendisk *disk = sc->disk;
+ struct list_head *p;
+ struct ub_lun *lun;
+ struct gendisk *disk;
unsigned long flags;
/*
/*
* Unregister the upper layer.
*/
- if (disk->flags & GENHD_FL_UP)
- del_gendisk(disk);
- /*
- * I wish I could do:
- * set_bit(QUEUE_FLAG_DEAD, &q->queue_flags);
- * As it is, we rely on our internal poisoning and let
- * the upper levels to spin furiously failing all the I/O.
- */
+ list_for_each (p, &sc->luns) {
+ lun = list_entry(p, struct ub_lun, link);
+ disk = lun->disk;
+ if (disk->flags & GENHD_FL_UP)
+ del_gendisk(disk);
+ /*
+ * I wish I could do:
+ * set_bit(QUEUE_FLAG_DEAD, &q->queue_flags);
+ * As it is, we rely on our internal poisoning and let
+ * the upper levels to spin furiously failing all the I/O.
+ */
+ }
/*
* Taking a lock on a structure which is about to be freed
{
int rc;
- /* P3 */ printk("ub: sizeof ub_scsi_cmd %zu ub_dev %zu\n",
- sizeof(struct ub_scsi_cmd), sizeof(struct ub_dev));
+ /* P3 */ printk("ub: sizeof ub_scsi_cmd %zu ub_dev %zu ub_lun %zu\n",
+ sizeof(struct ub_scsi_cmd), sizeof(struct ub_dev), sizeof(struct ub_lun));
if ((rc = register_blkdev(UB_MAJOR, DRV_NAME)) != 0)
goto err_regblkdev;
projects / linux-2.6 / commitdiff