[SPARC64] sunhv: Use virtual-devices layer to get interrupt.

Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/serial/sunhv.c b/drivers/serial/sunhv.c
index 2ba716eeb0bf89d764baa799bdc204be50a98920..d3a9dd739da31705b2441dca5379ed9b76725d4d 100644 (file)
--- a/drivers/serial/sunhv.c
+++ b/drivers/serial/sunhv.c
@@ -20,6 +20,8 @@
 
 #include <asm/hypervisor.h>
 #include <asm/spitfire.h>
+#include <asm/vdev.h>
+#include <asm/irq.h>
 
 #if defined(CONFIG_MAGIC_SYSRQ)
 #define SUPPORT_SYSRQ
@@ -407,6 +409,60 @@ static void __init sunhv_console_init(void)
        register_console(&sunhv_console);
 }
 
+static int __init hv_console_compatible(char *buf, int len)
+{
+       while (len) {
+               int this_len;
+
+               if (!strcmp(buf, "qcn"))
+                       return 1;
+
+               this_len = strlen(buf) + 1;
+
+               buf += this_len;
+               len -= this_len;
+       }
+
+       return 0;
+}
+
+static unsigned int __init get_interrupt(void)
+{
+       const char *cons_str = "console";
+       const char *compat_str = "compatible";
+       int node = prom_getchild(sun4v_vdev_root);
+       unsigned int irq;
+       char buf[64];
+       int err, len;
+
+       node = prom_searchsiblings(node, cons_str);
+       if (!node)
+               return 0;
+
+       len = prom_getproplen(node, compat_str);
+       if (len == 0 || len == -1)
+               return 0;
+
+       err = prom_getproperty(node, compat_str, buf, 64);
+       if (err == -1)
+               return 0;
+
+       if (!hv_console_compatible(buf, len))
+               return 0;
+
+       /* Ok, the this is the OBP node for the sun4v hypervisor
+        * console device.  Decode the interrupt.
+        */
+       err = prom_getproperty(node, "interrupts",
+                              (char *) &irq, sizeof(irq));
+       if (err == -1)
+               return 0;
+
+       return sun4v_build_irq(sun4v_vdev_devhandle, irq, 4, 0);
+}
+
+static u32 sunhv_irq;
+
 static int __init sunhv_init(void)
 {
        struct uart_port *port;
@@ -415,6 +471,10 @@ static int __init sunhv_init(void)
        if (tlb_type != hypervisor)
                return -ENODEV;
 
+       sunhv_irq = get_interrupt();
+       if (!sunhv_irq)
+               return -ENODEV;
+
        port = kmalloc(sizeof(struct uart_port), GFP_KERNEL);
        if (unlikely(!port))
                return -ENOMEM;
@@ -424,22 +484,23 @@ static int __init sunhv_init(void)
        port->type = PORT_SUNHV;
        port->uartclk = ( 29491200 / 16 ); /* arbitrary */
 
-       /* XXX Get interrupt. XXX */
-       if (request_irq(0 /* XXX */, sunhv_interrupt,
+       if (request_irq(sunhv_irq, sunhv_interrupt,
                        SA_SHIRQ, "serial(sunhv)", port)) {
-               printk("sunhv: Cannot get IRQ %x\n",
-                      0 /* XXX */);
+               printk("sunhv: Cannot get IRQ %x\n", sunhv_irq);
                kfree(port);
                return -ENODEV;
        }
 
+       printk("SUNHV: SUN4V virtual console, IRQ[%08x]\n",
+              sunhv_irq);
+
        sunhv_reg.minor = sunserial_current_minor;
        sunhv_reg.nr = 1;
        sunhv_reg.cons = &sunhv_console;
 
        ret = uart_register_driver(&sunhv_reg);
        if (ret < 0) {
-               free_irq(0 /* XXX */, up);
+               free_irq(sunhv_irq, up);
                kfree(port);
 
                return ret;
@@ -463,7 +524,7 @@ static void __exit sunhv_exit(void)
        BUG_ON(!port);
 
        uart_remove_one_port(&sunhv_reg, port);
-       free_irq(0 /* XXX */, port);
+       free_irq(sunhv_irq, port);
 
        sunserial_current_minor -= 1;