[MIPS] Fix configuration of R2 CPU features and multithreading.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 002845e820f3ddd6c82e6535041d7e763a9415b4..05663e5ddd39757190f5e9316808ad3a3d8c1092 100644 (file)
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -308,6 +308,7 @@ config MIPS_ATLAS
        select SYS_SUPPORTS_64BIT_KERNEL
        select SYS_SUPPORTS_BIG_ENDIAN
        select SYS_SUPPORTS_LITTLE_ENDIAN
+       select SYS_SUPPORTS_MULTITHREADING if EXPERIMENTAL
        help
          This enables support for the MIPS Technologies Atlas evaluation
          board.
@@ -336,6 +337,7 @@ config MIPS_MALTA
        select SYS_SUPPORTS_64BIT_KERNEL
        select SYS_SUPPORTS_BIG_ENDIAN
        select SYS_SUPPORTS_LITTLE_ENDIAN
+       select SYS_SUPPORTS_MULTITHREADING
        help
          This enables support for the MIPS Technologies Malta evaluation
          board.
@@ -1495,34 +1497,57 @@ config SIBYTE_DMA_PAGEOPS
 config CPU_HAS_PREFETCH
        bool
 
-config MIPS_MT
-       bool "Enable MIPS MT"
-       depends on CPU_MIPS32_R2
-       #depends on CPU_MIPS64_R2               # later ...
-
 choice
        prompt "MIPS MT options"
-       depends on MIPS_MT
+
+config MIPS_MT_DISABLED
+       bool "Disable multithreading support."
+       help
+         Use this option if your workload can't take advantage of
+         MIPS hardware multithreading support.  On systems that don't have
+         the option of an MT-enabled processor this option will be the only
+         option in this menu.
 
 config MIPS_MT_SMTC
        bool "SMTC: Use all TCs on all VPEs for SMP"
+       depends on CPU_MIPS32_R2
+       #depends on CPU_MIPS64_R2               # once there is hardware ...
+       depends on SYS_SUPPORTS_MULTITHREADING
        select CPU_MIPSR2_IRQ_VI
        select CPU_MIPSR2_SRS
+       select MIPS_MT
        select SMP
+       help
+         This is a kernel model which is known a SMTC or lately has been
+         marketesed into SMVP.
 
 config MIPS_MT_SMP
        bool "Use 1 TC on each available VPE for SMP"
+       depends on SYS_SUPPORTS_MULTITHREADING
+       select CPU_MIPSR2_IRQ_VI
+       select CPU_MIPSR2_SRS
+       select MIPS_MT
        select SMP
+       help
+         This is a kernel model which is also known a VSMP or lately
+         has been marketesed into SMVP.
 
 config MIPS_VPE_LOADER
        bool "VPE loader support."
-       depends on MIPS_MT
+       depends on SYS_SUPPORTS_MULTITHREADING
+       select MIPS_MT
        help
          Includes a loader for loading an elf relocatable object
          onto another VPE and running it.
 
 endchoice
 
+config MIPS_MT
+       bool
+
+config SYS_SUPPORTS_MULTITHREADING
+       bool
+
 config MIPS_MT_FPAFF
        bool "Dynamic FPU affinity for FP-intensive threads"
        depends on MIPS_MT
@@ -1579,32 +1604,23 @@ config CPU_HAS_LLSC
 config CPU_HAS_WB
        bool
 
+#
+# Vectored interrupt mode is an R2 feature
+#
 config CPU_MIPSR2_IRQ_VI
-       bool "Vectored interrupt mode"
-       depends on CPU_MIPSR2
-       help
-          Vectored interrupt mode allowing faster dispatching of interrupts.
-          The board support code needs to be written to take advantage of this
-          mode.  Compatibility code is included to allow the kernel to run on
-          a CPU that does not support vectored interrupts.  It's safe to
-          say Y here.
+       bool
 
+#
+# Extended interrupt mode is an R2 feature
+#
 config CPU_MIPSR2_IRQ_EI
-       bool "External interrupt controller mode"
-       depends on CPU_MIPSR2
-       help
-          Extended interrupt mode takes advantage of an external interrupt
-          controller to allow fast dispatching from many possible interrupt
-          sources. Say N unless you know that external interrupt support is
-          required.
+       bool
 
+#
+# Shadow registers are an R2 feature
+#
 config CPU_MIPSR2_SRS
-       bool "Make shadow set registers available for interrupt handlers"
-       depends on CPU_MIPSR2_IRQ_VI || CPU_MIPSR2_IRQ_EI
-       help
-          Allow the kernel to use shadow register sets for fast interrupts.
-          Interrupt handlers must be specially written to use shadow sets.
-          Say N unless you know that shadow register set upport is needed.
+       bool
 
 config CPU_HAS_SYNC
        bool

diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index ad16eceb24dd34bba57f2673dc2fa31ace1cd8fc..67971938a2cb4f575321a550ff5aee5deacd315f 100644 (file)
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -1050,7 +1050,7 @@ void *set_except_vector(int n, void *addr)
        return (void *)old_handler;
 }
 
-#ifdef CONFIG_CPU_MIPSR2
+#ifdef CONFIG_CPU_MIPSR2_SRS
 /*
  * MIPSR2 shadow register set allocation
  * FIXME: SMP...
@@ -1069,11 +1069,9 @@ static struct shadow_registers {
 
 static void mips_srs_init(void)
 {
-#ifdef CONFIG_CPU_MIPSR2_SRS
        shadow_registers.sr_supported = ((read_c0_srsctl() >> 26) & 0x0f) + 1;
        printk(KERN_INFO "%d MIPSR2 register sets available\n",
               shadow_registers.sr_supported);
-#endif
        shadow_registers.sr_allocated = 1;      /* Set 0 used by kernel */
 }
 
@@ -1198,7 +1196,14 @@ void *set_vi_handler(int n, void *addr)
 {
        return set_vi_srs_handler(n, addr, 0);
 }
-#endif
+
+#else
+
+static inline void mips_srs_init(void)
+{
+}
+
+#endif /* CONFIG_CPU_MIPSR2_SRS */
 
 /*
  * This is used by native signal handling
@@ -1388,9 +1393,7 @@ void __init trap_init(void)
        else
                ebase = CAC_BASE;
 
-#ifdef CONFIG_CPU_MIPSR2
        mips_srs_init();
-#endif
 
        per_cpu_trap_init();
 

diff --git a/include/asm-mips/cpu-features.h b/include/asm-mips/cpu-features.h
index 881ce1f9803da703f0b8681ed0459f01c7c67dc3..44285a9d55204c767fc63d0e972fe6fff94cdca8 100644 (file)
--- a/include/asm-mips/cpu-features.h
+++ b/include/asm-mips/cpu-features.h
@@ -187,19 +187,15 @@
 # endif
 #endif
 
-#ifdef CONFIG_CPU_MIPSR2
-# if defined(CONFIG_CPU_MIPSR2_IRQ_VI) && !defined(cpu_has_vint)
-#  define cpu_has_vint         (cpu_data[0].options & MIPS_CPU_VINT)
-# else
-#  define cpu_has_vint                 0
-# endif
-# if defined(CONFIG_CPU_MIPSR2_IRQ_EI) && !defined(cpu_has_veic)
-#  define cpu_has_veic         (cpu_data[0].options & MIPS_CPU_VEIC)
-# else
-#  define cpu_has_veic                 0
-# endif
-#else
+#if defined(CONFIG_CPU_MIPSR2_IRQ_VI) && !defined(cpu_has_vint)
+# define cpu_has_vint          (cpu_data[0].options & MIPS_CPU_VINT)
+#elif !defined(cpu_has_vint)
 # define cpu_has_vint                  0
+#endif
+
+#if defined(CONFIG_CPU_MIPSR2_IRQ_EI) && !defined(cpu_has_veic)
+# define cpu_has_veic          (cpu_data[0].options & MIPS_CPU_VEIC)
+#elif !defined(cpu_has_veic)
 # define cpu_has_veic                  0
 #endif