]> err.no Git - linux-2.6/commitdiff
powerpc: Use correct sequence for putting CPU into nap mode
authorPaul Mackerras <paulus@samba.org>
Tue, 18 Apr 2006 11:49:11 +0000 (21:49 +1000)
committerPaul Mackerras <paulus@samba.org>
Tue, 18 Apr 2006 11:49:11 +0000 (21:49 +1000)
We weren't using the recommended sequence for putting the CPU into
nap mode.  When I changed the idle loop, for some reason 7447A cpus
started hanging when we put them into nap mode.  Changing to the
recommended sequence fixes that.

The complexity here is that the recommended sequence is a loop that
keeps putting the cpu back into nap mode.  Clearly we need some way
to break out of the loop when an interrupt (external interrupt,
decrementer, performance monitor) occurs.  Here we use a bit in
the thread_info struct to indicate that we need this, and the exception
entry code notices this and arranges for the exception to return
to the value in the link register, thus breaking out of the loop.
We use a new `local_flags' field in the thread_info which we can
alter without needing to use an atomic update sequence.

The PPC970 has the same recommended sequence, so we do the same thing
there too.

This also fixes a bug in the kernel stack overflow handling code on
32-bit, since it was causing a value that we needed in a register to
get trashed.

Signed-off-by: Paul Mackerras <paulus@samba.org>
arch/powerpc/Kconfig
arch/powerpc/kernel/Makefile
arch/powerpc/kernel/asm-offsets.c
arch/powerpc/kernel/entry_32.S
arch/powerpc/kernel/head_64.S
arch/powerpc/kernel/idle_6xx.S
arch/powerpc/kernel/idle_power4.S
include/asm-powerpc/thread_info.h

index 2cdc35ce80451c5e503e97904cd763474d63b752..65f67f9861566dff0b35793d09908a15fa27694a 100644 (file)
@@ -366,6 +366,7 @@ config PPC_PMAC64
        select U3_DART
        select MPIC_BROKEN_U3
        select GENERIC_TBSYNC
+       select PPC_970_NAP
        default y
 
 config PPC_PREP
@@ -383,6 +384,7 @@ config PPC_MAPLE
        select MPIC_BROKEN_U3
        select GENERIC_TBSYNC
        select PPC_UDBG_16550
+       select PPC_970_NAP
        default n
        help
           This option enables support for the Maple 970FX Evaluation Board.
@@ -457,6 +459,10 @@ config PPC_MPC106
        bool
        default n
 
+config PPC_970_NAP
+       bool
+       default n
+
 source "drivers/cpufreq/Kconfig"
 
 config CPU_FREQ_PMAC
index 0cc0995b81b07ec355413ba07ce8bfff08c58b98..803858e8616031054c62fbb04021e0d6a3f13052 100644 (file)
@@ -20,7 +20,7 @@ obj-$(CONFIG_PPC64)           += setup_64.o binfmt_elf32.o sys_ppc32.o \
                                   firmware.o sysfs.o
 obj-$(CONFIG_PPC64)            += vdso64/
 obj-$(CONFIG_ALTIVEC)          += vecemu.o vector.o
-obj-$(CONFIG_POWER4)           += idle_power4.o
+obj-$(CONFIG_PPC_970_NAP)      += idle_power4.o
 obj-$(CONFIG_PPC_OF)           += of_device.o prom_parse.o
 procfs-$(CONFIG_PPC64)         := proc_ppc64.o
 obj-$(CONFIG_PROC_FS)          += $(procfs-y)
index 54b48f3300515eb082eed331267e0373ca575507..8f85c5e8a55a438e927d6ca729e67066199f63c4 100644 (file)
@@ -91,6 +91,7 @@ int main(void)
 #endif /* CONFIG_PPC64 */
 
        DEFINE(TI_FLAGS, offsetof(struct thread_info, flags));
+       DEFINE(TI_LOCAL_FLAGS, offsetof(struct thread_info, local_flags));
        DEFINE(TI_PREEMPT, offsetof(struct thread_info, preempt_count));
        DEFINE(TI_TASK, offsetof(struct thread_info, task));
 #ifdef CONFIG_PPC32
index b3a9794672250c4ba98c3710e4bef8b691a6a82e..8866fd26c6b97048dfb3c8142c95dcf4c43c3bcc 100644 (file)
@@ -128,37 +128,36 @@ transfer_to_handler:
        stw     r12,4(r11)
 #endif
        b       3f
+
 2:     /* if from kernel, check interrupted DOZE/NAP mode and
          * check for stack overflow
          */
+       lwz     r9,THREAD_INFO-THREAD(r12)
+       cmplw   r1,r9                   /* if r1 <= current->thread_info */
+       ble-    stack_ovf               /* then the kernel stack overflowed */
+5:
 #ifdef CONFIG_6xx
-       mfspr   r11,SPRN_HID0
-       mtcr    r11
-BEGIN_FTR_SECTION
-       bt-     8,4f                    /* Check DOZE */
-END_FTR_SECTION_IFSET(CPU_FTR_CAN_DOZE)
-BEGIN_FTR_SECTION
-       bt-     9,4f                    /* Check NAP */
-END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP)
+       tophys(r9,r9)                   /* check local flags */
+       lwz     r12,TI_LOCAL_FLAGS(r9)
+       mtcrf   0x01,r12
+       bt-     31-TLF_NAPPING,4f
 #endif /* CONFIG_6xx */
        .globl transfer_to_handler_cont
 transfer_to_handler_cont:
-       lwz     r11,THREAD_INFO-THREAD(r12)
-       cmplw   r1,r11                  /* if r1 <= current->thread_info */
-       ble-    stack_ovf               /* then the kernel stack overflowed */
 3:
        mflr    r9
        lwz     r11,0(r9)               /* virtual address of handler */
        lwz     r9,4(r9)                /* where to go when done */
-       FIX_SRR1(r10,r12)
        mtspr   SPRN_SRR0,r11
        mtspr   SPRN_SRR1,r10
        mtlr    r9
        SYNC
        RFI                             /* jump to handler, enable MMU */
 
-#ifdef CONFIG_6xx      
-4:     b       power_save_6xx_restore
+#ifdef CONFIG_6xx
+4:     rlwinm  r12,r12,0,~_TLF_NAPPING
+       stw     r12,TI_LOCAL_FLAGS(r9)
+       b       power_save_6xx_restore
 #endif
 
 /*
@@ -167,10 +166,10 @@ transfer_to_handler_cont:
  */
 stack_ovf:
        /* sometimes we use a statically-allocated stack, which is OK. */
-       lis     r11,_end@h
-       ori     r11,r11,_end@l
-       cmplw   r1,r11
-       ble     3b                      /* r1 <= &_end is OK */
+       lis     r12,_end@h
+       ori     r12,r12,_end@l
+       cmplw   r1,r12
+       ble     5b                      /* r1 <= &_end is OK */
        SAVE_NVGPRS(r11)
        addi    r3,r1,STACK_FRAME_OVERHEAD
        lis     r1,init_thread_union@ha
index a5ae04a57c784371c57b1a1e0dcaa6ab20fdac7d..b7d140430a41e4a4fc625161ad417211984a5570 100644 (file)
@@ -376,17 +376,53 @@ label##_common:                                           \
        bl      hdlr;                                   \
        b       .ret_from_except
 
+/*
+ * Like STD_EXCEPTION_COMMON, but for exceptions that can occur
+ * in the idle task and therefore need the special idle handling.
+ */
+#define STD_EXCEPTION_COMMON_IDLE(trap, label, hdlr)   \
+       .align  7;                                      \
+       .globl label##_common;                          \
+label##_common:                                                \
+       EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN);      \
+       FINISH_NAP;                                     \
+       DISABLE_INTS;                                   \
+       bl      .save_nvgprs;                           \
+       addi    r3,r1,STACK_FRAME_OVERHEAD;             \
+       bl      hdlr;                                   \
+       b       .ret_from_except
+
 #define STD_EXCEPTION_COMMON_LITE(trap, label, hdlr)   \
        .align  7;                                      \
        .globl label##_common;                          \
 label##_common:                                                \
        EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN);      \
+       FINISH_NAP;                                     \
        DISABLE_INTS;                                   \
        bl      .ppc64_runlatch_on;                     \
        addi    r3,r1,STACK_FRAME_OVERHEAD;             \
        bl      hdlr;                                   \
        b       .ret_from_except_lite
 
+/*
+ * When the idle code in power4_idle puts the CPU into NAP mode,
+ * it has to do so in a loop, and relies on the external interrupt
+ * and decrementer interrupt entry code to get it out of the loop.
+ * It sets the _TLF_NAPPING bit in current_thread_info()->local_flags
+ * to signal that it is in the loop and needs help to get out.
+ */
+#ifdef CONFIG_PPC_970_NAP
+#define FINISH_NAP                             \
+BEGIN_FTR_SECTION                              \
+       clrrdi  r11,r1,THREAD_SHIFT;            \
+       ld      r9,TI_LOCAL_FLAGS(r11);         \
+       andi.   r10,r9,_TLF_NAPPING;            \
+       bnel    power4_fixup_nap;               \
+END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP)
+#else
+#define FINISH_NAP
+#endif
+
 /*
  * Start of pSeries system interrupt routines
  */
@@ -772,6 +808,7 @@ hardware_interrupt_iSeries_masked:
        .globl machine_check_common
 machine_check_common:
        EXCEPTION_PROLOG_COMMON(0x200, PACA_EXMC)
+       FINISH_NAP
        DISABLE_INTS
        bl      .save_nvgprs
        addi    r3,r1,STACK_FRAME_OVERHEAD
@@ -783,7 +820,7 @@ machine_check_common:
        STD_EXCEPTION_COMMON(0xb00, trap_0b, .unknown_exception)
        STD_EXCEPTION_COMMON(0xd00, single_step, .single_step_exception)
        STD_EXCEPTION_COMMON(0xe00, trap_0e, .unknown_exception)
-       STD_EXCEPTION_COMMON(0xf00, performance_monitor, .performance_monitor_exception)
+       STD_EXCEPTION_COMMON_IDLE(0xf00, performance_monitor, .performance_monitor_exception)
        STD_EXCEPTION_COMMON(0x1300, instruction_breakpoint, .instruction_breakpoint_exception)
 #ifdef CONFIG_ALTIVEC
        STD_EXCEPTION_COMMON(0x1700, altivec_assist, .altivec_assist_exception)
@@ -1034,6 +1071,7 @@ unrecov_slb:
        .globl hardware_interrupt_entry
 hardware_interrupt_common:
        EXCEPTION_PROLOG_COMMON(0x500, PACA_EXGEN)
+       FINISH_NAP
 hardware_interrupt_entry:
        DISABLE_INTS
        bl      .ppc64_runlatch_on
@@ -1041,6 +1079,15 @@ hardware_interrupt_entry:
        bl      .do_IRQ
        b       .ret_from_except_lite
 
+#ifdef CONFIG_PPC_970_NAP
+power4_fixup_nap:
+       andc    r9,r9,r10
+       std     r9,TI_LOCAL_FLAGS(r11)
+       ld      r10,_LINK(r1)           /* make idle task do the */
+       std     r10,_NIP(r1)            /* equivalent of a blr */
+       blr
+#endif
+
        .align  7
        .globl alignment_common
 alignment_common:
index 12a4efbaa08f41a684bfe00cd5ab410037548288..b45fa0e37212526614c88f5e384a5f5d7a59e1c6 100644 (file)
@@ -22,8 +22,6 @@
 #include <asm/ppc_asm.h>
 #include <asm/asm-offsets.h>
 
-#undef DEBUG
-
        .text
 
 /*
@@ -109,12 +107,6 @@ BEGIN_FTR_SECTION
        dcbf    0,r4
        dcbf    0,r4
 END_FTR_SECTION_IFSET(CPU_FTR_NAP_DISABLE_L2_PR)
-#ifdef DEBUG
-       lis     r6,nap_enter_count@ha
-       lwz     r4,nap_enter_count@l(r6)
-       addi    r4,r4,1
-       stw     r4,nap_enter_count@l(r6)
-#endif 
 2:
 BEGIN_FTR_SECTION
        /* Go to low speed mode on some 750FX */
@@ -144,48 +136,42 @@ BEGIN_FTR_SECTION
        DSSALL
        sync
 END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
+       rlwinm  r9,r1,0,0,31-THREAD_SHIFT       /* current thread_info */
+       lwz     r8,TI_LOCAL_FLAGS(r9)   /* set napping bit */
+       ori     r8,r8,_TLF_NAPPING      /* so when we take an exception */
+       stw     r8,TI_LOCAL_FLAGS(r9)   /* it will return to our caller */
        mfmsr   r7
        ori     r7,r7,MSR_EE
        oris    r7,r7,MSR_POW@h
-       sync
-       isync
+1:     sync
        mtmsr   r7
        isync
-       sync
-       blr
-       
+       b       1b
+
 /*
  * Return from NAP/DOZE mode, restore some CPU specific registers,
  * we are called with DR/IR still off and r2 containing physical
- * address of current.
+ * address of current.  R11 points to the exception frame (physical
+ * address).  We have to preserve r10.
  */
 _GLOBAL(power_save_6xx_restore)
-       mfspr   r11,SPRN_HID0
-       rlwinm. r11,r11,0,10,8  /* Clear NAP & copy NAP bit !state to cr1 EQ */
-       cror    4*cr1+eq,4*cr0+eq,4*cr0+eq
-BEGIN_FTR_SECTION
-       rlwinm  r11,r11,0,9,7   /* Clear DOZE */
-END_FTR_SECTION_IFSET(CPU_FTR_CAN_DOZE)
-       mtspr   SPRN_HID0, r11
+       lwz     r9,_LINK(r11)           /* interrupted in ppc6xx_idle: */
+       stw     r9,_NIP(r11)            /* make it do a blr */
 
-#ifdef DEBUG
-       beq     cr1,1f
-       lis     r11,(nap_return_count-KERNELBASE)@ha
-       lwz     r9,nap_return_count@l(r11)
-       addi    r9,r9,1
-       stw     r9,nap_return_count@l(r11)
-1:
-#endif
-       
-       rlwinm  r9,r1,0,0,18
-       tophys(r9,r9)
-       lwz     r11,TI_CPU(r9)
+#ifdef CONFIG_SMP
+       mfspr   r12,SPRN_SPRG3
+       lwz     r11,TI_CPU(r12)         /* get cpu number * 4 */
        slwi    r11,r11,2
+#else
+       li      r11,0
+#endif
        /* Todo make sure all these are in the same page
-        * and load r22 (@ha part + CPU offset) only once
+        * and load r11 (@ha part + CPU offset) only once
         */
 BEGIN_FTR_SECTION
-       beq     cr1,1f
+       mfspr   r9,SPRN_HID0
+       andis.  r9,r9,HID0_NAP@h
+       beq     1f
        addis   r9,r11,(nap_save_msscr0-KERNELBASE)@ha
        lwz     r9,nap_save_msscr0@l(r9)
        mtspr   SPRN_MSSCR0, r9
@@ -210,10 +196,3 @@ _GLOBAL(nap_save_hid1)
 
 _GLOBAL(powersave_lowspeed)
        .long   0
-
-#ifdef DEBUG
-_GLOBAL(nap_enter_count)
-       .space  4
-_GLOBAL(nap_return_count)
-       .space  4
-#endif
index 6dad1c02496e723ee794f582216ea3077bf8f882..d85c7c938eed37f075c4eca9c95c0510b739d1aa 100644 (file)
@@ -35,12 +35,16 @@ BEGIN_FTR_SECTION
        DSSALL
        sync
 END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
+       clrrdi  r9,r1,THREAD_SHIFT      /* current thread_info */
+       ld      r8,TI_LOCAL_FLAGS(r9)   /* set napping bit */
+       ori     r8,r8,_TLF_NAPPING      /* so when we take an exception */
+       std     r8,TI_LOCAL_FLAGS(r9)   /* it will return to our caller */
        mfmsr   r7
        ori     r7,r7,MSR_EE
        oris    r7,r7,MSR_POW@h
-       sync
+1:     sync
        isync
        mtmsrd  r7
        isync
-       sync
-       blr
+       b       1b
+
index ffc7462d77ba752f1d803a73326a09a48531f026..88b553c6b26c9b461660b8de1f31c98c87c86a68 100644 (file)
@@ -37,6 +37,8 @@ struct thread_info {
        int             preempt_count;          /* 0 => preemptable,
                                                   <0 => BUG */
        struct restart_block restart_block;
+       unsigned long   local_flags;            /* private flags for thread */
+
        /* low level flags - has atomic operations done on it */
        unsigned long   flags ____cacheline_aligned_in_smp;
 };
@@ -143,6 +145,12 @@ static inline struct thread_info *current_thread_info(void)
                                 _TIF_NEED_RESCHED | _TIF_RESTORE_SIGMASK)
 #define _TIF_PERSYSCALL_MASK   (_TIF_RESTOREALL|_TIF_NOERROR)
 
+/* Bits in local_flags */
+/* Don't move TLF_NAPPING without adjusting the code in entry_32.S */
+#define TLF_NAPPING            0       /* idle thread enabled NAP mode */
+
+#define _TLF_NAPPING           (1 << TLF_NAPPING)
+
 #endif /* __KERNEL__ */
 
 #endif /* _ASM_POWERPC_THREAD_INFO_H */