#include <linux/mm.h>
#include <linux/ptrace.h>
-#ifdef CONFIG_X86_32
-#include <linux/uaccess.h>
-
-#include <asm/desc.h>
-
-/*
- * Return EIP plus the CS segment base. The segment limit is also
- * adjusted, clamped to the kernel/user address space (whichever is
- * appropriate), and returned in *eip_limit.
- *
- * The segment is checked, because it might have been changed by another
- * task between the original faulting instruction and here.
- *
- * If CS is no longer a valid code segment, or if EIP is beyond the
- * limit, or if it is a kernel address when CS is not a kernel segment,
- * then the returned value will be greater than *eip_limit.
- *
- * This is slow, but is very rarely executed.
- */
-unsigned long get_segment_eip(struct pt_regs *regs,
- unsigned long *eip_limit)
-{
- unsigned long ip = regs->ip;
- unsigned seg = regs->cs & 0xffff;
- u32 seg_ar, seg_limit, base, *desc;
-
- /* Unlikely, but must come before segment checks. */
- if (unlikely(regs->flags & VM_MASK)) {
- base = seg << 4;
- *eip_limit = base + 0xffff;
- return base + (ip & 0xffff);
- }
-
- /* The standard kernel/user address space limit. */
- *eip_limit = user_mode(regs) ? USER_DS.seg : KERNEL_DS.seg;
-
- /* By far the most common cases. */
- if (likely(SEGMENT_IS_FLAT_CODE(seg)))
- return ip;
-
- /* Check the segment exists, is within the current LDT/GDT size,
- that kernel/user (ring 0..3) has the appropriate privilege,
- that it's a code segment, and get the limit. */
- __asm__("larl %3,%0; lsll %3,%1"
- : "=&r" (seg_ar), "=r" (seg_limit) : "0" (0), "rm" (seg));
- if ((~seg_ar & 0x9800) || ip > seg_limit) {
- *eip_limit = 0;
- return 1; /* So that returned ip > *eip_limit. */
- }
-
- /* Get the GDT/LDT descriptor base.
- When you look for races in this code remember that
- LDT and other horrors are only used in user space. */
- if (seg & (1<<2)) {
- /* Must lock the LDT while reading it. */
- mutex_lock(¤t->mm->context.lock);
- desc = current->mm->context.ldt;
- desc = (void *)desc + (seg & ~7);
- } else {
- /* Must disable preemption while reading the GDT. */
- desc = (u32 *)get_cpu_gdt_table(get_cpu());
- desc = (void *)desc + (seg & ~7);
- }
-
- /* Decode the code segment base from the descriptor */
- base = get_desc_base((struct desc_struct *)desc);
-
- if (seg & (1<<2))
- mutex_unlock(¤t->mm->context.lock);
- else
- put_cpu();
-
- /* Adjust EIP and segment limit, and clamp at the kernel limit.
- It's legitimate for segments to wrap at 0xffffffff. */
- seg_limit += base;
- if (seg_limit < *eip_limit && seg_limit >= base)
- *eip_limit = seg_limit;
- return ip + base;
-}
-#endif
-
-#ifdef CONFIG_X86_32
-static
-#endif
unsigned long convert_ip_to_linear(struct task_struct *child, struct pt_regs *regs)
{
unsigned long addr, seg;
unsigned char *max_instr;
#ifdef CONFIG_X86_32
- unsigned long limit;
if (unlikely(boot_cpu_data.x86_vendor == X86_VENDOR_AMD &&
boot_cpu_data.x86 >= 6)) {
/* Catch an obscure case of prefetch inside an NX page. */
} else {
return 0;
}
- instr = (unsigned char *)get_segment_eip(regs, &limit);
#else
/* If it was a exec fault ignore */
if (error_code & PF_INSTR)
return 0;
- instr = (unsigned char __user *)convert_ip_to_linear(current, regs);
#endif
+ instr = (unsigned char *)convert_ip_to_linear(current, regs);
max_instr = instr + 15;
-#ifdef CONFIG_X86_64
if (user_mode(regs) && instr >= (unsigned char *)TASK_SIZE)
return 0;
-#endif
while (scan_more && instr < max_instr) {
unsigned char opcode;
unsigned char instr_hi;
unsigned char instr_lo;
-#ifdef CONFIG_X86_32
- if (instr > (unsigned char *)limit)
- break;
-#endif
if (probe_kernel_address(instr, opcode))
break;
case 0x00:
/* Prefetch instruction is 0x0F0D or 0x0F18 */
scan_more = 0;
-#ifdef CONFIG_X86_32
- if (instr > (unsigned char *)limit)
- break;
-#endif
+
if (probe_kernel_address(instr, opcode))
break;
prefetch = (instr_lo == 0xF) &&
unsigned char *max_instr;
#ifdef CONFIG_X86_32
- unsigned long limit;
if (unlikely(boot_cpu_data.x86_vendor == X86_VENDOR_AMD &&
boot_cpu_data.x86 >= 6)) {
/* Catch an obscure case of prefetch inside an NX page. */
} else {
return 0;
}
- instr = (unsigned char *)get_segment_eip(regs, &limit);
#else
/* If it was a exec fault ignore */
if (error_code & PF_INSTR)
return 0;
- instr = (unsigned char __user *)convert_ip_to_linear(current, regs);
#endif
+ instr = (unsigned char *)convert_ip_to_linear(current, regs);
max_instr = instr + 15;
-#ifdef CONFIG_X86_64
if (user_mode(regs) && instr >= (unsigned char *)TASK_SIZE)
return 0;
-#endif
while (scan_more && instr < max_instr) {
unsigned char opcode;
unsigned char instr_hi;
unsigned char instr_lo;
-#ifdef CONFIG_X86_32
- if (instr > (unsigned char *)limit)
- break;
-#endif
if (probe_kernel_address(instr, opcode))
break;
case 0x00:
/* Prefetch instruction is 0x0F0D or 0x0F18 */
scan_more = 0;
-#ifdef CONFIG_X86_32
- if (instr > (unsigned char *)limit)
- break;
-#endif
+
if (probe_kernel_address(instr, opcode))
break;
prefetch = (instr_lo == 0xF) &&