]> err.no Git - linux-2.6/commitdiff
iwlwifi: HW dependent run time calibration
authorEmmanuel Grumbach <emmanuel.grumbach@intel.com>
Wed, 16 Apr 2008 23:34:47 +0000 (16:34 -0700)
committerJohn W. Linville <linville@tuxdriver.com>
Wed, 7 May 2008 19:02:10 +0000 (15:02 -0400)
This patch does several things:

1) rename CONFIG_IWL4965_SENSITIVITY to IWL4965_RUN_TIME_CALIB which is
   better semantic
2) move all the run time calibration to a new file: iwl-calib.c
3) simplify the sensitivity calibration flow and make it HW dependent
4) make the chain noise calibration flow HW dependent

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
drivers/net/wireless/iwlwifi/Kconfig
drivers/net/wireless/iwlwifi/Makefile
drivers/net/wireless/iwlwifi/iwl-4965-commands.h
drivers/net/wireless/iwlwifi/iwl-4965.c
drivers/net/wireless/iwlwifi/iwl-4965.h
drivers/net/wireless/iwlwifi/iwl-calib.c [new file with mode: 0644]
drivers/net/wireless/iwlwifi/iwl-calib.h [new file with mode: 0644]
drivers/net/wireless/iwlwifi/iwl-core.h
drivers/net/wireless/iwlwifi/iwl4965-base.c

index d5b7a76fcaad62b3d684ad9bf697b4f27d9b3c59..a5fdd0f21a7a5c675f1dc4d64e12972339f81b25 100644 (file)
@@ -15,6 +15,15 @@ config IWLWIFI_LEDS
        bool
        default n
 
+config IWLWIFI_RUN_TIME_CALIB
+       bool
+       depends on IWLCORE
+       default n
+       ---help---
+         This option will enable run time calibration for the iwlwifi driver.
+         These calibrations are Sensitivity and Chain Noise.
+
+
 config IWLWIFI_RFKILL
        boolean "IWLWIFI RF kill support"
        depends on IWLCORE
@@ -68,12 +77,14 @@ config IWL4965_SPECTRUM_MEASUREMENT
        ---help---
          This option will enable spectrum measurement for the iwl4965 driver.
 
-config IWL4965_SENSITIVITY
-       bool "Enable Sensitivity Calibration in iwl4965 driver"
+config IWL4965_RUN_TIME_CALIB
+       bool "Enable run time Calibration for 4965 NIC"
+       select IWLWIFI_RUN_TIME_CALIB
        depends on IWL4965
+       default y
        ---help---
-         This option will enable sensitivity calibration for the iwl4965
-         driver.
+         This option will enable run time calibration for the iwl4965 driver.
+         These calibrations are Sensitivity and Chain Noise. If unsure, say yes
 
 config IWLWIFI_DEBUG
        bool "Enable full debugging output in iwl4965 driver"
index ec6187b75c3bd62f2bf216c7ceadcb5428debb7f..7bc569be4ba7f0fc0342ba6f17c289b74f2402a9 100644 (file)
@@ -3,6 +3,7 @@ iwlcore-objs            := iwl-core.o iwl-eeprom.o iwl-hcmd.o
 iwlcore-$(CONFIG_IWLWIFI_DEBUGFS) += iwl-debugfs.o
 iwlcore-$(CONFIG_IWLWIFI_LEDS) += iwl-led.o
 iwlcore-$(CONFIG_IWLWIFI_RFKILL) += iwl-rfkill.o
+iwlcore-$(CONFIG_IWLWIFI_RUN_TIME_CALIB) += iwl-calib.o
 
 obj-$(CONFIG_IWL3945)  += iwl3945.o
 iwl3945-objs           := iwl3945-base.o iwl-3945.o iwl-3945-rs.o
index 3bcd107e2d71bf441c2b3840043ceffe0048525f..c03c04fe14c7956248fdf71c145b362ce8be2e0c 100644 (file)
@@ -2559,7 +2559,7 @@ struct iwl4965_missed_beacon_notif {
  */
 
 /*
- * Table entries in SENSITIVITY_CMD (struct iwl4965_sensitivity_cmd)
+ * Table entries in SENSITIVITY_CMD (struct iwl_sensitivity_cmd)
  */
 #define HD_TABLE_SIZE  (11)    /* number of entries */
 #define HD_MIN_ENERGY_CCK_DET_INDEX                 (0)        /* table indexes */
@@ -2574,18 +2574,18 @@ struct iwl4965_missed_beacon_notif {
 #define HD_AUTO_CORR40_X4_TH_ADD_MIN_INDEX          (9)
 #define HD_OFDM_ENERGY_TH_IN_INDEX                  (10)
 
-/* Control field in struct iwl4965_sensitivity_cmd */
+/* Control field in struct iwl_sensitivity_cmd */
 #define SENSITIVITY_CMD_CONTROL_DEFAULT_TABLE  __constant_cpu_to_le16(0)
 #define SENSITIVITY_CMD_CONTROL_WORK_TABLE     __constant_cpu_to_le16(1)
 
 /**
- * struct iwl4965_sensitivity_cmd
+ * struct iwl_sensitivity_cmd
  * @control:  (1) updates working table, (0) updates default table
  * @table:  energy threshold values, use HD_* as index into table
  *
  * Always use "1" in "control" to update uCode's working table and DSP.
  */
-struct iwl4965_sensitivity_cmd {
+struct iwl_sensitivity_cmd {
        __le16 control;                 /* always use "1" */
        __le16 table[HD_TABLE_SIZE];    /* use HD_* as index */
 } __attribute__ ((packed));
index 17f629fb96ff2a0ed7299202473e11e15f281c31..be4cc5ffa742dc4f66c582fc62a7452e2fe1a623 100644 (file)
@@ -43,6 +43,7 @@
 #include "iwl-core.h"
 #include "iwl-io.h"
 #include "iwl-helpers.h"
+#include "iwl-calib.h"
 
 /* module parameters */
 static struct iwl_mod_params iwl4965_mod_params = {
@@ -1032,418 +1033,15 @@ void iwl4965_rf_kill_ct_config(struct iwl_priv *priv)
                IWL_DEBUG_INFO("REPLY_CT_KILL_CONFIG_CMD succeeded\n");
 }
 
-#ifdef CONFIG_IWL4965_SENSITIVITY
-
-/* "false alarms" are signals that our DSP tries to lock onto,
- *   but then determines that they are either noise, or transmissions
- *   from a distant wireless network (also "noise", really) that get
- *   "stepped on" by stronger transmissions within our own network.
- * This algorithm attempts to set a sensitivity level that is high
- *   enough to receive all of our own network traffic, but not so
- *   high that our DSP gets too busy trying to lock onto non-network
- *   activity/noise. */
-static int iwl4965_sens_energy_cck(struct iwl_priv *priv,
-                                  u32 norm_fa,
-                                  u32 rx_enable_time,
-                                  struct statistics_general_data *rx_info)
-{
-       u32 max_nrg_cck = 0;
-       int i = 0;
-       u8 max_silence_rssi = 0;
-       u32 silence_ref = 0;
-       u8 silence_rssi_a = 0;
-       u8 silence_rssi_b = 0;
-       u8 silence_rssi_c = 0;
-       u32 val;
-
-       /* "false_alarms" values below are cross-multiplications to assess the
-        *   numbers of false alarms within the measured period of actual Rx
-        *   (Rx is off when we're txing), vs the min/max expected false alarms
-        *   (some should be expected if rx is sensitive enough) in a
-        *   hypothetical listening period of 200 time units (TU), 204.8 msec:
-        *
-        * MIN_FA/fixed-time < false_alarms/actual-rx-time < MAX_FA/beacon-time
-        *
-        * */
-       u32 false_alarms = norm_fa * 200 * 1024;
-       u32 max_false_alarms = MAX_FA_CCK * rx_enable_time;
-       u32 min_false_alarms = MIN_FA_CCK * rx_enable_time;
-       struct iwl4965_sensitivity_data *data = NULL;
-
-       data = &(priv->sensitivity_data);
-
-       data->nrg_auto_corr_silence_diff = 0;
-
-       /* Find max silence rssi among all 3 receivers.
-        * This is background noise, which may include transmissions from other
-        *    networks, measured during silence before our network's beacon */
-       silence_rssi_a = (u8)((rx_info->beacon_silence_rssi_a &
-                           ALL_BAND_FILTER) >> 8);
-       silence_rssi_b = (u8)((rx_info->beacon_silence_rssi_b &
-                           ALL_BAND_FILTER) >> 8);
-       silence_rssi_c = (u8)((rx_info->beacon_silence_rssi_c &
-                           ALL_BAND_FILTER) >> 8);
-
-       val = max(silence_rssi_b, silence_rssi_c);
-       max_silence_rssi = max(silence_rssi_a, (u8) val);
-
-       /* Store silence rssi in 20-beacon history table */
-       data->nrg_silence_rssi[data->nrg_silence_idx] = max_silence_rssi;
-       data->nrg_silence_idx++;
-       if (data->nrg_silence_idx >= NRG_NUM_PREV_STAT_L)
-               data->nrg_silence_idx = 0;
-
-       /* Find max silence rssi across 20 beacon history */
-       for (i = 0; i < NRG_NUM_PREV_STAT_L; i++) {
-               val = data->nrg_silence_rssi[i];
-               silence_ref = max(silence_ref, val);
-       }
-       IWL_DEBUG_CALIB("silence a %u, b %u, c %u, 20-bcn max %u\n",
-                       silence_rssi_a, silence_rssi_b, silence_rssi_c,
-                       silence_ref);
-
-       /* Find max rx energy (min value!) among all 3 receivers,
-        *   measured during beacon frame.
-        * Save it in 10-beacon history table. */
-       i = data->nrg_energy_idx;
-       val = min(rx_info->beacon_energy_b, rx_info->beacon_energy_c);
-       data->nrg_value[i] = min(rx_info->beacon_energy_a, val);
-
-       data->nrg_energy_idx++;
-       if (data->nrg_energy_idx >= 10)
-               data->nrg_energy_idx = 0;
-
-       /* Find min rx energy (max value) across 10 beacon history.
-        * This is the minimum signal level that we want to receive well.
-        * Add backoff (margin so we don't miss slightly lower energy frames).
-        * This establishes an upper bound (min value) for energy threshold. */
-       max_nrg_cck = data->nrg_value[0];
-       for (i = 1; i < 10; i++)
-               max_nrg_cck = (u32) max(max_nrg_cck, (data->nrg_value[i]));
-       max_nrg_cck += 6;
-
-       IWL_DEBUG_CALIB("rx energy a %u, b %u, c %u, 10-bcn max/min %u\n",
-                       rx_info->beacon_energy_a, rx_info->beacon_energy_b,
-                       rx_info->beacon_energy_c, max_nrg_cck - 6);
-
-       /* Count number of consecutive beacons with fewer-than-desired
-        *   false alarms. */
-       if (false_alarms < min_false_alarms)
-               data->num_in_cck_no_fa++;
-       else
-               data->num_in_cck_no_fa = 0;
-       IWL_DEBUG_CALIB("consecutive bcns with few false alarms = %u\n",
-                       data->num_in_cck_no_fa);
-
-       /* If we got too many false alarms this time, reduce sensitivity */
-       if (false_alarms > max_false_alarms) {
-               IWL_DEBUG_CALIB("norm FA %u > max FA %u\n",
-                            false_alarms, max_false_alarms);
-               IWL_DEBUG_CALIB("... reducing sensitivity\n");
-               data->nrg_curr_state = IWL_FA_TOO_MANY;
-
-               if (data->auto_corr_cck > AUTO_CORR_MAX_TH_CCK) {
-                       /* Store for "fewer than desired" on later beacon */
-                       data->nrg_silence_ref = silence_ref;
-
-                       /* increase energy threshold (reduce nrg value)
-                        *   to decrease sensitivity */
-                       if (data->nrg_th_cck > (NRG_MAX_CCK + NRG_STEP_CCK))
-                               data->nrg_th_cck = data->nrg_th_cck
-                                                        - NRG_STEP_CCK;
-               }
-
-               /* increase auto_corr values to decrease sensitivity */
-               if (data->auto_corr_cck < AUTO_CORR_MAX_TH_CCK)
-                       data->auto_corr_cck = AUTO_CORR_MAX_TH_CCK + 1;
-               else {
-                       val = data->auto_corr_cck + AUTO_CORR_STEP_CCK;
-                       data->auto_corr_cck = min((u32)AUTO_CORR_MAX_CCK, val);
-               }
-               val = data->auto_corr_cck_mrc + AUTO_CORR_STEP_CCK;
-               data->auto_corr_cck_mrc = min((u32)AUTO_CORR_MAX_CCK_MRC, val);
-
-       /* Else if we got fewer than desired, increase sensitivity */
-       } else if (false_alarms < min_false_alarms) {
-               data->nrg_curr_state = IWL_FA_TOO_FEW;
-
-               /* Compare silence level with silence level for most recent
-                *   healthy number or too many false alarms */
-               data->nrg_auto_corr_silence_diff = (s32)data->nrg_silence_ref -
-                                                  (s32)silence_ref;
-
-               IWL_DEBUG_CALIB("norm FA %u < min FA %u, silence diff %d\n",
-                        false_alarms, min_false_alarms,
-                        data->nrg_auto_corr_silence_diff);
-
-               /* Increase value to increase sensitivity, but only if:
-                * 1a) previous beacon did *not* have *too many* false alarms
-                * 1b) AND there's a significant difference in Rx levels
-                *      from a previous beacon with too many, or healthy # FAs
-                * OR 2) We've seen a lot of beacons (100) with too few
-                *       false alarms */
-               if ((data->nrg_prev_state != IWL_FA_TOO_MANY) &&
-                       ((data->nrg_auto_corr_silence_diff > NRG_DIFF) ||
-                       (data->num_in_cck_no_fa > MAX_NUMBER_CCK_NO_FA))) {
-
-                       IWL_DEBUG_CALIB("... increasing sensitivity\n");
-                       /* Increase nrg value to increase sensitivity */
-                       val = data->nrg_th_cck + NRG_STEP_CCK;
-                       data->nrg_th_cck = min((u32)NRG_MIN_CCK, val);
-
-                       /* Decrease auto_corr values to increase sensitivity */
-                       val = data->auto_corr_cck - AUTO_CORR_STEP_CCK;
-                       data->auto_corr_cck = max((u32)AUTO_CORR_MIN_CCK, val);
-
-                       val = data->auto_corr_cck_mrc - AUTO_CORR_STEP_CCK;
-                       data->auto_corr_cck_mrc =
-                                        max((u32)AUTO_CORR_MIN_CCK_MRC, val);
-
-               } else
-                       IWL_DEBUG_CALIB("... but not changing sensitivity\n");
-
-       /* Else we got a healthy number of false alarms, keep status quo */
-       } else {
-               IWL_DEBUG_CALIB(" FA in safe zone\n");
-               data->nrg_curr_state = IWL_FA_GOOD_RANGE;
-
-               /* Store for use in "fewer than desired" with later beacon */
-               data->nrg_silence_ref = silence_ref;
-
-               /* If previous beacon had too many false alarms,
-                *   give it some extra margin by reducing sensitivity again
-                *   (but don't go below measured energy of desired Rx) */
-               if (IWL_FA_TOO_MANY == data->nrg_prev_state) {
-                       IWL_DEBUG_CALIB("... increasing margin\n");
-                       data->nrg_th_cck -= NRG_MARGIN;
-               }
-       }
-
-       /* Make sure the energy threshold does not go above the measured
-        * energy of the desired Rx signals (reduced by backoff margin),
-        * or else we might start missing Rx frames.
-        * Lower value is higher energy, so we use max()!
-        */
-       data->nrg_th_cck = max(max_nrg_cck, data->nrg_th_cck);
-       IWL_DEBUG_CALIB("new nrg_th_cck %u\n", data->nrg_th_cck);
-
-       data->nrg_prev_state = data->nrg_curr_state;
-
-       return 0;
-}
-
-
-static int iwl4965_sens_auto_corr_ofdm(struct iwl_priv *priv,
-                                      u32 norm_fa,
-                                      u32 rx_enable_time)
-{
-       u32 val;
-       u32 false_alarms = norm_fa * 200 * 1024;
-       u32 max_false_alarms = MAX_FA_OFDM * rx_enable_time;
-       u32 min_false_alarms = MIN_FA_OFDM * rx_enable_time;
-       struct iwl4965_sensitivity_data *data = NULL;
-
-       data = &(priv->sensitivity_data);
-
-       /* If we got too many false alarms this time, reduce sensitivity */
-       if (false_alarms > max_false_alarms) {
-
-               IWL_DEBUG_CALIB("norm FA %u > max FA %u)\n",
-                            false_alarms, max_false_alarms);
-
-               val = data->auto_corr_ofdm + AUTO_CORR_STEP_OFDM;
-               data->auto_corr_ofdm =
-                               min((u32)AUTO_CORR_MAX_OFDM, val);
-
-               val = data->auto_corr_ofdm_mrc + AUTO_CORR_STEP_OFDM;
-               data->auto_corr_ofdm_mrc =
-                               min((u32)AUTO_CORR_MAX_OFDM_MRC, val);
-
-               val = data->auto_corr_ofdm_x1 + AUTO_CORR_STEP_OFDM;
-               data->auto_corr_ofdm_x1 =
-                               min((u32)AUTO_CORR_MAX_OFDM_X1, val);
-
-               val = data->auto_corr_ofdm_mrc_x1 + AUTO_CORR_STEP_OFDM;
-               data->auto_corr_ofdm_mrc_x1 =
-                               min((u32)AUTO_CORR_MAX_OFDM_MRC_X1, val);
-       }
-
-       /* Else if we got fewer than desired, increase sensitivity */
-       else if (false_alarms < min_false_alarms) {
-
-               IWL_DEBUG_CALIB("norm FA %u < min FA %u\n",
-                            false_alarms, min_false_alarms);
-
-               val = data->auto_corr_ofdm - AUTO_CORR_STEP_OFDM;
-               data->auto_corr_ofdm =
-                               max((u32)AUTO_CORR_MIN_OFDM, val);
-
-               val = data->auto_corr_ofdm_mrc - AUTO_CORR_STEP_OFDM;
-               data->auto_corr_ofdm_mrc =
-                               max((u32)AUTO_CORR_MIN_OFDM_MRC, val);
-
-               val = data->auto_corr_ofdm_x1 - AUTO_CORR_STEP_OFDM;
-               data->auto_corr_ofdm_x1 =
-                               max((u32)AUTO_CORR_MIN_OFDM_X1, val);
-
-               val = data->auto_corr_ofdm_mrc_x1 - AUTO_CORR_STEP_OFDM;
-               data->auto_corr_ofdm_mrc_x1 =
-                               max((u32)AUTO_CORR_MIN_OFDM_MRC_X1, val);
-       }
-
-       else
-               IWL_DEBUG_CALIB("min FA %u < norm FA %u < max FA %u OK\n",
-                        min_false_alarms, false_alarms, max_false_alarms);
-
-       return 0;
-}
-
-static int iwl4965_sensitivity_callback(struct iwl_priv *priv,
-                                   struct iwl_cmd *cmd, struct sk_buff *skb)
-{
-       /* We didn't cache the SKB; let the caller free it */
-       return 1;
-}
-
-/* Prepare a SENSITIVITY_CMD, send to uCode if values have changed */
-static int iwl4965_sensitivity_write(struct iwl_priv *priv, u8 flags)
-{
-       struct iwl4965_sensitivity_cmd cmd ;
-       struct iwl4965_sensitivity_data *data = NULL;
-       struct iwl_host_cmd cmd_out = {
-               .id = SENSITIVITY_CMD,
-               .len = sizeof(struct iwl4965_sensitivity_cmd),
-               .meta.flags = flags,
-               .data = &cmd,
-       };
-       int ret;
-
-       data = &(priv->sensitivity_data);
-
-       memset(&cmd, 0, sizeof(cmd));
-
-       cmd.table[HD_AUTO_CORR32_X4_TH_ADD_MIN_INDEX] =
-                               cpu_to_le16((u16)data->auto_corr_ofdm);
-       cmd.table[HD_AUTO_CORR32_X4_TH_ADD_MIN_MRC_INDEX] =
-                               cpu_to_le16((u16)data->auto_corr_ofdm_mrc);
-       cmd.table[HD_AUTO_CORR32_X1_TH_ADD_MIN_INDEX] =
-                               cpu_to_le16((u16)data->auto_corr_ofdm_x1);
-       cmd.table[HD_AUTO_CORR32_X1_TH_ADD_MIN_MRC_INDEX] =
-                               cpu_to_le16((u16)data->auto_corr_ofdm_mrc_x1);
-
-       cmd.table[HD_AUTO_CORR40_X4_TH_ADD_MIN_INDEX] =
-                               cpu_to_le16((u16)data->auto_corr_cck);
-       cmd.table[HD_AUTO_CORR40_X4_TH_ADD_MIN_MRC_INDEX] =
-                               cpu_to_le16((u16)data->auto_corr_cck_mrc);
-
-       cmd.table[HD_MIN_ENERGY_CCK_DET_INDEX] =
-                               cpu_to_le16((u16)data->nrg_th_cck);
-       cmd.table[HD_MIN_ENERGY_OFDM_DET_INDEX] =
-                               cpu_to_le16((u16)data->nrg_th_ofdm);
-
-       cmd.table[HD_BARKER_CORR_TH_ADD_MIN_INDEX] =
-                               __constant_cpu_to_le16(190);
-       cmd.table[HD_BARKER_CORR_TH_ADD_MIN_MRC_INDEX] =
-                               __constant_cpu_to_le16(390);
-       cmd.table[HD_OFDM_ENERGY_TH_IN_INDEX] =
-                               __constant_cpu_to_le16(62);
-
-       IWL_DEBUG_CALIB("ofdm: ac %u mrc %u x1 %u mrc_x1 %u thresh %u\n",
-                       data->auto_corr_ofdm, data->auto_corr_ofdm_mrc,
-                       data->auto_corr_ofdm_x1, data->auto_corr_ofdm_mrc_x1,
-                       data->nrg_th_ofdm);
-
-       IWL_DEBUG_CALIB("cck: ac %u mrc %u thresh %u\n",
-                       data->auto_corr_cck, data->auto_corr_cck_mrc,
-                       data->nrg_th_cck);
-
-       /* Update uCode's "work" table, and copy it to DSP */
-       cmd.control = SENSITIVITY_CMD_CONTROL_WORK_TABLE;
-
-       if (flags & CMD_ASYNC)
-               cmd_out.meta.u.callback = iwl4965_sensitivity_callback;
-
-       /* Don't send command to uCode if nothing has changed */
-       if (!memcmp(&cmd.table[0], &(priv->sensitivity_tbl[0]),
-                   sizeof(u16)*HD_TABLE_SIZE)) {
-               IWL_DEBUG_CALIB("No change in SENSITIVITY_CMD\n");
-               return 0;
-       }
-
-       /* Copy table for comparison next time */
-       memcpy(&(priv->sensitivity_tbl[0]), &(cmd.table[0]),
-              sizeof(u16)*HD_TABLE_SIZE);
-
-       ret = iwl_send_cmd(priv, &cmd_out);
-       if (ret)
-               IWL_ERROR("SENSITIVITY_CMD failed\n");
-
-       return ret;
-}
-
-void iwl4965_init_sensitivity(struct iwl_priv *priv, u8 flags, u8 force)
-{
-       struct iwl4965_sensitivity_data *data = NULL;
-       int i;
-       int ret  = 0;
-
-       IWL_DEBUG_CALIB("Start iwl4965_init_sensitivity\n");
-
-       if (force)
-               memset(&(priv->sensitivity_tbl[0]), 0,
-                       sizeof(u16)*HD_TABLE_SIZE);
-
-       /* Clear driver's sensitivity algo data */
-       data = &(priv->sensitivity_data);
-       memset(data, 0, sizeof(struct iwl4965_sensitivity_data));
-
-       data->num_in_cck_no_fa = 0;
-       data->nrg_curr_state = IWL_FA_TOO_MANY;
-       data->nrg_prev_state = IWL_FA_TOO_MANY;
-       data->nrg_silence_ref = 0;
-       data->nrg_silence_idx = 0;
-       data->nrg_energy_idx = 0;
-
-       for (i = 0; i < 10; i++)
-               data->nrg_value[i] = 0;
-
-       for (i = 0; i < NRG_NUM_PREV_STAT_L; i++)
-               data->nrg_silence_rssi[i] = 0;
-
-       data->auto_corr_ofdm = 90;
-       data->auto_corr_ofdm_mrc = 170;
-       data->auto_corr_ofdm_x1  = 105;
-       data->auto_corr_ofdm_mrc_x1 = 220;
-       data->auto_corr_cck = AUTO_CORR_CCK_MIN_VAL_DEF;
-       data->auto_corr_cck_mrc = 200;
-       data->nrg_th_cck = 100;
-       data->nrg_th_ofdm = 100;
-
-       data->last_bad_plcp_cnt_ofdm = 0;
-       data->last_fa_cnt_ofdm = 0;
-       data->last_bad_plcp_cnt_cck = 0;
-       data->last_fa_cnt_cck = 0;
-
-       /* Clear prior Sensitivity command data to force send to uCode */
-       if (force)
-               memset(&(priv->sensitivity_tbl[0]), 0,
-                   sizeof(u16)*HD_TABLE_SIZE);
-
-       ret |= iwl4965_sensitivity_write(priv, flags);
-       IWL_DEBUG_CALIB("<<return 0x%X\n", ret);
-
-       return;
-}
-
+#ifdef CONFIG_IWL4965_RUN_TIME_CALIB
 
 /* Reset differential Rx gains in NIC to prepare for chain noise calibration.
  * Called after every association, but this runs only once!
  *  ... once chain noise is calibrated the first time, it's good forever.  */
-void iwl4965_chain_noise_reset(struct iwl_priv *priv)
+static void iwl4965_chain_noise_reset(struct iwl_priv *priv)
 {
-       struct iwl4965_chain_noise_data *data = NULL;
+       struct iwl_chain_noise_data *data = &(priv->chain_noise_data);
 
-       data = &(priv->chain_noise_data);
        if ((data->state == IWL_CHAIN_NOISE_ALIVE) && iwl_is_associated(priv)) {
                struct iwl4965_calibration_cmd cmd;
 
@@ -1452,357 +1050,76 @@ void iwl4965_chain_noise_reset(struct iwl_priv *priv)
                cmd.diff_gain_a = 0;
                cmd.diff_gain_b = 0;
                cmd.diff_gain_c = 0;
-               iwl_send_cmd_pdu_async(priv, REPLY_PHY_CALIBRATION_CMD,
-                                sizeof(cmd), &cmd, NULL);
-               msleep(4);
+               if (iwl_send_cmd_pdu(priv, REPLY_PHY_CALIBRATION_CMD,
+                                sizeof(cmd), &cmd))
+                       IWL_ERROR("Could not send REPLY_PHY_CALIBRATION_CMD\n");
                data->state = IWL_CHAIN_NOISE_ACCUMULATE;
                IWL_DEBUG_CALIB("Run chain_noise_calibrate\n");
        }
-       return;
 }
 
-/*
- * Accumulate 20 beacons of signal and noise statistics for each of
- *   3 receivers/antennas/rx-chains, then figure out:
- * 1)  Which antennas are connected.
- * 2)  Differential rx gain settings to balance the 3 receivers.
- */
-static void iwl4965_noise_calibration(struct iwl_priv *priv,
-                                     struct iwl4965_notif_statistics *stat_resp)
+static void iwl4965_gain_computation(struct iwl_priv *priv,
+               u32 *average_noise,
+               u16 min_average_noise_antenna_i,
+               u32 min_average_noise)
 {
-       struct iwl4965_chain_noise_data *data = NULL;
-       int ret = 0;
-
-       u32 chain_noise_a;
-       u32 chain_noise_b;
-       u32 chain_noise_c;
-       u32 chain_sig_a;
-       u32 chain_sig_b;
-       u32 chain_sig_c;
-       u32 average_sig[NUM_RX_CHAINS] = {INITIALIZATION_VALUE};
-       u32 average_noise[NUM_RX_CHAINS] = {INITIALIZATION_VALUE};
-       u32 max_average_sig;
-       u16 max_average_sig_antenna_i;
-       u32 min_average_noise = MIN_AVERAGE_NOISE_MAX_VALUE;
-       u16 min_average_noise_antenna_i = INITIALIZATION_VALUE;
-       u16 i = 0;
-       u16 chan_num = INITIALIZATION_VALUE;
-       u32 band = INITIALIZATION_VALUE;
-       u32 active_chains = 0;
-       unsigned long flags;
-       struct statistics_rx_non_phy *rx_info = &(stat_resp->rx.general);
-
-       data = &(priv->chain_noise_data);
+       int i, ret;
+       struct iwl_chain_noise_data *data = &priv->chain_noise_data;
 
-       /* Accumulate just the first 20 beacons after the first association,
-        *   then we're done forever. */
-       if (data->state != IWL_CHAIN_NOISE_ACCUMULATE) {
-               if (data->state == IWL_CHAIN_NOISE_ALIVE)
-                       IWL_DEBUG_CALIB("Wait for noise calib reset\n");
-               return;
-       }
-
-       spin_lock_irqsave(&priv->lock, flags);
-       if (rx_info->interference_data_flag != INTERFERENCE_DATA_AVAILABLE) {
-               IWL_DEBUG_CALIB(" << Interference data unavailable\n");
-               spin_unlock_irqrestore(&priv->lock, flags);
-               return;
-       }
-
-       band = (priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) ? 0 : 1;
-       chan_num = le16_to_cpu(priv->staging_rxon.channel);
-
-       /* Make sure we accumulate data for just the associated channel
-        *   (even if scanning). */
-       if ((chan_num != (le32_to_cpu(stat_resp->flag) >> 16)) ||
-           ((STATISTICS_REPLY_FLG_BAND_24G_MSK ==
-            (stat_resp->flag & STATISTICS_REPLY_FLG_BAND_24G_MSK)) && band)) {
-               IWL_DEBUG_CALIB("Stats not from chan=%d, band=%d\n",
-                               chan_num, band);
-               spin_unlock_irqrestore(&priv->lock, flags);
-               return;
-       }
-
-       /* Accumulate beacon statistics values across 20 beacons */
-       chain_noise_a = le32_to_cpu(rx_info->beacon_silence_rssi_a) &
-                               IN_BAND_FILTER;
-       chain_noise_b = le32_to_cpu(rx_info->beacon_silence_rssi_b) &
-                               IN_BAND_FILTER;
-       chain_noise_c = le32_to_cpu(rx_info->beacon_silence_rssi_c) &
-                               IN_BAND_FILTER;
-
-       chain_sig_a = le32_to_cpu(rx_info->beacon_rssi_a) & IN_BAND_FILTER;
-       chain_sig_b = le32_to_cpu(rx_info->beacon_rssi_b) & IN_BAND_FILTER;
-       chain_sig_c = le32_to_cpu(rx_info->beacon_rssi_c) & IN_BAND_FILTER;
+       data->delta_gain_code[min_average_noise_antenna_i] = 0;
 
-       spin_unlock_irqrestore(&priv->lock, flags);
+       for (i = 0; i < NUM_RX_CHAINS; i++) {
+               s32 delta_g = 0;
 
-       data->beacon_count++;
-
-       data->chain_noise_a = (chain_noise_a + data->chain_noise_a);
-       data->chain_noise_b = (chain_noise_b + data->chain_noise_b);
-       data->chain_noise_c = (chain_noise_c + data->chain_noise_c);
-
-       data->chain_signal_a = (chain_sig_a + data->chain_signal_a);
-       data->chain_signal_b = (chain_sig_b + data->chain_signal_b);
-       data->chain_signal_c = (chain_sig_c + data->chain_signal_c);
-
-       IWL_DEBUG_CALIB("chan=%d, band=%d, beacon=%d\n", chan_num, band,
-                       data->beacon_count);
-       IWL_DEBUG_CALIB("chain_sig: a %d b %d c %d\n",
-                       chain_sig_a, chain_sig_b, chain_sig_c);
-       IWL_DEBUG_CALIB("chain_noise: a %d b %d c %d\n",
-                       chain_noise_a, chain_noise_b, chain_noise_c);
-
-       /* If this is the 20th beacon, determine:
-        * 1)  Disconnected antennas (using signal strengths)
-        * 2)  Differential gain (using silence noise) to balance receivers */
-       if (data->beacon_count == CAL_NUM_OF_BEACONS) {
-
-               /* Analyze signal for disconnected antenna */
-               average_sig[0] = (data->chain_signal_a) / CAL_NUM_OF_BEACONS;
-               average_sig[1] = (data->chain_signal_b) / CAL_NUM_OF_BEACONS;
-               average_sig[2] = (data->chain_signal_c) / CAL_NUM_OF_BEACONS;
-
-               if (average_sig[0] >= average_sig[1]) {
-                       max_average_sig = average_sig[0];
-                       max_average_sig_antenna_i = 0;
-                       active_chains = (1 << max_average_sig_antenna_i);
-               } else {
-                       max_average_sig = average_sig[1];
-                       max_average_sig_antenna_i = 1;
-                       active_chains = (1 << max_average_sig_antenna_i);
-               }
-
-               if (average_sig[2] >= max_average_sig) {
-                       max_average_sig = average_sig[2];
-                       max_average_sig_antenna_i = 2;
-                       active_chains = (1 << max_average_sig_antenna_i);
-               }
-
-               IWL_DEBUG_CALIB("average_sig: a %d b %d c %d\n",
-                            average_sig[0], average_sig[1], average_sig[2]);
-               IWL_DEBUG_CALIB("max_average_sig = %d, antenna %d\n",
-                            max_average_sig, max_average_sig_antenna_i);
-
-               /* Compare signal strengths for all 3 receivers. */
-               for (i = 0; i < NUM_RX_CHAINS; i++) {
-                       if (i != max_average_sig_antenna_i) {
-                               s32 rssi_delta = (max_average_sig -
-                                                 average_sig[i]);
-
-                               /* If signal is very weak, compared with
-                                * strongest, mark it as disconnected. */
-                               if (rssi_delta > MAXIMUM_ALLOWED_PATHLOSS)
-                                       data->disconn_array[i] = 1;
-                               else
-                                       active_chains |= (1 << i);
-                       IWL_DEBUG_CALIB("i = %d  rssiDelta = %d  "
-                                    "disconn_array[i] = %d\n",
-                                    i, rssi_delta, data->disconn_array[i]);
-                       }
-               }
-
-               /*If both chains A & B are disconnected -
-                * connect B and leave A as is */
-               if (data->disconn_array[CHAIN_A] &&
-                   data->disconn_array[CHAIN_B]) {
-                       data->disconn_array[CHAIN_B] = 0;
-                       active_chains |= (1 << CHAIN_B);
-                       IWL_DEBUG_CALIB("both A & B chains are disconnected! "
-                                    "W/A - declare B as connected\n");
-               }
-
-               IWL_DEBUG_CALIB("active_chains (bitwise) = 0x%x\n",
-                               active_chains);
-
-               /* Save for use within RXON, TX, SCAN commands, etc. */
-               priv->valid_antenna = active_chains;
-
-               /* Analyze noise for rx balance */
-               average_noise[0] = ((data->chain_noise_a)/CAL_NUM_OF_BEACONS);
-               average_noise[1] = ((data->chain_noise_b)/CAL_NUM_OF_BEACONS);
-               average_noise[2] = ((data->chain_noise_c)/CAL_NUM_OF_BEACONS);
-
-               for (i = 0; i < NUM_RX_CHAINS; i++) {
-                       if (!(data->disconn_array[i]) &&
-                          (average_noise[i] <= min_average_noise)) {
-                               /* This means that chain i is active and has
-                                * lower noise values so far: */
-                               min_average_noise = average_noise[i];
-                               min_average_noise_antenna_i = i;
-                       }
-               }
-
-               data->delta_gain_code[min_average_noise_antenna_i] = 0;
-
-               IWL_DEBUG_CALIB("average_noise: a %d b %d c %d\n",
-                               average_noise[0], average_noise[1],
-                               average_noise[2]);
-
-               IWL_DEBUG_CALIB("min_average_noise = %d, antenna %d\n",
-                               min_average_noise, min_average_noise_antenna_i);
-
-               for (i = 0; i < NUM_RX_CHAINS; i++) {
-                       s32 delta_g = 0;
-
-                       if (!(data->disconn_array[i]) &&
-                           (data->delta_gain_code[i] ==
+               if (!(data->disconn_array[i]) &&
+                   (data->delta_gain_code[i] ==
                             CHAIN_NOISE_DELTA_GAIN_INIT_VAL)) {
-                               delta_g = average_noise[i] - min_average_noise;
-                               data->delta_gain_code[i] = (u8)((delta_g *
-                                                                   10) / 15);
-                               if (CHAIN_NOISE_MAX_DELTA_GAIN_CODE <
-                                  data->delta_gain_code[i])
-                                       data->delta_gain_code[i] =
-                                         CHAIN_NOISE_MAX_DELTA_GAIN_CODE;
-
-                               data->delta_gain_code[i] =
-                                       (data->delta_gain_code[i] | (1 << 2));
-                       } else
-                               data->delta_gain_code[i] = 0;
-               }
-               IWL_DEBUG_CALIB("delta_gain_codes: a %d b %d c %d\n",
-                            data->delta_gain_code[0],
-                            data->delta_gain_code[1],
-                            data->delta_gain_code[2]);
-
-               /* Differential gain gets sent to uCode only once */
-               if (!data->radio_write) {
-                       struct iwl4965_calibration_cmd cmd;
-                       data->radio_write = 1;
-
-                       memset(&cmd, 0, sizeof(cmd));
-                       cmd.opCode = PHY_CALIBRATE_DIFF_GAIN_CMD;
-                       cmd.diff_gain_a = data->delta_gain_code[0];
-                       cmd.diff_gain_b = data->delta_gain_code[1];
-                       cmd.diff_gain_c = data->delta_gain_code[2];
-                       ret = iwl_send_cmd_pdu(priv, REPLY_PHY_CALIBRATION_CMD,
-                                             sizeof(cmd), &cmd);
-                       if (ret)
-                               IWL_DEBUG_CALIB("fail sending cmd "
-                                            "REPLY_PHY_CALIBRATION_CMD \n");
-
-                       /* TODO we might want recalculate
-                        * rx_chain in rxon cmd */
-
-                       /* Mark so we run this algo only once! */
-                       data->state = IWL_CHAIN_NOISE_CALIBRATED;
+                       delta_g = average_noise[i] - min_average_noise;
+                       data->delta_gain_code[i] = (u8)((delta_g * 10) / 15);
+                       data->delta_gain_code[i] =
+                               min(data->delta_gain_code[i],
+                               (u8) CHAIN_NOISE_MAX_DELTA_GAIN_CODE);
+
+                       data->delta_gain_code[i] =
+                               (data->delta_gain_code[i] | (1 << 2));
+               } else {
+                       data->delta_gain_code[i] = 0;
                }
-               data->chain_noise_a = 0;
-               data->chain_noise_b = 0;
-               data->chain_noise_c = 0;
-               data->chain_signal_a = 0;
-               data->chain_signal_b = 0;
-               data->chain_signal_c = 0;
-               data->beacon_count = 0;
-       }
-       return;
-}
-
-static void iwl4965_sensitivity_calibration(struct iwl_priv *priv,
-                                           struct iwl4965_notif_statistics *resp)
-{
-       u32 rx_enable_time;
-       u32 fa_cck;
-       u32 fa_ofdm;
-       u32 bad_plcp_cck;
-       u32 bad_plcp_ofdm;
-       u32 norm_fa_ofdm;
-       u32 norm_fa_cck;
-       struct iwl4965_sensitivity_data *data = NULL;
-       struct statistics_rx_non_phy *rx_info = &(resp->rx.general);
-       struct statistics_rx *statistics = &(resp->rx);
-       unsigned long flags;
-       struct statistics_general_data statis;
-       int ret;
-
-       data = &(priv->sensitivity_data);
-
-       if (!iwl_is_associated(priv)) {
-               IWL_DEBUG_CALIB("<< - not associated\n");
-               return;
-       }
-
-       spin_lock_irqsave(&priv->lock, flags);
-       if (rx_info->interference_data_flag != INTERFERENCE_DATA_AVAILABLE) {
-               IWL_DEBUG_CALIB("<< invalid data.\n");
-               spin_unlock_irqrestore(&priv->lock, flags);
-               return;
-       }
-
-       /* Extract Statistics: */
-       rx_enable_time = le32_to_cpu(rx_info->channel_load);
-       fa_cck = le32_to_cpu(statistics->cck.false_alarm_cnt);
-       fa_ofdm = le32_to_cpu(statistics->ofdm.false_alarm_cnt);
-       bad_plcp_cck = le32_to_cpu(statistics->cck.plcp_err);
-       bad_plcp_ofdm = le32_to_cpu(statistics->ofdm.plcp_err);
-
-       statis.beacon_silence_rssi_a =
-                       le32_to_cpu(statistics->general.beacon_silence_rssi_a);
-       statis.beacon_silence_rssi_b =
-                       le32_to_cpu(statistics->general.beacon_silence_rssi_b);
-       statis.beacon_silence_rssi_c =
-                       le32_to_cpu(statistics->general.beacon_silence_rssi_c);
-       statis.beacon_energy_a =
-                       le32_to_cpu(statistics->general.beacon_energy_a);
-       statis.beacon_energy_b =
-                       le32_to_cpu(statistics->general.beacon_energy_b);
-       statis.beacon_energy_c =
-                       le32_to_cpu(statistics->general.beacon_energy_c);
-
-       spin_unlock_irqrestore(&priv->lock, flags);
-
-       IWL_DEBUG_CALIB("rx_enable_time = %u usecs\n", rx_enable_time);
-
-       if (!rx_enable_time) {
-               IWL_DEBUG_CALIB("<< RX Enable Time == 0! \n");
-               return;
-       }
-
-       /* These statistics increase monotonically, and do not reset
-        *   at each beacon.  Calculate difference from last value, or just
-        *   use the new statistics value if it has reset or wrapped around. */
-       if (data->last_bad_plcp_cnt_cck > bad_plcp_cck)
-               data->last_bad_plcp_cnt_cck = bad_plcp_cck;
-       else {
-               bad_plcp_cck -= data->last_bad_plcp_cnt_cck;
-               data->last_bad_plcp_cnt_cck += bad_plcp_cck;
-       }
-
-       if (data->last_bad_plcp_cnt_ofdm > bad_plcp_ofdm)
-               data->last_bad_plcp_cnt_ofdm = bad_plcp_ofdm;
-       else {
-               bad_plcp_ofdm -= data->last_bad_plcp_cnt_ofdm;
-               data->last_bad_plcp_cnt_ofdm += bad_plcp_ofdm;
        }
+       IWL_DEBUG_CALIB("delta_gain_codes: a %d b %d c %d\n",
+                    data->delta_gain_code[0],
+                    data->delta_gain_code[1],
+                    data->delta_gain_code[2]);
 
-       if (data->last_fa_cnt_ofdm > fa_ofdm)
-               data->last_fa_cnt_ofdm = fa_ofdm;
-       else {
-               fa_ofdm -= data->last_fa_cnt_ofdm;
-               data->last_fa_cnt_ofdm += fa_ofdm;
-       }
+       /* Differential gain gets sent to uCode only once */
+       if (!data->radio_write) {
+               struct iwl4965_calibration_cmd cmd;
+               data->radio_write = 1;
 
-       if (data->last_fa_cnt_cck > fa_cck)
-               data->last_fa_cnt_cck = fa_cck;
-       else {
-               fa_cck -= data->last_fa_cnt_cck;
-               data->last_fa_cnt_cck += fa_cck;
+               memset(&cmd, 0, sizeof(cmd));
+               cmd.opCode = PHY_CALIBRATE_DIFF_GAIN_CMD;
+               cmd.diff_gain_a = data->delta_gain_code[0];
+               cmd.diff_gain_b = data->delta_gain_code[1];
+               cmd.diff_gain_c = data->delta_gain_code[2];
+               ret = iwl_send_cmd_pdu(priv, REPLY_PHY_CALIBRATION_CMD,
+                                     sizeof(cmd), &cmd);
+               if (ret)
+                       IWL_DEBUG_CALIB("fail sending cmd "
+                                    "REPLY_PHY_CALIBRATION_CMD \n");
+
+               /* TODO we might want recalculate
+                * rx_chain in rxon cmd */
+
+               /* Mark so we run this algo only once! */
+               data->state = IWL_CHAIN_NOISE_CALIBRATED;
        }
-
-       /* Total aborted signal locks */
-       norm_fa_ofdm = fa_ofdm + bad_plcp_ofdm;
-       norm_fa_cck = fa_cck + bad_plcp_cck;
-
-       IWL_DEBUG_CALIB("cck: fa %u badp %u  ofdm: fa %u badp %u\n", fa_cck,
-                       bad_plcp_cck, fa_ofdm, bad_plcp_ofdm);
-
-       iwl4965_sens_auto_corr_ofdm(priv, norm_fa_ofdm, rx_enable_time);
-       iwl4965_sens_energy_cck(priv, norm_fa_cck, rx_enable_time, &statis);
-       ret = iwl4965_sensitivity_write(priv, CMD_ASYNC);
-
-       return;
+       data->chain_noise_a = 0;
+       data->chain_noise_b = 0;
+       data->chain_noise_c = 0;
+       data->chain_signal_a = 0;
+       data->chain_signal_b = 0;
+       data->chain_signal_c = 0;
+       data->beacon_count = 0;
 }
 
 static void iwl4965_bg_sensitivity_work(struct work_struct *work)
@@ -1819,21 +1136,15 @@ static void iwl4965_bg_sensitivity_work(struct work_struct *work)
        }
 
        if (priv->start_calib) {
-               iwl4965_noise_calibration(priv, &priv->statistics);
-
-               if (priv->sensitivity_data.state ==
-                                       IWL_SENS_CALIB_NEED_REINIT) {
-                       iwl4965_init_sensitivity(priv, CMD_ASYNC, 0);
-                       priv->sensitivity_data.state = IWL_SENS_CALIB_ALLOWED;
-               } else
-                       iwl4965_sensitivity_calibration(priv,
-                                       &priv->statistics);
+               iwl_chain_noise_calibration(priv, &priv->statistics);
+
+               iwl_sensitivity_calibration(priv, &priv->statistics);
        }
 
        mutex_unlock(&priv->mutex);
        return;
 }
-#endif /*CONFIG_IWL4965_SENSITIVITY*/
+#endif /*CONFIG_IWL4965_RUN_TIME_CALIB*/
 
 static void iwl4965_bg_txpower_work(struct work_struct *work)
 {
@@ -1932,15 +1243,15 @@ int iwl4965_alive_notify(struct iwl_priv *priv)
 
        spin_lock_irqsave(&priv->lock, flags);
 
-#ifdef CONFIG_IWL4965_SENSITIVITY
+#ifdef CONFIG_IWL4965_RUN_TIME_CALIB
        memset(&(priv->sensitivity_data), 0,
-              sizeof(struct iwl4965_sensitivity_data));
+              sizeof(struct iwl_sensitivity_data));
        memset(&(priv->chain_noise_data), 0,
-              sizeof(struct iwl4965_chain_noise_data));
+              sizeof(struct iwl_chain_noise_data));
        for (i = 0; i < NUM_RX_CHAINS; i++)
                priv->chain_noise_data.delta_gain_code[i] =
                                CHAIN_NOISE_DELTA_GAIN_INIT_VAL;
-#endif /* CONFIG_IWL4965_SENSITIVITY*/
+#endif /* CONFIG_IWL4965_RUN_TIME_CALIB*/
        ret = iwl_grab_nic_access(priv);
        if (ret) {
                spin_unlock_irqrestore(&priv->lock, flags);
@@ -2013,6 +1324,31 @@ int iwl4965_alive_notify(struct iwl_priv *priv)
        return ret;
 }
 
+#ifdef CONFIG_IWL4965_RUN_TIME_CALIB
+static struct iwl_sensitivity_ranges iwl4965_sensitivity = {
+       .min_nrg_cck = 97,
+       .max_nrg_cck = 0,
+
+       .auto_corr_min_ofdm = 85,
+       .auto_corr_min_ofdm_mrc = 170,
+       .auto_corr_min_ofdm_x1 = 105,
+       .auto_corr_min_ofdm_mrc_x1 = 220,
+
+       .auto_corr_max_ofdm = 120,
+       .auto_corr_max_ofdm_mrc = 210,
+       .auto_corr_max_ofdm_x1 = 140,
+       .auto_corr_max_ofdm_mrc_x1 = 270,
+
+       .auto_corr_min_cck = 125,
+       .auto_corr_max_cck = 200,
+       .auto_corr_min_cck_mrc = 200,
+       .auto_corr_max_cck_mrc = 400,
+
+       .nrg_th_cck = 100,
+       .nrg_th_ofdm = 100,
+};
+#endif
+
 /**
  * iwl4965_hw_set_hw_params
  *
@@ -2044,6 +1380,9 @@ int iwl4965_hw_set_hw_params(struct iwl_priv *priv)
        priv->hw_params.rx_chains_num = 2;
        priv->hw_params.valid_tx_ant = (IWL_ANTENNA_MAIN | IWL_ANTENNA_AUX);
        priv->hw_params.valid_rx_ant = (IWL_ANTENNA_MAIN | IWL_ANTENNA_AUX);
+#ifdef CONFIG_IWL4965_RUN_TIME_CALIB
+       priv->hw_params.sens = &iwl4965_sensitivity;
+#endif
 
        return 0;
 }
@@ -3202,7 +2541,7 @@ void iwl4965_set_rxon_chain(struct iwl_priv *priv)
 
        /* Tell uCode which antennas are actually connected.
         * Before first association, we assume all antennas are connected.
-        * Just after first association, iwl4965_noise_calibration()
+        * Just after first association, iwl_chain_noise_calibration()
         *    checks which antennas actually *are* connected. */
        priv->staging_rxon.rx_chain |=
            cpu_to_le16(priv->valid_antenna << RXON_RX_CHAIN_VALID_POS);
@@ -3412,7 +2751,7 @@ void iwl4965_hw_rx_statistics(struct iwl_priv *priv, struct iwl4965_rx_mem_buffe
        if (unlikely(!test_bit(STATUS_SCANNING, &priv->status)) &&
            (pkt->hdr.cmd == STATISTICS_NOTIFICATION)) {
                iwl4965_rx_calc_noise(priv);
-#ifdef CONFIG_IWL4965_SENSITIVITY
+#ifdef CONFIG_IWL4965_RUN_TIME_CALIB
                queue_work(priv->workqueue, &priv->sensitivity_work);
 #endif
        }
@@ -4139,7 +3478,7 @@ static void iwl4965_rx_missed_beacon_notif(struct iwl_priv *priv,
                                           struct iwl4965_rx_mem_buffer *rxb)
 
 {
-#ifdef CONFIG_IWL4965_SENSITIVITY
+#ifdef CONFIG_IWL4965_RUN_TIME_CALIB
        struct iwl4965_rx_packet *pkt = (void *)rxb->skb->data;
        struct iwl4965_missed_beacon_notif *missed_beacon;
 
@@ -4150,11 +3489,10 @@ static void iwl4965_rx_missed_beacon_notif(struct iwl_priv *priv,
                    le32_to_cpu(missed_beacon->total_missed_becons),
                    le32_to_cpu(missed_beacon->num_recvd_beacons),
                    le32_to_cpu(missed_beacon->num_expected_beacons));
-               priv->sensitivity_data.state = IWL_SENS_CALIB_NEED_REINIT;
-               if (unlikely(!test_bit(STATUS_SCANNING, &priv->status)))
-                       queue_work(priv->workqueue, &priv->sensitivity_work);
+               if (!test_bit(STATUS_SCANNING, &priv->status))
+                       iwl_init_sensitivity(priv);
        }
-#endif /*CONFIG_IWL4965_SENSITIVITY*/
+#endif /*CONFIG_IWL4965_RUN_TIME_CALIB*/
 }
 #ifdef CONFIG_IWL4965_HT
 
@@ -4930,7 +4268,7 @@ void iwl4965_hw_rx_handler_setup(struct iwl_priv *priv)
 void iwl4965_hw_setup_deferred_work(struct iwl_priv *priv)
 {
        INIT_WORK(&priv->txpower_work, iwl4965_bg_txpower_work);
-#ifdef CONFIG_IWL4965_SENSITIVITY
+#ifdef CONFIG_IWL4965_RUN_TIME_CALIB
        INIT_WORK(&priv->sensitivity_work, iwl4965_bg_sensitivity_work);
 #endif
        init_timer(&priv->statistics_periodic);
@@ -4952,6 +4290,10 @@ static struct iwl_hcmd_ops iwl4965_hcmd = {
 
 static struct iwl_hcmd_utils_ops iwl4965_hcmd_utils = {
        .enqueue_hcmd = iwl4965_enqueue_hcmd,
+#ifdef CONFIG_IWL4965_RUN_TIME_CALIB
+       .chain_noise_reset = iwl4965_chain_noise_reset,
+       .gain_computation = iwl4965_gain_computation,
+#endif
 };
 
 static struct iwl_lib_ops iwl4965_lib = {
index 581b98556c86cff0d4f8d2f2c9c56b5b7843e03c..d728dd837e979b7e43e1faf0fc4737f238d1c79e 100644 (file)
@@ -566,6 +566,29 @@ struct iwl4965_ibss_seq {
        struct list_head list;
 };
 
+struct iwl_sensitivity_ranges {
+       u16 min_nrg_cck;
+       u16 max_nrg_cck;
+
+       u16 nrg_th_cck;
+       u16 nrg_th_ofdm;
+
+       u16 auto_corr_min_ofdm;
+       u16 auto_corr_min_ofdm_mrc;
+       u16 auto_corr_min_ofdm_x1;
+       u16 auto_corr_min_ofdm_mrc_x1;
+
+       u16 auto_corr_max_ofdm;
+       u16 auto_corr_max_ofdm_mrc;
+       u16 auto_corr_max_ofdm_x1;
+       u16 auto_corr_max_ofdm_mrc_x1;
+
+       u16 auto_corr_max_cck;
+       u16 auto_corr_max_cck_mrc;
+       u16 auto_corr_min_cck;
+       u16 auto_corr_min_cck_mrc;
+};
+
 /**
  * struct iwl_hw_params
  * @max_txq_num: Max # Tx queues supported
@@ -576,6 +599,7 @@ struct iwl4965_ibss_seq {
  * @max_rxq_log: Log-base-2 of max_rxq_size
  * @max_stations:
  * @bcast_sta_id:
+ * @struct iwl_sensitivity_ranges: range of sensitivity values
  */
 struct iwl_hw_params {
        u16 max_txq_num;
@@ -590,6 +614,9 @@ struct iwl_hw_params {
        u32 max_pkt_size;
        u8  max_stations;
        u8  bcast_sta_id;
+#ifdef CONFIG_IWLWIFI_RUN_TIME_CALIB
+       const struct iwl_sensitivity_ranges *sens;
+#endif
 };
 
 #define HT_SHORT_GI_20MHZ_ONLY          (1 << 0)
@@ -732,9 +759,6 @@ extern void iwl4965_add_station(struct iwl_priv *priv, const u8 *addr,
 extern void iwl4965_set_rxon_chain(struct iwl_priv *priv);
 extern int iwl4965_alive_notify(struct iwl_priv *priv);
 extern void iwl4965_update_rate_scaling(struct iwl_priv *priv, u8 mode);
-extern void iwl4965_chain_noise_reset(struct iwl_priv *priv);
-extern void iwl4965_init_sensitivity(struct iwl_priv *priv, u8 flags,
-                                    u8 force);
 extern void iwl4965_rf_kill_ct_config(struct iwl_priv *priv);
 extern void iwl4965_hwrate_to_tx_control(struct iwl_priv *priv,
                                         u32 rate_n_flags,
@@ -818,23 +842,8 @@ struct iwl4965_lq_mngr {
 #define MAX_FA_CCK   50
 #define MIN_FA_CCK   5
 
-#define NRG_MIN_CCK  97
-#define NRG_MAX_CCK  0
-
-#define AUTO_CORR_MIN_OFDM        85
-#define AUTO_CORR_MIN_OFDM_MRC    170
-#define AUTO_CORR_MIN_OFDM_X1     105
-#define AUTO_CORR_MIN_OFDM_MRC_X1 220
-#define AUTO_CORR_MAX_OFDM        120
-#define AUTO_CORR_MAX_OFDM_MRC    210
-#define AUTO_CORR_MAX_OFDM_X1     140
-#define AUTO_CORR_MAX_OFDM_MRC_X1 270
 #define AUTO_CORR_STEP_OFDM       1
 
-#define AUTO_CORR_MIN_CCK      (125)
-#define AUTO_CORR_MAX_CCK      (200)
-#define AUTO_CORR_MIN_CCK_MRC  200
-#define AUTO_CORR_MAX_CCK_MRC  400
 #define AUTO_CORR_STEP_CCK     3
 #define AUTO_CORR_MAX_TH_CCK   160
 
@@ -865,11 +874,6 @@ enum iwl4965_chain_noise_state {
        IWL_CHAIN_NOISE_CALIBRATED = 2,
 };
 
-enum iwl4965_sensitivity_state {
-       IWL_SENS_CALIB_ALLOWED = 0,
-       IWL_SENS_CALIB_NEED_REINIT = 1,
-};
-
 enum iwl4965_calib_enabled_state {
        IWL_CALIB_DISABLED = 0,  /* must be 0 */
        IWL_CALIB_ENABLED = 1,
@@ -884,8 +888,9 @@ struct statistics_general_data {
        u32 beacon_energy_c;
 };
 
+#ifdef CONFIG_IWLWIFI_RUN_TIME_CALIB
 /* Sensitivity calib data */
-struct iwl4965_sensitivity_data {
+struct iwl_sensitivity_data {
        u32 auto_corr_ofdm;
        u32 auto_corr_ofdm_mrc;
        u32 auto_corr_ofdm_x1;
@@ -909,12 +914,10 @@ struct iwl4965_sensitivity_data {
        s32 nrg_auto_corr_silence_diff;
        u32 num_in_cck_no_fa;
        u32 nrg_th_ofdm;
-
-       u8 state;
 };
 
 /* Chain noise (differential Rx gain) calib data */
-struct iwl4965_chain_noise_data {
+struct iwl_chain_noise_data {
        u8 state;
        u16 beacon_count;
        u32 chain_noise_a;
@@ -927,6 +930,7 @@ struct iwl4965_chain_noise_data {
        u8 delta_gain_code[NUM_RX_CHAINS];
        u8 radio_write;
 };
+#endif /* CONFIG_IWLWIFI_RUN_TIME_CALIB */
 
 #define        EEPROM_SEM_TIMEOUT 10           /* milliseconds */
 #define EEPROM_SEM_RETRY_LIMIT 1000    /* number of attempts (not time) */
@@ -1051,12 +1055,12 @@ struct iwl_priv {
        u8 assoc_station_added;
        u8 use_ant_b_for_management_frame;      /* Tx antenna selection */
        u8 valid_antenna;       /* Bit mask of antennas actually connected */
-#ifdef CONFIG_IWL4965_SENSITIVITY
-       struct iwl4965_sensitivity_data sensitivity_data;
-       struct iwl4965_chain_noise_data chain_noise_data;
        u8 start_calib;
+#ifdef CONFIG_IWLWIFI_RUN_TIME_CALIB
+       struct iwl_sensitivity_data sensitivity_data;
+       struct iwl_chain_noise_data chain_noise_data;
        __le16 sensitivity_tbl[HD_TABLE_SIZE];
-#endif /*CONFIG_IWL4965_SENSITIVITY*/
+#endif /*CONFIG_IWLWIFI_RUN_TIME_CALIB*/
 
 #ifdef CONFIG_IWL4965_HT
        struct iwl_ht_info current_ht_config;
@@ -1206,7 +1210,7 @@ struct iwl_priv {
 #endif /* CONFIG_IWLWIFI_DEBUG */
 
        struct work_struct txpower_work;
-#ifdef CONFIG_IWL4965_SENSITIVITY
+#ifdef CONFIG_IWL4965_RUN_TIME_CALIB
        struct work_struct sensitivity_work;
 #endif
        struct timer_list statistics_periodic;
diff --git a/drivers/net/wireless/iwlwifi/iwl-calib.c b/drivers/net/wireless/iwlwifi/iwl-calib.c
new file mode 100644 (file)
index 0000000..16213b0
--- /dev/null
@@ -0,0 +1,778 @@
+/******************************************************************************
+ *
+ * This file is provided under a dual BSD/GPLv2 license.  When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2008 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
+ * USA
+ *
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * Contact Information:
+ * Tomas Winkler <tomas.winkler@intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2005 - 2008 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *  * Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ *  * Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *  * Neither the name Intel Corporation nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *****************************************************************************/
+
+#include <linux/kernel.h>
+#include <net/mac80211.h>
+
+#include "iwl-4965.h"
+#include "iwl-core.h"
+#include "iwl-calib.h"
+#include "iwl-eeprom.h"
+
+/* "false alarms" are signals that our DSP tries to lock onto,
+ *   but then determines that they are either noise, or transmissions
+ *   from a distant wireless network (also "noise", really) that get
+ *   "stepped on" by stronger transmissions within our own network.
+ * This algorithm attempts to set a sensitivity level that is high
+ *   enough to receive all of our own network traffic, but not so
+ *   high that our DSP gets too busy trying to lock onto non-network
+ *   activity/noise. */
+static int iwl_sens_energy_cck(struct iwl_priv *priv,
+                                  u32 norm_fa,
+                                  u32 rx_enable_time,
+                                  struct statistics_general_data *rx_info)
+{
+       u32 max_nrg_cck = 0;
+       int i = 0;
+       u8 max_silence_rssi = 0;
+       u32 silence_ref = 0;
+       u8 silence_rssi_a = 0;
+       u8 silence_rssi_b = 0;
+       u8 silence_rssi_c = 0;
+       u32 val;
+
+       /* "false_alarms" values below are cross-multiplications to assess the
+        *   numbers of false alarms within the measured period of actual Rx
+        *   (Rx is off when we're txing), vs the min/max expected false alarms
+        *   (some should be expected if rx is sensitive enough) in a
+        *   hypothetical listening period of 200 time units (TU), 204.8 msec:
+        *
+        * MIN_FA/fixed-time < false_alarms/actual-rx-time < MAX_FA/beacon-time
+        *
+        * */
+       u32 false_alarms = norm_fa * 200 * 1024;
+       u32 max_false_alarms = MAX_FA_CCK * rx_enable_time;
+       u32 min_false_alarms = MIN_FA_CCK * rx_enable_time;
+       struct iwl_sensitivity_data *data = NULL;
+       const struct iwl_sensitivity_ranges *ranges = priv->hw_params.sens;
+
+       data = &(priv->sensitivity_data);
+
+       data->nrg_auto_corr_silence_diff = 0;
+
+       /* Find max silence rssi among all 3 receivers.
+        * This is background noise, which may include transmissions from other
+        *    networks, measured during silence before our network's beacon */
+       silence_rssi_a = (u8)((rx_info->beacon_silence_rssi_a &
+                           ALL_BAND_FILTER) >> 8);
+       silence_rssi_b = (u8)((rx_info->beacon_silence_rssi_b &
+                           ALL_BAND_FILTER) >> 8);
+       silence_rssi_c = (u8)((rx_info->beacon_silence_rssi_c &
+                           ALL_BAND_FILTER) >> 8);
+
+       val = max(silence_rssi_b, silence_rssi_c);
+       max_silence_rssi = max(silence_rssi_a, (u8) val);
+
+       /* Store silence rssi in 20-beacon history table */
+       data->nrg_silence_rssi[data->nrg_silence_idx] = max_silence_rssi;
+       data->nrg_silence_idx++;
+       if (data->nrg_silence_idx >= NRG_NUM_PREV_STAT_L)
+               data->nrg_silence_idx = 0;
+
+       /* Find max silence rssi across 20 beacon history */
+       for (i = 0; i < NRG_NUM_PREV_STAT_L; i++) {
+               val = data->nrg_silence_rssi[i];
+               silence_ref = max(silence_ref, val);
+       }
+       IWL_DEBUG_CALIB("silence a %u, b %u, c %u, 20-bcn max %u\n",
+                       silence_rssi_a, silence_rssi_b, silence_rssi_c,
+                       silence_ref);
+
+       /* Find max rx energy (min value!) among all 3 receivers,
+        *   measured during beacon frame.
+        * Save it in 10-beacon history table. */
+       i = data->nrg_energy_idx;
+       val = min(rx_info->beacon_energy_b, rx_info->beacon_energy_c);
+       data->nrg_value[i] = min(rx_info->beacon_energy_a, val);
+
+       data->nrg_energy_idx++;
+       if (data->nrg_energy_idx >= 10)
+               data->nrg_energy_idx = 0;
+
+       /* Find min rx energy (max value) across 10 beacon history.
+        * This is the minimum signal level that we want to receive well.
+        * Add backoff (margin so we don't miss slightly lower energy frames).
+        * This establishes an upper bound (min value) for energy threshold. */
+       max_nrg_cck = data->nrg_value[0];
+       for (i = 1; i < 10; i++)
+               max_nrg_cck = (u32) max(max_nrg_cck, (data->nrg_value[i]));
+       max_nrg_cck += 6;
+
+       IWL_DEBUG_CALIB("rx energy a %u, b %u, c %u, 10-bcn max/min %u\n",
+                       rx_info->beacon_energy_a, rx_info->beacon_energy_b,
+                       rx_info->beacon_energy_c, max_nrg_cck - 6);
+
+       /* Count number of consecutive beacons with fewer-than-desired
+        *   false alarms. */
+       if (false_alarms < min_false_alarms)
+               data->num_in_cck_no_fa++;
+       else
+               data->num_in_cck_no_fa = 0;
+       IWL_DEBUG_CALIB("consecutive bcns with few false alarms = %u\n",
+                       data->num_in_cck_no_fa);
+
+       /* If we got too many false alarms this time, reduce sensitivity */
+       if ((false_alarms > max_false_alarms) &&
+               (data->auto_corr_cck > AUTO_CORR_MAX_TH_CCK)) {
+               IWL_DEBUG_CALIB("norm FA %u > max FA %u\n",
+                    false_alarms, max_false_alarms);
+               IWL_DEBUG_CALIB("... reducing sensitivity\n");
+               data->nrg_curr_state = IWL_FA_TOO_MANY;
+               /* Store for "fewer than desired" on later beacon */
+               data->nrg_silence_ref = silence_ref;
+
+               /* increase energy threshold (reduce nrg value)
+                *   to decrease sensitivity */
+               if (data->nrg_th_cck >
+                       (ranges->max_nrg_cck + NRG_STEP_CCK))
+                       data->nrg_th_cck = data->nrg_th_cck
+                                                - NRG_STEP_CCK;
+               else
+                       data->nrg_th_cck = ranges->max_nrg_cck;
+       /* Else if we got fewer than desired, increase sensitivity */
+       } else if (false_alarms < min_false_alarms) {
+               data->nrg_curr_state = IWL_FA_TOO_FEW;
+
+               /* Compare silence level with silence level for most recent
+                *   healthy number or too many false alarms */
+               data->nrg_auto_corr_silence_diff = (s32)data->nrg_silence_ref -
+                                                  (s32)silence_ref;
+
+               IWL_DEBUG_CALIB("norm FA %u < min FA %u, silence diff %d\n",
+                        false_alarms, min_false_alarms,
+                        data->nrg_auto_corr_silence_diff);
+
+               /* Increase value to increase sensitivity, but only if:
+                * 1a) previous beacon did *not* have *too many* false alarms
+                * 1b) AND there's a significant difference in Rx levels
+                *      from a previous beacon with too many, or healthy # FAs
+                * OR 2) We've seen a lot of beacons (100) with too few
+                *       false alarms */
+               if ((data->nrg_prev_state != IWL_FA_TOO_MANY) &&
+                       ((data->nrg_auto_corr_silence_diff > NRG_DIFF) ||
+                       (data->num_in_cck_no_fa > MAX_NUMBER_CCK_NO_FA))) {
+
+                       IWL_DEBUG_CALIB("... increasing sensitivity\n");
+                       /* Increase nrg value to increase sensitivity */
+                       val = data->nrg_th_cck + NRG_STEP_CCK;
+                       data->nrg_th_cck = min((u32)ranges->min_nrg_cck, val);
+               } else {
+                       IWL_DEBUG_CALIB("... but not changing sensitivity\n");
+               }
+
+       /* Else we got a healthy number of false alarms, keep status quo */
+       } else {
+               IWL_DEBUG_CALIB(" FA in safe zone\n");
+               data->nrg_curr_state = IWL_FA_GOOD_RANGE;
+
+               /* Store for use in "fewer than desired" with later beacon */
+               data->nrg_silence_ref = silence_ref;
+
+               /* If previous beacon had too many false alarms,
+                *   give it some extra margin by reducing sensitivity again
+                *   (but don't go below measured energy of desired Rx) */
+               if (IWL_FA_TOO_MANY == data->nrg_prev_state) {
+                       IWL_DEBUG_CALIB("... increasing margin\n");
+                       if (data->nrg_th_cck > (max_nrg_cck + NRG_MARGIN))
+                               data->nrg_th_cck -= NRG_MARGIN;
+                       else
+                               data->nrg_th_cck = max_nrg_cck;
+               }
+       }
+
+       /* Make sure the energy threshold does not go above the measured
+        * energy of the desired Rx signals (reduced by backoff margin),
+        * or else we might start missing Rx frames.
+        * Lower value is higher energy, so we use max()!
+        */
+       data->nrg_th_cck = max(max_nrg_cck, data->nrg_th_cck);
+       IWL_DEBUG_CALIB("new nrg_th_cck %u\n", data->nrg_th_cck);
+
+       data->nrg_prev_state = data->nrg_curr_state;
+
+       /* Auto-correlation CCK algorithm */
+       if (false_alarms > min_false_alarms) {
+
+               /* increase auto_corr values to decrease sensitivity
+                * so the DSP won't be disturbed by the noise
+                */
+               if (data->auto_corr_cck < AUTO_CORR_MAX_TH_CCK)
+                       data->auto_corr_cck = AUTO_CORR_MAX_TH_CCK + 1;
+               else {
+                       val = data->auto_corr_cck + AUTO_CORR_STEP_CCK;
+                       data->auto_corr_cck =
+                               min((u32)ranges->auto_corr_max_cck, val);
+               }
+               val = data->auto_corr_cck_mrc + AUTO_CORR_STEP_CCK;
+               data->auto_corr_cck_mrc =
+                       min((u32)ranges->auto_corr_max_cck_mrc, val);
+       } else if ((false_alarms < min_false_alarms) &&
+          ((data->nrg_auto_corr_silence_diff > NRG_DIFF) ||
+          (data->num_in_cck_no_fa > MAX_NUMBER_CCK_NO_FA))) {
+
+               /* Decrease auto_corr values to increase sensitivity */
+               val = data->auto_corr_cck - AUTO_CORR_STEP_CCK;
+               data->auto_corr_cck =
+                       max((u32)ranges->auto_corr_min_cck, val);
+               val = data->auto_corr_cck_mrc - AUTO_CORR_STEP_CCK;
+               data->auto_corr_cck_mrc =
+                       max((u32)ranges->auto_corr_min_cck_mrc, val);
+       }
+
+       return 0;
+}
+
+
+static int iwl_sens_auto_corr_ofdm(struct iwl_priv *priv,
+                                      u32 norm_fa,
+                                      u32 rx_enable_time)
+{
+       u32 val;
+       u32 false_alarms = norm_fa * 200 * 1024;
+       u32 max_false_alarms = MAX_FA_OFDM * rx_enable_time;
+       u32 min_false_alarms = MIN_FA_OFDM * rx_enable_time;
+       struct iwl_sensitivity_data *data = NULL;
+       const struct iwl_sensitivity_ranges *ranges = priv->hw_params.sens;
+
+       data = &(priv->sensitivity_data);
+
+       /* If we got too many false alarms this time, reduce sensitivity */
+       if (false_alarms > max_false_alarms) {
+
+               IWL_DEBUG_CALIB("norm FA %u > max FA %u)\n",
+                            false_alarms, max_false_alarms);
+
+               val = data->auto_corr_ofdm + AUTO_CORR_STEP_OFDM;
+               data->auto_corr_ofdm =
+                       min((u32)ranges->auto_corr_max_ofdm, val);
+
+               val = data->auto_corr_ofdm_mrc + AUTO_CORR_STEP_OFDM;
+               data->auto_corr_ofdm_mrc =
+                       min((u32)ranges->auto_corr_max_ofdm_mrc, val);
+
+               val = data->auto_corr_ofdm_x1 + AUTO_CORR_STEP_OFDM;
+               data->auto_corr_ofdm_x1 =
+                       min((u32)ranges->auto_corr_max_ofdm_x1, val);
+
+               val = data->auto_corr_ofdm_mrc_x1 + AUTO_CORR_STEP_OFDM;
+               data->auto_corr_ofdm_mrc_x1 =
+                       min((u32)ranges->auto_corr_max_ofdm_mrc_x1, val);
+       }
+
+       /* Else if we got fewer than desired, increase sensitivity */
+       else if (false_alarms < min_false_alarms) {
+
+               IWL_DEBUG_CALIB("norm FA %u < min FA %u\n",
+                            false_alarms, min_false_alarms);
+
+               val = data->auto_corr_ofdm - AUTO_CORR_STEP_OFDM;
+               data->auto_corr_ofdm =
+                       max((u32)ranges->auto_corr_min_ofdm, val);
+
+               val = data->auto_corr_ofdm_mrc - AUTO_CORR_STEP_OFDM;
+               data->auto_corr_ofdm_mrc =
+                       max((u32)ranges->auto_corr_min_ofdm_mrc, val);
+
+               val = data->auto_corr_ofdm_x1 - AUTO_CORR_STEP_OFDM;
+               data->auto_corr_ofdm_x1 =
+                       max((u32)ranges->auto_corr_min_ofdm_x1, val);
+
+               val = data->auto_corr_ofdm_mrc_x1 - AUTO_CORR_STEP_OFDM;
+               data->auto_corr_ofdm_mrc_x1 =
+                       max((u32)ranges->auto_corr_min_ofdm_mrc_x1, val);
+       } else {
+               IWL_DEBUG_CALIB("min FA %u < norm FA %u < max FA %u OK\n",
+                        min_false_alarms, false_alarms, max_false_alarms);
+       }
+       return 0;
+}
+
+/* Prepare a SENSITIVITY_CMD, send to uCode if values have changed */
+static int iwl_sensitivity_write(struct iwl_priv *priv)
+{
+       int ret = 0;
+       struct iwl_sensitivity_cmd cmd ;
+       struct iwl_sensitivity_data *data = NULL;
+       struct iwl_host_cmd cmd_out = {
+               .id = SENSITIVITY_CMD,
+               .len = sizeof(struct iwl_sensitivity_cmd),
+               .meta.flags = CMD_ASYNC,
+               .data = &cmd,
+       };
+
+       data = &(priv->sensitivity_data);
+
+       memset(&cmd, 0, sizeof(cmd));
+
+       cmd.table[HD_AUTO_CORR32_X4_TH_ADD_MIN_INDEX] =
+                               cpu_to_le16((u16)data->auto_corr_ofdm);
+       cmd.table[HD_AUTO_CORR32_X4_TH_ADD_MIN_MRC_INDEX] =
+                               cpu_to_le16((u16)data->auto_corr_ofdm_mrc);
+       cmd.table[HD_AUTO_CORR32_X1_TH_ADD_MIN_INDEX] =
+                               cpu_to_le16((u16)data->auto_corr_ofdm_x1);
+       cmd.table[HD_AUTO_CORR32_X1_TH_ADD_MIN_MRC_INDEX] =
+                               cpu_to_le16((u16)data->auto_corr_ofdm_mrc_x1);
+
+       cmd.table[HD_AUTO_CORR40_X4_TH_ADD_MIN_INDEX] =
+                               cpu_to_le16((u16)data->auto_corr_cck);
+       cmd.table[HD_AUTO_CORR40_X4_TH_ADD_MIN_MRC_INDEX] =
+                               cpu_to_le16((u16)data->auto_corr_cck_mrc);
+
+       cmd.table[HD_MIN_ENERGY_CCK_DET_INDEX] =
+                               cpu_to_le16((u16)data->nrg_th_cck);
+       cmd.table[HD_MIN_ENERGY_OFDM_DET_INDEX] =
+                               cpu_to_le16((u16)data->nrg_th_ofdm);
+
+       cmd.table[HD_BARKER_CORR_TH_ADD_MIN_INDEX] =
+                               __constant_cpu_to_le16(190);
+       cmd.table[HD_BARKER_CORR_TH_ADD_MIN_MRC_INDEX] =
+                               __constant_cpu_to_le16(390);
+       cmd.table[HD_OFDM_ENERGY_TH_IN_INDEX] =
+                               __constant_cpu_to_le16(62);
+
+       IWL_DEBUG_CALIB("ofdm: ac %u mrc %u x1 %u mrc_x1 %u thresh %u\n",
+                       data->auto_corr_ofdm, data->auto_corr_ofdm_mrc,
+                       data->auto_corr_ofdm_x1, data->auto_corr_ofdm_mrc_x1,
+                       data->nrg_th_ofdm);
+
+       IWL_DEBUG_CALIB("cck: ac %u mrc %u thresh %u\n",
+                       data->auto_corr_cck, data->auto_corr_cck_mrc,
+                       data->nrg_th_cck);
+
+       /* Update uCode's "work" table, and copy it to DSP */
+       cmd.control = SENSITIVITY_CMD_CONTROL_WORK_TABLE;
+
+       /* Don't send command to uCode if nothing has changed */
+       if (!memcmp(&cmd.table[0], &(priv->sensitivity_tbl[0]),
+                   sizeof(u16)*HD_TABLE_SIZE)) {
+               IWL_DEBUG_CALIB("No change in SENSITIVITY_CMD\n");
+               return 0;
+       }
+
+       /* Copy table for comparison next time */
+       memcpy(&(priv->sensitivity_tbl[0]), &(cmd.table[0]),
+              sizeof(u16)*HD_TABLE_SIZE);
+
+       ret = iwl_send_cmd(priv, &cmd_out);
+       if (ret)
+               IWL_ERROR("SENSITIVITY_CMD failed\n");
+
+       return ret;
+}
+
+void iwl_init_sensitivity(struct iwl_priv *priv)
+{
+       int ret = 0;
+       int i;
+       struct iwl_sensitivity_data *data = NULL;
+       const struct iwl_sensitivity_ranges *ranges = priv->hw_params.sens;
+
+       IWL_DEBUG_CALIB("Start iwl_init_sensitivity\n");
+
+       /* Clear driver's sensitivity algo data */
+       data = &(priv->sensitivity_data);
+
+       if (ranges == NULL)
+               /* can happen if IWLWIFI_RUN_TIME_CALIB is selected
+                * but no IWLXXXX_RUN_TIME_CALIB for specific is selected */
+               return;
+
+       memset(data, 0, sizeof(struct iwl_sensitivity_data));
+
+       data->num_in_cck_no_fa = 0;
+       data->nrg_curr_state = IWL_FA_TOO_MANY;
+       data->nrg_prev_state = IWL_FA_TOO_MANY;
+       data->nrg_silence_ref = 0;
+       data->nrg_silence_idx = 0;
+       data->nrg_energy_idx = 0;
+
+       for (i = 0; i < 10; i++)
+               data->nrg_value[i] = 0;
+
+       for (i = 0; i < NRG_NUM_PREV_STAT_L; i++)
+               data->nrg_silence_rssi[i] = 0;
+
+       data->auto_corr_ofdm = 90;
+       data->auto_corr_ofdm_mrc = ranges->auto_corr_min_ofdm_mrc;
+       data->auto_corr_ofdm_x1  = ranges->auto_corr_min_ofdm_x1;
+       data->auto_corr_ofdm_mrc_x1 = ranges->auto_corr_min_ofdm_mrc_x1;
+       data->auto_corr_cck = AUTO_CORR_CCK_MIN_VAL_DEF;
+       data->auto_corr_cck_mrc = ranges->auto_corr_min_cck_mrc;
+       data->nrg_th_cck = ranges->nrg_th_cck;
+       data->nrg_th_ofdm = ranges->nrg_th_ofdm;
+
+       data->last_bad_plcp_cnt_ofdm = 0;
+       data->last_fa_cnt_ofdm = 0;
+       data->last_bad_plcp_cnt_cck = 0;
+       data->last_fa_cnt_cck = 0;
+
+       ret |= iwl_sensitivity_write(priv);
+       IWL_DEBUG_CALIB("<<return 0x%X\n", ret);
+}
+EXPORT_SYMBOL(iwl_init_sensitivity);
+
+void iwl_sensitivity_calibration(struct iwl_priv *priv,
+                                   struct iwl4965_notif_statistics *resp)
+{
+       u32 rx_enable_time;
+       u32 fa_cck;
+       u32 fa_ofdm;
+       u32 bad_plcp_cck;
+       u32 bad_plcp_ofdm;
+       u32 norm_fa_ofdm;
+       u32 norm_fa_cck;
+       struct iwl_sensitivity_data *data = NULL;
+       struct statistics_rx_non_phy *rx_info = &(resp->rx.general);
+       struct statistics_rx *statistics = &(resp->rx);
+       unsigned long flags;
+       struct statistics_general_data statis;
+
+       data = &(priv->sensitivity_data);
+
+       if (!iwl_is_associated(priv)) {
+               IWL_DEBUG_CALIB("<< - not associated\n");
+               return;
+       }
+
+       spin_lock_irqsave(&priv->lock, flags);
+       if (rx_info->interference_data_flag != INTERFERENCE_DATA_AVAILABLE) {
+               IWL_DEBUG_CALIB("<< invalid data.\n");
+               spin_unlock_irqrestore(&priv->lock, flags);
+               return;
+       }
+
+       /* Extract Statistics: */
+       rx_enable_time = le32_to_cpu(rx_info->channel_load);
+       fa_cck = le32_to_cpu(statistics->cck.false_alarm_cnt);
+       fa_ofdm = le32_to_cpu(statistics->ofdm.false_alarm_cnt);
+       bad_plcp_cck = le32_to_cpu(statistics->cck.plcp_err);
+       bad_plcp_ofdm = le32_to_cpu(statistics->ofdm.plcp_err);
+
+       statis.beacon_silence_rssi_a =
+                       le32_to_cpu(statistics->general.beacon_silence_rssi_a);
+       statis.beacon_silence_rssi_b =
+                       le32_to_cpu(statistics->general.beacon_silence_rssi_b);
+       statis.beacon_silence_rssi_c =
+                       le32_to_cpu(statistics->general.beacon_silence_rssi_c);
+       statis.beacon_energy_a =
+                       le32_to_cpu(statistics->general.beacon_energy_a);
+       statis.beacon_energy_b =
+                       le32_to_cpu(statistics->general.beacon_energy_b);
+       statis.beacon_energy_c =
+                       le32_to_cpu(statistics->general.beacon_energy_c);
+
+       spin_unlock_irqrestore(&priv->lock, flags);
+
+       IWL_DEBUG_CALIB("rx_enable_time = %u usecs\n", rx_enable_time);
+
+       if (!rx_enable_time) {
+               IWL_DEBUG_CALIB("<< RX Enable Time == 0! \n");
+               return;
+       }
+
+       /* These statistics increase monotonically, and do not reset
+        *   at each beacon.  Calculate difference from last value, or just
+        *   use the new statistics value if it has reset or wrapped around. */
+       if (data->last_bad_plcp_cnt_cck > bad_plcp_cck)
+               data->last_bad_plcp_cnt_cck = bad_plcp_cck;
+       else {
+               bad_plcp_cck -= data->last_bad_plcp_cnt_cck;
+               data->last_bad_plcp_cnt_cck += bad_plcp_cck;
+       }
+
+       if (data->last_bad_plcp_cnt_ofdm > bad_plcp_ofdm)
+               data->last_bad_plcp_cnt_ofdm = bad_plcp_ofdm;
+       else {
+               bad_plcp_ofdm -= data->last_bad_plcp_cnt_ofdm;
+               data->last_bad_plcp_cnt_ofdm += bad_plcp_ofdm;
+       }
+
+       if (data->last_fa_cnt_ofdm > fa_ofdm)
+               data->last_fa_cnt_ofdm = fa_ofdm;
+       else {
+               fa_ofdm -= data->last_fa_cnt_ofdm;
+               data->last_fa_cnt_ofdm += fa_ofdm;
+       }
+
+       if (data->last_fa_cnt_cck > fa_cck)
+               data->last_fa_cnt_cck = fa_cck;
+       else {
+               fa_cck -= data->last_fa_cnt_cck;
+               data->last_fa_cnt_cck += fa_cck;
+       }
+
+       /* Total aborted signal locks */
+       norm_fa_ofdm = fa_ofdm + bad_plcp_ofdm;
+       norm_fa_cck = fa_cck + bad_plcp_cck;
+
+       IWL_DEBUG_CALIB("cck: fa %u badp %u  ofdm: fa %u badp %u\n", fa_cck,
+                       bad_plcp_cck, fa_ofdm, bad_plcp_ofdm);
+
+       iwl_sens_auto_corr_ofdm(priv, norm_fa_ofdm, rx_enable_time);
+       iwl_sens_energy_cck(priv, norm_fa_cck, rx_enable_time, &statis);
+       iwl_sensitivity_write(priv);
+
+       return;
+}
+EXPORT_SYMBOL(iwl_sensitivity_calibration);
+
+/*
+ * Accumulate 20 beacons of signal and noise statistics for each of
+ *   3 receivers/antennas/rx-chains, then figure out:
+ * 1)  Which antennas are connected.
+ * 2)  Differential rx gain settings to balance the 3 receivers.
+ */
+void iwl_chain_noise_calibration(struct iwl_priv *priv,
+                             struct iwl4965_notif_statistics *stat_resp)
+{
+       struct iwl_chain_noise_data *data = NULL;
+
+       u32 chain_noise_a;
+       u32 chain_noise_b;
+       u32 chain_noise_c;
+       u32 chain_sig_a;
+       u32 chain_sig_b;
+       u32 chain_sig_c;
+       u32 average_sig[NUM_RX_CHAINS] = {INITIALIZATION_VALUE};
+       u32 average_noise[NUM_RX_CHAINS] = {INITIALIZATION_VALUE};
+       u32 max_average_sig;
+       u16 max_average_sig_antenna_i;
+       u32 min_average_noise = MIN_AVERAGE_NOISE_MAX_VALUE;
+       u16 min_average_noise_antenna_i = INITIALIZATION_VALUE;
+       u16 i = 0;
+       u16 rxon_chnum = INITIALIZATION_VALUE;
+       u16 stat_chnum = INITIALIZATION_VALUE;
+       u8 rxon_band24;
+       u8 stat_band24;
+       u32 active_chains = 0;
+       u8 num_tx_chains;
+       unsigned long flags;
+       struct statistics_rx_non_phy *rx_info = &(stat_resp->rx.general);
+
+       data = &(priv->chain_noise_data);
+
+       /* Accumulate just the first 20 beacons after the first association,
+        *   then we're done forever. */
+       if (data->state != IWL_CHAIN_NOISE_ACCUMULATE) {
+               if (data->state == IWL_CHAIN_NOISE_ALIVE)
+                       IWL_DEBUG_CALIB("Wait for noise calib reset\n");
+               return;
+       }
+
+       spin_lock_irqsave(&priv->lock, flags);
+       if (rx_info->interference_data_flag != INTERFERENCE_DATA_AVAILABLE) {
+               IWL_DEBUG_CALIB(" << Interference data unavailable\n");
+               spin_unlock_irqrestore(&priv->lock, flags);
+               return;
+       }
+
+       rxon_band24 = !!(priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK);
+       rxon_chnum = le16_to_cpu(priv->staging_rxon.channel);
+       stat_band24 = !!(stat_resp->flag & STATISTICS_REPLY_FLG_BAND_24G_MSK);
+       stat_chnum = le32_to_cpu(stat_resp->flag) >> 16;
+
+       /* Make sure we accumulate data for just the associated channel
+        *   (even if scanning). */
+       if ((rxon_chnum != stat_chnum) || (rxon_band24 != stat_band24)) {
+               IWL_DEBUG_CALIB("Stats not from chan=%d, band24=%d\n",
+                               rxon_chnum, rxon_band24);
+               spin_unlock_irqrestore(&priv->lock, flags);
+               return;
+       }
+
+       /* Accumulate beacon statistics values across 20 beacons */
+       chain_noise_a = le32_to_cpu(rx_info->beacon_silence_rssi_a) &
+                               IN_BAND_FILTER;
+       chain_noise_b = le32_to_cpu(rx_info->beacon_silence_rssi_b) &
+                               IN_BAND_FILTER;
+       chain_noise_c = le32_to_cpu(rx_info->beacon_silence_rssi_c) &
+                               IN_BAND_FILTER;
+
+       chain_sig_a = le32_to_cpu(rx_info->beacon_rssi_a) & IN_BAND_FILTER;
+       chain_sig_b = le32_to_cpu(rx_info->beacon_rssi_b) & IN_BAND_FILTER;
+       chain_sig_c = le32_to_cpu(rx_info->beacon_rssi_c) & IN_BAND_FILTER;
+
+       spin_unlock_irqrestore(&priv->lock, flags);
+
+       data->beacon_count++;
+
+       data->chain_noise_a = (chain_noise_a + data->chain_noise_a);
+       data->chain_noise_b = (chain_noise_b + data->chain_noise_b);
+       data->chain_noise_c = (chain_noise_c + data->chain_noise_c);
+
+       data->chain_signal_a = (chain_sig_a + data->chain_signal_a);
+       data->chain_signal_b = (chain_sig_b + data->chain_signal_b);
+       data->chain_signal_c = (chain_sig_c + data->chain_signal_c);
+
+       IWL_DEBUG_CALIB("chan=%d, band24=%d, beacon=%d\n",
+                       rxon_chnum, rxon_band24, data->beacon_count);
+       IWL_DEBUG_CALIB("chain_sig: a %d b %d c %d\n",
+                       chain_sig_a, chain_sig_b, chain_sig_c);
+       IWL_DEBUG_CALIB("chain_noise: a %d b %d c %d\n",
+                       chain_noise_a, chain_noise_b, chain_noise_c);
+
+       /* If this is the 20th beacon, determine:
+        * 1)  Disconnected antennas (using signal strengths)
+        * 2)  Differential gain (using silence noise) to balance receivers */
+       if (data->beacon_count != CAL_NUM_OF_BEACONS)
+               return;
+
+       /* Analyze signal for disconnected antenna */
+       average_sig[0] = (data->chain_signal_a) / CAL_NUM_OF_BEACONS;
+       average_sig[1] = (data->chain_signal_b) / CAL_NUM_OF_BEACONS;
+       average_sig[2] = (data->chain_signal_c) / CAL_NUM_OF_BEACONS;
+
+       if (average_sig[0] >= average_sig[1]) {
+               max_average_sig = average_sig[0];
+               max_average_sig_antenna_i = 0;
+               active_chains = (1 << max_average_sig_antenna_i);
+       } else {
+               max_average_sig = average_sig[1];
+               max_average_sig_antenna_i = 1;
+               active_chains = (1 << max_average_sig_antenna_i);
+       }
+
+       if (average_sig[2] >= max_average_sig) {
+               max_average_sig = average_sig[2];
+               max_average_sig_antenna_i = 2;
+               active_chains = (1 << max_average_sig_antenna_i);
+       }
+
+       IWL_DEBUG_CALIB("average_sig: a %d b %d c %d\n",
+                    average_sig[0], average_sig[1], average_sig[2]);
+       IWL_DEBUG_CALIB("max_average_sig = %d, antenna %d\n",
+                    max_average_sig, max_average_sig_antenna_i);
+
+       /* Compare signal strengths for all 3 receivers. */
+       for (i = 0; i < NUM_RX_CHAINS; i++) {
+               if (i != max_average_sig_antenna_i) {
+                       s32 rssi_delta = (max_average_sig - average_sig[i]);
+
+                       /* If signal is very weak, compared with
+                        * strongest, mark it as disconnected. */
+                       if (rssi_delta > MAXIMUM_ALLOWED_PATHLOSS)
+                               data->disconn_array[i] = 1;
+                       else
+                               active_chains |= (1 << i);
+                       IWL_DEBUG_CALIB("i = %d  rssiDelta = %d  "
+                            "disconn_array[i] = %d\n",
+                            i, rssi_delta, data->disconn_array[i]);
+               }
+       }
+
+       num_tx_chains = 0;
+       for (i = 0; i < NUM_RX_CHAINS; i++) {
+               /* loops on all the bits of
+                * priv->hw_setting.valid_tx_ant */
+               u8 ant_msk = (1 << i);
+               if (!(priv->hw_params.valid_tx_ant & ant_msk))
+                       continue;
+
+               num_tx_chains++;
+               if (data->disconn_array[i] == 0)
+                       /* there is a Tx antenna connected */
+                       break;
+               if (num_tx_chains == priv->hw_params.tx_chains_num &&
+               data->disconn_array[i]) {
+                       /* This is the last TX antenna and is also
+                        * disconnected connect it anyway */
+                       data->disconn_array[i] = 0;
+                       active_chains |= ant_msk;
+                       IWL_DEBUG_CALIB("All Tx chains are disconnected W/A - "
+                               "declare %d as connected\n", i);
+                       break;
+               }
+       }
+
+       IWL_DEBUG_CALIB("active_chains (bitwise) = 0x%x\n",
+                       active_chains);
+
+       /* Save for use within RXON, TX, SCAN commands, etc. */
+       priv->valid_antenna = active_chains;
+
+       /* Analyze noise for rx balance */
+       average_noise[0] = ((data->chain_noise_a)/CAL_NUM_OF_BEACONS);
+       average_noise[1] = ((data->chain_noise_b)/CAL_NUM_OF_BEACONS);
+       average_noise[2] = ((data->chain_noise_c)/CAL_NUM_OF_BEACONS);
+
+       for (i = 0; i < NUM_RX_CHAINS; i++) {
+               if (!(data->disconn_array[i]) &&
+                  (average_noise[i] <= min_average_noise)) {
+                       /* This means that chain i is active and has
+                        * lower noise values so far: */
+                       min_average_noise = average_noise[i];
+                       min_average_noise_antenna_i = i;
+               }
+       }
+
+       IWL_DEBUG_CALIB("average_noise: a %d b %d c %d\n",
+                       average_noise[0], average_noise[1],
+                       average_noise[2]);
+
+       IWL_DEBUG_CALIB("min_average_noise = %d, antenna %d\n",
+                       min_average_noise, min_average_noise_antenna_i);
+
+       priv->cfg->ops->utils->gain_computation(priv, average_noise,
+               min_average_noise_antenna_i, min_average_noise);
+}
+EXPORT_SYMBOL(iwl_chain_noise_calibration);
+
diff --git a/drivers/net/wireless/iwlwifi/iwl-calib.h b/drivers/net/wireless/iwlwifi/iwl-calib.h
new file mode 100644 (file)
index 0000000..c3a3db3
--- /dev/null
@@ -0,0 +1,104 @@
+/******************************************************************************
+ *
+ * This file is provided under a dual BSD/GPLv2 license.  When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2008 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
+ * USA
+ *
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * Contact Information:
+ * Tomas Winkler <tomas.winkler@intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2005 - 2008 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *  * Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ *  * Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *  * Neither the name Intel Corporation nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *****************************************************************************/
+#ifndef __iwl_calib_h__
+#define __iwl_calib_h__
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/version.h>
+
+#include <net/mac80211.h>
+#include "iwl-eeprom.h"
+#include "iwl-core.h"
+#include "iwl-4965.h"
+
+#ifdef CONFIG_IWLWIFI_RUN_TIME_CALIB
+void iwl_chain_noise_calibration(struct iwl_priv *priv,
+                               struct iwl4965_notif_statistics *stat_resp);
+void iwl_sensitivity_calibration(struct iwl_priv *priv,
+                               struct iwl4965_notif_statistics *resp);
+
+void iwl_init_sensitivity(struct iwl_priv *priv);
+
+static inline void iwl_chain_noise_reset(struct iwl_priv *priv)
+{
+       if (priv->cfg->ops->utils->chain_noise_reset)
+               priv->cfg->ops->utils->chain_noise_reset(priv);
+}
+#else
+static inline void iwl_chain_noise_calibration(struct iwl_priv *priv,
+                               struct iwl4965_notif_statistics *stat_resp)
+{
+}
+static inline void iwl_sensitivity_calibration(struct iwl_priv *priv,
+                               struct iwl4965_notif_statistics *resp)
+{
+}
+static inline void iwl_init_sensitivity(struct iwl_priv *priv)
+{
+}
+static inline void iwl_chain_noise_reset(struct iwl_priv *priv)
+{
+}
+#endif
+
+#endif /* __iwl_calib_h__ */
index 7193d97630dce3b3ad068667181e34c71bc48975..dcbd411a47673db52a4dc193fed004c4e898828a 100644 (file)
@@ -87,6 +87,13 @@ struct iwl_hcmd_ops {
 };
 struct iwl_hcmd_utils_ops {
        int (*enqueue_hcmd)(struct iwl_priv *priv, struct iwl_host_cmd *cmd);
+#ifdef CONFIG_IWLWIFI_RUN_TIME_CALIB
+       void (*gain_computation)(struct iwl_priv *priv,
+                       u32 *average_noise,
+                       u16 min_average_noise_antennat_i,
+                       u32 min_average_noise);
+       void (*chain_noise_reset)(struct iwl_priv *priv);
+#endif
 };
 
 struct iwl_lib_ops {
index 883b42f7e9989dff95e085cf6afb6577eb9f7f1a..8a68ff4323dee7afa578c2a1e9d0d12f2f96a959 100644 (file)
@@ -51,6 +51,7 @@
 #include "iwl-io.h"
 #include "iwl-helpers.h"
 #include "iwl-sta.h"
+#include "iwl-calib.h"
 
 static int iwl4965_tx_queue_update_write_ptr(struct iwl_priv *priv,
                                  struct iwl4965_tx_queue *txq);
@@ -795,14 +796,6 @@ static int iwl4965_commit_rxon(struct iwl_priv *priv)
        /* station table will be cleared */
        priv->assoc_station_added = 0;
 
-#ifdef CONFIG_IWL4965_SENSITIVITY
-       priv->sensitivity_data.state = IWL_SENS_CALIB_NEED_REINIT;
-       if (!priv->error_recovering)
-               priv->start_calib = 0;
-
-       iwl4965_init_sensitivity(priv, CMD_ASYNC, 1);
-#endif /* CONFIG_IWL4965_SENSITIVITY */
-
        /* If we are currently associated and the new config requires
         * an RXON_ASSOC and the new config wants the associated mask enabled,
         * we must clear the associated from the active configuration
@@ -846,13 +839,10 @@ static int iwl4965_commit_rxon(struct iwl_priv *priv)
 
        iwlcore_clear_stations_table(priv);
 
-#ifdef CONFIG_IWL4965_SENSITIVITY
        if (!priv->error_recovering)
                priv->start_calib = 0;
 
-       priv->sensitivity_data.state = IWL_SENS_CALIB_NEED_REINIT;
-       iwl4965_init_sensitivity(priv, CMD_ASYNC, 1);
-#endif /* CONFIG_IWL4965_SENSITIVITY */
+       iwl_init_sensitivity(priv);
 
        memcpy(active_rxon, &priv->staging_rxon, sizeof(*active_rxon));
 
@@ -6040,11 +6030,9 @@ static void iwl4965_post_associate(struct iwl_priv *priv)
 
        iwl4965_sequence_reset(priv);
 
-#ifdef CONFIG_IWL4965_SENSITIVITY
        /* Enable Rx differential gain and sensitivity calibrations */
-       iwl4965_chain_noise_reset(priv);
+       iwl_chain_noise_reset(priv);
        priv->start_calib = 1;
-#endif /* CONFIG_IWL4965_SENSITIVITY */
 
        if (priv->iw_mode == IEEE80211_IF_TYPE_IBSS)
                priv->assoc_station_added = 1;