Remove the use of CONFIG_MV643XX_ETH_[012] variables on most platforms.
Instead, platform-specific code enables the ports supported by the
hardware. After this patch, these config variables are only used in
arch/ppc, so also move them from drivers/net/Kconfig to arch/ppc/Kconfig.
Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Jeff Garzik <jeff@garzik.org>
Cc: Paul Mackerras <paulus@samba.org>
#define MV64x60_IRQ_ETH_1 49
#define MV64x60_IRQ_ETH_2 50
-#ifdef CONFIG_MV643XX_ETH_0
-
static struct resource mv64x60_eth0_resources[] = {
[0] = {
.name = "eth0 irq",
.platform_data = ð0_pd,
},
};
-#endif /* CONFIG_MV643XX_ETH_0 */
-
-#ifdef CONFIG_MV643XX_ETH_1
static struct resource mv64x60_eth1_resources[] = {
[0] = {
.platform_data = ð1_pd,
},
};
-#endif /* CONFIG_MV643XX_ETH_1 */
-
-#ifdef CONFIG_MV643XX_ETH_2
static struct resource mv64x60_eth2_resources[] = {
[0] = {
.platform_data = ð2_pd,
},
};
-#endif /* CONFIG_MV643XX_ETH_2 */
static struct platform_device *mv643xx_eth_pd_devs[] __initdata = {
&mv643xx_eth_shared_device,
-#ifdef CONFIG_MV643XX_ETH_0
ð0_device,
-#endif
-#ifdef CONFIG_MV643XX_ETH_1
ð1_device,
-#endif
-#ifdef CONFIG_MV643XX_ETH_2
ð2_device,
-#endif
};
static u8 __init exchange_bit(u8 val, u8 cs)
int ret;
get_mac(mac);
-#ifdef CONFIG_MV643XX_ETH_0
eth_mac_add(eth1_mac_addr, mac, 0);
-#endif
-#ifdef CONFIG_MV643XX_ETH_1
eth_mac_add(eth1_mac_addr, mac, 1);
-#endif
-#ifdef CONFIG_MV643XX_ETH_2
eth_mac_add(eth2_mac_addr, mac, 2);
-#endif
ret = platform_add_devices(mv643xx_eth_pd_devs,
ARRAY_SIZE(mv643xx_eth_pd_devs));
#define MV64x60_IRQ_ETH_1 49
#define MV64x60_IRQ_ETH_2 50
-#ifdef CONFIG_MV643XX_ETH_0
-
static struct resource mv64x60_eth0_resources[] = {
[0] = {
.name = "eth0 irq",
.platform_data = ð0_pd,
},
};
-#endif /* CONFIG_MV643XX_ETH_0 */
-
-#ifdef CONFIG_MV643XX_ETH_1
static struct resource mv64x60_eth1_resources[] = {
[0] = {
.platform_data = ð1_pd,
},
};
-#endif /* CONFIG_MV643XX_ETH_1 */
-
-#ifdef CONFIG_MV643XX_ETH_2
static struct resource mv64x60_eth2_resources[] = {
[0] = {
.platform_data = ð2_pd,
},
};
-#endif /* CONFIG_MV643XX_ETH_2 */
static struct platform_device *mv643xx_eth_pd_devs[] __initdata = {
&mv643xx_eth_shared_device,
-#ifdef CONFIG_MV643XX_ETH_0
ð0_device,
-#endif
-#ifdef CONFIG_MV643XX_ETH_1
ð1_device,
-#endif
-#ifdef CONFIG_MV643XX_ETH_2
ð2_device,
-#endif
};
static u8 __init exchange_bit(u8 val, u8 cs)
int ret;
get_mac(mac);
-#ifdef CONFIG_MV643XX_ETH_0
eth_mac_add(eth1_mac_addr, mac, 0);
-#endif
-#ifdef CONFIG_MV643XX_ETH_1
eth_mac_add(eth1_mac_addr, mac, 1);
-#endif
-#ifdef CONFIG_MV643XX_ETH_2
eth_mac_add(eth2_mac_addr, mac, 2);
-#endif
ret = platform_add_devices(mv643xx_eth_pd_devs,
ARRAY_SIZE(mv643xx_eth_pd_devs));
#define MV64x60_IRQ_ETH_0 48
#define MV64x60_IRQ_ETH_1 49
-#ifdef CONFIG_MV643XX_ETH_0
-
static struct resource mv64x60_eth0_resources[] = {
[0] = {
.name = "eth0 irq",
.platform_data = ð0_pd,
},
};
-#endif /* CONFIG_MV643XX_ETH_0 */
-
-#ifdef CONFIG_MV643XX_ETH_1
static struct resource mv64x60_eth1_resources[] = {
[0] = {
.platform_data = ð1_pd,
},
};
-#endif /* CONFIG_MV643XX_ETH_1 */
static struct platform_device *mv643xx_eth_pd_devs[] __initdata = {
&mv643xx_eth_shared_device,
-#ifdef CONFIG_MV643XX_ETH_0
ð0_device,
-#endif
-#ifdef CONFIG_MV643XX_ETH_1
ð1_device,
-#endif
/* The third port is not wired up on the Ocelot C */
};
int ret;
get_mac(mac);
-#ifdef CONFIG_MV643XX_ETH_0
eth_mac_add(eth1_mac_addr, mac, 0);
-#endif
-#ifdef CONFIG_MV643XX_ETH_1
eth_mac_add(eth1_mac_addr, mac, 1);
-#endif
ret = platform_add_devices(mv643xx_eth_pd_devs,
ARRAY_SIZE(mv643xx_eth_pd_devs));
select PPC_INDIRECT_PCI
default y
+config MV643XX_ETH_0
+ bool
+ depends on MV643XX_ETH && (KATANA || RADSTONE_PPC7D || EV64360 || HDPU)
+ default y
+
+config MV643XX_ETH_1
+ bool
+ depends on MV643XX_ETH && (KATANA || RADSTONE_PPC7D || EV64360)
+ default y
+
+config MV643XX_ETH_2
+ bool
+ depends on MV643XX_ETH && (KATANA || RADSTONE_PPC7D || EV64360)
+ default y
+
menu "Set bridge options"
depends on MV64X60
chipset which is used in the Momenco Ocelot C and Jaguar ATX and
Pegasos II, amongst other PPC and MIPS boards.
-config MV643XX_ETH_0
- bool "MV-643XX Port 0"
- depends on MV643XX_ETH
- help
- This enables support for Port 0 of the Marvell MV643XX Gigabit
- Ethernet.
-
-config MV643XX_ETH_1
- bool "MV-643XX Port 1"
- depends on MV643XX_ETH
- help
- This enables support for Port 1 of the Marvell MV643XX Gigabit
- Ethernet.
-
-config MV643XX_ETH_2
- bool "MV-643XX Port 2"
- depends on MV643XX_ETH
- help
- This enables support for Port 2 of the Marvell MV643XX Gigabit
- Ethernet.
-
config QLA3XXX
tristate "QLogic QLA3XXX Network Driver Support"
depends on PCI