[PATCH] USB: Pegasus: Linksys USBVPN1 support + cleanup

This patch adds a second linksys vendor-id (077b) and the product id of the
pegasus based adapter USBVPN1

http://www1.linksys.com/Products/product.asp?prid=3D543&scid=3D30

Furthermore it replaces all LINKSYS_GPIO_RESET with DEFAULT_GPIO_RESET as both
are declared like this:
#define        DEFAULT_GPIO_RESET      0x24
#define        LINKSYS_GPIO_RESET      0x24

This is misleading and confusing.
The check is now done via the VENDOR_ID in pegasus.c:
if (usb_dev_id[pegasus->dev_index].vendor == VENDOR_LINKSYS

Signed-off-by: Malte Doersam <mdoersam@arcor.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

diff --git a/drivers/usb/net/pegasus.c b/drivers/usb/net/pegasus.c
index 156a2f1cb39ae5869a67fab648038b45065fc132..5b6675684567f883a8f462edd67f0f5efd5598ce 100644 (file)
--- a/drivers/usb/net/pegasus.c
+++ b/drivers/usb/net/pegasus.c
@@ -524,6 +524,7 @@ static int enable_net_traffic(struct net_device *dev, struct usb_device *usb)
        ret = set_registers(pegasus, EthCtrl0, 3, data);
 
        if (usb_dev_id[pegasus->dev_index].vendor == VENDOR_LINKSYS ||
+           usb_dev_id[pegasus->dev_index].vendor == VENDOR_LINKSYS2 ||
            usb_dev_id[pegasus->dev_index].vendor == VENDOR_DLINK) {
                u16 auxmode;
                read_mii_word(pegasus, 0, 0x1b, &auxmode);

diff --git a/drivers/usb/net/pegasus.h b/drivers/usb/net/pegasus.h
index 9fbd59b55cb66946d7399461db319fb0dd33fb76..a54752ce1493940a68b60474e7d2989c10e2c3a4 100644 (file)
--- a/drivers/usb/net/pegasus.h
+++ b/drivers/usb/net/pegasus.h
@@ -25,7 +25,6 @@
 #define        PHY_READ                0x40
 #define        PHY_WRITE               0x20
 #define        DEFAULT_GPIO_RESET      0x24
-#define        LINKSYS_GPIO_RESET      0x24
 #define        DEFAULT_GPIO_SET        0x26
 
 #define        PEGASUS_PRESENT         0x00000001
@@ -140,6 +139,7 @@ struct usb_eth_dev {
 #define        VENDOR_KINGSTON         0x0951
 #define        VENDOR_LANEED           0x056e
 #define        VENDOR_LINKSYS          0x066b
+#define        VENDOR_LINKSYS2         0x077b
 #define        VENDOR_MELCO            0x0411
 #define        VENDOR_MICROSOFT        0x045e
 #define        VENDOR_MOBILITY         0x1342
@@ -218,15 +218,15 @@ PEGASUS_DEV( "Corega FEter USB-TX", VENDOR_COREGA, 0x0004,
 PEGASUS_DEV( "Corega FEter USB-TXS", VENDOR_COREGA, 0x000d,
                DEFAULT_GPIO_RESET | PEGASUS_II )
 PEGASUS_DEV( "D-Link DSB-650TX", VENDOR_DLINK, 0x4001,
-               LINKSYS_GPIO_RESET )
+               DEFAULT_GPIO_RESET )
 PEGASUS_DEV( "D-Link DSB-650TX", VENDOR_DLINK, 0x4002,
-               LINKSYS_GPIO_RESET )
+               DEFAULT_GPIO_RESET )
 PEGASUS_DEV( "D-Link DSB-650TX", VENDOR_DLINK, 0x4102,
-               LINKSYS_GPIO_RESET | PEGASUS_II )
+               DEFAULT_GPIO_RESET | PEGASUS_II )
 PEGASUS_DEV( "D-Link DSB-650TX", VENDOR_DLINK, 0x400b,
-               LINKSYS_GPIO_RESET | PEGASUS_II )
+               DEFAULT_GPIO_RESET | PEGASUS_II )
 PEGASUS_DEV( "D-Link DSB-650TX", VENDOR_DLINK, 0x200c,
-               LINKSYS_GPIO_RESET | PEGASUS_II )
+               DEFAULT_GPIO_RESET | PEGASUS_II )
 PEGASUS_DEV( "D-Link DSB-650TX(PNA)", VENDOR_DLINK, 0x4003,
                DEFAULT_GPIO_RESET | HAS_HOME_PNA )
 PEGASUS_DEV( "D-Link DSB-650", VENDOR_DLINK, 0xabc1,
@@ -260,17 +260,19 @@ PEGASUS_DEV( "LANEED USB Ethernet LD-USB/T", VENDOR_LANEED, 0xabc1,
 PEGASUS_DEV( "LANEED USB Ethernet LD-USB/TX", VENDOR_LANEED, 0x200c,
                DEFAULT_GPIO_RESET | PEGASUS_II )
 PEGASUS_DEV( "Linksys USB10TX", VENDOR_LINKSYS, 0x2202,
-               LINKSYS_GPIO_RESET )
+               DEFAULT_GPIO_RESET )
 PEGASUS_DEV( "Linksys USB100TX", VENDOR_LINKSYS, 0x2203,
-               LINKSYS_GPIO_RESET )
+               DEFAULT_GPIO_RESET )
 PEGASUS_DEV( "Linksys USB100TX", VENDOR_LINKSYS, 0x2204,
-               LINKSYS_GPIO_RESET | HAS_HOME_PNA )
+               DEFAULT_GPIO_RESET | HAS_HOME_PNA )
 PEGASUS_DEV( "Linksys USB10T Ethernet Adapter", VENDOR_LINKSYS, 0x2206,
-               LINKSYS_GPIO_RESET | PEGASUS_II)
+               DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV( "Linksys USBVPN1", VENDOR_LINKSYS2, 0x08b4,
+               DEFAULT_GPIO_RESET )
 PEGASUS_DEV( "Linksys USB USB100TX", VENDOR_LINKSYS, 0x400b,
-               LINKSYS_GPIO_RESET | PEGASUS_II )
+               DEFAULT_GPIO_RESET | PEGASUS_II )
 PEGASUS_DEV( "Linksys USB10TX", VENDOR_LINKSYS, 0x200c,
-               LINKSYS_GPIO_RESET | PEGASUS_II )       
+               DEFAULT_GPIO_RESET | PEGASUS_II )
 PEGASUS_DEV( "MELCO/BUFFALO LUA-TX", VENDOR_MELCO, 0x0001,
                DEFAULT_GPIO_RESET )
 PEGASUS_DEV( "MELCO/BUFFALO LUA-TX", VENDOR_MELCO, 0x0005,