[ALSA] hda-intel - Fix power-off hang on ASUS P5AD2

The hda-intel driver has a problem at power-off on ASUS P5AD2.
It's caused when the position-buffer is enabled -- most likely a
hardware-specific problem.

This patch adds a quirk to avoid the unnecessary enablement of
position-buffer.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 3d9f0bd63ba69e8d1f47fdcac89b1b1346af4e7b..9a20fb1bef4f00da66174b01cc9dafec9f9f7b90 100644 (file)
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -1059,9 +1059,12 @@ static int azx_setup_controller(struct azx *chip, struct azx_dev *azx_dev)
        azx_sd_writel(azx_dev, SD_BDLPU, upper_32bit(azx_dev->bdl.addr));
 
        /* enable the position buffer */
-       if (!(azx_readl(chip, DPLBASE) & ICH6_DPLBASE_ENABLE))
-               azx_writel(chip, DPLBASE,
-                          (u32)chip->posbuf.addr |ICH6_DPLBASE_ENABLE);
+       if (chip->position_fix == POS_FIX_POSBUF ||
+           chip->position_fix == POS_FIX_AUTO) {
+               if (!(azx_readl(chip, DPLBASE) & ICH6_DPLBASE_ENABLE))
+                       azx_writel(chip, DPLBASE,
+                               (u32)chip->posbuf.addr | ICH6_DPLBASE_ENABLE);
+       }
 
        /* set the interrupt enable bits in the descriptor control register */
        azx_sd_writel(azx_dev, SD_CTL,
@@ -1707,6 +1710,7 @@ static int azx_dev_free(struct snd_device *device)
 static struct snd_pci_quirk position_fix_list[] __devinitdata = {
        SND_PCI_QUIRK(0x1028, 0x01cc, "Dell D820", POS_FIX_NONE),
        SND_PCI_QUIRK(0x1028, 0x01de, "Dell Precision 390", POS_FIX_NONE),
+       SND_PCI_QUIRK(0x1043, 0x813d, "ASUS P5AD2", POS_FIX_NONE),
        {}
 };