[SPARC]: Add sun4m LED driver.

This is a forward port of a 2.4.x sun4m LED driver written by Lars
Kotthoff.

Signed-off-by: Lars Kotthoff <metalhead@metalhead.ws>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 6537445dac0e8e30b519505d3639dfec42995e60..3cfb8be3ff6d0f9fe5be0c600a9f035787f767d4 100644 (file)
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -201,6 +201,14 @@ config SUN_OPENPROMFS
          Only choose N if you know in advance that you will not need to modify
          OpenPROM settings on the running system.
 
+config SPARC_LED
+       tristate "Sun4m LED driver"
+       help
+         This driver toggles the front-panel LED on sun4m systems
+         in a user-specifyable manner.  It's state can be probed
+         by reading /proc/led and it's blinking mode can be changed
+         via writes to /proc/led
+
 source "fs/Kconfig.binfmt"
 
 config SUNOS_EMUL

diff --git a/arch/sparc/kernel/Makefile b/arch/sparc/kernel/Makefile
index 3d22ba2af01cf5ac1c02103f9bd8593b25672302..1b83e21841b58adac62ed9f424068f886c5a2345 100644 (file)
--- a/arch/sparc/kernel/Makefile
+++ b/arch/sparc/kernel/Makefile
@@ -21,6 +21,7 @@ obj-$(CONFIG_SUN_AUXIO) += auxio.o
 obj-$(CONFIG_PCI) += ebus.o
 obj-$(CONFIG_SUN_PM) += apc.o pmc.o
 obj-$(CONFIG_MODULES) += module.o sparc_ksyms.o
+obj-$(CONFIG_SPARC_LED) += led.o
 
 ifdef CONFIG_SUNOS_EMUL
 obj-y += sys_sunos.o sunos_ioctl.o

diff --git a/arch/sparc/kernel/led.c b/arch/sparc/kernel/led.c
new file mode 100644 (file)
index 0000000..2a3afca
--- /dev/null
+++ b/arch/sparc/kernel/led.c
@@ -0,0 +1,139 @@
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/proc_fs.h>
+#include <linux/string.h>
+
+#include <asm/auxio.h>
+
+#define LED_MAX_LENGTH 8 /* maximum chars written to proc file */
+
+static inline void led_toggle(void)
+{
+       unsigned char val = get_auxio();
+       unsigned char on, off;
+
+       if (val & AUXIO_LED) {
+               on = 0;
+               off = AUXIO_LED;
+       } else {
+               on = AUXIO_LED;
+               off = 0;
+       }
+
+       set_auxio(on, off);
+}
+
+static struct timer_list led_blink_timer;
+
+static void led_blink(unsigned long timeout)
+{
+       led_toggle();
+
+       /* reschedule */
+       if (!timeout) { /* blink according to load */
+               led_blink_timer.expires = jiffies +
+                       ((1 + (avenrun[0] >> FSHIFT)) * HZ);
+               led_blink_timer.data = 0;
+       } else { /* blink at user specified interval */
+               led_blink_timer.expires = jiffies + (timeout * HZ);
+               led_blink_timer.data = timeout;
+       }
+       add_timer(&led_blink_timer);
+}
+
+static int led_read_proc(char *buf, char **start, off_t offset, int count,
+                        int *eof, void *data)
+{
+       int len = 0;
+
+       if (get_auxio() & AUXIO_LED)
+               len = sprintf(buf, "on\n");
+       else
+               len = sprintf(buf, "off\n");
+
+       return len;
+}
+
+static int led_write_proc(struct file *file, const char *buffer,
+                         unsigned long count, void *data)
+{
+       char *buf = NULL;
+
+       if (count > LED_MAX_LENGTH)
+               count = LED_MAX_LENGTH;
+
+       buf = kmalloc(sizeof(char) * (count + 1), GFP_KERNEL);
+       if (!buf)
+               return -ENOMEM;
+
+       if (copy_from_user(buf, buffer, count)) {
+               kfree(buf);
+               return -EFAULT;
+       }
+
+       buf[count] = '\0';
+
+       /* work around \n when echo'ing into proc */
+       if (buf[count - 1] == '\n')
+               buf[count - 1] = '\0';
+
+       /* before we change anything we want to stop any running timers,
+        * otherwise calls such as on will have no persistent effect
+        */
+       del_timer_sync(&led_blink_timer);
+
+       if (!strcmp(buf, "on")) {
+               auxio_set_led(AUXIO_LED_ON);
+       } else if (!strcmp(buf, "toggle")) {
+               led_toggle();
+       } else if ((*buf > '0') && (*buf <= '9')) {
+               led_blink(simple_strtoul(buf, NULL, 10));
+       } else if (!strcmp(buf, "load")) {
+               led_blink(0);
+       } else {
+               auxio_set_led(AUXIO_LED_OFF);
+       }
+
+       kfree(buf);
+
+       return count;
+}
+
+static struct proc_dir_entry *led;
+
+#define LED_VERSION    "0.1"
+
+static int __init led_init(void)
+{
+       init_timer(&led_blink_timer);
+       led_blink_timer.function = led_blink;
+
+       led = create_proc_entry("led", 0, NULL);
+       if (!led)
+               return -ENOMEM;
+
+       led->read_proc = led_read_proc; /* reader function */
+       led->write_proc = led_write_proc; /* writer function */
+       led->owner = THIS_MODULE;
+
+       printk(KERN_INFO
+              "led: version %s, Lars Kotthoff <metalhead@metalhead.ws>\n",
+              LED_VERSION);
+
+       return 0;
+}
+
+static void __exit led_exit(void)
+{
+       remove_proc_entry("led", NULL);
+       del_timer_sync(&led_blink_timer);
+}
+
+module_init(led_init);
+module_exit(led_exit);
+
+MODULE_AUTHOR("Lars Kotthoff <metalhead@metalhead.ws>");
+MODULE_DESCRIPTION("Provides control of the front LED on SPARC systems.");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(LED_VERSION);