[PATCH] aec62xxx: remove all dead (#if0'd) code

Signed-off-by: Thibaut VARENE <varenet@parisc-linux.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

diff --git a/drivers/ide/pci/aec62xx.c b/drivers/ide/pci/aec62xx.c
index 52cadc005d728bb3dd2af6cf443044376475f21e..a21b1e11eef4e5fe0ca849847695b049106fd943 100644 (file)
--- a/drivers/ide/pci/aec62xx.c
+++ b/drivers/ide/pci/aec62xx.c
@@ -65,23 +65,6 @@ static struct chipset_bus_clock_list_entry aec6xxx_34_base [] = {
 #define BUSCLOCK(D)    \
        ((struct chipset_bus_clock_list_entry *) pci_get_drvdata((D)))
 
-#if 0
-               if (dev->device == PCI_DEVICE_ID_ARTOP_ATP850UF) {
-                       (void) pci_read_config_byte(dev, 0x54, &art);
-                       p += sprintf(p, "DMA Mode:       %s(%s)",
-                               (c0&0x20)?((art&0x03)?"UDMA":" DMA"):" PIO",
-                               (art&0x02)?"2":(art&0x01)?"1":"0");
-                       p += sprintf(p, "          %s(%s)",
-                               (c0&0x40)?((art&0x0c)?"UDMA":" DMA"):" PIO",
-                               (art&0x08)?"2":(art&0x04)?"1":"0");
-                       p += sprintf(p, "         %s(%s)",
-                               (c1&0x20)?((art&0x30)?"UDMA":" DMA"):" PIO",
-                               (art&0x20)?"2":(art&0x10)?"1":"0");
-                       p += sprintf(p, "           %s(%s)\n",
-                               (c1&0x40)?((art&0xc0)?"UDMA":" DMA"):" PIO",
-                               (art&0x80)?"2":(art&0x40)?"1":"0");
-               } else {
-#endif
 
 /*
  * TO DO: active tuning and correction of cards without a bios.
@@ -112,13 +95,9 @@ static u8 aec62xx_ratemask (ide_drive_t *drive)
        switch(hwif->pci_dev->device) {
                case PCI_DEVICE_ID_ARTOP_ATP865:
                case PCI_DEVICE_ID_ARTOP_ATP865R:
-#if 0
-                       mode = (hwif->INB(hwif->dma_master) & 0x10) ? 4 : 3;
-#else
                        mode = (hwif->INB(((hwif->channel) ?
                                        hwif->mate->dma_status :
                                        hwif->dma_status)) & 0x10) ? 4 : 3;
-#endif
                        break;
                case PCI_DEVICE_ID_ARTOP_ATP860:
                case PCI_DEVICE_ID_ARTOP_ATP860R:
@@ -263,35 +242,9 @@ static int aec62xx_irq_timeout (ide_drive_t *drive)
                case PCI_DEVICE_ID_ARTOP_ATP865:
                case PCI_DEVICE_ID_ARTOP_ATP865R:
                        printk(" AEC62XX time out ");
-#if 0
-                       {
-                               int i = 0;
-                               u8 reg49h = 0;
-                               pci_read_config_byte(HWIF(drive)->pci_dev, 0x49, &reg49h);
-                               for (i=0;i<256;i++)
-                                       pci_write_config_byte(HWIF(drive)->pci_dev, 0x49, reg49h|0x10);
-                               pci_write_config_byte(HWIF(drive)->pci_dev, 0x49, reg49h & ~0x10);
-                       }
-                       return 0;
-#endif
                default:
                        break;
        }
-#if 0
-       {
-               ide_hwif_t *hwif        = HWIF(drive);
-               struct pci_dev *dev     = hwif->pci_dev;
-               u8 tmp1 = 0, tmp2 = 0, mode6 = 0;
-
-               pci_read_config_byte(dev, 0x44, &tmp1);
-               pci_read_config_byte(dev, 0x45, &tmp2);
-               printk(" AEC6280 r44=%x r45=%x ",tmp1,tmp2);
-               mode6 = HWIF(drive)->INB(((hwif->channel) ?
-                                          hwif->mate->dma_status :
-                                          hwif->dma_status));
-               printk(" AEC6280 133=%x ", (mode6 & 0x10));
-       }
-#endif
        return 0;
 }