The serial UML OS-abstraction layer patch (um/kernel dir).
This moves all systemcalls from trap_user.c file under os-Linux dir
Signed-off-by: Gennady Sharapov <Gennady.V.Sharapov@intel.com>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-/*
+/*
* Copyright (C) 2000, 2001, 2002 Jeff Dike (jdike@karaya.com)
* Licensed under the GPL
*/
#include "sysdep/ptrace.h"
#include "sysdep/faultinfo.h"
+typedef void (*kern_hndl)(int, union uml_pt_regs *);
+
+struct kern_handlers {
+ kern_hndl relay_signal;
+ kern_hndl winch;
+ kern_hndl bus_handler;
+ kern_hndl page_fault;
+ kern_hndl sigio_handler;
+ kern_hndl timer_handler;
+};
+
+extern struct kern_handlers handlinfo_kern;
+
extern int ncpus;
extern char *linux_prog;
extern char *gdb_init;
extern void free_irq(unsigned int, void *);
extern int um_in_interrupt(void);
extern int cpu(void);
+extern void segv_handler(int sig, union uml_pt_regs *regs);
+extern void sigio_handler(int sig, union uml_pt_regs *regs);
#endif
#include "uml-config.h"
#include "asm/types.h"
#include "../os/include/file.h"
+#include "sysdep/ptrace.h"
+#include "kern_util.h"
#define OS_TYPE_FILE 1
#define OS_TYPE_DIR 2
extern int get_signals(void);
extern int set_signals(int enable);
+/* trap.c */
+extern void os_fill_handlinfo(struct kern_handlers h);
+extern void do_longjmp(void *p, int val);
+
#endif
-/*
+/*
* Copyright (C) 2000, 2001, 2002 Jeff Dike (jdike@karaya.com)
* Licensed under the GPL
*/
extern struct cpu_task cpu_tasks[];
-struct signal_info {
- void (*handler)(int, union uml_pt_regs *);
- int is_irq;
-};
-
-extern struct signal_info sig_info[];
+extern void (*sig_info[])(int, union uml_pt_regs *);
extern unsigned long low_physmem;
extern unsigned long high_physmem;
extern void setup_hostinfo(void);
extern void do_exec(int old_pid, int new_pid);
extern void tracer_panic(char *msg, ...);
-extern void do_longjmp(void *p, int val);
extern int detach(int pid, int sig);
extern int attach(int pid);
extern void kill_child_dead(int pid);
#
obj-y := clone.o exec_kern.o mem.o mem_user.o mmu.o process.o process_kern.o \
- syscall.o tlb.o trap_user.o uaccess.o
+ syscall.o tlb.o uaccess.o
USER_OBJS := process.o clone.o
-/*
+/*
* Copyright (C) 2000, 2001 Jeff Dike (jdike@karaya.com)
* Licensed under the GPL
*/
#ifdef CONFIG_MODE_SKAS
#include "skas.h"
#endif
+#include "os.h"
/* Note this is constrained to return 0, -EFAULT, -EACCESS, -ENOMEM by segv(). */
int handle_page_fault(unsigned long address, unsigned long ip,
goto out;
}
+struct kern_handlers handlinfo_kern = {
+ .relay_signal = relay_signal,
+ .winch = winch,
+ .bus_handler = relay_signal,
+ .page_fault = segv_handler,
+ .sigio_handler = sigio_handler,
+ .timer_handler = timer_handler
+};
/*
* We give a *copy* of the faultinfo in the regs to segv.
* This must be done, since nesting SEGVs could overwrite
-/*
+/*
* Copyright (C) 2000, 2001, 2002 Jeff Dike (jdike@karaya.com)
* Licensed under the GPL
*/
#include "user_util.h"
#include "os.h"
-void kill_child_dead(int pid)
-{
- kill(pid, SIGKILL);
- kill(pid, SIGCONT);
- do {
- int n;
- CATCH_EINTR(n = waitpid(pid, NULL, 0));
- if (n > 0)
- kill(pid, SIGCONT);
- else
- break;
- } while(1);
-}
-
void segv_handler(int sig, union uml_pt_regs *regs)
{
struct faultinfo * fi = UPT_FAULTINFO(regs);
CHOOSE_MODE(syscall_handler_tt(sig, regs), (void) 0);
}
-struct signal_info sig_info[] = {
- [ SIGTRAP ] { .handler = relay_signal,
- .is_irq = 0 },
- [ SIGFPE ] { .handler = relay_signal,
- .is_irq = 0 },
- [ SIGILL ] { .handler = relay_signal,
- .is_irq = 0 },
- [ SIGWINCH ] { .handler = winch,
- .is_irq = 1 },
- [ SIGBUS ] { .handler = bus_handler,
- .is_irq = 0 },
- [ SIGSEGV] { .handler = segv_handler,
- .is_irq = 0 },
- [ SIGIO ] { .handler = sigio_handler,
- .is_irq = 1 },
- [ SIGVTALRM ] { .handler = timer_handler,
- .is_irq = 1 },
- [ SIGALRM ] { .handler = timer_handler,
- .is_irq = 1 },
- [ SIGUSR2 ] { .handler = usr2_handler,
- .is_irq = 0 },
-};
+void (*sig_info[NSIG])(int, union uml_pt_regs *);
-void do_longjmp(void *b, int val)
+void os_fill_handlinfo(struct kern_handlers h)
{
- sigjmp_buf *buf = b;
-
- siglongjmp(*buf, val);
+ sig_info[SIGTRAP] = h.relay_signal;
+ sig_info[SIGFPE] = h.relay_signal;
+ sig_info[SIGILL] = h.relay_signal;
+ sig_info[SIGWINCH] = h.winch;
+ sig_info[SIGBUS] = h.bus_handler;
+ sig_info[SIGSEGV] = h.page_fault;
+ sig_info[SIGIO] = h.sigio_handler;
+ sig_info[SIGVTALRM] = h.timer_handler;
+ sig_info[SIGALRM] = h.timer_handler;
+ sig_info[SIGUSR2] = usr2_handler;
}
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
-/*
+/*
* Copyright (C) 2002 Jeff Dike (jdike@karaya.com)
* Licensed under the GPL
*/
{
struct sigcontext *sc = sc_ptr;
struct tt_regs save_regs, *r;
- struct signal_info *info;
int save_errno = errno, is_user;
+ void (*handler)(int, union uml_pt_regs *);
/* This is done because to allow SIGSEGV to be delivered inside a SEGV
* handler. This can happen in copy_user, and if SEGV is disabled,
if(sig != SIGUSR2)
r->syscall = -1;
- info = &sig_info[sig];
- if(!info->is_irq) unblock_signals();
+ handler = sig_info[sig];
+
+ /* unblock SIGALRM, SIGVTALRM, SIGIO if sig isn't IRQ signal */
+ if (sig != SIGIO && sig != SIGWINCH &&
+ sig != SIGVTALRM && sig != SIGALRM)
+ unblock_signals();
- (*info->handler)(sig, (union uml_pt_regs *) r);
+ handler(sig, (union uml_pt_regs *) r);
if(is_user){
interrupt_end();
-/*
+/*
* Copyright (C) 2000, 2002 Jeff Dike (jdike@karaya.com)
* Licensed under the GPL
*/
uml_start = CHOOSE_MODE_PROC(set_task_sizes_tt, set_task_sizes_skas, 0,
&host_task_size, &task_size);
+ /*
+ * Setting up handlers to 'sig_info' struct
+ */
+ os_fill_handlinfo(handlinfo_kern);
+
brk_start = (unsigned long) sbrk(0);
CHOOSE_MODE_PROC(before_mem_tt, before_mem_skas, brk_start);
/* Increase physical memory size for exec-shield users
#
obj-y = aio.o elf_aux.o file.o helper.o main.o mem.o process.o signal.o \
- start_up.o time.o tt.o tty.o uaccess.o umid.o user_syms.o drivers/ \
- sys-$(SUBARCH)/
+ start_up.o time.o trap.o tt.o tty.o uaccess.o umid.o user_syms.o \
+ drivers/ sys-$(SUBARCH)/
+
+obj-$(CONFIG_MODE_SKAS) += skas/
USER_OBJS := aio.o elf_aux.o file.o helper.o main.o mem.o process.o signal.o \
- start_up.o time.o tt.o tty.o uaccess.o umid.o
+ start_up.o time.o trap.o tt.o tty.o uaccess.o umid.o
elf_aux.o: $(ARCH_DIR)/kernel-offsets.h
CFLAGS_elf_aux.o += -I$(objtree)/arch/um
--- /dev/null
+#
+# Copyright (C) 2002 - 2004 Jeff Dike (jdike@addtoit.com)
+# Licensed under the GPL
+#
+
+obj-y := trap.o
+
+USER_OBJS := trap.o
+
+include arch/um/scripts/Makefile.rules
-/*
+/*
* Copyright (C) 2002 - 2003 Jeff Dike (jdike@addtoit.com)
* Licensed under the GPL
*/
{
struct sigcontext *sc = sc_ptr;
struct skas_regs *r;
- struct signal_info *info;
+ void (*handler)(int, union uml_pt_regs *);
int save_errno = errno;
int save_user;
}
change_sig(SIGUSR1, 1);
- info = &sig_info[sig];
- if(!info->is_irq) unblock_signals();
- (*info->handler)(sig, (union uml_pt_regs *) r);
+ handler = sig_info[sig];
+
+ /* unblock SIGALRM, SIGVTALRM, SIGIO if sig isn't IRQ signal */
+ if (sig != SIGIO && sig != SIGWINCH &&
+ sig != SIGVTALRM && sig != SIGALRM)
+ unblock_signals();
+
+ handler(sig, (union uml_pt_regs *) r);
errno = save_errno;
r->is_user = save_user;
void user_signal(int sig, union uml_pt_regs *regs, int pid)
{
- struct signal_info *info;
+ void (*handler)(int, union uml_pt_regs *);
int segv = ((sig == SIGFPE) || (sig == SIGSEGV) || (sig == SIGBUS) ||
(sig == SIGILL) || (sig == SIGTRAP));
if (segv)
get_skas_faultinfo(pid, ®s->skas.faultinfo);
- info = &sig_info[sig];
- (*info->handler)(sig, regs);
+
+ handler = sig_info[sig];
+ handler(sig, (union uml_pt_regs *) regs);
unblock_signals();
}
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
--- /dev/null
+/*
+ * Copyright (C) 2000, 2001, 2002 Jeff Dike (jdike@karaya.com)
+ * Licensed under the GPL
+ */
+
+#include <setjmp.h>
+#include <signal.h>
+#include "kern_util.h"
+#include "user_util.h"
+#include "os.h"
+
+void do_longjmp(void *b, int val)
+{
+ sigjmp_buf *buf = b;
+
+ siglongjmp(*buf, val);
+}
return(0);
}
+void kill_child_dead(int pid)
+{
+ kill(pid, SIGKILL);
+ kill(pid, SIGCONT);
+ do {
+ int n;
+ CATCH_EINTR(n = waitpid(pid, NULL, 0));
+ if (n > 0)
+ kill(pid, SIGCONT);
+ else
+ break;
+ } while(1);
+}
+
/*
*-------------------------
* only for tt mode (will be deleted in future...)