cciss: Fix pci_driver.shutdown while device is still active

Fix an Oops in the cciss driver caused by system shutdown while a filesystem
on a cciss device is still active.  The cciss_remove_one function only
properly removes the device if the device has been cleanly released by its
users, which is not the case when the pci_driver.shutdown method is called.

This patch adds a new cciss_shutdown function to better match the pattern
used by various SCSI drivers: deactivate device interrupts and flush caches.
It also alters the cciss_remove_one function to match and readds the
__devexit annotation that was removed when cciss_remove_one was serving as
the pci_driver.shutdown method.

Signed-off-by: Gerald Britton <gbritton@alum.mit.edu>
Acked-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 370dfe1c422ea8a4b3ce6c8c9ba49f8001667cd3..5acc6c44aeadd1a57908ad3d63001df665496561 100644 (file)
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -3469,13 +3469,39 @@ static int __devinit cciss_init_one(struct pci_dev *pdev,
        return -1;
 }
 
-static void cciss_remove_one(struct pci_dev *pdev)
+static void cciss_shutdown(struct pci_dev *pdev)
 {
        ctlr_info_t *tmp_ptr;
-       int i, j;
+       int i;
        char flush_buf[4];
        int return_code;
 
+       tmp_ptr = pci_get_drvdata(pdev);
+       if (tmp_ptr == NULL)
+               return;
+       i = tmp_ptr->ctlr;
+       if (hba[i] == NULL)
+               return;
+
+       /* Turn board interrupts off  and send the flush cache command */
+       /* sendcmd will turn off interrupt, and send the flush...
+        * To write all data in the battery backed cache to disks */
+       memset(flush_buf, 0, 4);
+       return_code = sendcmd(CCISS_CACHE_FLUSH, i, flush_buf, 4, 0, 0, 0, NULL,
+                             TYPE_CMD);
+       if (return_code == IO_OK) {
+               printk(KERN_INFO "Completed flushing cache on controller %d\n", i);
+       } else {
+               printk(KERN_WARNING "Error flushing cache on controller %d\n", i);
+       }
+       free_irq(hba[i]->intr[2], hba[i]);
+}
+
+static void __devexit cciss_remove_one(struct pci_dev *pdev)
+{
+       ctlr_info_t *tmp_ptr;
+       int i, j;
+
        if (pci_get_drvdata(pdev) == NULL) {
                printk(KERN_ERR "cciss: Unable to remove device \n");
                return;
@@ -3506,18 +3532,7 @@ static void cciss_remove_one(struct pci_dev *pdev)
 
        cciss_unregister_scsi(i);       /* unhook from SCSI subsystem */
 
-       /* Turn board interrupts off  and send the flush cache command */
-       /* sendcmd will turn off interrupt, and send the flush...
-        * To write all data in the battery backed cache to disks */
-       memset(flush_buf, 0, 4);
-       return_code = sendcmd(CCISS_CACHE_FLUSH, i, flush_buf, 4, 0, 0, 0, NULL,
-                             TYPE_CMD);
-       if (return_code == IO_OK) {
-               printk(KERN_INFO "Completed flushing cache on controller %d\n", i);
-       } else {
-               printk(KERN_WARNING "Error flushing cache on controller %d\n", i);
-       }
-       free_irq(hba[i]->intr[2], hba[i]);
+       cciss_shutdown(pdev);
 
 #ifdef CONFIG_PCI_MSI
        if (hba[i]->msix_vector)
@@ -3550,7 +3565,7 @@ static struct pci_driver cciss_pci_driver = {
        .probe = cciss_init_one,
        .remove = __devexit_p(cciss_remove_one),
        .id_table = cciss_pci_device_id,        /* id_table */
-       .shutdown = cciss_remove_one,
+       .shutdown = cciss_shutdown,
 };
 
 /*