int i;
for (i = 0; i < bus->sprom_size; i++)
- sprom[i] = readw(bus->mmio + SSB_SPROM_BASE + (i * 2));
+ sprom[i] = ioread16(bus->mmio + SSB_SPROM_BASE + (i * 2));
}
static int sprom_do_write(struct ssb_bus *bus, const u16 *sprom)
return err;
}
+static s8 r123_extract_antgain(u8 sprom_revision, const u16 *in,
+ u16 mask, u16 shift)
+{
+ u16 v;
+ u8 gain;
+
+ v = in[SPOFF(SSB_SPROM1_AGAIN)];
+ gain = (v & mask) >> shift;
+ if (gain == 0xFF)
+ gain = 2; /* If unset use 2dBm */
+ if (sprom_revision == 1) {
+ /* Convert to Q5.2 */
+ gain <<= 2;
+ } else {
+ /* Q5.2 Fractional part is stored in 0xC0 */
+ gain = ((gain & 0xC0) >> 6) | ((gain & 0x3F) << 2);
+ }
+
+ return (s8)gain;
+}
+
static void sprom_extract_r123(struct ssb_sprom *out, const u16 *in)
{
int i;
u16 v;
+ s8 gain;
u16 loc[3];
if (out->revision == 3) { /* rev 3 moved MAC */
SPEX(et0phyaddr, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET0A, 0);
SPEX(et1phyaddr, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET1A,
SSB_SPROM1_ETHPHY_ET1A_SHIFT);
+ SPEX(et0mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET0M, 14);
+ SPEX(et1mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET1M, 15);
+ SPEX(board_rev, SSB_SPROM1_BINF, SSB_SPROM1_BINF_BREV, 0);
SPEX(country_code, SSB_SPROM1_BINF, SSB_SPROM1_BINF_CCODE,
SSB_SPROM1_BINF_CCODE_SHIFT);
+ SPEX(ant_available_a, SSB_SPROM1_BINF, SSB_SPROM1_BINF_ANTA,
+ SSB_SPROM1_BINF_ANTA_SHIFT);
+ SPEX(ant_available_bg, SSB_SPROM1_BINF, SSB_SPROM1_BINF_ANTBG,
+ SSB_SPROM1_BINF_ANTBG_SHIFT);
SPEX(pa0b0, SSB_SPROM1_PA0B0, 0xFFFF, 0);
SPEX(pa0b1, SSB_SPROM1_PA0B1, 0xFFFF, 0);
SPEX(pa0b2, SSB_SPROM1_PA0B2, 0xFFFF, 0);
SSB_SPROM1_ITSSI_A_SHIFT);
SPEX(itssi_bg, SSB_SPROM1_ITSSI, SSB_SPROM1_ITSSI_BG, 0);
SPEX(boardflags_lo, SSB_SPROM1_BFLLO, 0xFFFF, 0);
- SPEX(antenna_gain_a, SSB_SPROM1_AGAIN, SSB_SPROM1_AGAIN_A, 0);
- SPEX(antenna_gain_bg, SSB_SPROM1_AGAIN, SSB_SPROM1_AGAIN_BG,
- SSB_SPROM1_AGAIN_BG_SHIFT);
+
+ /* Extract the antenna gain values. */
+ gain = r123_extract_antgain(out->revision, in,
+ SSB_SPROM1_AGAIN_BG,
+ SSB_SPROM1_AGAIN_BG_SHIFT);
+ out->antenna_gain.ghz24.a0 = gain;
+ out->antenna_gain.ghz24.a1 = gain;
+ out->antenna_gain.ghz24.a2 = gain;
+ out->antenna_gain.ghz24.a3 = gain;
+ gain = r123_extract_antgain(out->revision, in,
+ SSB_SPROM1_AGAIN_A,
+ SSB_SPROM1_AGAIN_A_SHIFT);
+ out->antenna_gain.ghz5.a0 = gain;
+ out->antenna_gain.ghz5.a1 = gain;
+ out->antenna_gain.ghz5.a2 = gain;
+ out->antenna_gain.ghz5.a3 = gain;
}
static void sprom_extract_r4(struct ssb_sprom *out, const u16 *in)
SSB_SPROM4_ETHPHY_ET1A_SHIFT);
SPEX(country_code, SSB_SPROM4_CCODE, 0xFFFF, 0);
SPEX(boardflags_lo, SSB_SPROM4_BFLLO, 0xFFFF, 0);
- SPEX(antenna_gain_a, SSB_SPROM4_AGAIN, SSB_SPROM4_AGAIN_0, 0);
- SPEX(antenna_gain_bg, SSB_SPROM4_AGAIN, SSB_SPROM4_AGAIN_1,
- SSB_SPROM4_AGAIN_1_SHIFT);
+ SPEX(ant_available_a, SSB_SPROM4_ANTAVAIL, SSB_SPROM4_ANTAVAIL_A,
+ SSB_SPROM4_ANTAVAIL_A_SHIFT);
+ SPEX(ant_available_bg, SSB_SPROM4_ANTAVAIL, SSB_SPROM4_ANTAVAIL_BG,
+ SSB_SPROM4_ANTAVAIL_BG_SHIFT);
SPEX(maxpwr_bg, SSB_SPROM4_MAXP_BG, SSB_SPROM4_MAXP_BG_MASK, 0);
SPEX(itssi_bg, SSB_SPROM4_MAXP_BG, SSB_SPROM4_ITSSI_BG,
SSB_SPROM4_ITSSI_BG_SHIFT);
SPEX(gpio2, SSB_SPROM4_GPIOB, SSB_SPROM4_GPIOB_P2, 0);
SPEX(gpio3, SSB_SPROM4_GPIOB, SSB_SPROM4_GPIOB_P3,
SSB_SPROM4_GPIOB_P3_SHIFT);
+
+ /* Extract the antenna gain values. */
+ SPEX(antenna_gain.ghz24.a0, SSB_SPROM4_AGAIN01,
+ SSB_SPROM4_AGAIN0, SSB_SPROM4_AGAIN0_SHIFT);
+ SPEX(antenna_gain.ghz24.a1, SSB_SPROM4_AGAIN01,
+ SSB_SPROM4_AGAIN1, SSB_SPROM4_AGAIN1_SHIFT);
+ SPEX(antenna_gain.ghz24.a2, SSB_SPROM4_AGAIN23,
+ SSB_SPROM4_AGAIN2, SSB_SPROM4_AGAIN2_SHIFT);
+ SPEX(antenna_gain.ghz24.a3, SSB_SPROM4_AGAIN23,
+ SSB_SPROM4_AGAIN3, SSB_SPROM4_AGAIN3_SHIFT);
+ memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24,
+ sizeof(out->antenna_gain.ghz5));
+
/* TODO - get remaining rev 4 stuff needed */
}
memset(out, 0, sizeof(*out));
out->revision = in[size - 1] & 0x00FF;
- ssb_printk(KERN_INFO PFX "SPROM revision %d detected.\n", out->revision);
+ ssb_dprintk(KERN_DEBUG PFX "SPROM revision %d detected.\n", out->revision);
if ((bus->chip_id & 0xFF00) == 0x4400) {
/* Workaround: The BCM44XX chip has a stupid revision
* number stored in the SPROM.
err = sprom_check_crc(buf, bus->sprom_size);
if (err) {
/* check for rev 4 sprom - has special signature */
- if (buf [32] == 0x5372) {
- ssb_printk(KERN_WARNING PFX "Extracting a rev 4"
- " SPROM\n");
+ if (buf[32] == 0x5372) {
kfree(buf);
buf = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16),
GFP_KERNEL);
#define SSB_SPROM1_BINF_BREV 0x00FF /* Board Revision */
#define SSB_SPROM1_BINF_CCODE 0x0F00 /* Country Code */
#define SSB_SPROM1_BINF_CCODE_SHIFT 8
-#define SSB_SPROM1_BINF_ANTA 0x3000 /* Available A-PHY antennas */
-#define SSB_SPROM1_BINF_ANTA_SHIFT 12
-#define SSB_SPROM1_BINF_ANTBG 0xC000 /* Available B-PHY antennas */
-#define SSB_SPROM1_BINF_ANTBG_SHIFT 14
+#define SSB_SPROM1_BINF_ANTBG 0x3000 /* Available B-PHY and G-PHY antennas */
+#define SSB_SPROM1_BINF_ANTBG_SHIFT 12
+#define SSB_SPROM1_BINF_ANTA 0xC000 /* Available A-PHY antennas */
+#define SSB_SPROM1_BINF_ANTA_SHIFT 14
#define SSB_SPROM1_PA0B0 0x105E
#define SSB_SPROM1_PA0B1 0x1060
#define SSB_SPROM1_PA0B2 0x1062
#define SSB_SPROM1_ITSSI_A_SHIFT 8
#define SSB_SPROM1_BFLLO 0x1072 /* Boardflags (low 16 bits) */
#define SSB_SPROM1_AGAIN 0x1074 /* Antenna Gain (in dBm Q5.2) */
-#define SSB_SPROM1_AGAIN_A 0x00FF /* A-PHY */
-#define SSB_SPROM1_AGAIN_BG 0xFF00 /* B-PHY and G-PHY */
-#define SSB_SPROM1_AGAIN_BG_SHIFT 8
+#define SSB_SPROM1_AGAIN_BG 0x00FF /* B-PHY and G-PHY */
+#define SSB_SPROM1_AGAIN_BG_SHIFT 0
+#define SSB_SPROM1_AGAIN_A 0xFF00 /* A-PHY */
+#define SSB_SPROM1_AGAIN_A_SHIFT 8
/* SPROM Revision 2 (inherits from rev 1) */
#define SSB_SPROM2_BFLHI 0x1038 /* Boardflags (high 16 bits) */
#define SSB_SPROM3_CCKPO_11M_SHIFT 12
#define SSB_SPROM3_OFDMGPO 0x107A /* G-PHY OFDM Power Offset (4 bytes, BigEndian) */
-/* SPROM Revision 4 entries with ?? in comment are unknown */
+/* SPROM Revision 4 */
#define SSB_SPROM4_IL0MAC 0x104C /* 6 byte MAC address for a/b/g/n */
#define SSB_SPROM4_ET0MAC 0x1018 /* 6 bytes MAC address for Ethernet ?? */
#define SSB_SPROM4_ET1MAC 0x1018 /* 6 bytes MAC address for 802.11a ?? */
#define SSB_SPROM4_ETHPHY_ET0M (1<<14) /* MDIO for enet0 */
#define SSB_SPROM4_ETHPHY_ET1M (1<<15) /* MDIO for enet1 */
#define SSB_SPROM4_CCODE 0x1052 /* Country Code (2 bytes) */
-#define SSB_SPROM4_ANT_A 0x105D /* A Antennas */
-#define SSB_SPROM4_ANT_BG 0x105C /* B/G Antennas */
+#define SSB_SPROM4_ANTAVAIL 0x105D /* Antenna available bitfields */
+#define SSB_SPROM4_ANTAVAIL_A 0x00FF /* A-PHY bitfield */
+#define SSB_SPROM4_ANTAVAIL_A_SHIFT 0
+#define SSB_SPROM4_ANTAVAIL_BG 0xFF00 /* B-PHY and G-PHY bitfield */
+#define SSB_SPROM4_ANTAVAIL_BG_SHIFT 8
#define SSB_SPROM4_BFLLO 0x1044 /* Boardflags (low 16 bits) */
-#define SSB_SPROM4_AGAIN 0x105E /* Antenna Gain (in dBm Q5.2) */
-#define SSB_SPROM4_AGAIN_0 0x00FF /* Antenna 0 */
-#define SSB_SPROM4_AGAIN_1 0xFF00 /* Antenna 1 */
-#define SSB_SPROM4_AGAIN_1_SHIFT 8
+#define SSB_SPROM4_AGAIN01 0x105E /* Antenna Gain (in dBm Q5.2) */
+#define SSB_SPROM4_AGAIN0 0x00FF /* Antenna 0 */
+#define SSB_SPROM4_AGAIN0_SHIFT 0
+#define SSB_SPROM4_AGAIN1 0xFF00 /* Antenna 1 */
+#define SSB_SPROM4_AGAIN1_SHIFT 8
+#define SSB_SPROM4_AGAIN23 0x1060
+#define SSB_SPROM4_AGAIN2 0x00FF /* Antenna 2 */
+#define SSB_SPROM4_AGAIN2_SHIFT 0
+#define SSB_SPROM4_AGAIN3 0xFF00 /* Antenna 3 */
+#define SSB_SPROM4_AGAIN3_SHIFT 8
#define SSB_SPROM4_BFLHI 0x1046 /* Board Flags Hi */
#define SSB_SPROM4_MAXP_BG 0x1080 /* Max Power BG in path 1 */
#define SSB_SPROM4_MAXP_BG_MASK 0x00FF /* Mask for Max Power BG */
projects / linux-2.6 / commitdiff