EHCI: local variable for port status register

This patch (as708) introduces a local variable to hold the port
status-register address in ehci-hub.c.  There's not much improvement
in the object code, but it sure is a lot easier to read.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index df00fcbadfbc7137d02f62c4a34de067f039a4e8..12f881ff4b2302088760ec4739cdb7118b3c86c7 100644 (file)
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -193,6 +193,7 @@ static int ehci_bus_resume (struct usb_hcd *hcd)
 static int check_reset_complete (
        struct ehci_hcd *ehci,
        int             index,
+       u32 __iomem     *status_reg,
        int             port_status
 ) {
        if (!(port_status & PORT_CONNECT)) {
@@ -217,8 +218,7 @@ static int check_reset_complete (
                // what happens if HCS_N_CC(params) == 0 ?
                port_status |= PORT_OWNER;
                port_status &= ~PORT_RWC_BITS;
-               ehci_writel(ehci, port_status,
-                           &ehci->regs->port_status [index]);
+               ehci_writel(ehci, port_status, status_reg);
 
        } else
                ehci_dbg (ehci, "port %d high speed\n", index + 1);
@@ -347,6 +347,7 @@ static int ehci_hub_control (
 ) {
        struct ehci_hcd *ehci = hcd_to_ehci (hcd);
        int             ports = HCS_N_PORTS (ehci->hcs_params);
+       u32 __iomem     *status_reg = &ehci->regs->port_status[wIndex - 1];
        u32             temp, status;
        unsigned long   flags;
        int             retval = 0;
@@ -375,18 +376,17 @@ static int ehci_hub_control (
                if (!wIndex || wIndex > ports)
                        goto error;
                wIndex--;
-               temp = ehci_readl(ehci, &ehci->regs->port_status [wIndex]);
+               temp = ehci_readl(ehci, status_reg);
                if (temp & PORT_OWNER)
                        break;
 
                switch (wValue) {
                case USB_PORT_FEAT_ENABLE:
-                       ehci_writel(ehci, temp & ~PORT_PE,
-                                   &ehci->regs->port_status [wIndex]);
+                       ehci_writel(ehci, temp & ~PORT_PE, status_reg);
                        break;
                case USB_PORT_FEAT_C_ENABLE:
                        ehci_writel(ehci, (temp & ~PORT_RWC_BITS) | PORT_PEC,
-                                   &ehci->regs->port_status [wIndex]);
+                                       status_reg);
                        break;
                case USB_PORT_FEAT_SUSPEND:
                        if (temp & PORT_RESET)
@@ -399,7 +399,7 @@ static int ehci_hub_control (
                                /* resume signaling for 20 msec */
                                temp &= ~(PORT_RWC_BITS | PORT_WAKE_BITS);
                                ehci_writel(ehci, temp | PORT_RESUME,
-                                           &ehci->regs->port_status [wIndex]);
+                                               status_reg);
                                ehci->reset_done [wIndex] = jiffies
                                                + msecs_to_jiffies (20);
                        }
@@ -411,15 +411,15 @@ static int ehci_hub_control (
                        if (HCS_PPC (ehci->hcs_params))
                                ehci_writel(ehci,
                                          temp & ~(PORT_RWC_BITS | PORT_POWER),
-                                         &ehci->regs->port_status [wIndex]);
+                                         status_reg);
                        break;
                case USB_PORT_FEAT_C_CONNECTION:
                        ehci_writel(ehci, (temp & ~PORT_RWC_BITS) | PORT_CSC,
-                                   &ehci->regs->port_status [wIndex]);
+                                       status_reg);
                        break;
                case USB_PORT_FEAT_C_OVER_CURRENT:
                        ehci_writel(ehci, (temp & ~PORT_RWC_BITS) | PORT_OCC,
-                                   &ehci->regs->port_status [wIndex]);
+                                       status_reg);
                        break;
                case USB_PORT_FEAT_C_RESET:
                        /* GetPortStatus clears reset */
@@ -443,7 +443,7 @@ static int ehci_hub_control (
                        goto error;
                wIndex--;
                status = 0;
-               temp = ehci_readl(ehci, &ehci->regs->port_status [wIndex]);
+               temp = ehci_readl(ehci, status_reg);
 
                // wPortChange bits
                if (temp & PORT_CSC)
@@ -461,13 +461,11 @@ static int ehci_hub_control (
                        ehci->reset_done [wIndex] = 0;
 
                        /* stop resume signaling */
-                       temp = ehci_readl(ehci,
-                                         &ehci->regs->port_status [wIndex]);
+                       temp = ehci_readl(ehci, status_reg);
                        ehci_writel(ehci,
-                                   temp & ~(PORT_RWC_BITS | PORT_RESUME),
-                                   &ehci->regs->port_status [wIndex]);
-                       retval = handshake(ehci,
-                                          &ehci->regs->port_status [wIndex],
+                                       temp & ~(PORT_RWC_BITS | PORT_RESUME),
+                                       status_reg);
+                       retval = handshake(ehci, status_reg,
                                           PORT_RESUME, 0, 2000 /* 2msec */);
                        if (retval != 0) {
                                ehci_err (ehci, "port %d resume error %d\n",
@@ -486,12 +484,11 @@ static int ehci_hub_control (
 
                        /* force reset to complete */
                        ehci_writel(ehci, temp & ~(PORT_RWC_BITS | PORT_RESET),
-                                   &ehci->regs->port_status [wIndex]);
+                                       status_reg);
                        /* REVISIT:  some hardware needs 550+ usec to clear
                         * this bit; seems too long to spin routinely...
                         */
-                       retval = handshake(ehci,
-                                          &ehci->regs->port_status [wIndex],
+                       retval = handshake(ehci, status_reg,
                                        PORT_RESET, 0, 750);
                        if (retval != 0) {
                                ehci_err (ehci, "port %d reset error %d\n",
@@ -500,9 +497,8 @@ static int ehci_hub_control (
                        }
 
                        /* see what we found out */
-                       temp = check_reset_complete (ehci, wIndex,
-                               ehci_readl(ehci,
-                                          &ehci->regs->port_status [wIndex]));
+                       temp = check_reset_complete (ehci, wIndex, status_reg,
+                                       ehci_readl(ehci, status_reg));
                }
 
                // don't show wPortStatus if it's owned by a companion hc
@@ -547,7 +543,7 @@ static int ehci_hub_control (
                if (!wIndex || wIndex > ports)
                        goto error;
                wIndex--;
-               temp = ehci_readl(ehci, &ehci->regs->port_status [wIndex]);
+               temp = ehci_readl(ehci, status_reg);
                if (temp & PORT_OWNER)
                        break;
 
@@ -561,13 +557,12 @@ static int ehci_hub_control (
                                goto error;
                        if (device_may_wakeup(&hcd->self.root_hub->dev))
                                temp |= PORT_WAKE_BITS;
-                       ehci_writel(ehci, temp | PORT_SUSPEND,
-                                   &ehci->regs->port_status [wIndex]);
+                       ehci_writel(ehci, temp | PORT_SUSPEND, status_reg);
                        break;
                case USB_PORT_FEAT_POWER:
                        if (HCS_PPC (ehci->hcs_params))
                                ehci_writel(ehci, temp | PORT_POWER,
-                                           &ehci->regs->port_status [wIndex]);
+                                               status_reg);
                        break;
                case USB_PORT_FEAT_RESET:
                        if (temp & PORT_RESUME)
@@ -595,8 +590,7 @@ static int ehci_hub_control (
                                ehci->reset_done [wIndex] = jiffies
                                                + msecs_to_jiffies (50);
                        }
-                       ehci_writel(ehci, temp,
-                                   &ehci->regs->port_status [wIndex]);
+                       ehci_writel(ehci, temp, status_reg);
                        break;
 
                /* For downstream facing ports (these):  one hub port is put
@@ -611,8 +605,7 @@ static int ehci_hub_control (
                        ehci_quiesce(ehci);
                        ehci_halt(ehci);
                        temp |= selector << 16;
-                       ehci_writel(ehci, temp,
-                                   &ehci->regs->port_status [wIndex]);
+                       ehci_writel(ehci, temp, status_reg);
                        break;
 
                default: