ARM: OMAP: gpio object shrinkage, cleanup

More GPIO/IRQ cleanup:

  - compile-time removal of much useless code
      * mpuio support on non-OMAP1.
      * 15xx/730/24xx gpio support on 1610
      * 15xx/730/16xx gpio support on 24xx
      * etc

  - remove all BUG() calls, which are always bad news ... replaced some
    with normal fault reports for that call, others with WARN_ON(1).

  - small mpuio bugfix:  add missing set_type() method

Oh, and fix a minor merge issue: inode->u.generic_ip is now gone.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 0059f19185a74cf4da2e73d434e4ae758b4215d2..f0a882b8ab3a1ca3aeecf9cdea50fb68a8cd7397 100644 (file)
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -267,21 +267,34 @@ static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input)
        u32 l;
 
        switch (bank->method) {
+#ifdef CONFIG_ARCH_OMAP1
        case METHOD_MPUIO:
                reg += OMAP_MPUIO_IO_CNTL;
                break;
+#endif
+#ifdef CONFIG_ARCH_OMAP15XX
        case METHOD_GPIO_1510:
                reg += OMAP1510_GPIO_DIR_CONTROL;
                break;
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
        case METHOD_GPIO_1610:
                reg += OMAP1610_GPIO_DIRECTION;
                break;
+#endif
+#ifdef CONFIG_ARCH_OMAP730
        case METHOD_GPIO_730:
                reg += OMAP730_GPIO_DIR_CONTROL;
                break;
+#endif
+#ifdef CONFIG_ARCH_OMAP24XX
        case METHOD_GPIO_24XX:
                reg += OMAP24XX_GPIO_OE;
                break;
+#endif
+       default:
+               WARN_ON(1);
+               return;
        }
        l = __raw_readl(reg);
        if (is_input)
@@ -309,6 +322,7 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
        u32 l = 0;
 
        switch (bank->method) {
+#ifdef CONFIG_ARCH_OMAP1
        case METHOD_MPUIO:
                reg += OMAP_MPUIO_OUTPUT;
                l = __raw_readl(reg);
@@ -317,6 +331,8 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
                else
                        l &= ~(1 << gpio);
                break;
+#endif
+#ifdef CONFIG_ARCH_OMAP15XX
        case METHOD_GPIO_1510:
                reg += OMAP1510_GPIO_DATA_OUTPUT;
                l = __raw_readl(reg);
@@ -325,6 +341,8 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
                else
                        l &= ~(1 << gpio);
                break;
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
        case METHOD_GPIO_1610:
                if (enable)
                        reg += OMAP1610_GPIO_SET_DATAOUT;
@@ -332,6 +350,8 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
                        reg += OMAP1610_GPIO_CLEAR_DATAOUT;
                l = 1 << gpio;
                break;
+#endif
+#ifdef CONFIG_ARCH_OMAP730
        case METHOD_GPIO_730:
                reg += OMAP730_GPIO_DATA_OUTPUT;
                l = __raw_readl(reg);
@@ -340,6 +360,8 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
                else
                        l &= ~(1 << gpio);
                break;
+#endif
+#ifdef CONFIG_ARCH_OMAP24XX
        case METHOD_GPIO_24XX:
                if (enable)
                        reg += OMAP24XX_GPIO_SETDATAOUT;
@@ -347,8 +369,9 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
                        reg += OMAP24XX_GPIO_CLEARDATAOUT;
                l = 1 << gpio;
                break;
+#endif
        default:
-               BUG();
+               WARN_ON(1);
                return;
        }
        __raw_writel(l, reg);
@@ -372,28 +395,37 @@ int omap_get_gpio_datain(int gpio)
        void __iomem *reg;
 
        if (check_gpio(gpio) < 0)
-               return -1;
+               return -EINVAL;
        bank = get_gpio_bank(gpio);
        reg = bank->base;
        switch (bank->method) {
+#ifdef CONFIG_ARCH_OMAP1
        case METHOD_MPUIO:
                reg += OMAP_MPUIO_INPUT_LATCH;
                break;
+#endif
+#ifdef CONFIG_ARCH_OMAP15XX
        case METHOD_GPIO_1510:
                reg += OMAP1510_GPIO_DATA_INPUT;
                break;
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
        case METHOD_GPIO_1610:
                reg += OMAP1610_GPIO_DATAIN;
                break;
+#endif
+#ifdef CONFIG_ARCH_OMAP730
        case METHOD_GPIO_730:
                reg += OMAP730_GPIO_DATA_INPUT;
                break;
+#endif
+#ifdef CONFIG_ARCH_OMAP24XX
        case METHOD_GPIO_24XX:
                reg += OMAP24XX_GPIO_DATAIN;
                break;
+#endif
        default:
-               BUG();
-               return -1;
+               return -EINVAL;
        }
        return (__raw_readl(reg)
                        & (1 << get_gpio_index(gpio))) != 0;
@@ -443,6 +475,7 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
        u32 l = 0;
 
        switch (bank->method) {
+#ifdef CONFIG_ARCH_OMAP1
        case METHOD_MPUIO:
                reg += OMAP_MPUIO_GPIO_INT_EDGE;
                l = __raw_readl(reg);
@@ -453,6 +486,8 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
                else
                        goto bad;
                break;
+#endif
+#ifdef CONFIG_ARCH_OMAP15XX
        case METHOD_GPIO_1510:
                reg += OMAP1510_GPIO_INT_CONTROL;
                l = __raw_readl(reg);
@@ -463,6 +498,7 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
                else
                        goto bad;
                break;
+#endif
 #ifdef CONFIG_ARCH_OMAP16XX
        case METHOD_GPIO_1610:
                if (gpio & 0x08)
@@ -470,9 +506,6 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
                else
                        reg += OMAP1610_GPIO_EDGE_CTRL1;
                gpio &= 0x07;
-               /* We allow only edge triggering, i.e. two lowest bits */
-               if (trigger & (__IRQT_LOWLVL | __IRQT_HIGHLVL))
-                       BUG();
                l = __raw_readl(reg);
                l &= ~(3 << (gpio << 1));
                if (trigger & __IRQT_RISEDGE)
@@ -504,7 +537,6 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
                break;
 #endif
        default:
-               BUG();
                goto bad;
        }
        __raw_writel(l, reg);
@@ -519,7 +551,7 @@ static int gpio_irq_type(unsigned irq, unsigned type)
        unsigned gpio;
        int retval;
 
-       if (irq > IH_MPUIO_BASE)
+       if (!cpu_is_omap24xx() && irq > IH_MPUIO_BASE)
                gpio = OMAP_MPUIO(irq - IH_MPUIO_BASE);
        else
                gpio = irq - IH_GPIO_BASE;
@@ -527,9 +559,12 @@ static int gpio_irq_type(unsigned irq, unsigned type)
        if (check_gpio(gpio) < 0)
                return -EINVAL;
 
-       if (type & IRQT_PROBE)
+       if (type & ~IRQ_TYPE_SENSE_MASK)
                return -EINVAL;
-       if (!cpu_is_omap24xx() && (type & (__IRQT_LOWLVL|__IRQT_HIGHLVL)))
+
+       /* OMAP1 allows only only edge triggering */
+       if (!cpu_is_omap24xx()
+                       && (type & (IRQ_TYPE_LEVEL_LOW|IRQ_TYPE_LEVEL_HIGH)))
                return -EINVAL;
 
        bank = get_gpio_bank(gpio);
@@ -548,24 +583,34 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
        void __iomem *reg = bank->base;
 
        switch (bank->method) {
+#ifdef CONFIG_ARCH_OMAP1
        case METHOD_MPUIO:
                /* MPUIO irqstatus is reset by reading the status register,
                 * so do nothing here */
                return;
+#endif
+#ifdef CONFIG_ARCH_OMAP15XX
        case METHOD_GPIO_1510:
                reg += OMAP1510_GPIO_INT_STATUS;
                break;
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
        case METHOD_GPIO_1610:
                reg += OMAP1610_GPIO_IRQSTATUS1;
                break;
+#endif
+#ifdef CONFIG_ARCH_OMAP730
        case METHOD_GPIO_730:
                reg += OMAP730_GPIO_INT_STATUS;
                break;
+#endif
+#ifdef CONFIG_ARCH_OMAP24XX
        case METHOD_GPIO_24XX:
                reg += OMAP24XX_GPIO_IRQSTATUS1;
                break;
+#endif
        default:
-               BUG();
+               WARN_ON(1);
                return;
        }
        __raw_writel(gpio_mask, reg);
@@ -588,31 +633,41 @@ static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank)
        u32 mask;
 
        switch (bank->method) {
+#ifdef CONFIG_ARCH_OMAP1
        case METHOD_MPUIO:
                reg += OMAP_MPUIO_GPIO_MASKIT;
                mask = 0xffff;
                inv = 1;
                break;
+#endif
+#ifdef CONFIG_ARCH_OMAP15XX
        case METHOD_GPIO_1510:
                reg += OMAP1510_GPIO_INT_MASK;
                mask = 0xffff;
                inv = 1;
                break;
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
        case METHOD_GPIO_1610:
                reg += OMAP1610_GPIO_IRQENABLE1;
                mask = 0xffff;
                break;
+#endif
+#ifdef CONFIG_ARCH_OMAP730
        case METHOD_GPIO_730:
                reg += OMAP730_GPIO_INT_MASK;
                mask = 0xffffffff;
                inv = 1;
                break;
+#endif
+#ifdef CONFIG_ARCH_OMAP24XX
        case METHOD_GPIO_24XX:
                reg += OMAP24XX_GPIO_IRQENABLE1;
                mask = 0xffffffff;
                break;
+#endif
        default:
-               BUG();
+               WARN_ON(1);
                return 0;
        }
 
@@ -629,6 +684,7 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab
        u32 l;
 
        switch (bank->method) {
+#ifdef CONFIG_ARCH_OMAP1
        case METHOD_MPUIO:
                reg += OMAP_MPUIO_GPIO_MASKIT;
                l = __raw_readl(reg);
@@ -637,6 +693,8 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab
                else
                        l |= gpio_mask;
                break;
+#endif
+#ifdef CONFIG_ARCH_OMAP15XX
        case METHOD_GPIO_1510:
                reg += OMAP1510_GPIO_INT_MASK;
                l = __raw_readl(reg);
@@ -645,6 +703,8 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab
                else
                        l |= gpio_mask;
                break;
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
        case METHOD_GPIO_1610:
                if (enable)
                        reg += OMAP1610_GPIO_SET_IRQENABLE1;
@@ -652,6 +712,8 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab
                        reg += OMAP1610_GPIO_CLEAR_IRQENABLE1;
                l = gpio_mask;
                break;
+#endif
+#ifdef CONFIG_ARCH_OMAP730
        case METHOD_GPIO_730:
                reg += OMAP730_GPIO_INT_MASK;
                l = __raw_readl(reg);
@@ -660,6 +722,8 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab
                else
                        l |= gpio_mask;
                break;
+#endif
+#ifdef CONFIG_ARCH_OMAP24XX
        case METHOD_GPIO_24XX:
                if (enable)
                        reg += OMAP24XX_GPIO_SETIRQENABLE1;
@@ -667,8 +731,9 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab
                        reg += OMAP24XX_GPIO_CLEARIRQENABLE1;
                l = gpio_mask;
                break;
+#endif
        default:
-               BUG();
+               WARN_ON(1);
                return;
        }
        __raw_writel(l, reg);
@@ -837,8 +902,10 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
        desc->chip->ack(irq);
 
        bank = get_irq_data(irq);
+#ifdef CONFIG_ARCH_OMAP1
        if (bank->method == METHOD_MPUIO)
                isr_reg = bank->base + OMAP_MPUIO_GPIO_INT;
+#endif
 #ifdef CONFIG_ARCH_OMAP15XX
        if (bank->method == METHOD_GPIO_1510)
                isr_reg = bank->base + OMAP1510_GPIO_INT_STATUS;
@@ -984,6 +1051,22 @@ static void gpio_unmask_irq(unsigned int irq)
        _set_gpio_irqenable(bank, gpio_idx, 1);
 }
 
+static struct irq_chip gpio_irq_chip = {
+       .name           = "GPIO",
+       .shutdown       = gpio_irq_shutdown,
+       .ack            = gpio_ack_irq,
+       .mask           = gpio_mask_irq,
+       .unmask         = gpio_unmask_irq,
+       .set_type       = gpio_irq_type,
+       .set_wake       = gpio_wake_enable,
+};
+
+/*---------------------------------------------------------------------*/
+
+#ifdef CONFIG_ARCH_OMAP1
+
+/* MPUIO uses the always-on 32k clock */
+
 static void mpuio_ack_irq(unsigned int irq)
 {
        /* The ISR is reset automatically, so do nothing here. */
@@ -1005,23 +1088,26 @@ static void mpuio_unmask_irq(unsigned int irq)
        _set_gpio_irqenable(bank, gpio, 1);
 }
 
-static struct irq_chip gpio_irq_chip = {
-       .name           = "GPIO",
-       .shutdown       = gpio_irq_shutdown,
-       .ack            = gpio_ack_irq,
-       .mask           = gpio_mask_irq,
-       .unmask         = gpio_unmask_irq,
+static struct irq_chip mpuio_irq_chip = {
+       .name           = "MPUIO",
+       .ack            = mpuio_ack_irq,
+       .mask           = mpuio_mask_irq,
+       .unmask         = mpuio_unmask_irq,
        .set_type       = gpio_irq_type,
-       .set_wake       = gpio_wake_enable,
 };
 
-static struct irq_chip mpuio_irq_chip = {
-       .name     = "MPUIO",
-       .ack      = mpuio_ack_irq,
-       .mask     = mpuio_mask_irq,
-       .unmask   = mpuio_unmask_irq,
-       .set_type = gpio_irq_type,
-};
+
+#define bank_is_mpuio(bank)    ((bank)->method == METHOD_MPUIO)
+
+#else
+
+extern struct irq_chip mpuio_irq_chip;
+
+#define bank_is_mpuio(bank)    0
+
+#endif
+
+/*---------------------------------------------------------------------*/
 
 static int initialized;
 static struct clk * gpio_ick;
@@ -1097,9 +1183,8 @@ static int __init _omap_gpio_init(void)
                bank->reserved_map = 0;
                bank->base = IO_ADDRESS(bank->base);
                spin_lock_init(&bank->lock);
-               if (bank->method == METHOD_MPUIO) {
+               if (bank_is_mpuio(bank))
                        omap_writew(0xFFFF, OMAP_MPUIO_BASE + OMAP_MPUIO_GPIO_MASKIT);
-               }
 #ifdef CONFIG_ARCH_OMAP15XX
                if (bank->method == METHOD_GPIO_1510) {
                        __raw_writew(0xffff, bank->base + OMAP1510_GPIO_INT_MASK);
@@ -1140,7 +1225,7 @@ static int __init _omap_gpio_init(void)
 #endif
                for (j = bank->virtual_irq_start;
                     j < bank->virtual_irq_start + gpio_count; j++) {
-                       if (bank->method == METHOD_MPUIO)
+                       if (bank_is_mpuio(bank))
                                set_irq_chip(j, &mpuio_irq_chip);
                        else
                                set_irq_chip(j, &gpio_irq_chip);
@@ -1180,16 +1265,20 @@ static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg)
                void __iomem *wake_set;
 
                switch (bank->method) {
+#ifdef CONFIG_ARCH_OMAP16XX
                case METHOD_GPIO_1610:
                        wake_status = bank->base + OMAP1610_GPIO_WAKEUPENABLE;
                        wake_clear = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA;
                        wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
                        break;
+#endif
+#ifdef CONFIG_ARCH_OMAP24XX
                case METHOD_GPIO_24XX:
                        wake_status = bank->base + OMAP24XX_GPIO_SETWKUENA;
                        wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
                        wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA;
                        break;
+#endif
                default:
                        continue;
                }
@@ -1217,14 +1306,18 @@ static int omap_gpio_resume(struct sys_device *dev)
                void __iomem *wake_set;
 
                switch (bank->method) {
+#ifdef CONFIG_ARCH_OMAP16XX
                case METHOD_GPIO_1610:
                        wake_clear = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA;
                        wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
                        break;
+#endif
+#ifdef CONFIG_ARCH_OMAP24XX
                case METHOD_GPIO_24XX:
                        wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
                        wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA;
                        break;
+#endif
                default:
                        continue;
                }
@@ -1404,7 +1497,7 @@ static int dbg_gpio_show(struct seq_file *s, void *unused)
                unsigned                bankwidth = 16;
                u32                     mask = 1;
 
-               if (!cpu_is_omap24xx() && bank->method == METHOD_MPUIO)
+               if (bank_is_mpuio(bank))
                        gpio = OMAP_MPUIO(0);
                else if (cpu_is_omap24xx() || cpu_is_omap730())
                        bankwidth = 32;
@@ -1419,7 +1512,7 @@ static int dbg_gpio_show(struct seq_file *s, void *unused)
                        value = omap_get_gpio_datain(gpio);
                        is_in = gpio_is_input(bank, mask);
 
-                       if (!cpu_is_omap24xx() && bank->method == METHOD_MPUIO)
+                       if (bank_is_mpuio(bank))
                                seq_printf(s, "MPUIO %2d: ", j);
                        else
                                seq_printf(s, "GPIO %3d: ", gpio);
@@ -1460,7 +1553,7 @@ static int dbg_gpio_show(struct seq_file *s, void *unused)
                        seq_printf(s, "\n");
                }
 
-               if (!cpu_is_omap24xx() && bank->method == METHOD_MPUIO) {
+               if (bank_is_mpuio(bank)) {
                        seq_printf(s, "\n");
                        gpio = 0;
                }
@@ -1470,7 +1563,7 @@ static int dbg_gpio_show(struct seq_file *s, void *unused)
 
 static int dbg_gpio_open(struct inode *inode, struct file *file)
 {
-       return single_open(file, dbg_gpio_show, inode->u.generic_ip/*i_private*/);
+       return single_open(file, dbg_gpio_show, &inode->i_private);
 }
 
 static const struct file_operations debug_fops = {
@@ -1482,7 +1575,8 @@ static const struct file_operations debug_fops = {
 
 static int __init omap_gpio_debuginit(void)
 {
-       (void) debugfs_create_file("omap_gpio", S_IRUGO, NULL, NULL, &debug_fops);
+       (void) debugfs_create_file("omap_gpio", S_IRUGO,
+                                       NULL, NULL, &debug_fops);
        return 0;
 }
 late_initcall(omap_gpio_debuginit);