if (!wacom->tool[0]) {
/* Going into proximity select tool */
wacom->tool[1] = (data[4] & 0x20)? BTN_TOOL_RUBBER : BTN_TOOL_PEN;
- }
- else {
+ } else {
/* was entered with stylus2 pressed */
if (wacom->tool[1] == BTN_TOOL_RUBBER && !(data[4] & 0x20) ) {
/* report out proximity for previous tool */
input_report_key(dev, BTN_STYLUS, data[4] & 0x10);
/* Only allow the stylus2 button to be reported for the pen tool. */
input_report_key(dev, BTN_STYLUS2, (wacom->tool[1] == BTN_TOOL_PEN) && (data[4] & 0x20));
- }
- else {
+ } else {
/* report proximity-out of a (valid) tool */
if (wacom->tool[1] != BTN_TOOL_RUBBER) {
/* Unknown tool selected default to pen tool */
wacom->tool[0] = prox; /* Save proximity state */
input_sync(dev);
-exit:
+ exit:
retval = usb_submit_urb (urb, GFP_ATOMIC);
if (retval)
err ("%s - usb_submit_urb failed with result %d",
goto exit;
}
- if (data[0] != 2)
- {
+ if (data[0] != 2) {
printk(KERN_INFO "wacom_ptu_irq: received unknown report #%d\n", data[0]);
goto exit;
}
input_regs(dev, regs);
- if (data[1] & 0x04)
- {
+ if (data[1] & 0x04) {
input_report_key(dev, BTN_TOOL_RUBBER, data[1] & 0x20);
input_report_key(dev, BTN_TOUCH, data[1] & 0x08);
- }
- else
- {
+ } else {
input_report_key(dev, BTN_TOOL_PEN, data[1] & 0x20);
input_report_key(dev, BTN_TOUCH, data[1] & 0x01);
}
input_sync(dev);
-exit:
+ exit:
retval = usb_submit_urb (urb, GFP_ATOMIC);
if (retval)
err ("%s - usb_submit_urb failed with result %d",
input_report_key(dev, BTN_STYLUS, (data[5] & 0x40));
input_sync(dev);
-exit:
+ exit:
retval = usb_submit_urb (urb, GFP_ATOMIC);
if (retval)
err ("%s - usb_submit_urb failed with result %d",
input_regs(dev, regs);
- if ( data[1] & 0x10 ) /* in prox */
- {
+ if (data[1] & 0x10) { /* in prox */
+
switch ((data[1] >> 5) & 3) {
case 0: /* Pen */
input_report_rel(dev, REL_WHEEL, (signed char) data[6]);
/* fall through */
- case 3: /* Mouse without wheel */
+ case 3: /* Mouse without wheel */
wacom->tool[0] = BTN_TOOL_MOUSE;
input_report_key(dev, BTN_LEFT, data[1] & 0x01);
input_report_key(dev, BTN_RIGHT, data[1] & 0x02);
input_report_key(dev, wacom->tool[0], data[1] & 0x10);
input_sync(dev);
-exit:
+ exit:
retval = usb_submit_urb (urb, GFP_ATOMIC);
if (retval)
err ("%s - usb_submit_urb failed with result %d",
idx = data[1] & 0x01;
/* Enter report */
- if ((data[1] & 0xfc) == 0xc0)
- {
+ if ((data[1] & 0xfc) == 0xc0) {
/* serial number of the tool */
wacom->serial[idx] = ((data[3] & 0x0f) << 28) +
(data[4] << 20) + (data[5] << 12) +
unsigned int t;
/* general pen packet */
- if ((data[1] & 0xb8) == 0xa0)
- {
+ if ((data[1] & 0xb8) == 0xa0) {
t = (data[6] << 2) | ((data[7] >> 6) & 3);
input_report_abs(dev, ABS_PRESSURE, t);
input_report_abs(dev, ABS_TILT_X,
}
/* airbrush second packet */
- if ((data[1] & 0xbc) == 0xb4)
- {
+ if ((data[1] & 0xbc) == 0xb4) {
input_report_abs(dev, ABS_WHEEL,
(data[6] << 2) | ((data[7] >> 6) & 3));
input_report_abs(dev, ABS_TILT_X,
idx = data[1] & 0x01;
/* pad packets. Works as a second tool and is always in prox */
- if (data[0] == 12)
- {
+ if (data[0] == 12) {
/* initiate the pad as a device */
- if (wacom->tool[1] != BTN_TOOL_FINGER)
- {
+ if (wacom->tool[1] != BTN_TOOL_FINGER) {
wacom->tool[1] = BTN_TOOL_FINGER;
input_report_key(dev, wacom->tool[1], 1);
}
}
/* process in/out prox events */
- if (wacom_intuos_inout(urb)) goto exit;
+ if (wacom_intuos_inout(urb))
+ goto exit;
/* Cintiq doesn't send data when RDY bit isn't set */
- if ((wacom->features->type == CINTIQ) && !(data[1] & 0x40)) return;
+ if ((wacom->features->type == CINTIQ) && !(data[1] & 0x40))
+ return;
- if(wacom->features->type >= INTUOS3)
- {
+ if (wacom->features->type >= INTUOS3) {
input_report_abs(dev, ABS_X, (data[2] << 9) | (data[3] << 1) | ((data[9] >> 1) & 1));
input_report_abs(dev, ABS_Y, (data[4] << 9) | (data[5] << 1) | (data[9] & 1));
input_report_abs(dev, ABS_DISTANCE, ((data[9] >> 2) & 0x3f));
- }
- else
- {
+ } else {
input_report_abs(dev, ABS_X, be16_to_cpu(*(__be16 *) &data[2]));
input_report_abs(dev, ABS_Y, be16_to_cpu(*(__be16 *) &data[4]));
input_report_abs(dev, ABS_DISTANCE, ((data[9] >> 3) & 0x1f));
/* 4D mouse, 2D mouse, marker pen rotation, or Lens cursor packets */
if ((data[1] & 0xbc) == 0xa8 || (data[1] & 0xbe) == 0xb0) {
- /* Rotation packet */
- if (data[1] & 0x02)
- {
- if(wacom->features->type >= INTUOS3)
- {
+
+ if (data[1] & 0x02) {
+ /* Rotation packet */
+ if (wacom->features->type >= INTUOS3) {
/* I3 marker pen rotation reported as wheel
* due to valuator limitation
*/
t = (data[7] & 0x20) ? ((t > 900) ? ((t-1) / 2 - 1350) :
((t-1) / 2 + 450)) : (450 - t / 2) ;
input_report_abs(dev, ABS_WHEEL, t);
- }
- else
- {
+ } else {
/* 4D mouse rotation packet */
t = (data[6] << 3) | ((data[7] >> 5) & 7);
input_report_abs(dev, ABS_RZ, (data[7] & 0x20) ?
((t - 1) / 2) : -t / 2);
}
- }
- /* 4D mouse packets */
- else if ( !(data[1] & 0x10) && wacom->features->type < INTUOS3)
- {
+
+ } else if (!(data[1] & 0x10) && wacom->features->type < INTUOS3) {
+ /* 4D mouse packet */
input_report_key(dev, BTN_LEFT, data[8] & 0x01);
input_report_key(dev, BTN_MIDDLE, data[8] & 0x02);
input_report_key(dev, BTN_RIGHT, data[8] & 0x04);
input_report_key(dev, BTN_EXTRA, data[8] & 0x10);
t = (data[6] << 2) | ((data[7] >> 6) & 3);
input_report_abs(dev, ABS_THROTTLE, (data[8] & 0x08) ? -t : t);
- }
- /* 2D mouse packets */
- else if (wacom->tool[idx] == BTN_TOOL_MOUSE)
- {
+
+ } else if (wacom->tool[idx] == BTN_TOOL_MOUSE) {
+ /* 2D mouse packet */
input_report_key(dev, BTN_LEFT, data[8] & 0x04);
input_report_key(dev, BTN_MIDDLE, data[8] & 0x08);
input_report_key(dev, BTN_RIGHT, data[8] & 0x10);
input_report_rel(dev, REL_WHEEL, ((data[8] & 0x02) >> 1)
- - (data[8] & 0x01));
+ - (data[8] & 0x01));
/* I3 2D mouse side buttons */
- if (wacom->features->type == INTUOS3)
- {
+ if (wacom->features->type == INTUOS3) {
input_report_key(dev, BTN_SIDE, data[8] & 0x40);
input_report_key(dev, BTN_EXTRA, data[8] & 0x20);
}
- }
- /* Lens cursor packets */
- else if (wacom->features->type < INTUOS3)
- {
+
+ } else if (wacom->features->type < INTUOS3) {
+ /* Lens cursor packets */
input_report_key(dev, BTN_LEFT, data[8] & 0x01);
input_report_key(dev, BTN_MIDDLE, data[8] & 0x02);
input_report_key(dev, BTN_RIGHT, data[8] & 0x04);
}
static struct wacom_features wacom_features[] = {
- { "Wacom Penpartner", 7, 5040, 3780, 255, 32, PENPARTNER, wacom_penpartner_irq },
+ { "Wacom Penpartner", 7, 5040, 3780, 255, 32, PENPARTNER, wacom_penpartner_irq },
{ "Wacom Graphire", 8, 10206, 7422, 511, 32, GRAPHIRE, wacom_graphire_irq },
{ "Wacom Graphire2 4x5", 8, 10206, 7422, 511, 32, GRAPHIRE, wacom_graphire_irq },
- { "Wacom Graphire2 5x7", 8, 13918, 10206, 511, 32, GRAPHIRE, wacom_graphire_irq },
+ { "Wacom Graphire2 5x7", 8, 13918, 10206, 511, 32, GRAPHIRE, wacom_graphire_irq },
{ "Wacom Graphire3", 8, 10208, 7424, 511, 32, GRAPHIRE, wacom_graphire_irq },
{ "Wacom Graphire3 6x8", 8, 16704, 12064, 511, 32, GRAPHIRE, wacom_graphire_irq },
- { "Wacom Intuos 4x5", 10, 12700, 10600, 1023, 15, INTUOS, wacom_intuos_irq },
- { "Wacom Intuos 6x8", 10, 20320, 16240, 1023, 15, INTUOS, wacom_intuos_irq },
- { "Wacom Intuos 9x12", 10, 30480, 24060, 1023, 15, INTUOS, wacom_intuos_irq },
- { "Wacom Intuos 12x12", 10, 30480, 31680, 1023, 15, INTUOS, wacom_intuos_irq },
- { "Wacom Intuos 12x18", 10, 45720, 31680, 1023, 15, INTUOS, wacom_intuos_irq },
- { "Wacom PL400", 8, 5408, 4056, 255, 32, PL, wacom_pl_irq },
- { "Wacom PL500", 8, 6144, 4608, 255, 32, PL, wacom_pl_irq },
- { "Wacom PL600", 8, 6126, 4604, 255, 32, PL, wacom_pl_irq },
- { "Wacom PL600SX", 8, 6260, 5016, 255, 32, PL, wacom_pl_irq },
- { "Wacom PL550", 8, 6144, 4608, 511, 32, PL, wacom_pl_irq },
- { "Wacom PL800", 8, 7220, 5780, 511, 32, PL, wacom_pl_irq },
+ { "Wacom Intuos 4x5", 10, 12700, 10600, 1023, 15, INTUOS, wacom_intuos_irq },
+ { "Wacom Intuos 6x8", 10, 20320, 16240, 1023, 15, INTUOS, wacom_intuos_irq },
+ { "Wacom Intuos 9x12", 10, 30480, 24060, 1023, 15, INTUOS, wacom_intuos_irq },
+ { "Wacom Intuos 12x12", 10, 30480, 31680, 1023, 15, INTUOS, wacom_intuos_irq },
+ { "Wacom Intuos 12x18", 10, 45720, 31680, 1023, 15, INTUOS, wacom_intuos_irq },
+ { "Wacom PL400", 8, 5408, 4056, 255, 32, PL, wacom_pl_irq },
+ { "Wacom PL500", 8, 6144, 4608, 255, 32, PL, wacom_pl_irq },
+ { "Wacom PL600", 8, 6126, 4604, 255, 32, PL, wacom_pl_irq },
+ { "Wacom PL600SX", 8, 6260, 5016, 255, 32, PL, wacom_pl_irq },
+ { "Wacom PL550", 8, 6144, 4608, 511, 32, PL, wacom_pl_irq },
+ { "Wacom PL800", 8, 7220, 5780, 511, 32, PL, wacom_pl_irq },
{ "Wacom Intuos2 4x5", 10, 12700, 10600, 1023, 15, INTUOS, wacom_intuos_irq },
{ "Wacom Intuos2 6x8", 10, 20320, 16240, 1023, 15, INTUOS, wacom_intuos_irq },
{ "Wacom Intuos2 9x12", 10, 30480, 24060, 1023, 15, INTUOS, wacom_intuos_irq },
projects / linux-2.6 / commitdiff