]> err.no Git - linux-2.6/commitdiff
V4L/DVB (8097): xc5000: check device hardware state to determine if firmware download...
authorSteven Toth <stoth@linuxtv.org>
Sun, 22 Jun 2008 00:06:02 +0000 (21:06 -0300)
committerMauro Carvalho Chehab <mchehab@infradead.org>
Thu, 26 Jun 2008 18:58:58 +0000 (15:58 -0300)
This patch ensures that the xc5000 will have firmware loaded as needed if the
part is powered down or reset via gpio from the host. An example of this, in
some cases, could be after the system resumes from standby or hibernate modes.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
drivers/media/common/tuners/xc5000.c
drivers/media/common/tuners/xc5000_priv.h

index ceae6db901ecaa9543f5e4ef4bcd727e3d10cc42..7cf4f5bdb2ecef54de97f6af81407bb098964932 100644 (file)
@@ -177,6 +177,7 @@ static XC_TV_STANDARD XC5000_Standard[MAX_TV_STANDARD] = {
        {"FM Radio-INPUT1",   0x0208, 0x9002}
 };
 
+static int  xc5000_is_firmware_loaded(struct dvb_frontend *fe);
 static int  xc5000_writeregs(struct xc5000_priv *priv, u8 *buf, u8 len);
 static int  xc5000_readregs(struct xc5000_priv *priv, u8 *buf, u8 len);
 static void xc5000_TunerReset(struct dvb_frontend *fe);
@@ -352,7 +353,7 @@ static int xc_SetTVStandard(struct xc5000_priv *priv,
 
 static int xc_shutdown(struct xc5000_priv *priv)
 {
-       return 0;
+       return XC_RESULT_SUCCESS;
        /* Fixme: cannot bring tuner back alive once shutdown
         *        without reloading the driver modules.
         *    return xc_write_reg(priv, XREG_POWER_DOWN, 0);
@@ -685,6 +686,25 @@ static int xc5000_set_params(struct dvb_frontend *fe,
        return 0;
 }
 
+static int xc5000_is_firmware_loaded(struct dvb_frontend *fe)
+{
+       struct xc5000_priv *priv = fe->tuner_priv;
+       int ret;
+       u16 id;
+
+       ret = xc5000_readreg(priv, XREG_PRODUCT_ID, &id);
+       if (ret == XC_RESULT_SUCCESS) {
+               if (id == XC_PRODUCT_ID_FW_NOT_LOADED)
+                       ret = XC_RESULT_RESET_FAILURE;
+               else
+                       ret = XC_RESULT_SUCCESS;
+       }
+
+       dprintk(1, "%s() returns %s id = 0x%x\n", __func__,
+               ret == XC_RESULT_SUCCESS ? "True" : "False", id);
+       return ret;
+}
+
 static int xc_load_fw_and_init_tuner(struct dvb_frontend *fe);
 
 static int xc5000_set_analog_params(struct dvb_frontend *fe,
@@ -693,7 +713,7 @@ static int xc5000_set_analog_params(struct dvb_frontend *fe,
        struct xc5000_priv *priv = fe->tuner_priv;
        int ret;
 
-       if(priv->fwloaded == 0)
+       if (xc5000_is_firmware_loaded(fe) != XC_RESULT_SUCCESS)
                xc_load_fw_and_init_tuner(fe);
 
        dprintk(1, "%s() frequency=%d (in units of 62.5khz)\n",
@@ -808,11 +828,10 @@ static int xc_load_fw_and_init_tuner(struct dvb_frontend *fe)
        struct xc5000_priv *priv = fe->tuner_priv;
        int ret = 0;
 
-       if (priv->fwloaded == 0) {
+       if (xc5000_is_firmware_loaded(fe) != XC_RESULT_SUCCESS) {
                ret = xc5000_fwupload(fe);
                if (ret != XC_RESULT_SUCCESS)
                        return ret;
-               priv->fwloaded = 1;
        }
 
        /* Start the tuner self-calibration process */
@@ -852,7 +871,6 @@ static int xc5000_sleep(struct dvb_frontend *fe)
                return -EREMOTEIO;
        }
        else {
-               /* priv->fwloaded = 0; */
                return XC_RESULT_SUCCESS;
        }
 }
@@ -933,7 +951,6 @@ struct dvb_frontend *xc5000_attach(struct dvb_frontend *fe,
                        cfg->i2c_address);
                printk(KERN_INFO
                        "xc5000: Firmware has been loaded previously\n");
-               priv->fwloaded = 1;
                break;
        case XC_PRODUCT_ID_FW_NOT_LOADED:
                printk(KERN_INFO
@@ -941,7 +958,6 @@ struct dvb_frontend *xc5000_attach(struct dvb_frontend *fe,
                        cfg->i2c_address);
                printk(KERN_INFO
                        "xc5000: Firmware has not been loaded previously\n");
-               priv->fwloaded = 0;
                break;
        default:
                printk(KERN_ERR
index ecebfe4745adcadf30e3f2a82d31b00c3b21210e..a72a9887fe7ffeab488da51193be130ba7d98767 100644 (file)
@@ -30,7 +30,6 @@ struct xc5000_priv {
        u32 bandwidth;
        u8  video_standard;
        u8  rf_mode;
-       u8  fwloaded;
 
        void *devptr;
 };