[ARM] Acer n30: LCD support.

This patch adds the configuration needed for the LCD display on the n30.

Signed-off-by: Christer Weinigel <christer@weinigel.se>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c
index 621b343adbedf27119701c0ade2f42ad0e165752..476b15c089a722a456926f451b342fa2d2b45799 100644 (file)
--- a/arch/arm/mach-s3c2410/mach-n30.c
+++ b/arch/arm/mach-s3c2410/mach-n30.c
@@ -31,8 +31,10 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
+#include <asm/arch/fb.h>
 #include <asm/arch/leds-gpio.h>
 #include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-lcd.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/irq.h>
@@ -290,6 +292,31 @@ static struct platform_device n30_warning_led = {
        },
 };
 
+static struct s3c2410fb_display n30_display __initdata = {
+       .type = S3C2410_LCDCON1_TFT,
+       .width = 240,
+       .height = 320,
+       .pixclock = 170000,
+       .xres = 240,
+       .yres = 320,
+       .bpp = 16,
+       .left_margin = 3,
+       .right_margin = 40,
+       .hsync_len = 40,
+       .upper_margin = 2,
+       .lower_margin = 3,
+       .vsync_len = 2,
+
+       .lcdcon5 = S3C2410_LCDCON5_INVVLINE | S3C2410_LCDCON5_INVVFRAME,
+};
+
+static struct s3c2410fb_mach_info n30_fb_info __initdata = {
+       .displays = &n30_display,
+       .num_displays = 1,
+       .default_display = 0,
+       .lpcsel=        0x06,
+};
+
 static struct platform_device *n30_devices[] __initdata = {
        &s3c_device_lcd,
        &s3c_device_wdt,
@@ -334,6 +361,7 @@ static void __init n30_init_irq(void)
 
 static void __init n30_init(void)
 {
+       s3c24xx_fb_set_platdata(&n30_fb_info);
        s3c_device_i2c.dev.platform_data = &n30_i2ccfg;
        s3c24xx_udc_set_platdata(&n30_udc_cfg);