]> err.no Git - linux-2.6/commitdiff
hwmon: fix detection of abituguru volt inputs
authorHans de Goede <j.w.r.degoede@hhs.nl>
Mon, 18 Jun 2007 20:59:34 +0000 (22:59 +0200)
committerMark M. Hoffman <mhoffman@lightlink.com>
Thu, 19 Jul 2007 18:22:15 +0000 (14:22 -0400)
This patch fixes the detection of volt inputs with a reading of more then 240
units.

Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
drivers/hwmon/abituguru.c

index 11a40da135356984dd4cb1c5d636fcdf8e26f0e7..0770688f79b62c8b303ca08698a084cea1a98ede 100644 (file)
@@ -418,7 +418,7 @@ static int __devinit
 abituguru_detect_bank1_sensor_type(struct abituguru_data *data,
                                   u8 sensor_addr)
 {
-       u8 val, buf[3];
+       u8 val, test_flag, buf[3];
        int i, ret = -ENODEV; /* error is the most common used retval :| */
 
        /* If overriden by the user return the user selected type */
@@ -436,7 +436,7 @@ abituguru_detect_bank1_sensor_type(struct abituguru_data *data,
                return -ENODEV;
 
        /* Test val is sane / usable for sensor type detection. */
-       if ((val < 10u) || (val > 240u)) {
+       if ((val < 10u) || (val > 250u)) {
                printk(KERN_WARNING ABIT_UGURU_NAME
                        ": bank1-sensor: %d reading (%d) too close to limits, "
                        "unable to determine sensor type, skipping sensor\n",
@@ -449,10 +449,20 @@ abituguru_detect_bank1_sensor_type(struct abituguru_data *data,
 
        ABIT_UGURU_DEBUG(2, "testing bank1 sensor %d\n", (int)sensor_addr);
        /* Volt sensor test, enable volt low alarm, set min value ridicously
-          high. If its a volt sensor this should always give us an alarm. */
-       buf[0] = ABIT_UGURU_VOLT_LOW_ALARM_ENABLE;
-       buf[1] = 245;
-       buf[2] = 250;
+          high, or vica versa if the reading is very high. If its a volt
+          sensor this should always give us an alarm. */
+       if (val <= 240u) {
+               buf[0] = ABIT_UGURU_VOLT_LOW_ALARM_ENABLE;
+               buf[1] = 245;
+               buf[2] = 250;
+               test_flag = ABIT_UGURU_VOLT_LOW_ALARM_FLAG;
+       } else {
+               buf[0] = ABIT_UGURU_VOLT_HIGH_ALARM_ENABLE;
+               buf[1] = 5;
+               buf[2] = 10;
+               test_flag = ABIT_UGURU_VOLT_HIGH_ALARM_FLAG;
+       }
+
        if (abituguru_write(data, ABIT_UGURU_SENSOR_BANK1 + 2, sensor_addr,
                        buf, 3) != 3)
                goto abituguru_detect_bank1_sensor_type_exit;
@@ -469,13 +479,13 @@ abituguru_detect_bank1_sensor_type(struct abituguru_data *data,
                                sensor_addr, buf, 3,
                                ABIT_UGURU_MAX_RETRIES) != 3)
                        goto abituguru_detect_bank1_sensor_type_exit;
-               if (buf[0] & ABIT_UGURU_VOLT_LOW_ALARM_FLAG) {
+               if (buf[0] & test_flag) {
                        ABIT_UGURU_DEBUG(2, "  found volt sensor\n");
                        ret = ABIT_UGURU_IN_SENSOR;
                        goto abituguru_detect_bank1_sensor_type_exit;
                } else
                        ABIT_UGURU_DEBUG(2, "  alarm raised during volt "
-                               "sensor test, but volt low flag not set\n");
+                               "sensor test, but volt range flag not set\n");
        } else
                ABIT_UGURU_DEBUG(2, "  alarm not raised during volt sensor "
                        "test\n");