if (debug) printk (KERN_DEBUG "cx24123: " args); \
} while (0)
-struct cx24123_state {
-
+struct cx24123_state
+{
struct i2c_adapter* i2c;
struct dvb_frontend_ops ops;
const struct cx24123_config* config;
u32 currentsymbolrate;
};
+/* Various tuner defaults need to be established for a given symbol rate Sps */
+static struct
+{
+ u32 symbolrate_low;
+ u32 symbolrate_high;
+ u32 VCAslope;
+ u32 VCAoffset;
+ u32 VGA1offset;
+ u32 VGA2offset;
+ u32 VCAprogdata;
+ u32 VGAprogdata;
+} cx24123_AGC_vals[] =
+{
+ {
+ .symbolrate_low = 1000000,
+ .symbolrate_high = 4999999,
+ .VCAslope = 0x07,
+ .VCAoffset = 0x0f,
+ .VGA1offset = 0x1f8,
+ .VGA2offset = 0x1f8,
+ .VGAprogdata = (2 << 18) | (0x1f8 << 9) | 0x1f8,
+ .VCAprogdata = (4 << 18) | (0x07 << 9) | 0x07,
+ },
+ {
+ .symbolrate_low = 5000000,
+ .symbolrate_high = 14999999,
+ .VCAslope = 0x1f,
+ .VCAoffset = 0x1f,
+ .VGA1offset = 0x1e0,
+ .VGA2offset = 0x180,
+ .VGAprogdata = (2 << 18) | (0x180 << 9) | 0x1e0,
+ .VCAprogdata = (4 << 18) | (0x07 << 9) | 0x1f,
+ },
+ {
+ .symbolrate_low = 15000000,
+ .symbolrate_high = 45000000,
+ .VCAslope = 0x3f,
+ .VCAoffset = 0x3f,
+ .VGA1offset = 0x180,
+ .VGA2offset = 0x100,
+ .VGAprogdata = (2 << 18) | (0x100 << 9) | 0x180,
+ .VCAprogdata = (4 << 18) | (0x07 << 9) | 0x3f,
+ },
+};
+
+/*
+ * Various tuner defaults need to be established for a given frequency kHz.
+ * fixme: The bounds on the bands do not match the doc in real life.
+ * fixme: Some of them have been moved, other might need adjustment.
+ */
+static struct
+{
+ u32 freq_low;
+ u32 freq_high;
+ u32 bandselect;
+ u32 VCOdivider;
+ u32 VCOnumber;
+ u32 progdata;
+} cx24123_bandselect_vals[] =
+{
+ {
+ .freq_low = 950000,
+ .freq_high = 1018999,
+ .bandselect = 0x40,
+ .VCOdivider = 4,
+ .VCOnumber = 7,
+ .progdata = (0 << 18) | (0 << 9) | 0x40,
+ },
+ {
+ .freq_low = 1019000,
+ .freq_high = 1074999,
+ .bandselect = 0x80,
+ .VCOdivider = 4,
+ .VCOnumber = 8,
+ .progdata = (0 << 18) | (0 << 9) | 0x80,
+ },
+ {
+ .freq_low = 1075000,
+ .freq_high = 1227999,
+ .bandselect = 0x01,
+ .VCOdivider = 2,
+ .VCOnumber = 1,
+ .progdata = (0 << 18) | (1 << 9) | 0x01,
+ },
+ {
+ .freq_low = 1228000,
+ .freq_high = 1349999,
+ .bandselect = 0x02,
+ .VCOdivider = 2,
+ .VCOnumber = 2,
+ .progdata = (0 << 18) | (1 << 9) | 0x02,
+ },
+ {
+ .freq_low = 1350000,
+ .freq_high = 1481999,
+ .bandselect = 0x04,
+ .VCOdivider = 2,
+ .VCOnumber = 3,
+ .progdata = (0 << 18) | (1 << 9) | 0x04,
+ },
+ {
+ .freq_low = 1482000,
+ .freq_high = 1595999,
+ .bandselect = 0x08,
+ .VCOdivider = 2,
+ .VCOnumber = 4,
+ .progdata = (0 << 18) | (1 << 9) | 0x08,
+ },
+ {
+ .freq_low = 1596000,
+ .freq_high = 1717999,
+ .bandselect = 0x10,
+ .VCOdivider = 2,
+ .VCOnumber = 5,
+ .progdata = (0 << 18) | (1 << 9) | 0x10,
+ },
+ {
+ .freq_low = 1718000,
+ .freq_high = 1855999,
+ .bandselect = 0x20,
+ .VCOdivider = 2,
+ .VCOnumber = 6,
+ .progdata = (0 << 18) | (1 << 9) | 0x20,
+ },
+ {
+ .freq_low = 1856000,
+ .freq_high = 2035999,
+ .bandselect = 0x40,
+ .VCOdivider = 2,
+ .VCOnumber = 7,
+ .progdata = (0 << 18) | (1 << 9) | 0x40,
+ },
+ {
+ .freq_low = 2036000,
+ .freq_high = 2149999,
+ .bandselect = 0x80,
+ .VCOdivider = 2,
+ .VCOnumber = 8,
+ .progdata = (0 << 18) | (1 << 9) | 0x80,
+ },
+};
+
static struct {
u8 reg;
u8 data;
val = cx24123_readreg(state, 0x1b) >> 7;
if (val == 0)
- *inversion=INVERSION_OFF;
+ *inversion = INVERSION_OFF;
else
- *inversion=INVERSION_ON;
+ *inversion = INVERSION_ON;
return 0;
}
static int cx24123_set_fec(struct cx24123_state* state, fe_code_rate_t fec)
{
if ( (fec < FEC_NONE) || (fec > FEC_AUTO) )
- fec=FEC_AUTO;
+ fec = FEC_AUTO;
/* Hardware has 5/11 and 3/5 but are never unused */
switch (fec) {
case FEC_NONE:
- return cx24123_writereg(state, 0x0f,0x01);
+ return cx24123_writereg(state, 0x0f, 0x01);
case FEC_1_2:
return cx24123_writereg(state, 0x0f, 0x02);
case FEC_2_3:
static int cx24123_get_fec(struct cx24123_state* state, fe_code_rate_t *fec)
{
+ int ret;
u8 val;
- val = cx24123_readreg (state, 0x1b) & 0x07;
+ ret = cx24123_readreg (state, 0x1b);
+ if (ret < 0)
+ return ret;
+ val = ret & 0x07;
switch (val) {
case 1:
- *fec=FEC_1_2;
- return 0;
+ *fec = FEC_1_2;
+ break;
case 3:
- *fec=FEC_2_3;
- return 0;
+ *fec = FEC_2_3;
+ break;
case 4:
- *fec=FEC_3_4;
- return 0;
+ *fec = FEC_3_4;
+ break;
case 5:
- *fec=FEC_4_5;
- return 0;
+ *fec = FEC_4_5;
+ break;
case 6:
- *fec=FEC_5_6;
- return 0;
+ *fec = FEC_5_6;
+ break;
case 7:
- *fec=FEC_7_8;
- return 0;
- case 2: /* *fec=FEC_3_5; return 0; */
- case 0: /* *fec=FEC_5_11; return 0; */
- *fec=FEC_AUTO;
- return 0;
+ *fec = FEC_7_8;
+ break;
+ case 2: /* *fec = FEC_3_5; break; */
+ case 0: /* *fec = FEC_5_11; break; */
+ *fec = FEC_AUTO;
+ break;
default:
- *fec=FEC_NONE; return 0;
+ *fec = FEC_NONE; // can't happen
}
- return -EREMOTEIO;
+ return 0;
}
/* fixme: Symbol rates < 3MSps may not work because of precision loss */
{
u32 val;
- val = (srate/1185)*100;
+ val = (srate / 1185) * 100;
/* Compensate for scaling up, by removing 17 symbols per 1Msps */
- val = val - (17*(srate / 1000000));
+ val = val - (17 * (srate / 1000000));
- cx24123_writereg(state, 0x08, (val >>16) & 0xff );
- cx24123_writereg(state, 0x09, (val >> 8) & 0xff );
- cx24123_writereg(state, 0x0a, (val ) & 0xff );
+ cx24123_writereg(state, 0x08, (val >> 16) & 0xff );
+ cx24123_writereg(state, 0x09, (val >> 8) & 0xff );
+ cx24123_writereg(state, 0x0a, (val ) & 0xff );
return 0;
}
static int cx24123_pll_calculate(struct dvb_frontend* fe, struct dvb_frontend_parameters *p)
{
struct cx24123_state *state = fe->demodulator_priv;
- u32 ndiv=0, adiv=0, vco_div=0;
- int i=0;
+ u32 ndiv = 0, adiv = 0, vco_div = 0;
+ int i = 0;
/* Defaults for low freq, low rate */
state->VCAarg = cx24123_AGC_vals[0].VCAprogdata;
vco_div = cx24123_bandselect_vals[0].VCOdivider;
/* For the given symbolerate, determine the VCA and VGA programming bits */
- for (i=0; i < sizeof(cx24123_AGC_vals) / sizeof(cx24123_AGC_vals[0]); i++)
+ for (i = 0; i < sizeof(cx24123_AGC_vals) / sizeof(cx24123_AGC_vals[0]); i++)
{
if ((cx24123_AGC_vals[i].symbolrate_low <= p->u.qpsk.symbol_rate) &&
(cx24123_AGC_vals[i].symbolrate_high >= p->u.qpsk.symbol_rate) ) {
}
/* For the given frequency, determine the bandselect programming bits */
- for (i=0; i < sizeof(cx24123_bandselect_vals) / sizeof(cx24123_bandselect_vals[0]); i++)
+ for (i = 0; i < sizeof(cx24123_bandselect_vals) / sizeof(cx24123_bandselect_vals[0]); i++)
{
if ((cx24123_bandselect_vals[i].freq_low <= p->frequency) &&
(cx24123_bandselect_vals[i].freq_high >= p->frequency) ) {
{
struct cx24123_state *state = fe->demodulator_priv;
- u8 timeout=0;
+ u8 timeout = 0;
/* align the 21 bytes into to bit23 boundary */
data = data << 3;
/* Reset the demod pll word length to 0x15 bits */
cx24123_writereg(state, 0x21, 0x15);
- timeout=0;
+ timeout = 0;
/* write the msb 8 bits, wait for the send to be completed */
- cx24123_writereg(state, 0x22, (data>>16) & 0xff);
+ cx24123_writereg(state, 0x22, (data >> 16) & 0xff);
while ( ( cx24123_readreg(state, 0x20) & 0x40 ) == 0 )
{
/* Safety - No reason why the write should not complete, and we never get here, avoid hang */
msleep(500);
}
- timeout=0;
+ timeout = 0;
/* send another 8 bytes, wait for the send to be completed */
cx24123_writereg(state, 0x22, (data>>8) & 0xff );
while ( (cx24123_readreg(state, 0x20) & 0x40 ) == 0 )
msleep(500);
}
- timeout=0;
+ timeout = 0;
/* send the lower 5 bits of this byte, padded with 3 LBB, wait for the send to be completed */
cx24123_writereg(state, 0x22, (data) & 0xff );
while ((cx24123_readreg(state, 0x20) & 0x80))
{
struct cx24123_state *state = fe->demodulator_priv;
- if (cx24123_pll_calculate(fe, p)!=0) {
+ if (cx24123_pll_calculate(fe, p) != 0) {
printk("%s: cx24123_pll_calcutate failed\n",__FUNCTION__);
return -EINVAL;
}
int i;
/* Configure the demod to a good set of defaults */
- for (i=0; i < sizeof(cx24123_regdata) / sizeof(cx24123_regdata[0]); i++)
+ for (i = 0; i < sizeof(cx24123_regdata) / sizeof(cx24123_regdata[0]); i++)
cx24123_writereg(state, cx24123_regdata[i].reg, cx24123_regdata[i].data);
if (state->config->pll_init)
}
static int cx24123_send_diseqc_msg(struct dvb_frontend* fe,
- struct dvb_diseqc_master_cmd *cmd)
+ struct dvb_diseqc_master_cmd *cmd)
{
/* fixme: Implement diseqc */
printk("%s: No support yet\n",__FUNCTION__);
state->config->set_ts_params(fe, 0);
state->currentfreq=p->frequency;
- state->currentsymbolrate=p->u.qpsk.symbol_rate;
+ state->currentsymbolrate = p->u.qpsk.symbol_rate;
cx24123_set_inversion(state, p->inversion);
cx24123_set_fec(state, p->u.qpsk.fec_inner);
cx24123_pll_tune(fe, p);
/* Enable automatic aquisition and reset cycle */
- cx24123_writereg(state, 0x03, (cx24123_readreg(state, 0x03) | 0x07) );
+ cx24123_writereg(state, 0x03, (cx24123_readreg(state, 0x03) | 0x07));
cx24123_writereg(state, 0x00, 0x10);
cx24123_writereg(state, 0x00, 0);
static struct dvb_frontend_ops cx24123_ops;
-struct dvb_frontend* cx24123_attach(const struct cx24123_config* config, struct i2c_adapter* i2c)
+struct dvb_frontend* cx24123_attach(const struct cx24123_config* config,
+ struct i2c_adapter* i2c)
{
struct cx24123_state* state = NULL;
int ret;
MODULE_LICENSE("GPL");
EXPORT_SYMBOL(cx24123_attach);
-
int (*set_ts_params)(struct dvb_frontend* fe, int is_punctured);
};
-/* Various tuner defaults need to be established for a given symbol rate Sps */
-struct
-{
- u32 symbolrate_low;
- u32 symbolrate_high;
- u32 VCAslope;
- u32 VCAoffset;
- u32 VGA1offset;
- u32 VGA2offset;
- u32 VCAprogdata;
- u32 VGAprogdata;
-} cx24123_AGC_vals[] =
-{
- {
- .symbolrate_low = 1000000,
- .symbolrate_high = 4999999,
- .VCAslope = 0x07,
- .VCAoffset = 0x0f,
- .VGA1offset = 0x1f8,
- .VGA2offset = 0x1f8,
- .VGAprogdata = (2 << 18) | (0x1f8 << 9) | 0x1f8,
- .VCAprogdata = (4 << 18) | (0x07 << 9) | 0x07,
- },
- {
- .symbolrate_low = 5000000,
- .symbolrate_high = 14999999,
- .VCAslope = 0x1f,
- .VCAoffset = 0x1f,
- .VGA1offset = 0x1e0,
- .VGA2offset = 0x180,
- .VGAprogdata = (2 << 18) | (0x180 << 9) | 0x1e0,
- .VCAprogdata = (4 << 18) | (0x07 << 9) | 0x1f,
- },
- {
- .symbolrate_low = 15000000,
- .symbolrate_high = 45000000,
- .VCAslope = 0x3f,
- .VCAoffset = 0x3f,
- .VGA1offset = 0x180,
- .VGA2offset = 0x100,
- .VGAprogdata = (2 << 18) | (0x100 << 9) | 0x180,
- .VCAprogdata = (4 << 18) | (0x07 << 9) | 0x3f,
- },
-};
-
-/*
- * Various tuner defaults need to be established for a given frequency kHz.
- * fixme: The bounds on the bands do not match the doc in real life.
- * fixme: Some of them have been moved, other might need adjustment.
- */
-struct
-{
- u32 freq_low;
- u32 freq_high;
- u32 bandselect;
- u32 VCOdivider;
- u32 VCOnumber;
- u32 progdata;
-} cx24123_bandselect_vals[] =
-{
- {
- .freq_low = 950000,
- .freq_high = 1018999,
- .bandselect = 0x40,
- .VCOdivider = 4,
- .VCOnumber = 7,
- .progdata = (0 << 18) | (0 << 9) | 0x40,
- },
- {
- .freq_low = 1019000,
- .freq_high = 1074999,
- .bandselect = 0x80,
- .VCOdivider = 4,
- .VCOnumber = 8,
- .progdata = (0 << 18) | (0 << 9) | 0x80,
- },
- {
- .freq_low = 1075000,
- .freq_high = 1227999,
- .bandselect = 0x01,
- .VCOdivider = 2,
- .VCOnumber = 1,
- .progdata = (0 << 18) | (1 << 9) | 0x01,
- },
- {
- .freq_low = 1228000,
- .freq_high = 1349999,
- .bandselect = 0x02,
- .VCOdivider = 2,
- .VCOnumber = 2,
- .progdata = (0 << 18) | (1 << 9) | 0x02,
- },
- {
- .freq_low = 1350000,
- .freq_high = 1481999,
- .bandselect = 0x04,
- .VCOdivider = 2,
- .VCOnumber = 3,
- .progdata = (0 << 18) | (1 << 9) | 0x04,
- },
- {
- .freq_low = 1482000,
- .freq_high = 1595999,
- .bandselect = 0x08,
- .VCOdivider = 2,
- .VCOnumber = 4,
- .progdata = (0 << 18) | (1 << 9) | 0x08,
- },
- {
- .freq_low = 1596000,
- .freq_high = 1717999,
- .bandselect = 0x10,
- .VCOdivider = 2,
- .VCOnumber = 5,
- .progdata = (0 << 18) | (1 << 9) | 0x10,
- },
- {
- .freq_low = 1718000,
- .freq_high = 1855999,
- .bandselect = 0x20,
- .VCOdivider = 2,
- .VCOnumber = 6,
- .progdata = (0 << 18) | (1 << 9) | 0x20,
- },
- {
- .freq_low = 1856000,
- .freq_high = 2035999,
- .bandselect = 0x40,
- .VCOdivider = 2,
- .VCOnumber = 7,
- .progdata = (0 << 18) | (1 << 9) | 0x40,
- },
- {
- .freq_low = 2036000,
- .freq_high = 2149999,
- .bandselect = 0x80,
- .VCOdivider = 2,
- .VCOnumber = 8,
- .progdata = (0 << 18) | (1 << 9) | 0x80,
- },
-};
-
extern struct dvb_frontend* cx24123_attach(const struct cx24123_config* config,
struct i2c_adapter* i2c);
#endif /* CX24123_H */
-
projects / linux-2.6 / commitdiff