[PATCH] ppc32 8xx: use io accessor macros instead of direct memory reference

Convert core 8xx drivers to use in_xxxbe/in_xxx macros instead of direct
memory references.

Other than making IO accesses explicit (which is a plus for readability), a
common set of macros provides a unified place for the volatile flag to
constraint compiler code reordering.

There are several unlucky places at the moment which lack the volatile
flag.

Signed-off-by: Marcelo Tosatti <marcelo.tosatti@cyclades.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

diff --git a/arch/ppc/8xx_io/commproc.c b/arch/ppc/8xx_io/commproc.c
index 11726e2a4ec85c2b015d264e7486af6e1f752a8e..b42789f8eb7633853016f7a9bd64130bc6b1bf1a 100644 (file)
--- a/arch/ppc/8xx_io/commproc.c
+++ b/arch/ppc/8xx_io/commproc.c
@@ -73,7 +73,7 @@ cpm_mask_irq(unsigned int irq)
 {
        int cpm_vec = irq - CPM_IRQ_OFFSET;
 
-       ((immap_t *)IMAP_ADDR)->im_cpic.cpic_cimr &= ~(1 << cpm_vec);
+       out_be32(&((immap_t *)IMAP_ADDR)->im_cpic.cpic_cimr, in_be32(&((immap_t *)IMAP_ADDR)->im_cpic.cpic_cimr) & ~(1 << cpm_vec));
 }
 
 static void
@@ -81,7 +81,7 @@ cpm_unmask_irq(unsigned int irq)
 {
        int cpm_vec = irq - CPM_IRQ_OFFSET;
 
-       ((immap_t *)IMAP_ADDR)->im_cpic.cpic_cimr |= (1 << cpm_vec);
+       out_be32(&((immap_t *)IMAP_ADDR)->im_cpic.cpic_cimr, in_be32(&((immap_t *)IMAP_ADDR)->im_cpic.cpic_cimr) | (1 << cpm_vec));
 }
 
 static void
@@ -95,7 +95,7 @@ cpm_eoi(unsigned int irq)
 {
        int cpm_vec = irq - CPM_IRQ_OFFSET;
 
-       ((immap_t *)IMAP_ADDR)->im_cpic.cpic_cisr = (1 << cpm_vec);
+       out_be32(&((immap_t *)IMAP_ADDR)->im_cpic.cpic_cisr, (1 << cpm_vec));
 }
 
 struct hw_interrupt_type cpm_pic = {
@@ -133,7 +133,7 @@ m8xx_cpm_reset(void)
         * manual recommends it.
         * Bit 25, FAM can also be set to use FEC aggressive mode (860T).
         */
-       imp->im_siu_conf.sc_sdcr = 1;
+       out_be32(&imp->im_siu_conf.sc_sdcr, 1),
 
        /* Reclaim the DP memory for our use. */
        m8xx_cpm_dpinit();
@@ -178,10 +178,10 @@ cpm_interrupt_init(void)
 
        /* Initialize the CPM interrupt controller.
        */
-       ((immap_t *)IMAP_ADDR)->im_cpic.cpic_cicr =
+       out_be32(&((immap_t *)IMAP_ADDR)->im_cpic.cpic_cicr,
            (CICR_SCD_SCC4 | CICR_SCC_SCC3 | CICR_SCB_SCC2 | CICR_SCA_SCC1) |
-               ((CPM_INTERRUPT/2) << 13) | CICR_HP_MASK;
-       ((immap_t *)IMAP_ADDR)->im_cpic.cpic_cimr = 0;
+               ((CPM_INTERRUPT/2) << 13) | CICR_HP_MASK);
+       out_be32(&((immap_t *)IMAP_ADDR)->im_cpic.cpic_cimr, 0);
 
         /* install the CPM interrupt controller routines for the CPM
          * interrupt vectors
@@ -198,7 +198,7 @@ cpm_interrupt_init(void)
        if (setup_irq(CPM_IRQ_OFFSET + CPMVEC_ERROR, &cpm_error_irqaction))
                panic("Could not allocate CPM error IRQ!");
 
-       ((immap_t *)IMAP_ADDR)->im_cpic.cpic_cicr |= CICR_IEN;
+       out_be32(&((immap_t *)IMAP_ADDR)->im_cpic.cpic_cicr, in_be32(&((immap_t *)IMAP_ADDR)->im_cpic.cpic_cicr) | CICR_IEN);
 }
 
 /*
@@ -212,8 +212,8 @@ cpm_get_irq(struct pt_regs *regs)
        /* Get the vector by setting the ACK bit and then reading
         * the register.
         */
-       ((volatile immap_t *)IMAP_ADDR)->im_cpic.cpic_civr = 1;
-       cpm_vec = ((volatile immap_t *)IMAP_ADDR)->im_cpic.cpic_civr;
+       out_be16(&((volatile immap_t *)IMAP_ADDR)->im_cpic.cpic_civr, 1);
+       cpm_vec = in_be16(&((volatile immap_t *)IMAP_ADDR)->im_cpic.cpic_civr);
        cpm_vec >>= 11;
 
        return cpm_vec;

diff --git a/arch/ppc/syslib/m8xx_setup.c b/arch/ppc/syslib/m8xx_setup.c
index c88e2d4dceb7ae193d0c1eb5f28726322471f81d..a192719929d37dadf8770cbc0c305606ebede756 100644 (file)
--- a/arch/ppc/syslib/m8xx_setup.c
+++ b/arch/ppc/syslib/m8xx_setup.c
@@ -144,12 +144,12 @@ void __init m8xx_calibrate_decr(void)
        int freq, fp, divisor;
 
        /* Unlock the SCCR. */
-       ((volatile immap_t *)IMAP_ADDR)->im_clkrstk.cark_sccrk = ~KAPWR_KEY;
-       ((volatile immap_t *)IMAP_ADDR)->im_clkrstk.cark_sccrk = KAPWR_KEY;
+       out_be32(&((immap_t *)IMAP_ADDR)->im_clkrstk.cark_sccrk, ~KAPWR_KEY);
+       out_be32(&((immap_t *)IMAP_ADDR)->im_clkrstk.cark_sccrk, KAPWR_KEY);
 
        /* Force all 8xx processors to use divide by 16 processor clock. */
-       ((volatile immap_t *)IMAP_ADDR)->im_clkrst.car_sccr |= 0x02000000;
-
+       out_be32(&((immap_t *)IMAP_ADDR)->im_clkrst.car_sccr,
+               in_be32(&((immap_t *)IMAP_ADDR)->im_clkrst.car_sccr)|0x02000000);
        /* Processor frequency is MHz.
         * The value 'fp' is the number of decrementer ticks per second.
         */
@@ -175,28 +175,24 @@ void __init m8xx_calibrate_decr(void)
         * we guarantee the registers are locked, then we unlock them
         * for our use.
         */
-       ((volatile immap_t *)IMAP_ADDR)->im_sitk.sitk_tbscrk = ~KAPWR_KEY;
-       ((volatile immap_t *)IMAP_ADDR)->im_sitk.sitk_rtcsck = ~KAPWR_KEY;
-       ((volatile immap_t *)IMAP_ADDR)->im_sitk.sitk_tbk    = ~KAPWR_KEY;
-       ((volatile immap_t *)IMAP_ADDR)->im_sitk.sitk_tbscrk =  KAPWR_KEY;
-       ((volatile immap_t *)IMAP_ADDR)->im_sitk.sitk_rtcsck =  KAPWR_KEY;
-       ((volatile immap_t *)IMAP_ADDR)->im_sitk.sitk_tbk    =  KAPWR_KEY;
+       out_be32(&((immap_t *)IMAP_ADDR)->im_sitk.sitk_tbscrk, ~KAPWR_KEY);
+       out_be32(&((immap_t *)IMAP_ADDR)->im_sitk.sitk_rtcsck, ~KAPWR_KEY);
+       out_be32(&((immap_t *)IMAP_ADDR)->im_sitk.sitk_tbk, ~KAPWR_KEY);
+       out_be32(&((immap_t *)IMAP_ADDR)->im_sitk.sitk_tbscrk, KAPWR_KEY);
+       out_be32(&((immap_t *)IMAP_ADDR)->im_sitk.sitk_rtcsck, KAPWR_KEY);
+       out_be32(&((immap_t *)IMAP_ADDR)->im_sitk.sitk_tbk, KAPWR_KEY);
 
        /* Disable the RTC one second and alarm interrupts. */
-       ((volatile immap_t *)IMAP_ADDR)->im_sit.sit_rtcsc &=
-                                               ~(RTCSC_SIE | RTCSC_ALE);
+       out_be16(&((immap_t *)IMAP_ADDR)->im_sit.sit_rtcsc, in_be16(&((immap_t *)IMAP_ADDR)->im_sit.sit_rtcsc) & ~(RTCSC_SIE | RTCSC_ALE));
        /* Enable the RTC */
-       ((volatile immap_t *)IMAP_ADDR)->im_sit.sit_rtcsc |=
-                                               (RTCSC_RTF | RTCSC_RTE);
+       out_be16(&((immap_t *)IMAP_ADDR)->im_sit.sit_rtcsc, in_be16(&((immap_t *)IMAP_ADDR)->im_sit.sit_rtcsc) | (RTCSC_RTF | RTCSC_RTE));
 
        /* Enabling the decrementer also enables the timebase interrupts
         * (or from the other point of view, to get decrementer interrupts
         * we have to enable the timebase).  The decrementer interrupt
         * is wired into the vector table, nothing to do here for that.
         */
-       ((volatile immap_t *)IMAP_ADDR)->im_sit.sit_tbscr =
-                               ((mk_int_int_mask(DEC_INTERRUPT) << 8) |
-                                        (TBSCR_TBF | TBSCR_TBE));
+       out_be16(&((immap_t *)IMAP_ADDR)->im_sit.sit_tbscr, (mk_int_int_mask(DEC_INTERRUPT) << 8) | (TBSCR_TBF | TBSCR_TBE));
 
        if (setup_irq(DEC_INTERRUPT, &tbint_irqaction))
                panic("Could not allocate timer IRQ!");
@@ -216,9 +212,9 @@ void __init m8xx_calibrate_decr(void)
 static int
 m8xx_set_rtc_time(unsigned long time)
 {
-       ((volatile immap_t *)IMAP_ADDR)->im_sitk.sitk_rtck = KAPWR_KEY;
-       ((volatile immap_t *)IMAP_ADDR)->im_sit.sit_rtc = time;
-       ((volatile immap_t *)IMAP_ADDR)->im_sitk.sitk_rtck = ~KAPWR_KEY;
+       out_be32(&((immap_t *)IMAP_ADDR)->im_sitk.sitk_rtck, KAPWR_KEY);
+       out_be32(&((immap_t *)IMAP_ADDR)->im_sit.sit_rtc, time);
+       out_be32(&((immap_t *)IMAP_ADDR)->im_sitk.sitk_rtck, ~KAPWR_KEY);
        return(0);
 }
 
@@ -226,7 +222,7 @@ static unsigned long
 m8xx_get_rtc_time(void)
 {
        /* Get time from the RTC. */
-       return((unsigned long)(((immap_t *)IMAP_ADDR)->im_sit.sit_rtc));
+       return (unsigned long) in_be32(&((immap_t *)IMAP_ADDR)->im_sit.sit_rtc);
 }
 
 static void
@@ -235,13 +231,13 @@ m8xx_restart(char *cmd)
        __volatile__ unsigned char dummy;
 
        local_irq_disable();
-       ((immap_t *)IMAP_ADDR)->im_clkrst.car_plprcr |= 0x00000080;
+       out_be32(&((immap_t *)IMAP_ADDR)->im_clkrst.car_plprcr, in_be32(&((immap_t *)IMAP_ADDR)->im_clkrst.car_plprcr) | 0x00000080);
 
        /* Clear the ME bit in MSR to cause checkstop on machine check
        */
        mtmsr(mfmsr() & ~0x1000);
 
-       dummy = ((immap_t *)IMAP_ADDR)->im_clkrst.res[0];
+       dummy = in_8(&((immap_t *)IMAP_ADDR)->im_clkrst.res[0]);
        printk("Restart failed\n");
        while(1);
 }
@@ -306,8 +302,7 @@ m8xx_init_IRQ(void)
        i8259_init(0);
 
        /* The i8259 cascade interrupt must be level sensitive. */
-       ((immap_t *)IMAP_ADDR)->im_siu_conf.sc_siel &=
-               ~(0x80000000 >> ISA_BRIDGE_INT);
+       out_be32(&((immap_t *)IMAP_ADDR)->im_siu_conf.sc_siel, in_be32(&((immap_t *)IMAP_ADDR)->im_siu_conf.sc_siel & ~(0x80000000 >> ISA_BRIDGE_INT)));
 
        if (setup_irq(ISA_BRIDGE_INT, &mbx_i8259_irqaction))
                enable_irq(ISA_BRIDGE_INT);

diff --git a/arch/ppc/syslib/m8xx_wdt.c b/arch/ppc/syslib/m8xx_wdt.c
index 2ddc857e7fc791521e24b850165104f7658ce539..c5ac5ce5d7d2d29e1cdac44f15cd24ee5e95447d 100644 (file)
--- a/arch/ppc/syslib/m8xx_wdt.c
+++ b/arch/ppc/syslib/m8xx_wdt.c
@@ -29,8 +29,8 @@ void m8xx_wdt_reset(void)
 {
        volatile immap_t *imap = (volatile immap_t *)IMAP_ADDR;
 
-       imap->im_siu_conf.sc_swsr = 0x556c;     /* write magic1 */
-       imap->im_siu_conf.sc_swsr = 0xaa39;     /* write magic2 */
+       out_be16(imap->im_siu_conf.sc_swsr, 0x556c);    /* write magic1 */
+       out_be16(imap->im_siu_conf.sc_swsr, 0xaa39);    /* write magic2 */
 }
 
 static irqreturn_t m8xx_wdt_interrupt(int irq, void *dev, struct pt_regs *regs)
@@ -39,7 +39,7 @@ static irqreturn_t m8xx_wdt_interrupt(int irq, void *dev, struct pt_regs *regs)
 
        m8xx_wdt_reset();
 
-       imap->im_sit.sit_piscr |= PISCR_PS;     /* clear irq */
+       out_be16(imap->im_sit.sit_piscr, in_be16(imap->im_sit.sit_piscr | PISCR_PS));   /* clear irq */
 
        return IRQ_HANDLED;
 }
@@ -51,7 +51,7 @@ void __init m8xx_wdt_handler_install(bd_t * binfo)
        u32 sypcr;
        u32 pitrtclk;
 
-       sypcr = imap->im_siu_conf.sc_sypcr;
+       sypcr = in_be32(imap->im_siu_conf.sc_sypcr);
 
        if (!(sypcr & 0x04)) {
                printk(KERN_NOTICE "m8xx_wdt: wdt disabled (SYPCR: 0x%08X)\n",
@@ -87,9 +87,9 @@ void __init m8xx_wdt_handler_install(bd_t * binfo)
        else
                pitc = pitrtclk * wdt_timeout / binfo->bi_intfreq / 2;
 
-       imap->im_sit.sit_pitc = pitc << 16;
-       imap->im_sit.sit_piscr =
-           (mk_int_int_mask(PIT_INTERRUPT) << 8) | PISCR_PIE | PISCR_PTE;
+       out_be32(imap->im_sit.sit_pitc, pitc << 16);
+
+       out_be16(imap->im_sit.sit_piscr, (mk_int_int_mask(PIT_INTERRUPT) << 8) | PISCR_PIE | PISCR_PTE);
 
        if (setup_irq(PIT_INTERRUPT, &m8xx_wdt_irqaction))
                panic("m8xx_wdt: error setting up the watchdog irq!");

diff --git a/arch/ppc/syslib/ppc8xx_pic.c b/arch/ppc/syslib/ppc8xx_pic.c
index d3b01c6c97de9b3b0e38f71ce4640341949cf42b..3e6f51a61d468c79e18f6046f93d6bd7ca4b6f50 100644 (file)
--- a/arch/ppc/syslib/ppc8xx_pic.c
+++ b/arch/ppc/syslib/ppc8xx_pic.c
@@ -6,6 +6,7 @@
 #include <linux/signal.h>
 #include <linux/interrupt.h>
 #include <asm/irq.h>
+#include <asm/io.h>
 #include <asm/8xx_immap.h>
 #include <asm/mpc8xx.h>
 #include "ppc8xx_pic.h"
@@ -29,8 +30,7 @@ static void m8xx_mask_irq(unsigned int irq_nr)
        word = irq_nr >> 5;
 
        ppc_cached_irq_mask[word] &= ~(1 << (31-bit));
-       ((immap_t *)IMAP_ADDR)->im_siu_conf.sc_simask =
-                                               ppc_cached_irq_mask[word];
+       out_be32(&((immap_t *)IMAP_ADDR)->im_siu_conf.sc_simask, ppc_cached_irq_mask[word]);
 }
 
 static void m8xx_unmask_irq(unsigned int irq_nr)
@@ -41,8 +41,7 @@ static void m8xx_unmask_irq(unsigned int irq_nr)
        word = irq_nr >> 5;
 
        ppc_cached_irq_mask[word] |= (1 << (31-bit));
-       ((immap_t *)IMAP_ADDR)->im_siu_conf.sc_simask =
-                                               ppc_cached_irq_mask[word];
+       out_be32(&((immap_t *)IMAP_ADDR)->im_siu_conf.sc_simask, ppc_cached_irq_mask[word]);
 }
 
 static void m8xx_end_irq(unsigned int irq_nr)
@@ -55,8 +54,7 @@ static void m8xx_end_irq(unsigned int irq_nr)
                word = irq_nr >> 5;
 
                ppc_cached_irq_mask[word] |= (1 << (31-bit));
-               ((immap_t *)IMAP_ADDR)->im_siu_conf.sc_simask =
-                       ppc_cached_irq_mask[word];
+               out_be32(&((immap_t *)IMAP_ADDR)->im_siu_conf.sc_simask, ppc_cached_irq_mask[word]);
        }
 }
 
@@ -69,9 +67,8 @@ static void m8xx_mask_and_ack(unsigned int irq_nr)
        word = irq_nr >> 5;
 
        ppc_cached_irq_mask[word] &= ~(1 << (31-bit));
-       ((immap_t *)IMAP_ADDR)->im_siu_conf.sc_simask =
-                                               ppc_cached_irq_mask[word];
-       ((immap_t *)IMAP_ADDR)->im_siu_conf.sc_sipend = 1 << (31-bit);
+       out_be32(&((immap_t *)IMAP_ADDR)->im_siu_conf.sc_simask, ppc_cached_irq_mask[word]);
+       out_be32(&((immap_t *)IMAP_ADDR)->im_siu_conf.sc_sipend, 1 << (31-bit));
 }
 
 struct hw_interrupt_type ppc8xx_pic = {
@@ -93,7 +90,7 @@ m8xx_get_irq(struct pt_regs *regs)
        /* For MPC8xx, read the SIVEC register and shift the bits down
         * to get the irq number.
         */
-       irq = ((immap_t *)IMAP_ADDR)->im_siu_conf.sc_sivec >> 26;
+       irq = in_be32(&((immap_t *)IMAP_ADDR)->im_siu_conf.sc_sivec) >> 26;
 
        /*
         * When we read the sivec without an interrupt to process, we will