struct mptsas_devinfo {
u16 handle; /* unique id to address this device */
u16 handle_parent; /* unique id to address parent device */
+ u16 handle_enclosure; /* enclosure identifier of the enclosure */
+ u16 slot; /* physical slot in enclosure */
u8 phy_id; /* phy number of parent device */
u8 port_id; /* sas physical port this device
is assoc'd with */
struct mptsas_phyinfo *phy_info;
};
+struct mptsas_enclosure {
+ u64 enclosure_logical_id; /* The WWN for the enclosure */
+ u16 enclosure_handle; /* unique id to address this */
+ u16 flags; /* details enclosure management */
+ u16 num_slot; /* num slots */
+ u16 start_slot; /* first slot */
+ u8 start_id; /* starting logical target id */
+ u8 start_channel; /* starting logical channel id */
+ u8 sep_id; /* SEP device logical target id */
+ u8 sep_channel; /* SEP channel logical channel id */
+};
+
#ifdef SASDEBUG
static void mptsas_print_phy_data(MPI_SAS_IO_UNIT0_PHY_DATA *phy_data)
printk("---- SAS DEVICE PAGE 0 ---------\n");
printk("Handle=0x%X\n" ,le16_to_cpu(pg0->DevHandle));
+ printk("Parent Handle=0x%X\n" ,le16_to_cpu(pg0->ParentDevHandle));
printk("Enclosure Handle=0x%X\n", le16_to_cpu(pg0->EnclosureHandle));
printk("Slot=0x%X\n", le16_to_cpu(pg0->Slot));
printk("SAS Address=0x%llX\n", le64_to_cpu(sas_address));
#define mptsas_print_expander_pg1(pg1) do { } while (0)
#endif
+static inline MPT_ADAPTER *phy_to_ioc(struct sas_phy *phy)
+{
+ struct Scsi_Host *shost = dev_to_shost(phy->dev.parent);
+ return ((MPT_SCSI_HOST *)shost->hostdata)->ioc;
+}
+
+static inline MPT_ADAPTER *rphy_to_ioc(struct sas_rphy *rphy)
+{
+ struct Scsi_Host *shost = dev_to_shost(rphy->dev.parent->parent);
+ return ((MPT_SCSI_HOST *)shost->hostdata)->ioc;
+}
+
+static int
+mptsas_sas_exclosure_pg0(MPT_ADAPTER *ioc, struct mptsas_enclosure *enclosure,
+ u32 form, u32 form_specific)
+{
+ ConfigExtendedPageHeader_t hdr;
+ CONFIGPARMS cfg;
+ SasEnclosurePage0_t *buffer;
+ dma_addr_t dma_handle;
+ int error;
+ __le64 le_identifier;
+
+ memset(&hdr, 0, sizeof(hdr));
+ hdr.PageVersion = MPI_SASENCLOSURE0_PAGEVERSION;
+ hdr.PageNumber = 0;
+ hdr.PageType = MPI_CONFIG_PAGETYPE_EXTENDED;
+ hdr.ExtPageType = MPI_CONFIG_EXTPAGETYPE_ENCLOSURE;
+
+ cfg.cfghdr.ehdr = &hdr;
+ cfg.physAddr = -1;
+ cfg.pageAddr = form + form_specific;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
+ cfg.dir = 0; /* read */
+ cfg.timeout = 10;
+
+ error = mpt_config(ioc, &cfg);
+ if (error)
+ goto out;
+ if (!hdr.ExtPageLength) {
+ error = -ENXIO;
+ goto out;
+ }
+
+ buffer = pci_alloc_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
+ &dma_handle);
+ if (!buffer) {
+ error = -ENOMEM;
+ goto out;
+ }
+
+ cfg.physAddr = dma_handle;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
+
+ error = mpt_config(ioc, &cfg);
+ if (error)
+ goto out_free_consistent;
+
+ /* save config data */
+ memcpy(&le_identifier, &buffer->EnclosureLogicalID, sizeof(__le64));
+ enclosure->enclosure_logical_id = le64_to_cpu(le_identifier);
+ enclosure->enclosure_handle = le16_to_cpu(buffer->EnclosureHandle);
+ enclosure->flags = le16_to_cpu(buffer->Flags);
+ enclosure->num_slot = le16_to_cpu(buffer->NumSlots);
+ enclosure->start_slot = le16_to_cpu(buffer->StartSlot);
+ enclosure->start_id = buffer->StartTargetID;
+ enclosure->start_channel = buffer->StartBus;
+ enclosure->sep_id = buffer->SEPTargetID;
+ enclosure->sep_channel = buffer->SEPBus;
+
+ out_free_consistent:
+ pci_free_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
+ buffer, dma_handle);
+ out:
+ return error;
+}
/*
* This is pretty ugly. We will be able to seriously clean it up
.use_clustering = ENABLE_CLUSTERING,
};
-static inline MPT_ADAPTER *phy_to_ioc(struct sas_phy *phy)
-{
- struct Scsi_Host *shost = dev_to_shost(phy->dev.parent);
- return ((MPT_SCSI_HOST *)shost->hostdata)->ioc;
-}
-
static int mptsas_get_linkerrors(struct sas_phy *phy)
{
MPT_ADAPTER *ioc = phy_to_ioc(phy);
return error;
}
+static int
+mptsas_get_enclosure_identifier(struct sas_rphy *rphy, u64 *identifier)
+{
+ MPT_ADAPTER *ioc = rphy_to_ioc(rphy);
+ int i, error;
+ struct mptsas_portinfo *p;
+ struct mptsas_enclosure enclosure_info;
+ u64 enclosure_handle;
+
+ mutex_lock(&ioc->sas_topology_mutex);
+ list_for_each_entry(p, &ioc->sas_topology, list) {
+ for (i = 0; i < p->num_phys; i++) {
+ if (p->phy_info[i].attached.sas_address ==
+ rphy->identify.sas_address) {
+ enclosure_handle = p->phy_info[i].
+ attached.handle_enclosure;
+ goto found_info;
+ }
+ }
+ }
+ mutex_unlock(&ioc->sas_topology_mutex);
+ return -ENXIO;
+
+ found_info:
+ mutex_unlock(&ioc->sas_topology_mutex);
+ memset(&enclosure_info, 0, sizeof(struct mptsas_enclosure));
+ error = mptsas_sas_exclosure_pg0(ioc, &enclosure_info,
+ (MPI_SAS_ENCLOS_PGAD_FORM_HANDLE <<
+ MPI_SAS_ENCLOS_PGAD_FORM_SHIFT), enclosure_handle);
+ if (!error)
+ *identifier = enclosure_info.enclosure_logical_id;
+ return error;
+}
+
+static int
+mptsas_get_bay_identifier(struct sas_rphy *rphy)
+{
+ MPT_ADAPTER *ioc = rphy_to_ioc(rphy);
+ struct mptsas_portinfo *p;
+ int i, rc;
+
+ mutex_lock(&ioc->sas_topology_mutex);
+ list_for_each_entry(p, &ioc->sas_topology, list) {
+ for (i = 0; i < p->num_phys; i++) {
+ if (p->phy_info[i].attached.sas_address ==
+ rphy->identify.sas_address) {
+ rc = p->phy_info[i].attached.slot;
+ goto out;
+ }
+ }
+ }
+ rc = -ENXIO;
+ out:
+ mutex_unlock(&ioc->sas_topology_mutex);
+ return rc;
+}
+
static struct sas_function_template mptsas_transport_functions = {
.get_linkerrors = mptsas_get_linkerrors,
+ .get_enclosure_identifier = mptsas_get_enclosure_identifier,
+ .get_bay_identifier = mptsas_get_bay_identifier,
.phy_reset = mptsas_phy_reset,
};
device_info->handle = le16_to_cpu(buffer->DevHandle);
device_info->handle_parent = le16_to_cpu(buffer->ParentDevHandle);
+ device_info->handle_enclosure =
+ le16_to_cpu(buffer->EnclosureHandle);
+ device_info->slot = le16_to_cpu(buffer->Slot);
device_info->phy_id = buffer->PhyNum;
device_info->port_id = buffer->PhysicalPort;
device_info->id = buffer->TargetID;
case MPTSAS_ADD_DEVICE:
/*
- * When there is no sas address,
- * RAID volumes are being deleted,
- * and hidden phy disk are being added.
- * We don't know the SAS data yet,
- * so lookup sas device page to get
- * pertaining info
+ * Refresh sas device pg0 data
*/
- if (!ev->sas_address) {
- if (mptsas_sas_device_pg0(ioc,
- &sas_device, ev->id,
- (MPI_SAS_DEVICE_PGAD_FORM_BUS_TARGET_ID <<
- MPI_SAS_DEVICE_PGAD_FORM_SHIFT)))
- break;
- ev->handle = sas_device.handle;
- ev->parent_handle = sas_device.handle_parent;
- ev->channel = sas_device.channel;
- ev->phy_id = sas_device.phy_id;
- ev->sas_address = sas_device.sas_address;
- ev->device_info = sas_device.device_info;
- }
+ if (mptsas_sas_device_pg0(ioc, &sas_device,
+ (MPI_SAS_DEVICE_PGAD_FORM_BUS_TARGET_ID <<
+ MPI_SAS_DEVICE_PGAD_FORM_SHIFT), ev->id))
+ break;
phy_info = mptsas_find_phyinfo_by_parent(ioc,
- ev->parent_handle, ev->phy_id);
+ sas_device.handle_parent, sas_device.phy_id);
if (!phy_info) {
printk("mptsas: add event for non-existant PHY.\n");
break;
break;
}
- /* fill attached info */
- phy_info->attached.handle = ev->handle;
- phy_info->attached.phy_id = ev->phy_id;
- phy_info->attached.port_id = phy_info->identify.port_id;
- phy_info->attached.id = ev->id;
- phy_info->attached.channel = ev->channel;
- phy_info->attached.sas_address = ev->sas_address;
- phy_info->attached.device_info = ev->device_info;
+ memcpy(&phy_info->attached, &sas_device,
+ sizeof(struct mptsas_devinfo));
if (phy_info->attached.device_info & MPI_SAS_DEVICE_INFO_SSP_TARGET)
ds = "ssp";
if (!rphy)
break; /* non-fatal: an rphy can be added later */
- rphy->scsi_target_id = phy_info->attached.id;
mptsas_parse_device_info(&rphy->identify, &phy_info->attached);
if (sas_rphy_add(rphy)) {
sas_rphy_free(rphy);
projects / linux-2.6 / commitdiff