This is needed if we wish to change the size of the resource structures.
Based on an original patch from Vivek Goyal <vgoyal@in.ibm.com>
Cc: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
amba_attr(id, "%08x\n", dev->periphid);
amba_attr(irq0, "%u\n", dev->irq[0]);
amba_attr(irq1, "%u\n", dev->irq[1]);
-amba_attr(resource, "\t%08lx\t%08lx\t%08lx\n",
- dev->res.start, dev->res.end, dev->res.flags);
+amba_attr(resource, "\t%016llx\t%016llx\t%016lx\n",
+ (unsigned long long)dev->res.start, (unsigned long long)dev->res.end,
+ dev->res.flags);
/**
* amba_device_register - register an AMBA device
}
PRINTD (DBG_INFO, "found Madge ATM adapter (amb) at"
- " IO %lx, IRQ %u, MEM %p", pci_resource_start(pci_dev, 1),
+ " IO %llx, IRQ %u, MEM %p",
+ (unsigned long long)pci_resource_start(pci_dev, 1),
irq, bus_to_virt(pci_resource_start(pci_dev, 0)));
// check IO region
func_enter ();
pci_dev = dev->pci_dev;
- printk (KERN_INFO "found a FireStream %d card, base %08lx, irq%d.\n",
+ printk (KERN_INFO "found a FireStream %d card, base %16llx, irq%d.\n",
IS_FS50(dev)?50:155,
- pci_resource_start(pci_dev, 0), dev->pci_dev->irq);
+ (unsigned long long)pci_resource_start(pci_dev, 0),
+ dev->pci_dev->irq);
if (fs_debug & FS_DEBUG_INIT)
my_hd ((unsigned char *) dev, sizeof (*dev));
DPRINTK("waiting for probe_comp\n");
wait_for_completion(&host->probe_comp);
- printk(KERN_INFO "%s: pci %s, ports %d, io %lx, irq %u, major %d\n",
+ printk(KERN_INFO "%s: pci %s, ports %d, io %llx, irq %u, major %d\n",
host->name, pci_name(pdev), (int) CARM_MAX_PORTS,
- pci_resource_start(pdev, 0), pdev->irq, host->major);
+ (unsigned long long)pci_resource_start(pdev, 0),
+ pdev->irq, host->major);
carm_host_id++;
pci_set_drvdata(pdev, host);
RamIO = ioremap(dev->resource[0].start, LEN_RAM_IO);
if (!RamIO) {
- printk(KERN_INFO "ac.o: Failed to ioremap PCI memory space at 0x%lx\n", dev->resource[0].start);
+ printk(KERN_INFO "ac.o: Failed to ioremap PCI memory "
+ "space at 0x%llx\n",
+ (unsigned long long)dev->resource[0].start);
pci_disable_device(dev);
return -EIO;
}
- printk(KERN_INFO "Applicom %s found at mem 0x%lx, irq %d\n",
- applicom_pci_devnames[dev->device-1], dev->resource[0].start,
+ printk(KERN_INFO "Applicom %s found at mem 0x%llx, irq %d\n",
+ applicom_pci_devnames[dev->device-1],
+ (unsigned long long)dev->resource[0].start,
dev->irq);
boardno = ac_register_board(dev->resource[0].start, RamIO,0);
buf = reg_read(ohci, OHCI1394_Version);
sprintf (irq_buf, "%d", ohci->dev->irq);
PRINT(KERN_INFO, "OHCI-1394 %d.%d (PCI): IRQ=[%s] "
- "MMIO=[%lx-%lx] Max Packet=[%d] IR/IT contexts=[%d/%d]",
+ "MMIO=[%llx-%llx] Max Packet=[%d] IR/IT contexts=[%d/%d]",
((((buf) >> 16) & 0xf) + (((buf) >> 20) & 0xf) * 10),
((((buf) >> 4) & 0xf) + ((buf) & 0xf) * 10), irq_buf,
- pci_resource_start(ohci->dev, 0),
- pci_resource_start(ohci->dev, 0) + OHCI1394_REGISTER_SIZE - 1,
+ (unsigned long long)pci_resource_start(ohci->dev, 0),
+ (unsigned long long)pci_resource_start(ohci->dev, 0) + OHCI1394_REGISTER_SIZE - 1,
ohci->max_packet_size,
ohci->nb_iso_rcv_ctx, ohci->nb_iso_xmit_ctx);
* clearly says it's 2kb, so this shouldn't be a problem. */
ohci_base = pci_resource_start(dev, 0);
if (pci_resource_len(dev, 0) < OHCI1394_REGISTER_SIZE)
- PRINT(KERN_WARNING, "PCI resource length of %lx too small!",
- pci_resource_len(dev, 0));
+ PRINT(KERN_WARNING, "PCI resource length of 0x%llx too small!",
+ (unsigned long long)pci_resource_len(dev, 0));
/* Seems PCMCIA handles this internally. Not sure why. Seems
* pretty bogus to force a driver to special case this. */
#ifndef PCMCIA
if (!request_mem_region (ohci_base, OHCI1394_REGISTER_SIZE, OHCI1394_DRIVER_NAME))
- FAIL(-ENOMEM, "MMIO resource (0x%lx - 0x%lx) unavailable",
- ohci_base, ohci_base + OHCI1394_REGISTER_SIZE);
+ FAIL(-ENOMEM, "MMIO resource (0x%llx - 0x%llx) unavailable",
+ (unsigned long long)ohci_base,
+ (unsigned long long)ohci_base + OHCI1394_REGISTER_SIZE);
#endif
ohci->init_state = OHCI_INIT_HAVE_MEM_REGION;
for (j = 0; j < 6; j++) {
if (!pdev->resource[j].start)
continue;
- ipath_cdbg(VERBOSE, "BAR %d start %lx, end %lx, len %lx\n",
- j, pdev->resource[j].start,
- pdev->resource[j].end,
- pci_resource_len(pdev, j));
+ ipath_cdbg(VERBOSE, "BAR %d start %llx, end %llx, len %llx\n",
+ j, (unsigned long long)pdev->resource[j].start,
+ (unsigned long long)pdev->resource[j].end,
+ (unsigned long long)pci_resource_len(pdev, j));
}
if (!addr) {
if (dev_lim->uar_size > pci_resource_len(mdev->pdev, 2)) {
mthca_err(mdev, "HCA reported UAR size of 0x%x bigger than "
- "PCI resource 2 size of 0x%lx, aborting.\n",
- dev_lim->uar_size, pci_resource_len(mdev->pdev, 2));
+ "PCI resource 2 size of 0x%llx, aborting.\n",
+ dev_lim->uar_size,
+ (unsigned long long)pci_resource_len(mdev->pdev, 2));
return -ENODEV;
}
strlcpy(ct82c710_port->name, "C&T 82c710 mouse port",
sizeof(ct82c710_port->name));
snprintf(ct82c710_port->phys, sizeof(ct82c710_port->phys),
- "isa%04lx/serio0", CT82C710_DATA);
+ "isa%16llx/serio0", (unsigned long long)CT82C710_DATA);
serio_register_port(ct82c710_port);
serio_register_port(ct82c710_port);
- printk(KERN_INFO "serio: C&T 82c710 mouse port at %#lx irq %d\n",
- CT82C710_DATA, CT82C710_IRQ);
+ printk(KERN_INFO "serio: C&T 82c710 mouse port at %#llx irq %d\n",
+ (unsigned long long)CT82C710_DATA, CT82C710_IRQ);
return 0;
}
cs->hw.teles0.membase = ioremap(pci_resource_start(dev_tel, 0),
PAGE_SIZE);
- printk(KERN_INFO "Found: Zoran, base-address: 0x%lx, irq: 0x%x\n",
- pci_resource_start(dev_tel, 0), dev_tel->irq);
+ printk(KERN_INFO "Found: Zoran, base-address: 0x%llx, irq: 0x%x\n",
+ (unsigned long long)pci_resource_start(dev_tel, 0),
+ dev_tel->irq);
} else {
printk(KERN_WARNING "TelesPCI: No PCI card found\n");
return(0);
/* MacIO itself has a different reg, we use it's PCI base */
if (np == chip->of_node) {
- sprintf(dev->ofdev.dev.bus_id, "%1d.%08lx:%.*s",
+ sprintf(dev->ofdev.dev.bus_id, "%1d.%016llx:%.*s",
chip->lbus.index,
#ifdef CONFIG_PCI
- pci_resource_start(chip->lbus.pdev, 0),
+ (unsigned long long)pci_resource_start(chip->lbus.pdev, 0),
#else
0, /* NuBus may want to do something better here */
#endif
c->mem_alloc = 1;
sb->current_mem_size = 1 + res->end - res->start;
sb->current_mem_base = res->start;
- osm_info("%s: allocated %ld bytes of PCI memory at "
- "0x%08lX.\n", c->name,
- 1 + res->end - res->start, res->start);
+ osm_info("%s: allocated %llu bytes of PCI memory at "
+ "0x%016llX.\n", c->name,
+ (unsigned long long)(1 + res->end - res->start),
+ (unsigned long long)res->start);
}
}
c->io_alloc = 1;
sb->current_io_size = 1 + res->end - res->start;
sb->current_mem_base = res->start;
- osm_info("%s: allocated %ld bytes of PCI I/O at 0x%08lX"
- ".\n", c->name, 1 + res->end - res->start,
- res->start);
+ osm_info("%s: allocated %llu bytes of PCI I/O at "
+ "0x%016llX.\n", c->name,
+ (unsigned long long)(1 + res->end - res->start),
+ (unsigned long long)res->start);
}
}
mmc_add_host(mmc);
- printk(KERN_INFO "%s: MMCI rev %x cfg %02x at 0x%08lx irq %d,%d\n",
+ printk(KERN_INFO "%s: MMCI rev %x cfg %02x at 0x%016llx irq %d,%d\n",
mmc_hostname(mmc), amba_rev(dev), amba_config(dev),
- dev->res.start, dev->irq[0], dev->irq[1]);
+ (unsigned long long)dev->res.start, dev->irq[0], dev->irq[1]);
init_timer(&host->timer);
host->timer.data = (unsigned long)host;
if ((pci_resource_start(pdev, i) == 0) ||
(pci_resource_len(pdev, i) < bar_sizes[i])) {
dev_printk(KERN_ERR, &pdev->dev,
- "invalid PCI BAR %u (sz 0x%lx, val 0x%lx)\n",
- i,
- pci_resource_start(pdev, i),
- pci_resource_len(pdev, i));
+ "invalid PCI BAR %u (sz 0x%llx, val 0x%llx)\n",
+ i,
+ (unsigned long long)pci_resource_start(pdev, i),
+ (unsigned long long)pci_resource_len(pdev, i));
rc = -ENODEV;
goto err_out_regions;
}