return ret;
}
-int jffs2_flash_writev(struct jffs2_sb_info *c, const struct kvec *invecs, unsigned long count, loff_t to, size_t *retlen, uint32_t ino)
+
+static size_t jffs2_fill_wbuf(struct jffs2_sb_info *c, const uint8_t *buf,
+ size_t len)
{
- struct kvec outvecs[3];
- uint32_t totlen = 0;
- uint32_t split_ofs = 0;
- uint32_t old_totlen;
- int ret, splitvec = -1;
- int invec, outvec;
- size_t wbuf_retlen;
- unsigned char *wbuf_ptr;
- size_t donelen = 0;
+ if (len && !c->wbuf_len && (len >= c->wbuf_pagesize))
+ return 0;
+
+ if (len > (c->wbuf_pagesize - c->wbuf_len))
+ len = c->wbuf_pagesize - c->wbuf_len;
+ memcpy(c->wbuf + c->wbuf_len, buf, len);
+ c->wbuf_len += (uint32_t) len;
+ return len;
+}
+
+int jffs2_flash_writev(struct jffs2_sb_info *c, const struct kvec *invecs,
+ unsigned long count, loff_t to, size_t *retlen,
+ uint32_t ino)
+{
+ struct jffs2_eraseblock *jeb;
+ size_t wbuf_retlen, donelen = 0;
uint32_t outvec_to = to;
+ int ret, invec;
- /* If not NAND flash, don't bother */
+ /* If not writebuffered flash, don't bother */
if (!jffs2_is_writebuffered(c))
return jffs2_flash_direct_writev(c, invecs, count, to, retlen);
memset(c->wbuf,0xff,c->wbuf_pagesize);
}
- /* Fixup the wbuf if we are moving to a new eraseblock. The checks below
- fail for ECC'd NOR because cleanmarker == 16, so a block starts at
- xxx0010. */
+ /*
+ * Fixup the wbuf if we are moving to a new eraseblock. The
+ * checks below fail for ECC'd NOR because cleanmarker == 16,
+ * so a block starts at xxx0010.
+ */
if (jffs2_nor_ecc(c)) {
if (((c->wbuf_ofs % c->sector_size) == 0) && !c->wbuf_len) {
c->wbuf_ofs = PAGE_DIV(to);
}
}
- /* Sanity checks on target address.
- It's permitted to write at PAD(c->wbuf_len+c->wbuf_ofs),
- and it's permitted to write at the beginning of a new
- erase block. Anything else, and you die.
- New block starts at xxx000c (0-b = block header)
- */
+ /*
+ * Sanity checks on target address. It's permitted to write
+ * at PAD(c->wbuf_len+c->wbuf_ofs), and it's permitted to
+ * write at the beginning of a new erase block. Anything else,
+ * and you die. New block starts at xxx000c (0-b = block
+ * header)
+ */
if (SECTOR_ADDR(to) != SECTOR_ADDR(c->wbuf_ofs)) {
/* It's a write to a new block */
if (c->wbuf_len) {
- D1(printk(KERN_DEBUG "jffs2_flash_writev() to 0x%lx causes flush of wbuf at 0x%08x\n", (unsigned long)to, c->wbuf_ofs));
+ D1(printk(KERN_DEBUG "jffs2_flash_writev() to 0x%lx "
+ "causes flush of wbuf at 0x%08x\n",
+ (unsigned long)to, c->wbuf_ofs));
ret = __jffs2_flush_wbuf(c, PAD_NOACCOUNT);
- if (ret) {
- /* the underlying layer has to check wbuf_len to do the cleanup */
- D1(printk(KERN_WARNING "jffs2_flush_wbuf() called from jffs2_flash_writev() failed %d\n", ret));
- *retlen = 0;
- goto exit;
- }
+ if (ret)
+ goto outerr;
}
/* set pointer to new block */
c->wbuf_ofs = PAGE_DIV(to);
if (to != PAD(c->wbuf_ofs + c->wbuf_len)) {
/* We're not writing immediately after the writebuffer. Bad. */
- printk(KERN_CRIT "jffs2_flash_writev(): Non-contiguous write to %08lx\n", (unsigned long)to);
+ printk(KERN_CRIT "jffs2_flash_writev(): Non-contiguous write "
+ "to %08lx\n", (unsigned long)to);
if (c->wbuf_len)
printk(KERN_CRIT "wbuf was previously %08x-%08x\n",
- c->wbuf_ofs, c->wbuf_ofs+c->wbuf_len);
- BUG();
- }
-
- /* Note outvecs[3] above. We know count is never greater than 2 */
- if (count > 2) {
- printk(KERN_CRIT "jffs2_flash_writev(): count is %ld\n", count);
+ c->wbuf_ofs, c->wbuf_ofs+c->wbuf_len);
BUG();
}
- invec = 0;
- outvec = 0;
-
- /* Fill writebuffer first, if already in use */
- if (c->wbuf_len) {
- uint32_t invec_ofs = 0;
-
- /* adjust alignment offset */
- if (c->wbuf_len != PAGE_MOD(to)) {
- c->wbuf_len = PAGE_MOD(to);
- /* take care of alignment to next page */
- if (!c->wbuf_len)
- c->wbuf_len = c->wbuf_pagesize;
- }
-
- while(c->wbuf_len < c->wbuf_pagesize) {
- uint32_t thislen;
-
- if (invec == count)
- goto alldone;
-
- thislen = c->wbuf_pagesize - c->wbuf_len;
-
- if (thislen >= invecs[invec].iov_len)
- thislen = invecs[invec].iov_len;
-
- invec_ofs = thislen;
-
- memcpy(c->wbuf + c->wbuf_len, invecs[invec].iov_base, thislen);
- c->wbuf_len += thislen;
- donelen += thislen;
- /* Get next invec, if actual did not fill the buffer */
- if (c->wbuf_len < c->wbuf_pagesize)
- invec++;
- }
-
- /* write buffer is full, flush buffer */
- ret = __jffs2_flush_wbuf(c, NOPAD);
- if (ret) {
- /* the underlying layer has to check wbuf_len to do the cleanup */
- D1(printk(KERN_WARNING "jffs2_flush_wbuf() called from jffs2_flash_writev() failed %d\n", ret));
- /* Retlen zero to make sure our caller doesn't mark the space dirty.
- We've already done everything that's necessary */
- *retlen = 0;
- goto exit;
- }
- outvec_to += donelen;
- c->wbuf_ofs = outvec_to;
-
- /* All invecs done ? */
- if (invec == count)
- goto alldone;
-
- /* Set up the first outvec, containing the remainder of the
- invec we partially used */
- if (invecs[invec].iov_len > invec_ofs) {
- outvecs[0].iov_base = invecs[invec].iov_base+invec_ofs;
- totlen = outvecs[0].iov_len = invecs[invec].iov_len-invec_ofs;
- if (totlen > c->wbuf_pagesize) {
- splitvec = outvec;
- split_ofs = outvecs[0].iov_len - PAGE_MOD(totlen);
- }
- outvec++;
- }
- invec++;
- }
-
- /* OK, now we've flushed the wbuf and the start of the bits
- we have been asked to write, now to write the rest.... */
-
- /* totlen holds the amount of data still to be written */
- old_totlen = totlen;
- for ( ; invec < count; invec++,outvec++ ) {
- outvecs[outvec].iov_base = invecs[invec].iov_base;
- totlen += outvecs[outvec].iov_len = invecs[invec].iov_len;
- if (PAGE_DIV(totlen) != PAGE_DIV(old_totlen)) {
- splitvec = outvec;
- split_ofs = outvecs[outvec].iov_len - PAGE_MOD(totlen);
- old_totlen = totlen;
+ /* adjust alignment offset */
+ if (c->wbuf_len != PAGE_MOD(to)) {
+ c->wbuf_len = PAGE_MOD(to);
+ /* take care of alignment to next page */
+ if (!c->wbuf_len) {
+ c->wbuf_len = c->wbuf_pagesize;
+ ret = __jffs2_flush_wbuf(c, NOPAD);
+ if (ret)
+ goto outerr;
}
}
- /* Now the outvecs array holds all the remaining data to write */
- /* Up to splitvec,split_ofs is to be written immediately. The rest
- goes into the (now-empty) wbuf */
-
- if (splitvec != -1) {
- uint32_t remainder;
-
- remainder = outvecs[splitvec].iov_len - split_ofs;
- outvecs[splitvec].iov_len = split_ofs;
-
- /* We did cross a page boundary, so we write some now */
- if (jffs2_cleanmarker_oob(c))
- ret = c->mtd->writev_ecc(c->mtd, outvecs, splitvec+1, outvec_to, &wbuf_retlen, NULL, c->oobinfo);
- else
- ret = jffs2_flash_direct_writev(c, outvecs, splitvec+1, outvec_to, &wbuf_retlen);
-
- if (ret < 0 || wbuf_retlen != PAGE_DIV(totlen)) {
- /* At this point we have no problem,
- c->wbuf is empty. However refile nextblock to avoid
- writing again to same address.
- */
- struct jffs2_eraseblock *jeb;
+ for (invec = 0; invec < count; invec++) {
+ int vlen = invecs[invec].iov_len;
+ uint8_t *v = invecs[invec].iov_base;
- spin_lock(&c->erase_completion_lock);
+ wbuf_retlen = jffs2_fill_wbuf(c, v, vlen);
- jeb = &c->blocks[outvec_to / c->sector_size];
- jffs2_block_refile(c, jeb, REFILE_ANYWAY);
-
- *retlen = 0;
- spin_unlock(&c->erase_completion_lock);
- goto exit;
+ if (c->wbuf_len == c->wbuf_pagesize) {
+ ret = __jffs2_flush_wbuf(c, NOPAD);
+ if (ret)
+ goto outerr;
}
-
+ vlen -= wbuf_retlen;
+ outvec_to += wbuf_retlen;
donelen += wbuf_retlen;
- c->wbuf_ofs = PAGE_DIV(outvec_to) + PAGE_DIV(totlen);
-
- if (remainder) {
- outvecs[splitvec].iov_base += split_ofs;
- outvecs[splitvec].iov_len = remainder;
- } else {
- splitvec++;
+ v += wbuf_retlen;
+
+ if (vlen >= c->wbuf_pagesize) {
+ ret = c->mtd->write(c->mtd, outvec_to, PAGE_DIV(vlen),
+ &wbuf_retlen, v);
+ if (ret < 0 || wbuf_retlen != PAGE_DIV(vlen))
+ goto outfile;
+
+ vlen -= wbuf_retlen;
+ outvec_to += wbuf_retlen;
+ c->wbuf_ofs = outvec_to;
+ donelen += wbuf_retlen;
+ v += wbuf_retlen;
}
- } else {
- splitvec = 0;
- }
-
- /* Now splitvec points to the start of the bits we have to copy
- into the wbuf */
- wbuf_ptr = c->wbuf;
+ wbuf_retlen = jffs2_fill_wbuf(c, v, vlen);
+ if (c->wbuf_len == c->wbuf_pagesize) {
+ ret = __jffs2_flush_wbuf(c, NOPAD);
+ if (ret)
+ goto outerr;
+ }
- for ( ; splitvec < outvec; splitvec++) {
- /* Don't copy the wbuf into itself */
- if (outvecs[splitvec].iov_base == c->wbuf)
- continue;
- memcpy(wbuf_ptr, outvecs[splitvec].iov_base, outvecs[splitvec].iov_len);
- wbuf_ptr += outvecs[splitvec].iov_len;
- donelen += outvecs[splitvec].iov_len;
+ outvec_to += wbuf_retlen;
+ donelen += wbuf_retlen;
}
- c->wbuf_len = wbuf_ptr - c->wbuf;
- /* If there's a remainder in the wbuf and it's a non-GC write,
- remember that the wbuf affects this ino */
-alldone:
+ /*
+ * If there's a remainder in the wbuf and it's a non-GC write,
+ * remember that the wbuf affects this ino
+ */
*retlen = donelen;
if (jffs2_sum_active()) {
jffs2_wbuf_dirties_inode(c, ino);
ret = 0;
+ up_write(&c->wbuf_sem);
+ return ret;
-exit:
+outfile:
+ /*
+ * At this point we have no problem, c->wbuf is empty. However
+ * refile nextblock to avoid writing again to same address.
+ */
+
+ spin_lock(&c->erase_completion_lock);
+
+ jeb = &c->blocks[outvec_to / c->sector_size];
+ jffs2_block_refile(c, jeb, REFILE_ANYWAY);
+
+ spin_unlock(&c->erase_completion_lock);
+
+outerr:
+ *retlen = 0;
up_write(&c->wbuf_sem);
return ret;
}
projects / linux-2.6 / commitdiff