return retval;
}
+/*
+ * This function is trivial and will be inlined by the compiler.
+ * Having it separates the implementation details of debug
+ * registers from the interface details of ptrace.
+ */
+static unsigned long ptrace_get_debugreg(struct task_struct *child, int n)
+{
+ return child->thread.debugreg[n];
+}
+
+static int ptrace_set_debugreg(struct task_struct *child,
+ int n, unsigned long data)
+{
+ if (unlikely(n == 4 || n == 5))
+ return -EIO;
+
+ if (n < 4 && unlikely(data >= TASK_SIZE - 3))
+ return -EIO;
+
+ if (n == 7) {
+ /*
+ * Sanity-check data. Take one half-byte at once with
+ * check = (val >> (16 + 4*i)) & 0xf. It contains the
+ * R/Wi and LENi bits; bits 0 and 1 are R/Wi, and bits
+ * 2 and 3 are LENi. Given a list of invalid values,
+ * we do mask |= 1 << invalid_value, so that
+ * (mask >> check) & 1 is a correct test for invalid
+ * values.
+ *
+ * R/Wi contains the type of the breakpoint /
+ * watchpoint, LENi contains the length of the watched
+ * data in the watchpoint case.
+ *
+ * The invalid values are:
+ * - LENi == 0x10 (undefined), so mask |= 0x0f00.
+ * - R/Wi == 0x10 (break on I/O reads or writes), so
+ * mask |= 0x4444.
+ * - R/Wi == 0x00 && LENi != 0x00, so we have mask |=
+ * 0x1110.
+ *
+ * Finally, mask = 0x0f00 | 0x4444 | 0x1110 == 0x5f54.
+ *
+ * See the Intel Manual "System Programming Guide",
+ * 15.2.4
+ *
+ * Note that LENi == 0x10 is defined on x86_64 in long
+ * mode (i.e. even for 32-bit userspace software, but
+ * 64-bit kernel), so the x86_64 mask value is 0x5454.
+ * See the AMD manual no. 24593 (AMD64 System Programming)
+ */
+ int i;
+ data &= ~DR_CONTROL_RESERVED;
+ for (i = 0; i < 4; i++)
+ if ((0x5f54 >> ((data >> (16 + 4*i)) & 0xf)) & 1)
+ return -EIO;
+ if (data)
+ set_tsk_thread_flag(child, TIF_DEBUG);
+ else
+ clear_tsk_thread_flag(child, TIF_DEBUG);
+ }
+
+ child->thread.debugreg[n] = data;
+
+ return 0;
+}
+
/*
* Called by kernel/ptrace.c when detaching..
*
addr <= (long) &dummy->u_debugreg[7]){
addr -= (long) &dummy->u_debugreg[0];
addr = addr >> 2;
- tmp = child->thread.debugreg[addr];
+ tmp = ptrace_get_debugreg(child, addr);
}
ret = put_user(tmp, datap);
break;
ret = -EIO;
if(addr >= (long) &dummy->u_debugreg[0] &&
addr <= (long) &dummy->u_debugreg[7]){
-
- if(addr == (long) &dummy->u_debugreg[4]) break;
- if(addr == (long) &dummy->u_debugreg[5]) break;
- if(addr < (long) &dummy->u_debugreg[4] &&
- ((unsigned long) data) >= TASK_SIZE-3) break;
-
- /* Sanity-check data. Take one half-byte at once with
- * check = (val >> (16 + 4*i)) & 0xf. It contains the
- * R/Wi and LENi bits; bits 0 and 1 are R/Wi, and bits
- * 2 and 3 are LENi. Given a list of invalid values,
- * we do mask |= 1 << invalid_value, so that
- * (mask >> check) & 1 is a correct test for invalid
- * values.
- *
- * R/Wi contains the type of the breakpoint /
- * watchpoint, LENi contains the length of the watched
- * data in the watchpoint case.
- *
- * The invalid values are:
- * - LENi == 0x10 (undefined), so mask |= 0x0f00.
- * - R/Wi == 0x10 (break on I/O reads or writes), so
- * mask |= 0x4444.
- * - R/Wi == 0x00 && LENi != 0x00, so we have mask |=
- * 0x1110.
- *
- * Finally, mask = 0x0f00 | 0x4444 | 0x1110 == 0x5f54.
- *
- * See the Intel Manual "System Programming Guide",
- * 15.2.4
- *
- * Note that LENi == 0x10 is defined on x86_64 in long
- * mode (i.e. even for 32-bit userspace software, but
- * 64-bit kernel), so the x86_64 mask value is 0x5454.
- * See the AMD manual no. 24593 (AMD64 System
- * Programming)*/
-
- if(addr == (long) &dummy->u_debugreg[7]) {
- data &= ~DR_CONTROL_RESERVED;
- for(i=0; i<4; i++)
- if ((0x5f54 >> ((data >> (16 + 4*i)) & 0xf)) & 1)
- goto out_tsk;
- if (data)
- set_tsk_thread_flag(child, TIF_DEBUG);
- else
- clear_tsk_thread_flag(child, TIF_DEBUG);
- }
addr -= (long) &dummy->u_debugreg;
addr = addr >> 2;
- child->thread.debugreg[addr] = data;
- ret = 0;
+ ret = ptrace_set_debugreg(child, addr, data);
}
break;
ret = ptrace_request(child, request, addr, data);
break;
}
- out_tsk:
+
return ret;
}