/ {
model = "MPC8313ERDB";
- compatible = "MPC83xx";
+ compatible = "MPC8313ERDB", "MPC831xRDB", "MPC83xxRDB";
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl-i2c";
reg = <3000 100>;
interrupts = <e 8>;
- interrupt-parent = <700>;
+ interrupt-parent = < &ipic >;
dfsrr;
};
compatible = "fsl-i2c";
reg = <3100 100>;
interrupts = <f 8>;
- interrupt-parent = <700>;
+ interrupt-parent = < &ipic >;
dfsrr;
};
compatible = "mpc83xx_spi";
reg = <7000 1000>;
interrupts = <10 8>;
- interrupt-parent = <700>;
+ interrupt-parent = < &ipic >;
mode = <0>;
};
reg = <23000 1000>;
#address-cells = <1>;
#size-cells = <0>;
- interrupt-parent = <700>;
- interrupts = <26 2>;
+ interrupt-parent = < &ipic >;
+ interrupts = <26 8>;
phy_type = "utmi_wide";
};
reg = <24520 20>;
#address-cells = <1>;
#size-cells = <0>;
- linux,phandle = <24520>;
- ethernet-phy@1 {
- linux,phandle = <2452001>;
- interrupt-parent = <700>;
- interrupts = <13 2>;
+ phy1: ethernet-phy@1 {
+ interrupt-parent = < &ipic >;
+ interrupts = <13 8>;
reg = <1>;
device_type = "ethernet-phy";
};
- ethernet-phy@4 {
- linux,phandle = <2452004>;
- interrupt-parent = <700>;
- interrupts = <14 2>;
+ phy4: ethernet-phy@4 {
+ interrupt-parent = < &ipic >;
+ interrupts = <14 8>;
reg = <4>;
device_type = "ethernet-phy";
};
reg = <24000 1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <25 8 24 8 23 8>;
- interrupt-parent = <700>;
- phy-handle = <2452001>;
+ interrupt-parent = < &ipic >;
+ phy-handle = < &phy1 >;
};
ethernet@25000 {
reg = <25000 1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <22 8 21 8 20 8>;
- interrupt-parent = <700>;
- phy-handle = <2452004>;
+ interrupt-parent = < &ipic >;
+ phy-handle = < &phy4 >;
};
serial@4500 {
reg = <4500 100>;
clock-frequency = <0>;
interrupts = <9 8>;
- interrupt-parent = <700>;
+ interrupt-parent = < &ipic >;
};
serial@4600 {
reg = <4600 100>;
clock-frequency = <0>;
interrupts = <a 8>;
- interrupt-parent = <700>;
+ interrupt-parent = < &ipic >;
};
pci@8500 {
interrupt-map = <
/* IDSEL 0x0E -mini PCI */
- 7000 0 0 1 700 12 8
- 7000 0 0 2 700 12 8
- 7000 0 0 3 700 12 8
- 7000 0 0 4 700 12 8
+ 7000 0 0 1 &ipic 12 8
+ 7000 0 0 2 &ipic 12 8
+ 7000 0 0 3 &ipic 12 8
+ 7000 0 0 4 &ipic 12 8
/* IDSEL 0x0F - PCI slot */
- 7800 0 0 1 700 11 8
- 7800 0 0 2 700 12 8
- 7800 0 0 3 700 11 8
- 7800 0 0 4 700 12 8>;
- interrupt-parent = <700>;
+ 7800 0 0 1 &ipic 11 8
+ 7800 0 0 2 &ipic 12 8
+ 7800 0 0 3 &ipic 11 8
+ 7800 0 0 4 &ipic 12 8>;
+ interrupt-parent = < &ipic >;
interrupts = <42 8>;
bus-range = <0 0>;
ranges = <02000000 0 90000000 90000000 0 10000000
compatible = "talitos";
reg = <30000 7000>;
interrupts = <b 8>;
- interrupt-parent = <700>;
+ interrupt-parent = < &ipic >;
/* Rev. 2.2 */
num-channels = <1>;
channel-fifo-len = <18>;
* sense == 8: Level, low assertion
* sense == 2: Edge, high-to-low change
*/
- pic@700 {
- linux,phandle = <700>;
+ ipic: pic@700 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
/ {
model = "MPC8323EMDS";
- compatible = "MPC83xx";
+ compatible = "MPC8323EMDS", "MPC832xMDS", "MPC83xxMDS";
#address-cells = <1>;
#size-cells = <1>;
- linux,phandle = <100>;
cpus {
#cpus = <1>;
#address-cells = <1>;
#size-cells = <0>;
- linux,phandle = <200>;
PowerPC,8323@0 {
device_type = "cpu";
bus-frequency = <0>;
clock-frequency = <0>;
32-bit;
- linux,phandle = <201>;
};
};
memory {
device_type = "memory";
- linux,phandle = <300>;
reg = <00000000 08000000>;
};
compatible = "fsl-i2c";
reg = <3000 100>;
interrupts = <e 8>;
- interrupt-parent = <700>;
+ interrupt-parent = < &ipic >;
dfsrr;
};
reg = <4500 100>;
clock-frequency = <0>;
interrupts = <9 8>;
- interrupt-parent = <700>;
+ interrupt-parent = < &ipic >;
};
serial@4600 {
reg = <4600 100>;
clock-frequency = <0>;
interrupts = <a 8>;
- interrupt-parent = <700>;
+ interrupt-parent = < &ipic >;
};
crypto@30000 {
compatible = "talitos";
reg = <30000 7000>;
interrupts = <b 8>;
- interrupt-parent = <700>;
+ interrupt-parent = < &ipic >;
/* Rev. 2.2 */
num-channels = <1>;
channel-fifo-len = <18>;
};
pci@8500 {
- linux,phandle = <8500>;
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x11 AD17 */
- 8800 0 0 1 700 14 8
- 8800 0 0 2 700 15 8
- 8800 0 0 3 700 16 8
- 8800 0 0 4 700 17 8
+ 8800 0 0 1 &ipic 14 8
+ 8800 0 0 2 &ipic 15 8
+ 8800 0 0 3 &ipic 16 8
+ 8800 0 0 4 &ipic 17 8
/* IDSEL 0x12 AD18 */
- 9000 0 0 1 700 16 8
- 9000 0 0 2 700 17 8
- 9000 0 0 3 700 14 8
- 9000 0 0 4 700 15 8
+ 9000 0 0 1 &ipic 16 8
+ 9000 0 0 2 &ipic 17 8
+ 9000 0 0 3 &ipic 14 8
+ 9000 0 0 4 &ipic 15 8
/* IDSEL 0x13 AD19 */
- 9800 0 0 1 700 17 8
- 9800 0 0 2 700 14 8
- 9800 0 0 3 700 15 8
- 9800 0 0 4 700 16 8
+ 9800 0 0 1 &ipic 17 8
+ 9800 0 0 2 &ipic 14 8
+ 9800 0 0 3 &ipic 15 8
+ 9800 0 0 4 &ipic 16 8
/* IDSEL 0x15 AD21*/
- a800 0 0 1 700 14 8
- a800 0 0 2 700 15 8
- a800 0 0 3 700 16 8
- a800 0 0 4 700 17 8
+ a800 0 0 1 &ipic 14 8
+ a800 0 0 2 &ipic 15 8
+ a800 0 0 3 &ipic 16 8
+ a800 0 0 4 &ipic 17 8
/* IDSEL 0x16 AD22*/
- b000 0 0 1 700 17 8
- b000 0 0 2 700 14 8
- b000 0 0 3 700 15 8
- b000 0 0 4 700 16 8
+ b000 0 0 1 &ipic 17 8
+ b000 0 0 2 &ipic 14 8
+ b000 0 0 3 &ipic 15 8
+ b000 0 0 4 &ipic 16 8
/* IDSEL 0x17 AD23*/
- b800 0 0 1 700 16 8
- b800 0 0 2 700 17 8
- b800 0 0 3 700 14 8
- b800 0 0 4 700 15 8
+ b800 0 0 1 &ipic 16 8
+ b800 0 0 2 &ipic 17 8
+ b800 0 0 3 &ipic 14 8
+ b800 0 0 4 &ipic 15 8
/* IDSEL 0x18 AD24*/
- c000 0 0 1 700 15 8
- c000 0 0 2 700 16 8
- c000 0 0 3 700 17 8
- c000 0 0 4 700 14 8>;
- interrupt-parent = <700>;
+ c000 0 0 1 &ipic 15 8
+ c000 0 0 2 &ipic 16 8
+ c000 0 0 3 &ipic 17 8
+ c000 0 0 4 &ipic 14 8>;
+ interrupt-parent = < &ipic >;
interrupts = <42 8>;
bus-range = <0 0>;
ranges = <02000000 0 a0000000 90000000 0 10000000
device_type = "pci";
};
- pic@700 {
- linux,phandle = <700>;
+ ipic: pic@700 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
device_type = "par_io";
num-ports = <7>;
- ucc_pin@03 {
- linux,phandle = <140003>;
+ pio3: ucc_pin@03 {
pio-map = <
/* port pin dir open_drain assignment has_irq */
3 4 3 0 2 0 /* MDIO */
1 c 1 0 1 0 /* TX_EN */
1 d 2 0 1 0>;/* CRS */
};
- ucc_pin@04 {
- linux,phandle = <140004>;
+ pio4: ucc_pin@04 {
pio-map = <
/* port pin dir open_drain assignment has_irq */
3 1f 2 0 1 0 /* RX_CLK (CLK7) */
compatible = "fsl_spi";
reg = <4c0 40>;
interrupts = <2>;
- interrupt-parent = <80>;
+ interrupt-parent = < &qeic >;
mode = "cpu";
};
compatible = "fsl_spi";
reg = <500 40>;
interrupts = <1>;
- interrupt-parent = <80>;
+ interrupt-parent = < &qeic >;
mode = "cpu";
};
compatible = "qe_udc";
reg = <6c0 40 8B00 100>;
interrupts = <b>;
- interrupt-parent = <80>;
+ interrupt-parent = < &qeic >;
mode = "slave";
};
device-id = <3>;
reg = <2200 200>;
interrupts = <22>;
- interrupt-parent = <80>;
+ interrupt-parent = < &qeic >;
mac-address = [ 00 04 9f 00 23 23 ];
rx-clock = <19>;
tx-clock = <1a>;
- phy-handle = <212003>;
- pio-handle = <140003>;
+ phy-handle = < &phy3 >;
+ pio-handle = < &pio3 >;
};
ucc@3200 {
device-id = <4>;
reg = <3000 200>;
interrupts = <23>;
- interrupt-parent = <80>;
+ interrupt-parent = < &qeic >;
mac-address = [ 00 11 22 33 44 55 ];
rx-clock = <17>;
tx-clock = <18>;
- phy-handle = <212004>;
- pio-handle = <140004>;
+ phy-handle = < &phy4 >;
+ pio-handle = < &pio4 >;
};
mdio@2320 {
device_type = "mdio";
compatible = "ucc_geth_phy";
- ethernet-phy@03 {
- linux,phandle = <212003>;
- interrupt-parent = <700>;
- interrupts = <11 2>;
+ phy3: ethernet-phy@03 {
+ interrupt-parent = < &ipic >;
+ interrupts = <11 8>;
reg = <3>;
device_type = "ethernet-phy";
interface = <3>; //ENET_100_MII
};
- ethernet-phy@04 {
- linux,phandle = <212004>;
- interrupt-parent = <700>;
- interrupts = <12 2>;
+ phy4: ethernet-phy@04 {
+ interrupt-parent = < &ipic >;
+ interrupts = <12 8>;
reg = <4>;
device_type = "ethernet-phy";
interface = <3>;
};
};
- qeic@80 {
- linux,phandle = <80>;
+ qeic: qeic@80 {
interrupt-controller;
device_type = "qeic";
#address-cells = <0>;
built-in;
big-endian;
interrupts = <20 8 21 8>; //high:32 low:33
- interrupt-parent = <700>;
+ interrupt-parent = < &ipic >;
};
};
};
*/
/ {
model = "MPC8349EMITX";
- compatible = "MPC834xMITX";
+ compatible = "MPC8349EMITX", "MPC834xMITX", "MPC83xxMITX";
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl-i2c";
reg = <3000 100>;
interrupts = <e 8>;
- interrupt-parent = <700>;
+ interrupt-parent = < &ipic >;
dfsrr;
};
compatible = "fsl-i2c";
reg = <3100 100>;
interrupts = <f 8>;
- interrupt-parent = <700>;
+ interrupt-parent = < &ipic >;
dfsrr;
};
compatible = "mpc83xx_spi";
reg = <7000 1000>;
interrupts = <10 8>;
- interrupt-parent = <700>;
+ interrupt-parent = < &ipic >;
mode = <0>;
};
reg = <22000 1000>;
#address-cells = <1>;
#size-cells = <0>;
- interrupt-parent = <700>;
- interrupts = <27 2>;
+ interrupt-parent = < &ipic >;
+ interrupts = <27 8>;
phy_type = "ulpi";
port1;
};
reg = <23000 1000>;
#address-cells = <1>;
#size-cells = <0>;
- interrupt-parent = <700>;
- interrupts = <26 2>;
+ interrupt-parent = < &ipic >;
+ interrupts = <26 8>;
phy_type = "ulpi";
};
reg = <24520 20>;
#address-cells = <1>;
#size-cells = <0>;
- linux,phandle = <24520>;
/* Vitesse 8201 */
- ethernet-phy@1c {
- linux,phandle = <245201c>;
- interrupt-parent = <700>;
- interrupts = <12 2>;
+ phy1c: ethernet-phy@1c {
+ interrupt-parent = < &ipic >;
+ interrupts = <12 8>;
reg = <1c>;
device_type = "ethernet-phy";
};
/* Vitesse 7385 */
- ethernet-phy@1f {
- linux,phandle = <245201f>;
- interrupt-parent = <700>;
- interrupts = <12 2>;
+ phy1f: ethernet-phy@1f {
+ interrupt-parent = < &ipic >;
+ interrupts = <12 8>;
reg = <1f>;
device_type = "ethernet-phy";
};
address = [ 00 00 00 00 00 00 ];
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <20 8 21 8 22 8>;
- interrupt-parent = <700>;
- phy-handle = <245201c>;
+ interrupt-parent = < &ipic >;
+ phy-handle = < &phy1c >;
};
ethernet@25000 {
address = [ 00 00 00 00 00 00 ];
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <23 8 24 8 25 8>;
- interrupt-parent = <700>;
- phy-handle = <245201f>;
+ interrupt-parent = < &ipic >;
+ phy-handle = < &phy1f >;
};
serial@4500 {
reg = <4500 100>;
clock-frequency = <0>; // from bootloader
interrupts = <9 8>;
- interrupt-parent = <700>;
+ interrupt-parent = < &ipic >;
};
serial@4600 {
reg = <4600 100>;
clock-frequency = <0>; // from bootloader
interrupts = <a 8>;
- interrupt-parent = <700>;
+ interrupt-parent = < &ipic >;
};
pci@8500 {
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x10 - SATA */
- 8000 0 0 1 700 16 8 /* SATA_INTA */
+ 8000 0 0 1 &ipic 16 8 /* SATA_INTA */
>;
- interrupt-parent = <700>;
+ interrupt-parent = < &ipic >;
interrupts = <42 8>;
bus-range = <0 0>;
ranges = <42000000 0 80000000 80000000 0 10000000
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0E - MiniPCI Slot */
- 7000 0 0 1 700 15 8 /* PCI_INTA */
+ 7000 0 0 1 &ipic 15 8 /* PCI_INTA */
/* IDSEL 0x0F - PCI Slot */
- 7800 0 0 1 700 14 8 /* PCI_INTA */
- 7800 0 0 2 700 15 8 /* PCI_INTB */
+ 7800 0 0 1 &ipic 14 8 /* PCI_INTA */
+ 7800 0 0 2 &ipic 15 8 /* PCI_INTB */
>;
- interrupt-parent = <700>;
+ interrupt-parent = < &ipic >;
interrupts = <43 8>;
bus-range = <1 1>;
ranges = <42000000 0 a0000000 a0000000 0 10000000
compatible = "talitos";
reg = <30000 10000>;
interrupts = <b 8>;
- interrupt-parent = <700>;
+ interrupt-parent = < &ipic >;
num-channels = <4>;
channel-fifo-len = <18>;
exec-units-mask = <0000007e>;
descriptor-types-mask = <01010ebf>;
};
- pic@700 {
- linux,phandle = <700>;
+ ipic: pic@700 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
*/
/ {
model = "MPC8349EMITXGP";
- compatible = "MPC834xMITXGP";
+ compatible = "MPC8349EMITXGP", "MPC834xMITX", "MPC83xxMITX";
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl-i2c";
reg = <3000 100>;
interrupts = <e 8>;
- interrupt-parent = <700>;
+ interrupt-parent = < &ipic >;
dfsrr;
};
compatible = "fsl-i2c";
reg = <3100 100>;
interrupts = <f 8>;
- interrupt-parent = <700>;
+ interrupt-parent = < &ipic >;
dfsrr;
};
compatible = "mpc83xx_spi";
reg = <7000 1000>;
interrupts = <10 8>;
- interrupt-parent = <700>;
+ interrupt-parent = < &ipic >;
mode = <0>;
};
reg = <23000 1000>;
#address-cells = <1>;
#size-cells = <0>;
- interrupt-parent = <700>;
- interrupts = <26 2>;
+ interrupt-parent = < &ipic >;
+ interrupts = <26 8>;
dr_mode = "otg";
phy_type = "ulpi";
};
reg = <24520 20>;
#address-cells = <1>;
#size-cells = <0>;
- linux,phandle = <24520>;
/* Vitesse 8201 */
- ethernet-phy@1c {
- linux,phandle = <245201c>;
- interrupt-parent = <700>;
- interrupts = <12 2>;
+ phy1c: ethernet-phy@1c {
+ interrupt-parent = < &ipic >;
+ interrupts = <12 8>;
reg = <1c>;
device_type = "ethernet-phy";
};
reg = <24000 1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <20 8 21 8 22 8>;
- interrupt-parent = <700>;
- phy-handle = <245201c>;
+ interrupt-parent = < &ipic >;
+ phy-handle = < &phy1c >;
};
serial@4500 {
reg = <4500 100>;
clock-frequency = <0>; // from bootloader
interrupts = <9 8>;
- interrupt-parent = <700>;
+ interrupt-parent = < &ipic >;
};
serial@4600 {
reg = <4600 100>;
clock-frequency = <0>; // from bootloader
interrupts = <a 8>;
- interrupt-parent = <700>;
+ interrupt-parent = < &ipic >;
};
pci@8600 {
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0F - PCI Slot */
- 7800 0 0 1 700 14 8 /* PCI_INTA */
- 7800 0 0 2 700 15 8 /* PCI_INTB */
+ 7800 0 0 1 &ipic 14 8 /* PCI_INTA */
+ 7800 0 0 2 &ipic 15 8 /* PCI_INTB */
>;
- interrupt-parent = <700>;
+ interrupt-parent = < &ipic >;
interrupts = <43 8>;
bus-range = <1 1>;
ranges = <42000000 0 a0000000 a0000000 0 10000000
compatible = "talitos";
reg = <30000 10000>;
interrupts = <b 8>;
- interrupt-parent = <700>;
+ interrupt-parent = < &ipic >;
num-channels = <4>;
channel-fifo-len = <18>;
exec-units-mask = <0000007e>;
descriptor-types-mask = <01010ebf>;
};
- pic@700 {
- linux,phandle = <700>;
+ ipic: pic@700 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
/ {
model = "MPC8349EMDS";
- compatible = "MPC834xMDS";
+ compatible = "MPC8349EMDS", "MPC834xMDS", "MPC83xxMDS";
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl-i2c";
reg = <3000 100>;
interrupts = <e 8>;
- interrupt-parent = <700>;
+ interrupt-parent = < &ipic >;
dfsrr;
};
compatible = "fsl-i2c";
reg = <3100 100>;
interrupts = <f 8>;
- interrupt-parent = <700>;
+ interrupt-parent = < &ipic >;
dfsrr;
};
compatible = "mpc83xx_spi";
reg = <7000 1000>;
interrupts = <10 8>;
- interrupt-parent = <700>;
+ interrupt-parent = < &ipic >;
mode = <0>;
};
reg = <22000 1000>;
#address-cells = <1>;
#size-cells = <0>;
- interrupt-parent = <700>;
- interrupts = <27 2>;
+ interrupt-parent = < &ipic >;
+ interrupts = <27 8>;
phy_type = "ulpi";
port1;
};
reg = <23000 1000>;
#address-cells = <1>;
#size-cells = <0>;
- interrupt-parent = <700>;
- interrupts = <26 2>;
+ interrupt-parent = < &ipic >;
+ interrupts = <26 8>;
dr_mode = "otg";
phy_type = "ulpi";
};
reg = <24520 20>;
#address-cells = <1>;
#size-cells = <0>;
- linux,phandle = <24520>;
- ethernet-phy@0 {
- linux,phandle = <2452000>;
- interrupt-parent = <700>;
- interrupts = <11 2>;
+ phy0: ethernet-phy@0 {
+ interrupt-parent = < &ipic >;
+ interrupts = <11 8>;
reg = <0>;
device_type = "ethernet-phy";
};
- ethernet-phy@1 {
- linux,phandle = <2452001>;
- interrupt-parent = <700>;
- interrupts = <12 2>;
+ phy1: ethernet-phy@1 {
+ interrupt-parent = < &ipic >;
+ interrupts = <12 8>;
reg = <1>;
device_type = "ethernet-phy";
};
address = [ 00 00 00 00 00 00 ];
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <20 8 21 8 22 8>;
- interrupt-parent = <700>;
- phy-handle = <2452000>;
+ interrupt-parent = < &ipic >;
+ phy-handle = < &phy0 >;
};
ethernet@25000 {
address = [ 00 00 00 00 00 00 ];
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <23 8 24 8 25 8>;
- interrupt-parent = <700>;
- phy-handle = <2452001>;
+ interrupt-parent = < &ipic >;
+ phy-handle = < &phy1 >;
};
serial@4500 {
reg = <4500 100>;
clock-frequency = <0>;
interrupts = <9 8>;
- interrupt-parent = <700>;
+ interrupt-parent = < &ipic >;
};
serial@4600 {
reg = <4600 100>;
clock-frequency = <0>;
interrupts = <a 8>;
- interrupt-parent = <700>;
+ interrupt-parent = < &ipic >;
};
pci@8500 {
interrupt-map = <
/* IDSEL 0x11 */
- 8800 0 0 1 700 14 8
- 8800 0 0 2 700 15 8
- 8800 0 0 3 700 16 8
- 8800 0 0 4 700 17 8
+ 8800 0 0 1 &ipic 14 8
+ 8800 0 0 2 &ipic 15 8
+ 8800 0 0 3 &ipic 16 8
+ 8800 0 0 4 &ipic 17 8
/* IDSEL 0x12 */
- 9000 0 0 1 700 16 8
- 9000 0 0 2 700 17 8
- 9000 0 0 3 700 14 8
- 9000 0 0 4 700 15 8
+ 9000 0 0 1 &ipic 16 8
+ 9000 0 0 2 &ipic 17 8
+ 9000 0 0 3 &ipic 14 8
+ 9000 0 0 4 &ipic 15 8
/* IDSEL 0x13 */
- 9800 0 0 1 700 17 8
- 9800 0 0 2 700 14 8
- 9800 0 0 3 700 15 8
- 9800 0 0 4 700 16 8
+ 9800 0 0 1 &ipic 17 8
+ 9800 0 0 2 &ipic 14 8
+ 9800 0 0 3 &ipic 15 8
+ 9800 0 0 4 &ipic 16 8
/* IDSEL 0x15 */
- a800 0 0 1 700 14 8
- a800 0 0 2 700 15 8
- a800 0 0 3 700 16 8
- a800 0 0 4 700 17 8
+ a800 0 0 1 &ipic 14 8
+ a800 0 0 2 &ipic 15 8
+ a800 0 0 3 &ipic 16 8
+ a800 0 0 4 &ipic 17 8
/* IDSEL 0x16 */
- b000 0 0 1 700 17 8
- b000 0 0 2 700 14 8
- b000 0 0 3 700 15 8
- b000 0 0 4 700 16 8
+ b000 0 0 1 &ipic 17 8
+ b000 0 0 2 &ipic 14 8
+ b000 0 0 3 &ipic 15 8
+ b000 0 0 4 &ipic 16 8
/* IDSEL 0x17 */
- b800 0 0 1 700 16 8
- b800 0 0 2 700 17 8
- b800 0 0 3 700 14 8
- b800 0 0 4 700 15 8
+ b800 0 0 1 &ipic 16 8
+ b800 0 0 2 &ipic 17 8
+ b800 0 0 3 &ipic 14 8
+ b800 0 0 4 &ipic 15 8
/* IDSEL 0x18 */
- c000 0 0 1 700 15 8
- c000 0 0 2 700 16 8
- c000 0 0 3 700 17 8
- c000 0 0 4 700 14 8>;
- interrupt-parent = <700>;
+ c000 0 0 1 &ipic 15 8
+ c000 0 0 2 &ipic 16 8
+ c000 0 0 3 &ipic 17 8
+ c000 0 0 4 &ipic 14 8>;
+ interrupt-parent = < &ipic >;
interrupts = <42 8>;
bus-range = <0 0>;
ranges = <02000000 0 a0000000 a0000000 0 10000000
interrupt-map = <
/* IDSEL 0x11 */
- 8800 0 0 1 700 14 8
- 8800 0 0 2 700 15 8
- 8800 0 0 3 700 16 8
- 8800 0 0 4 700 17 8
+ 8800 0 0 1 &ipic 14 8
+ 8800 0 0 2 &ipic 15 8
+ 8800 0 0 3 &ipic 16 8
+ 8800 0 0 4 &ipic 17 8
/* IDSEL 0x12 */
- 9000 0 0 1 700 16 8
- 9000 0 0 2 700 17 8
- 9000 0 0 3 700 14 8
- 9000 0 0 4 700 15 8
+ 9000 0 0 1 &ipic 16 8
+ 9000 0 0 2 &ipic 17 8
+ 9000 0 0 3 &ipic 14 8
+ 9000 0 0 4 &ipic 15 8
/* IDSEL 0x13 */
- 9800 0 0 1 700 17 8
- 9800 0 0 2 700 14 8
- 9800 0 0 3 700 15 8
- 9800 0 0 4 700 16 8
+ 9800 0 0 1 &ipic 17 8
+ 9800 0 0 2 &ipic 14 8
+ 9800 0 0 3 &ipic 15 8
+ 9800 0 0 4 &ipic 16 8
/* IDSEL 0x15 */
- a800 0 0 1 700 14 8
- a800 0 0 2 700 15 8
- a800 0 0 3 700 16 8
- a800 0 0 4 700 17 8
+ a800 0 0 1 &ipic 14 8
+ a800 0 0 2 &ipic 15 8
+ a800 0 0 3 &ipic 16 8
+ a800 0 0 4 &ipic 17 8
/* IDSEL 0x16 */
- b000 0 0 1 700 17 8
- b000 0 0 2 700 14 8
- b000 0 0 3 700 15 8
- b000 0 0 4 700 16 8
+ b000 0 0 1 &ipic 17 8
+ b000 0 0 2 &ipic 14 8
+ b000 0 0 3 &ipic 15 8
+ b000 0 0 4 &ipic 16 8
/* IDSEL 0x17 */
- b800 0 0 1 700 16 8
- b800 0 0 2 700 17 8
- b800 0 0 3 700 14 8
- b800 0 0 4 700 15 8
+ b800 0 0 1 &ipic 16 8
+ b800 0 0 2 &ipic 17 8
+ b800 0 0 3 &ipic 14 8
+ b800 0 0 4 &ipic 15 8
/* IDSEL 0x18 */
- c000 0 0 1 700 15 8
- c000 0 0 2 700 16 8
- c000 0 0 3 700 17 8
- c000 0 0 4 700 14 8>;
- interrupt-parent = <700>;
+ c000 0 0 1 &ipic 15 8
+ c000 0 0 2 &ipic 16 8
+ c000 0 0 3 &ipic 17 8
+ c000 0 0 4 &ipic 14 8>;
+ interrupt-parent = < &ipic >;
interrupts = <42 8>;
bus-range = <0 0>;
ranges = <02000000 0 b0000000 b0000000 0 10000000
compatible = "talitos";
reg = <30000 10000>;
interrupts = <b 8>;
- interrupt-parent = <700>;
+ interrupt-parent = < &ipic >;
num-channels = <4>;
channel-fifo-len = <18>;
exec-units-mask = <0000007e>;
* sense == 8: Level, low assertion
* sense == 2: Edge, high-to-low change
*/
- pic@700 {
- linux,phandle = <700>;
+ ipic: pic@700 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
*/
/ {
- model = "MPC8360EPB";
- compatible = "MPC83xx";
+ model = "MPC8360MDS";
+ compatible = "MPC8360EMDS", "MPC836xMDS", "MPC83xxMDS";
#address-cells = <1>;
#size-cells = <1>;
- linux,phandle = <100>;
cpus {
#cpus = <1>;
#address-cells = <1>;
#size-cells = <0>;
- linux,phandle = <200>;
PowerPC,8360@0 {
device_type = "cpu";
bus-frequency = <FBC5200>;
clock-frequency = <1F78A400>;
32-bit;
- linux,phandle = <201>;
};
};
memory {
device_type = "memory";
- linux,phandle = <300>;
reg = <00000000 10000000>;
};
compatible = "fsl-i2c";
reg = <3000 100>;
interrupts = <e 8>;
- interrupt-parent = <700>;
+ interrupt-parent = < &ipic >;
dfsrr;
};
compatible = "fsl-i2c";
reg = <3100 100>;
interrupts = <f 8>;
- interrupt-parent = <700>;
+ interrupt-parent = < &ipic >;
dfsrr;
};
reg = <4500 100>;
clock-frequency = <FBC5200>;
interrupts = <9 8>;
- interrupt-parent = <700>;
+ interrupt-parent = < &ipic >;
};
serial@4600 {
reg = <4600 100>;
clock-frequency = <FBC5200>;
interrupts = <a 8>;
- interrupt-parent = <700>;
+ interrupt-parent = < &ipic >;
};
crypto@30000 {
compatible = "talitos";
reg = <30000 10000>;
interrupts = <b 8>;
- interrupt-parent = <700>;
+ interrupt-parent = < &ipic >;
num-channels = <4>;
channel-fifo-len = <18>;
exec-units-mask = <0000007e>;
};
pci@8500 {
- linux,phandle = <8500>;
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x11 AD17 */
- 8800 0 0 1 700 14 8
- 8800 0 0 2 700 15 8
- 8800 0 0 3 700 16 8
- 8800 0 0 4 700 17 8
+ 8800 0 0 1 &ipic 14 8
+ 8800 0 0 2 &ipic 15 8
+ 8800 0 0 3 &ipic 16 8
+ 8800 0 0 4 &ipic 17 8
/* IDSEL 0x12 AD18 */
- 9000 0 0 1 700 16 8
- 9000 0 0 2 700 17 8
- 9000 0 0 3 700 14 8
- 9000 0 0 4 700 15 8
+ 9000 0 0 1 &ipic 16 8
+ 9000 0 0 2 &ipic 17 8
+ 9000 0 0 3 &ipic 14 8
+ 9000 0 0 4 &ipic 15 8
/* IDSEL 0x13 AD19 */
- 9800 0 0 1 700 17 8
- 9800 0 0 2 700 14 8
- 9800 0 0 3 700 15 8
- 9800 0 0 4 700 16 8
+ 9800 0 0 1 &ipic 17 8
+ 9800 0 0 2 &ipic 14 8
+ 9800 0 0 3 &ipic 15 8
+ 9800 0 0 4 &ipic 16 8
/* IDSEL 0x15 AD21*/
- a800 0 0 1 700 14 8
- a800 0 0 2 700 15 8
- a800 0 0 3 700 16 8
- a800 0 0 4 700 17 8
+ a800 0 0 1 &ipic 14 8
+ a800 0 0 2 &ipic 15 8
+ a800 0 0 3 &ipic 16 8
+ a800 0 0 4 &ipic 17 8
/* IDSEL 0x16 AD22*/
- b000 0 0 1 700 17 8
- b000 0 0 2 700 14 8
- b000 0 0 3 700 15 8
- b000 0 0 4 700 16 8
+ b000 0 0 1 &ipic 17 8
+ b000 0 0 2 &ipic 14 8
+ b000 0 0 3 &ipic 15 8
+ b000 0 0 4 &ipic 16 8
/* IDSEL 0x17 AD23*/
- b800 0 0 1 700 16 8
- b800 0 0 2 700 17 8
- b800 0 0 3 700 14 8
- b800 0 0 4 700 15 8
+ b800 0 0 1 &ipic 16 8
+ b800 0 0 2 &ipic 17 8
+ b800 0 0 3 &ipic 14 8
+ b800 0 0 4 &ipic 15 8
/* IDSEL 0x18 AD24*/
- c000 0 0 1 700 15 8
- c000 0 0 2 700 16 8
- c000 0 0 3 700 17 8
- c000 0 0 4 700 14 8>;
- interrupt-parent = <700>;
+ c000 0 0 1 &ipic 15 8
+ c000 0 0 2 &ipic 16 8
+ c000 0 0 3 &ipic 17 8
+ c000 0 0 4 &ipic 14 8>;
+ interrupt-parent = < &ipic >;
interrupts = <42 8>;
bus-range = <0 0>;
ranges = <02000000 0 a0000000 a0000000 0 10000000
device_type = "pci";
};
- pic@700 {
- linux,phandle = <700>;
+ ipic: pic@700 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
device_type = "par_io";
num-ports = <7>;
- ucc_pin@01 {
- linux,phandle = <140001>;
+ pio1: ucc_pin@01 {
pio-map = <
/* port pin dir open_drain assignment has_irq */
0 3 1 0 1 0 /* TxD0 */
2 9 1 0 3 0 /* GTX_CLK - CLK10 */
2 8 2 0 1 0>; /* GTX125 - CLK9 */
};
- ucc_pin@02 {
- linux,phandle = <140002>;
+ pio2: ucc_pin@02 {
pio-map = <
/* port pin dir open_drain assignment has_irq */
0 11 1 0 1 0 /* TxD0 */
compatible = "fsl_spi";
reg = <4c0 40>;
interrupts = <2>;
- interrupt-parent = <80>;
+ interrupt-parent = < &qeic >;
mode = "cpu";
};
compatible = "fsl_spi";
reg = <500 40>;
interrupts = <1>;
- interrupt-parent = <80>;
+ interrupt-parent = < &qeic >;
mode = "cpu";
};
compatible = "qe_udc";
reg = <6c0 40 8B00 100>;
interrupts = <b>;
- interrupt-parent = <80>;
+ interrupt-parent = < &qeic >;
mode = "slave";
};
device-id = <1>;
reg = <2000 200>;
interrupts = <20>;
- interrupt-parent = <80>;
+ interrupt-parent = < &qeic >;
mac-address = [ 00 04 9f 00 23 23 ];
rx-clock = <0>;
tx-clock = <19>;
- phy-handle = <212000>;
- pio-handle = <140001>;
+ phy-handle = < &phy0 >;
+ pio-handle = < &pio1 >;
};
ucc@3000 {
device-id = <2>;
reg = <3000 200>;
interrupts = <21>;
- interrupt-parent = <80>;
+ interrupt-parent = < &qeic >;
mac-address = [ 00 11 22 33 44 55 ];
rx-clock = <0>;
tx-clock = <14>;
- phy-handle = <212001>;
- pio-handle = <140002>;
+ phy-handle = < &phy1 >;
+ pio-handle = < &pio2 >;
};
mdio@2120 {
device_type = "mdio";
compatible = "ucc_geth_phy";
- ethernet-phy@00 {
- linux,phandle = <212000>;
- interrupt-parent = <700>;
- interrupts = <11 2>;
+ phy0: ethernet-phy@00 {
+ interrupt-parent = < &ipic >;
+ interrupts = <11 8>;
reg = <0>;
device_type = "ethernet-phy";
interface = <6>; //ENET_1000_GMII
};
- ethernet-phy@01 {
- linux,phandle = <212001>;
- interrupt-parent = <700>;
- interrupts = <12 2>;
+ phy1: ethernet-phy@01 {
+ interrupt-parent = < &ipic >;
+ interrupts = <12 8>;
reg = <1>;
device_type = "ethernet-phy";
interface = <6>;
};
};
- qeic@80 {
- linux,phandle = <80>;
+ qeic: qeic@80 {
interrupt-controller;
device_type = "qeic";
#address-cells = <0>;
built-in;
big-endian;
interrupts = <20 8 21 8>; //high:32 low:33
- interrupt-parent = <700>;
+ interrupt-parent = < &ipic >;
};
};
projects / linux-2.6 / commitdiff