/*
* hfc_usb.c
*
- * $Id: hfc_usb.c,v 2.3.2.13 2006/02/17 17:17:22 mbachem Exp $
+ * $Id: hfc_usb.c,v 2.3.2.20 2007/08/20 14:07:54 mbachem Exp $
*
* modular HiSax ISDN driver for Colognechip HFC-S USB chip
*
- * Authors : Peter Sprenger (sprenger@moving-bytes.de)
- * Martin Bachem (info@colognechip.com)
+ * Authors : Peter Sprenger (sprenger@moving-bytes.de)
+ * Martin Bachem (m.bachem@gmx.de, info@colognechip.com)
*
* based on the first hfc_usb driver of
* Werner Cornelius (werner@isdn-development.de)
#include <linux/kernel_stat.h>
#include <linux/usb.h>
#include <linux/kernel.h>
+#include <linux/smp_lock.h>
+#include <linux/sched.h>
+#include <linux/moduleparam.h>
#include "hisax.h"
#include "hisax_if.h"
#include "hfc_usb.h"
static const char *hfcusb_revision =
- "$Revision: 2.3.2.13 $ $Date: 2006/02/17 17:17:22 $ ";
+ "$Revision: 2.3.2.20 $ $Date: 2007/08/20 14:07:54 $ ";
/* Hisax debug support
-* use "modprobe debug=x" where x is bitfield of USB_DBG & ISDN_DBG
+* debug flags defined in hfc_usb.h as HFCUSB_DBG_[*]
*/
-#ifdef CONFIG_HISAX_DEBUG
-#include <linux/moduleparam.h>
#define __debug_variable hfc_debug
#include "hisax_debug.h"
static u_int debug;
module_param(debug, uint, 0);
static int hfc_debug;
-#endif
+
/* private vendor specific data */
typedef struct {
char *vend_name; // device name
} hfcsusb_vdata;
-/****************************************/
-/* data defining the devices to be used */
-/****************************************/
+/* VID/PID device list */
static struct usb_device_id hfcusb_idtab[] = {
{
USB_DEVICE(0x0959, 0x2bd0),
.driver_info = (unsigned long) &((hfcsusb_vdata)
{LED_SCHEME1, {4, 0, 2, 1},
"Stollmann USB TA"}),
- },
+ },
{
USB_DEVICE(0x0742, 0x2009),
.driver_info = (unsigned long) &((hfcsusb_vdata)
{LED_SCHEME1, {4, 0, 2, 1},
"Aceex USB ISDN TA"}),
- },
+ },
{
USB_DEVICE(0x0742, 0x200A),
.driver_info = (unsigned long) &((hfcsusb_vdata)
{LED_SCHEME1, {4, 0, 2, 1},
"OEM USB ISDN TA"}),
- },
+ },
{
USB_DEVICE(0x08e3, 0x0301),
.driver_info = (unsigned long) &((hfcsusb_vdata)
{LED_SCHEME1, {2, 0, 1, 4},
"Olitec USB RNIS"}),
- },
+ },
{
USB_DEVICE(0x07fa, 0x0846),
.driver_info = (unsigned long) &((hfcsusb_vdata)
{LED_SCHEME1, {0x80, -64, -32, -16},
"Bewan Modem RNIS USB"}),
- },
+ },
{
USB_DEVICE(0x07fa, 0x0847),
.driver_info = (unsigned long) &((hfcsusb_vdata)
{LED_SCHEME1, {0x80, -64, -32, -16},
"Djinn Numeris USB"}),
- },
+ },
{
USB_DEVICE(0x07b0, 0x0006),
.driver_info = (unsigned long) &((hfcsusb_vdata)
{LED_SCHEME1, {0x80, -64, -32, -16},
"Twister ISDN TA"}),
- },
+ },
{ }
};
-/***************************************************************/
/* structure defining input+output fifos (interrupt/bulk mode) */
-/***************************************************************/
struct usb_fifo; /* forward definition */
typedef struct iso_urb_struct {
struct urb *purb;
struct usb_fifo *owner_fifo; /* pointer to owner fifo */
} iso_urb_struct;
-
struct hfcusb_data; /* forward definition */
+
typedef struct usb_fifo {
int fifonum; /* fifo index attached to this structure */
int active; /* fifo is currently active */
struct hisax_if *hif; /* hisax interface */
int delete_flg; /* only delete skbuff once */
int last_urblen; /* remember length of last packet */
-
} usb_fifo;
-/*********************************************/
/* structure holding all data for one device */
-/*********************************************/
typedef struct hfcusb_data {
/* HiSax Interface for loadable Layer1 drivers */
- struct hisax_d_if d_if; /* see hisax_if.h */
+ struct hisax_d_if d_if; /* see hisax_if.h */
struct hisax_b_if b_if[2]; /* see hisax_if.h */
int protocol;
int if_used; /* used interface number */
int alt_used; /* used alternate config */
int ctrl_paksize; /* control pipe packet size */
- int ctrl_in_pipe, ctrl_out_pipe; /* handles for control pipe */
+ int ctrl_in_pipe, /* handles for control pipe */
+ ctrl_out_pipe;
int cfg_used; /* configuration index used */
int vend_idx; /* vendor found */
int b_mode[2]; /* B-channel mode */
int l1_activated; /* layer 1 activated */
- int disc_flag; /* 'true' if device was disonnected to avoid some USB actions */
+ int disc_flag; /* TRUE if device was disonnected to avoid some USB actions */
int packet_size, iso_packet_size;
/* control pipe background handling */
static void collect_rx_frame(usb_fifo * fifo, __u8 * data, int len,
int finish);
-
static inline const char *
symbolic(struct hfcusb_symbolic_list list[], const int num)
{
return "<unknown ERROR>";
}
-
-/******************************************************/
-/* start next background transfer for control channel */
-/******************************************************/
static void
ctrl_start_transfer(hfcusb_data * hfc)
{
}
} /* ctrl_start_transfer */
-/************************************/
-/* queue a control transfer request */
-/* return 0 on success. */
-/************************************/
static int
queue_control_request(hfcusb_data * hfc, __u8 reg, __u8 val, int action)
{
if (++hfc->ctrl_cnt == 1)
ctrl_start_transfer(hfc);
return (0);
-} /* queue_control_request */
-
-static int
-control_action_handler(hfcusb_data * hfc, int reg, int val, int action)
-{
- if (!action)
- return (1); /* no action defined */
- return (0);
}
-/***************************************************************/
-/* control completion routine handling background control cmds */
-/***************************************************************/
static void
ctrl_complete(struct urb *urb)
{
urb->dev = hfc->dev;
if (hfc->ctrl_cnt) {
buf = &hfc->ctrl_buff[hfc->ctrl_out_idx];
- control_action_handler(hfc, buf->hfc_reg, buf->reg_val,
- buf->action);
-
hfc->ctrl_cnt--; /* decrement actual count */
if (++hfc->ctrl_out_idx >= HFC_CTRL_BUFSIZE)
hfc->ctrl_out_idx = 0; /* pointer wrap */
}
} /* ctrl_complete */
-/***************************************************/
/* write led data to auxport & invert if necessary */
-/***************************************************/
static void
write_led(hfcusb_data * hfc, __u8 led_state)
{
}
}
-/**************************/
-/* handle LED bits */
-/**************************/
static void
set_led_bit(hfcusb_data * hfc, signed short led_bits, int unset)
{
}
}
-/**************************/
-/* handle LED requests */
-/**************************/
+/* handle LED requests */
static void
handle_led(hfcusb_data * hfc, int event)
{
switch (event) {
case LED_POWER_ON:
- set_led_bit(hfc, driver_info->led_bits[0],
- 0);
- set_led_bit(hfc, driver_info->led_bits[1],
- 1);
- set_led_bit(hfc, driver_info->led_bits[2],
- 1);
- set_led_bit(hfc, driver_info->led_bits[3],
- 1);
+ set_led_bit(hfc, driver_info->led_bits[0], 0);
+ set_led_bit(hfc, driver_info->led_bits[1], 1);
+ set_led_bit(hfc, driver_info->led_bits[2], 1);
+ set_led_bit(hfc, driver_info->led_bits[3], 1);
break;
- case LED_POWER_OFF: /* no Power off handling */
+ case LED_POWER_OFF:
+ set_led_bit(hfc, driver_info->led_bits[0], 1);
+ set_led_bit(hfc, driver_info->led_bits[1], 1);
+ set_led_bit(hfc, driver_info->led_bits[2], 1);
+ set_led_bit(hfc, driver_info->led_bits[3], 1);
break;
case LED_S0_ON:
- set_led_bit(hfc, driver_info->led_bits[1],
- 0);
+ set_led_bit(hfc, driver_info->led_bits[1], 0);
break;
case LED_S0_OFF:
- set_led_bit(hfc, driver_info->led_bits[1],
- 1);
+ set_led_bit(hfc, driver_info->led_bits[1], 1);
break;
case LED_B1_ON:
- set_led_bit(hfc, driver_info->led_bits[2],
- 0);
+ set_led_bit(hfc, driver_info->led_bits[2], 0);
break;
case LED_B1_OFF:
- set_led_bit(hfc, driver_info->led_bits[2],
- 1);
+ set_led_bit(hfc, driver_info->led_bits[2], 1);
break;
case LED_B2_ON:
- set_led_bit(hfc, driver_info->led_bits[3],
- 0);
+ set_led_bit(hfc, driver_info->led_bits[3], 0);
break;
case LED_B2_OFF:
- set_led_bit(hfc, driver_info->led_bits[3],
- 1);
+ set_led_bit(hfc, driver_info->led_bits[3], 1);
break;
}
write_led(hfc, hfc->led_state);
}
-/********************************/
-/* called when timer t3 expires */
-/********************************/
+/* ISDN l1 timer T3 expires */
static void
l1_timer_expire_t3(hfcusb_data * hfc)
{
hfc->d_if.ifc.l1l2(&hfc->d_if.ifc, PH_DEACTIVATE | INDICATION,
NULL);
-#ifdef CONFIG_HISAX_DEBUG
- DBG(ISDN_DBG,
+
+ DBG(HFCUSB_DBG_STATES,
"HFC-S USB: PH_DEACTIVATE | INDICATION sent (T3 expire)");
-#endif
- hfc->l1_activated = false;
+
+ hfc->l1_activated = 0;
handle_led(hfc, LED_S0_OFF);
/* deactivate : */
queue_control_request(hfc, HFCUSB_STATES, 0x10, 1);
queue_control_request(hfc, HFCUSB_STATES, 3, 1);
}
-/********************************/
-/* called when timer t4 expires */
-/********************************/
+/* ISDN l1 timer T4 expires */
static void
l1_timer_expire_t4(hfcusb_data * hfc)
{
hfc->d_if.ifc.l1l2(&hfc->d_if.ifc, PH_DEACTIVATE | INDICATION,
NULL);
-#ifdef CONFIG_HISAX_DEBUG
- DBG(ISDN_DBG,
+
+ DBG(HFCUSB_DBG_STATES,
"HFC-S USB: PH_DEACTIVATE | INDICATION sent (T4 expire)");
-#endif
- hfc->l1_activated = false;
+
+ hfc->l1_activated = 0;
handle_led(hfc, LED_S0_OFF);
}
-/*****************************/
-/* handle S0 state changes */
-/*****************************/
+/* S0 state changed */
static void
-state_handler(hfcusb_data * hfc, __u8 state)
+s0_state_handler(hfcusb_data * hfc, __u8 state)
{
__u8 old_state;
if (state == old_state || state < 1 || state > 8)
return;
-#ifdef CONFIG_HISAX_DEBUG
- DBG(ISDN_DBG, "HFC-S USB: new S0 state:%d old_state:%d", state,
- old_state);
-#endif
+ DBG(HFCUSB_DBG_STATES, "HFC-S USB: S0 statechange(%d -> %d)",
+ old_state, state);
+
if (state < 4 || state == 7 || state == 8) {
if (timer_pending(&hfc->t3_timer))
del_timer(&hfc->t3_timer);
-#ifdef CONFIG_HISAX_DEBUG
- DBG(ISDN_DBG, "HFC-S USB: T3 deactivated");
-#endif
+ DBG(HFCUSB_DBG_STATES, "HFC-S USB: T3 deactivated");
}
if (state >= 7) {
if (timer_pending(&hfc->t4_timer))
del_timer(&hfc->t4_timer);
-#ifdef CONFIG_HISAX_DEBUG
- DBG(ISDN_DBG, "HFC-S USB: T4 deactivated");
-#endif
+ DBG(HFCUSB_DBG_STATES, "HFC-S USB: T4 deactivated");
}
if (state == 7 && !hfc->l1_activated) {
hfc->d_if.ifc.l1l2(&hfc->d_if.ifc,
PH_ACTIVATE | INDICATION, NULL);
-#ifdef CONFIG_HISAX_DEBUG
- DBG(ISDN_DBG, "HFC-S USB: PH_ACTIVATE | INDICATION sent");
-#endif
- hfc->l1_activated = true;
+ DBG(HFCUSB_DBG_STATES, "HFC-S USB: PH_ACTIVATE | INDICATION sent");
+ hfc->l1_activated = 1;
handle_led(hfc, LED_S0_ON);
} else if (state <= 3 /* && activated */ ) {
if (old_state == 7 || old_state == 8) {
-#ifdef CONFIG_HISAX_DEBUG
- DBG(ISDN_DBG, "HFC-S USB: T4 activated");
-#endif
+ DBG(HFCUSB_DBG_STATES, "HFC-S USB: T4 activated");
if (!timer_pending(&hfc->t4_timer)) {
hfc->t4_timer.expires =
jiffies + (HFC_TIMER_T4 * HZ) / 1000;
hfc->d_if.ifc.l1l2(&hfc->d_if.ifc,
PH_DEACTIVATE | INDICATION,
NULL);
-#ifdef CONFIG_HISAX_DEBUG
- DBG(ISDN_DBG,
+ DBG(HFCUSB_DBG_STATES,
"HFC-S USB: PH_DEACTIVATE | INDICATION sent");
-#endif
- hfc->l1_activated = false;
+ hfc->l1_activated = 0;
handle_led(hfc, LED_S0_OFF);
}
}
hfc->l1_state = state;
}
-/* prepare iso urb */
static void
fill_isoc_urb(struct urb *urb, struct usb_device *dev, unsigned int pipe,
void *buf, int num_packets, int packet_size, int interval,
}
/* allocs urbs and start isoc transfer with two pending urbs to avoid
- gaps in the transfer chain */
+ * gaps in the transfer chain
+ */
static int
start_isoc_chain(usb_fifo * fifo, int num_packets_per_urb,
usb_complete_t complete, int packet_size)
{
int i, k, errcode;
- printk(KERN_INFO "HFC-S USB: starting ISO-chain for Fifo %i\n",
- fifo->fifonum);
+ DBG(HFCUSB_DBG_INIT, "HFC-S USB: starting ISO-URBs for fifo:%d\n",
+ fifo->fifonum);
/* allocate Memory for Iso out Urbs */
for (i = 0; i < 2; i++) {
errcode = usb_submit_urb(fifo->iso[i].purb, GFP_KERNEL);
fifo->active = (errcode >= 0) ? 1 : 0;
- if (errcode < 0) {
- printk(KERN_INFO "HFC-S USB: %s URB nr:%d\n",
- symbolic(urb_errlist, errcode), i);
- };
+ if (errcode < 0)
+ printk(KERN_INFO "HFC-S USB: usb_submit_urb URB nr:%d, error(%i): '%s'\n",
+ i, errcode, symbolic(urb_errlist, errcode));
}
return (fifo->active);
}
for (i = 0; i < 2; i++) {
if (fifo->iso[i].purb) {
-#ifdef CONFIG_HISAX_DEBUG
- DBG(USB_DBG,
+ DBG(HFCUSB_DBG_INIT,
"HFC-S USB: Stopping iso chain for fifo %i.%i",
fifo->fifonum, i);
-#endif
usb_kill_urb(fifo->iso[i].purb);
usb_free_urb(fifo->iso[i].purb);
fifo->iso[i].purb = NULL;
}
}
+
usb_kill_urb(fifo->urb);
usb_free_urb(fifo->urb);
fifo->urb = NULL;
ISOC_PACKETS_D, ISOC_PACKETS_D, ISOC_PACKETS_D, ISOC_PACKETS_D
};
-/*****************************************************/
-/* transmit completion routine for all ISO tx fifos */
-/*****************************************************/
static void
tx_iso_complete(struct urb *urb)
{
errcode;
int frame_complete, transp_mode, fifon, status;
__u8 threshbit;
- __u8 threshtable[8] = { 1, 2, 4, 8, 0x10, 0x20, 0x40, 0x80 };
fifon = fifo->fifonum;
status = urb->status;
tx_offset = 0;
+ /* ISO transfer only partially completed,
+ look at individual frame status for details */
+ if (status == -EXDEV) {
+ DBG(HFCUSB_DBG_VERBOSE_USB, "HFC-S USB: tx_iso_complete with -EXDEV"
+ ", urb->status %d, fifonum %d\n",
+ status, fifon);
+
+ for (k = 0; k < iso_packets[fifon]; ++k) {
+ errcode = urb->iso_frame_desc[k].status;
+ if (errcode)
+ DBG(HFCUSB_DBG_VERBOSE_USB, "HFC-S USB: tx_iso_complete "
+ "packet %i, status: %i\n",
+ k, errcode);
+ }
+
+ // clear status, so go on with ISO transfers
+ status = 0;
+ }
+
if (fifo->active && !status) {
transp_mode = 0;
if (fifon < 4 && hfc->b_mode[fifon / 2] == L1_MODE_TRANS)
- transp_mode = true;
+ transp_mode = 1;
/* is FifoFull-threshold set for our channel? */
- threshbit = threshtable[fifon] & hfc->threshold_mask;
+ threshbit = (hfc->threshold_mask & (1 << fifon));
num_isoc_packets = iso_packets[fifon];
/* predict dataflow to avoid fifo overflow */
tx_iso_complete, urb->context);
memset(context_iso_urb->buffer, 0,
sizeof(context_iso_urb->buffer));
- frame_complete = false;
- /* Generate next Iso Packets */
+ frame_complete = 0;
+
+ /* Generate next ISO Packets */
for (k = 0; k < num_isoc_packets; ++k) {
if (fifo->skbuff) {
len = fifo->skbuff->len;
/* add 2 byte flags and 16bit CRC at end of ISDN frame */
fifo->bit_line += 32;
}
- frame_complete = true;
+ frame_complete = 1;
}
memcpy(context_iso_urb->buffer +
}
if (frame_complete) {
- fifo->delete_flg = true;
+ fifo->delete_flg = 1;
fifo->hif->l1l2(fifo->hif,
PH_DATA | CONFIRM,
(void *) (unsigned long) fifo->skbuff->
if (fifo->skbuff && fifo->delete_flg) {
dev_kfree_skb_any(fifo->skbuff);
fifo->skbuff = NULL;
- fifo->delete_flg = false;
+ fifo->delete_flg = 0;
}
- frame_complete = false;
+ frame_complete = 0;
}
}
errcode = usb_submit_urb(urb, GFP_ATOMIC);
if (errcode < 0) {
printk(KERN_INFO
- "HFC-S USB: error submitting ISO URB: %d \n",
+ "HFC-S USB: error submitting ISO URB: %d\n",
errcode);
}
} else {
if (status && !hfc->disc_flag) {
printk(KERN_INFO
- "HFC-S USB: tx_iso_complete : urb->status %s (%i), fifonum=%d\n",
- symbolic(urb_errlist, status), status,
- fifon);
+ "HFC-S USB: tx_iso_complete: error(%i): '%s', fifonum=%d\n",
+ status, symbolic(urb_errlist, status), fifon);
}
}
-} /* tx_iso_complete */
+}
-/*****************************************************/
-/* receive completion routine for all ISO tx fifos */
-/*****************************************************/
static void
rx_iso_complete(struct urb *urb)
{
unsigned int iso_status;
__u8 *buf;
static __u8 eof[8];
-#ifdef CONFIG_HISAX_DEBUG
- __u8 i;
-#endif
fifon = fifo->fifonum;
status = urb->status;
if (urb->status == -EOVERFLOW) {
-#ifdef CONFIG_HISAX_DEBUG
- DBG(USB_DBG,
- "HFC-USB: ignoring USB DATAOVERRUN for fifo %i \n",
- fifon);
-#endif
+ DBG(HFCUSB_DBG_VERBOSE_USB,
+ "HFC-USB: ignoring USB DATAOVERRUN fifo(%i)", fifon);
+ status = 0;
+ }
+
+ /* ISO transfer only partially completed,
+ look at individual frame status for details */
+ if (status == -EXDEV) {
+ DBG(HFCUSB_DBG_VERBOSE_USB, "HFC-S USB: rx_iso_complete with -EXDEV "
+ "urb->status %d, fifonum %d\n",
+ status, fifon);
status = 0;
}
+
if (fifo->active && !status) {
num_isoc_packets = iso_packets[fifon];
maxlen = fifo->usb_packet_maxlen;
offset = urb->iso_frame_desc[k].offset;
buf = context_iso_urb->buffer + offset;
iso_status = urb->iso_frame_desc[k].status;
-#ifdef CONFIG_HISAX_DEBUG
+
if (iso_status && !hfc->disc_flag)
- DBG(USB_DBG,
- "HFC-S USB: ISO packet failure - status:%x",
- iso_status);
+ DBG(HFCUSB_DBG_VERBOSE_USB,
+ "HFC-S USB: rx_iso_complete "
+ "ISO packet %i, status: %i\n",
+ k, iso_status);
- if ((fifon == 5) && (debug > 1)) {
- printk(KERN_INFO
+ if (fifon == HFCUSB_D_RX) {
+ DBG(HFCUSB_DBG_VERBOSE_USB,
"HFC-S USB: ISO-D-RX lst_urblen:%2d "
- "act_urblen:%2d max-urblen:%2d "
- "EOF:0x%0x DATA: ",
+ "act_urblen:%2d max-urblen:%2d EOF:0x%0x",
fifo->last_urblen, len, maxlen,
eof[5]);
- for (i = 0; i < len; i++)
- printk("%.2x ", buf[i]);
- printk("\n");
+
+ DBG_PACKET(HFCUSB_DBG_VERBOSE_USB, buf, len);
}
-#endif
+
if (fifo->last_urblen != maxlen) {
/* the threshold mask is in the 2nd status byte */
hfc->threshold_mask = buf[1];
/* care for L1 state only for D-Channel
to avoid overlapped iso completions */
- if (fifon == 5) {
+ if (fifon == HFCUSB_D_RX) {
/* the S0 state is in the upper half
of the 1st status byte */
- state_handler(hfc, buf[0] >> 4);
+ s0_state_handler(hfc, buf[0] >> 4);
}
eof[fifon] = buf[0] & 1;
if (len > 2)
collect_rx_frame(fifo, buf + 2,
len - 2,
- (len <
- maxlen) ?
+ (len < maxlen) ?
eof[fifon] : 0);
} else {
collect_rx_frame(fifo, buf, len,
rx_iso_complete, urb->context);
errcode = usb_submit_urb(urb, GFP_ATOMIC);
if (errcode < 0) {
- printk(KERN_INFO
- "HFC-S USB: error submitting ISO URB: %d \n",
+ printk(KERN_ERR
+ "HFC-S USB: error submitting ISO URB: %d\n",
errcode);
}
} else {
if (status && !hfc->disc_flag) {
- printk(KERN_INFO
+ printk(KERN_ERR
"HFC-S USB: rx_iso_complete : "
"urb->status %d, fifonum %d\n",
status, fifon);
}
}
-} /* rx_iso_complete */
+}
-/*****************************************************/
-/* collect data from interrupt or isochron in */
-/*****************************************************/
+/* collect rx data from INT- and ISO-URBs */
static void
collect_rx_frame(usb_fifo * fifo, __u8 * data, int len, int finish)
{
hfcusb_data *hfc = fifo->hfc;
int transp_mode, fifon;
-#ifdef CONFIG_HISAX_DEBUG
- int i;
-#endif
+
fifon = fifo->fifonum;
transp_mode = 0;
if (fifon < 4 && hfc->b_mode[fifon / 2] == L1_MODE_TRANS)
- transp_mode = true;
+ transp_mode = 1;
if (!fifo->skbuff) {
fifo->skbuff = dev_alloc_skb(fifo->max_size + 3);
if (!fifo->skbuff) {
- printk(KERN_INFO
- "HFC-S USB: cannot allocate buffer (dev_alloc_skb) fifo:%d\n",
+ printk(KERN_ERR
+ "HFC-S USB: cannot allocate buffer for fifo(%d)\n",
fifon);
return;
}
if (fifo->skbuff->len + len < fifo->max_size) {
memcpy(skb_put(fifo->skbuff, len), data, len);
} else {
-#ifdef CONFIG_HISAX_DEBUG
- printk(KERN_INFO "HFC-S USB: ");
- for (i = 0; i < 15; i++)
- printk("%.2x ",
- fifo->skbuff->data[fifo->skbuff->
- len - 15 + i]);
- printk("\n");
-#endif
- printk(KERN_INFO
- "HCF-USB: got frame exceeded fifo->max_size:%d on fifo:%d\n",
+ DBG(HFCUSB_DBG_FIFO_ERR,
+ "HCF-USB: got frame exceeded fifo->max_size(%d) fifo(%d)",
fifo->max_size, fifon);
+ DBG_SKB(HFCUSB_DBG_VERBOSE_USB, fifo->skbuff);
+ skb_trim(fifo->skbuff, 0);
}
}
if (transp_mode && fifo->skbuff->len >= 128) {
if (finish) {
if ((!fifo->skbuff->data[fifo->skbuff->len - 1])
&& (fifo->skbuff->len > 3)) {
+
+ if (fifon == HFCUSB_D_RX) {
+ DBG(HFCUSB_DBG_DCHANNEL,
+ "HFC-S USB: D-RX len(%d)", fifo->skbuff->len);
+ DBG_SKB(HFCUSB_DBG_DCHANNEL, fifo->skbuff);
+ }
+
/* remove CRC & status */
skb_trim(fifo->skbuff, fifo->skbuff->len - 3);
if (fifon == HFCUSB_PCM_RX) {
fifo->skbuff);
fifo->skbuff = NULL; /* buffer was freed from upper layer */
} else {
- if (fifo->skbuff->len > 3) {
- printk(KERN_INFO
- "HFC-S USB: got frame %d bytes but CRC ERROR on fifo:%d!!!\n",
- fifo->skbuff->len, fifon);
-#ifdef CONFIG_HISAX_DEBUG
- if (debug > 1) {
- printk(KERN_INFO "HFC-S USB: ");
- for (i = 0; i < 15; i++)
- printk("%.2x ",
- fifo->skbuff->
- data[fifo->skbuff->
- len - 15 + i]);
- printk("\n");
- }
-#endif
- }
-#ifdef CONFIG_HISAX_DEBUG
- else {
- printk(KERN_INFO
- "HFC-S USB: frame to small (%d bytes)!!!\n",
- fifo->skbuff->len);
- }
-#endif
+ DBG(HFCUSB_DBG_FIFO_ERR,
+ "HFC-S USB: ERROR frame len(%d) fifo(%d)",
+ fifo->skbuff->len, fifon);
+ DBG_SKB(HFCUSB_DBG_VERBOSE_USB, fifo->skbuff);
skb_trim(fifo->skbuff, 0);
}
}
}
-/***********************************************/
-/* receive completion routine for all rx fifos */
-/***********************************************/
static void
-rx_complete(struct urb *urb)
+rx_int_complete(struct urb *urb)
{
int len;
int status;
usb_fifo *fifo = (usb_fifo *) urb->context;
hfcusb_data *hfc = fifo->hfc;
static __u8 eof[8];
-#ifdef CONFIG_HISAX_DEBUG
- __u8 i;
-#endif
urb->dev = hfc->dev; /* security init */
fifon = fifo->fifonum;
if ((!fifo->active) || (urb->status)) {
-#ifdef CONFIG_HISAX_DEBUG
- DBG(USB_DBG, "HFC-S USB: RX-Fifo %i is going down (%i)",
+ DBG(HFCUSB_DBG_INIT, "HFC-S USB: RX-Fifo %i is going down (%i)",
fifon, urb->status);
-#endif
+
fifo->urb->interval = 0; /* cancel automatic rescheduling */
if (fifo->skbuff) {
dev_kfree_skb_any(fifo->skbuff);
buf = fifo->buffer;
maxlen = fifo->usb_packet_maxlen;
-#ifdef CONFIG_HISAX_DEBUG
- if ((fifon == 5) && (debug > 1)) {
- printk(KERN_INFO
- "HFC-S USB: INT-D-RX lst_urblen:%2d act_urblen:%2d max-urblen:%2d EOF:0x%0x DATA: ",
- fifo->last_urblen, len, maxlen, eof[5]);
- for (i = 0; i < len; i++)
- printk("%.2x ", buf[i]);
- printk("\n");
+ if (fifon == HFCUSB_D_RX) {
+ DBG(HFCUSB_DBG_VERBOSE_USB,
+ "HFC-S USB: INT-D-RX lst_urblen:%2d "
+ "act_urblen:%2d max-urblen:%2d EOF:0x%0x",
+ fifo->last_urblen, len, maxlen,
+ eof[5]);
+ DBG_PACKET(HFCUSB_DBG_VERBOSE_USB, buf, len);
}
-#endif
if (fifo->last_urblen != fifo->usb_packet_maxlen) {
/* the threshold mask is in the 2nd status byte */
hfc->threshold_mask = buf[1];
/* the S0 state is in the upper half of the 1st status byte */
- state_handler(hfc, buf[0] >> 4);
+ s0_state_handler(hfc, buf[0] >> 4);
eof[fifon] = buf[0] & 1;
/* if we have more than the 2 status bytes -> collect data */
if (len > 2)
status = usb_submit_urb(urb, GFP_ATOMIC);
if (status) {
printk(KERN_INFO
- "HFC-S USB: error resubmitting URN at rx_complete...\n");
+ "HFC-S USB: %s error resubmitting URB fifo(%d)\n",
+ __FUNCTION__, fifon);
}
-} /* rx_complete */
+}
-/***************************************************/
-/* start the interrupt transfer for the given fifo */
-/***************************************************/
+/* start initial INT-URB for certain fifo */
static void
start_int_fifo(usb_fifo * fifo)
{
int errcode;
- printk(KERN_INFO "HFC-S USB: starting intr IN fifo:%d\n",
- fifo->fifonum);
+ DBG(HFCUSB_DBG_INIT, "HFC-S USB: starting RX INT-URB for fifo:%d\n",
+ fifo->fifonum);
if (!fifo->urb) {
fifo->urb = usb_alloc_urb(0, GFP_KERNEL);
}
usb_fill_int_urb(fifo->urb, fifo->hfc->dev, fifo->pipe,
fifo->buffer, fifo->usb_packet_maxlen,
- rx_complete, fifo, fifo->intervall);
+ rx_int_complete, fifo, fifo->intervall);
fifo->active = 1; /* must be marked active */
errcode = usb_submit_urb(fifo->urb, GFP_KERNEL);
if (errcode) {
- printk(KERN_INFO
+ printk(KERN_ERR
"HFC-S USB: submit URB error(start_int_info): status:%i\n",
errcode);
fifo->active = 0;
fifo->skbuff = NULL;
}
-} /* start_int_fifo */
+}
-/*****************************/
-/* set the B-channel mode */
-/*****************************/
static void
-set_hfcmode(hfcusb_data * hfc, int channel, int mode)
+setup_bchannel(hfcusb_data * hfc, int channel, int mode)
{
__u8 val, idx_table[2] = { 0, 2 };
if (hfc->disc_flag) {
return;
}
-#ifdef CONFIG_HISAX_DEBUG
- DBG(ISDN_DBG, "HFC-S USB: setting channel %d to mode %d", channel,
- mode);
-#endif
+ DBG(HFCUSB_DBG_STATES, "HFC-S USB: setting channel %d to mode %d",
+ channel, mode);
hfc->b_mode[channel] = mode;
/* setup CON_HDLC */
switch (pr) {
case PH_ACTIVATE | REQUEST:
if (fifo->fifonum == HFCUSB_D_TX) {
-#ifdef CONFIG_HISAX_DEBUG
- DBG(ISDN_DBG,
+ DBG(HFCUSB_DBG_STATES,
"HFC_USB: hfc_usb_d_l2l1 D-chan: PH_ACTIVATE | REQUEST");
-#endif
+
if (hfc->l1_state != 3
&& hfc->l1_state != 7) {
hfc->d_if.ifc.l1l2(&hfc->d_if.ifc,
PH_DEACTIVATE |
INDICATION,
NULL);
-#ifdef CONFIG_HISAX_DEBUG
- DBG(ISDN_DBG,
+ DBG(HFCUSB_DBG_STATES,
"HFC-S USB: PH_DEACTIVATE | INDICATION sent (not state 3 or 7)");
-#endif
} else {
if (hfc->l1_state == 7) { /* l1 already active */
hfc->d_if.ifc.l1l2(&hfc->
|
INDICATION,
NULL);
-#ifdef CONFIG_HISAX_DEBUG
- DBG(ISDN_DBG,
+ DBG(HFCUSB_DBG_STATES,
"HFC-S USB: PH_ACTIVATE | INDICATION sent again ;)");
-#endif
} else {
/* force sending sending INFO1 */
queue_control_request(hfc,
}
}
} else {
-#ifdef CONFIG_HISAX_DEBUG
- DBG(ISDN_DBG,
- "HFC_USB: hfc_usb_d_l2l1 Bx-chan: PH_ACTIVATE | REQUEST");
-#endif
- set_hfcmode(hfc,
+ DBG(HFCUSB_DBG_STATES,
+ "HFC_USB: hfc_usb_d_l2l1 B-chan: PH_ACTIVATE | REQUEST");
+ setup_bchannel(hfc,
(fifo->fifonum ==
HFCUSB_B1_TX) ? 0 : 1,
(long) arg);
break;
case PH_DEACTIVATE | REQUEST:
if (fifo->fifonum == HFCUSB_D_TX) {
-#ifdef CONFIG_HISAX_DEBUG
- DBG(ISDN_DBG,
+ DBG(HFCUSB_DBG_STATES,
"HFC_USB: hfc_usb_d_l2l1 D-chan: PH_DEACTIVATE | REQUEST");
-#endif
- printk(KERN_INFO
- "HFC-S USB: ISDN TE device should not deativate...\n");
} else {
-#ifdef CONFIG_HISAX_DEBUG
- DBG(ISDN_DBG,
+ DBG(HFCUSB_DBG_STATES,
"HFC_USB: hfc_usb_d_l2l1 Bx-chan: PH_DEACTIVATE | REQUEST");
-#endif
- set_hfcmode(hfc,
+ setup_bchannel(hfc,
(fifo->fifonum ==
HFCUSB_B1_TX) ? 0 : 1,
(int) L1_MODE_NULL);
if (fifo->skbuff && fifo->delete_flg) {
dev_kfree_skb_any(fifo->skbuff);
fifo->skbuff = NULL;
- fifo->delete_flg = false;
+ fifo->delete_flg = 0;
}
fifo->skbuff = arg; /* we have a new buffer */
break;
default:
- printk(KERN_INFO
- "HFC_USB: hfc_usb_d_l2l1: unkown state : %#x\n",
- pr);
+ DBG(HFCUSB_DBG_STATES,
+ "HFC_USB: hfc_usb_d_l2l1: unkown state : %#x", pr);
break;
}
}
-/***************************************************************************/
-/* usb_init is called once when a new matching device is detected to setup */
-/* main parameters. It registers the driver at the main hisax module. */
-/* on success 0 is returned. */
-/***************************************************************************/
+/* initial init HFC-S USB chip registers, HiSax interface, USB URBs */
static int
-usb_init(hfcusb_data * hfc)
+hfc_usb_init(hfcusb_data * hfc)
{
usb_fifo *fifo;
int i, err;
/* aux = output, reset off */
write_usb(hfc, HFCUSB_CIRM, 0x10);
- /* set USB_SIZE to match the wMaxPacketSize for INT or BULK transfers */
+ /* set USB_SIZE to match wMaxPacketSize for INT or BULK transfers */
write_usb(hfc, HFCUSB_USB_SIZE,
(hfc->packet_size / 8) | ((hfc->packet_size / 8) << 4));
- /* set USB_SIZE_I to match the wMaxPacketSize for ISO transfers */
+ /* set USB_SIZE_I to match wMaxPacketSize for ISO transfers */
write_usb(hfc, HFCUSB_USB_SIZE_I, hfc->iso_packet_size);
/* enable PCM/GCI master mode */
hfc->b_mode[0] = L1_MODE_NULL;
hfc->b_mode[1] = L1_MODE_NULL;
- hfc->l1_activated = false;
- hfc->disc_flag = false;
+ hfc->l1_activated = 0;
+ hfc->disc_flag = 0;
hfc->led_state = 0;
hfc->led_new_data = 0;
hfc->old_led_state = 0;
handle_led(hfc, LED_POWER_ON);
return (0);
-} /* usb_init */
+}
-/*************************************************/
-/* function called to probe a new plugged device */
-/*************************************************/
+/* initial callback for each plugged USB device */
static int
hfc_usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
{
}
}
-#ifdef CONFIG_HISAX_DEBUG
- DBG(USB_DBG,
- "HFC-USB: probing interface(%d) actalt(%d) minor(%d)\n", ifnum,
- iface->desc.bAlternateSetting, intf->minor);
-#endif
printk(KERN_INFO
"HFC-S USB: probing interface(%d) actalt(%d) minor(%d)\n",
ifnum, iface->desc.bAlternateSetting, intf->minor);
/* check for config EOL element */
while (validconf[cfg_used][0]) {
- cfg_found = true;
+ cfg_found = 1;
vcf = validconf[cfg_used];
/* first endpoint descriptor */
ep = iface->endpoint;
-#ifdef CONFIG_HISAX_DEBUG
- DBG(USB_DBG,
- "HFC-S USB: (if=%d alt=%d cfg_used=%d)\n",
- ifnum, probe_alt_setting, cfg_used);
-#endif
+
memcpy(cmptbl, vcf, 16 * sizeof(int));
/* check for all endpoints in this alternate setting */
idx++;
attr = ep->desc.bmAttributes;
if (cmptbl[idx] == EP_NUL) {
- cfg_found = false;
+ cfg_found = 0;
}
if (attr == USB_ENDPOINT_XFER_INT
&& cmptbl[idx] == EP_INT)
cmptbl[idx] = EP_NUL;
/* check if all INT endpoints match minimum interval */
- if (attr == USB_ENDPOINT_XFER_INT
- && ep->desc.bInterval <
- vcf[17]) {
-#ifdef CONFIG_HISAX_DEBUG
- if (cfg_found)
- DBG(USB_DBG,
- "HFC-S USB: Interrupt Endpoint interval < %d found - skipping config",
- vcf[17]);
-#endif
- cfg_found = false;
+ if ((attr == USB_ENDPOINT_XFER_INT)
+ && (ep->desc.bInterval < vcf[17])) {
+ cfg_found = 0;
}
ep++;
}
/* all entries must be EP_NOP or EP_NUL for a valid config */
if (cmptbl[i] != EP_NOP
&& cmptbl[i] != EP_NUL)
- cfg_found = false;
+ cfg_found = 0;
}
if (cfg_found) {
if (cfg_used < small_match) {
probe_alt_setting;
iface_used = iface;
}
-#ifdef CONFIG_HISAX_DEBUG
- DBG(USB_DBG,
- "HFC-USB: small_match=%x %x\n",
- small_match, alt_used);
-#endif
}
cfg_used++;
}
alt_idx++;
- } /* (alt_idx < intf->num_altsetting) */
+ } /* (alt_idx < intf->num_altsetting) */
/* found a valid USB Ta Endpint config */
if (small_match != 0xffff) {
iface = iface_used;
- if (!
- (context =
- kzalloc(sizeof(hfcusb_data), GFP_KERNEL)))
+ if (!(context = kzalloc(sizeof(hfcusb_data), GFP_KERNEL)))
return (-ENOMEM); /* got no mem */
ep = iface->endpoint;
driver_info;
printk(KERN_INFO "HFC-S USB: detected \"%s\"\n",
driver_info->vend_name);
-#ifdef CONFIG_HISAX_DEBUG
- DBG(USB_DBG,
- "HFC-S USB: Endpoint-Config: %s (if=%d alt=%d)\n",
+
+ DBG(HFCUSB_DBG_INIT,
+ "HFC-S USB: Endpoint-Config: %s (if=%d alt=%d), E-Channel(%d)",
conf_str[small_match], context->if_used,
- context->alt_used);
- printk(KERN_INFO
- "HFC-S USB: E-channel (\"ECHO:\") logging ");
- if (validconf[small_match][18])
- printk(" possible\n");
- else
- printk("NOT possible\n");
-#endif
+ context->alt_used,
+ validconf[small_match][18]);
+
/* init the chip and register the driver */
- if (usb_init(context)) {
+ if (hfc_usb_init(context)) {
usb_kill_urb(context->ctrl_urb);
usb_free_urb(context->ctrl_urb);
context->ctrl_urb = NULL;
return (-EIO);
}
-/****************************************************/
-/* function called when an active device is removed */
-/****************************************************/
+/* callback for unplugged USB device */
static void
hfc_usb_disconnect(struct usb_interface
*intf)
{
hfcusb_data *context = usb_get_intfdata(intf);
int i;
+
+ handle_led(context, LED_POWER_OFF);
+ schedule_timeout((10 * HZ) / 1000);
+
printk(KERN_INFO "HFC-S USB: device disconnect\n");
- context->disc_flag = true;
+ context->disc_flag = 1;
usb_set_intfdata(intf, NULL);
if (!context)
return;
del_timer(&context->t3_timer);
if (timer_pending(&context->t4_timer))
del_timer(&context->t4_timer);
+
/* tell all fifos to terminate */
for (i = 0; i < HFCUSB_NUM_FIFOS; i++) {
if (context->fifos[i].usb_transfer_mode == USB_ISOC) {
if (context->fifos[i].active > 0) {
stop_isoc_chain(&context->fifos[i]);
-#ifdef CONFIG_HISAX_DEBUG
- DBG(USB_DBG,
- "HFC-S USB: hfc_usb_disconnect: stopping ISOC chain Fifo no %i",
- i);
-#endif
+ DBG(HFCUSB_DBG_INIT,
+ "HFC-S USB: %s stopping ISOC chain Fifo(%i)",
+ __FUNCTION__, i);
}
} else {
if (context->fifos[i].active > 0) {
context->fifos[i].active = 0;
-#ifdef CONFIG_HISAX_DEBUG
- DBG(USB_DBG,
- "HFC-S USB: hfc_usb_disconnect: unlinking URB for Fifo no %i",
- i);
-#endif
+ DBG(HFCUSB_DBG_INIT,
+ "HFC-S USB: %s unlinking URB for Fifo(%i)",
+ __FUNCTION__, i);
}
usb_kill_urb(context->fifos[i].urb);
usb_free_urb(context->fifos[i].urb);
context->ctrl_urb = NULL;
hisax_unregister(&context->d_if);
kfree(context); /* free our structure again */
-} /* hfc_usb_disconnect */
+}
-/************************************/
-/* our driver information structure */
-/************************************/
static struct usb_driver hfc_drv = {
.name = "hfc_usb",
.id_table = hfcusb_idtab,
.probe = hfc_usb_probe,
.disconnect = hfc_usb_disconnect,
};
+
static void __exit
-hfc_usb_exit(void)
+hfc_usb_mod_exit(void)
{
-#ifdef CONFIG_HISAX_DEBUG
- DBG(USB_DBG, "HFC-S USB: calling \"hfc_usb_exit\" ...");
-#endif
- usb_deregister(&hfc_drv); /* release our driver */
+ usb_deregister(&hfc_drv); /* release our driver */
printk(KERN_INFO "HFC-S USB: module removed\n");
}
static int __init
-hfc_usb_init(void)
+hfc_usb_mod_init(void)
{
+ char revstr[30], datestr[30], dummy[30];
#ifndef CONFIG_HISAX_DEBUG
- unsigned int debug = -1;
+ hfc_debug = debug;
#endif
- char revstr[30], datestr[30], dummy[30];
sscanf(hfcusb_revision,
"%s %s $ %s %s %s $ ", dummy, revstr,
dummy, datestr, dummy);
return (0);
}
-module_init(hfc_usb_init);
-module_exit(hfc_usb_exit);
+module_init(hfc_usb_mod_init);
+module_exit(hfc_usb_mod_exit);
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
projects / linux-2.6 / commitdiff