Say Y here to support the Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 receiver.
config DVB_USB_DTT200U
- tristate "WideView/Yakumo/Hama/Typhoon/Yuan DVB-T USB2.0 support"
+ tristate "WideView WT-200U and WT-220U (pen) DVB-T USB2.0 support (Yakumo/Hama/Typhoon/Yuan)"
depends on DVB_USB
help
Say Y here to support the WideView/Yakumo/Hama/Typhoon/Yuan DVB-T USB2.0 receiver.
The receivers are also known as DTT200U (Yakumo) and UB300 (Yuan).
+
+ The WT-220U and its clones are pen-sized.
struct dtt200u_fe_state {
struct dvb_usb_device *d;
+ fe_status_t stat;
+
struct dvb_frontend_parameters fep;
struct dvb_frontend frontend;
};
-#define moan(which,what) info("unexpected value in '%s' for cmd '%02x' - please report to linux-dvb@linuxtv.org",which,what)
-
static int dtt200u_fe_read_status(struct dvb_frontend* fe, fe_status_t *stat)
{
struct dtt200u_fe_state *state = fe->demodulator_priv;
- u8 bw = GET_TUNE_STAT;
- u8 br[3] = { 0 };
-// u8 bdeb[5] = { 0 };
+ u8 st = GET_TUNE_STATUS, b[3];
+
+ dvb_usb_generic_rw(state->d,&st,1,b,3,0);
- dvb_usb_generic_rw(state->d,&bw,1,br,3,0);
- switch (br[0]) {
+ switch (b[0]) {
case 0x01:
- *stat = FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK;
+ *stat = FE_HAS_SIGNAL | FE_HAS_CARRIER |
+ FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK;
break;
- case 0x00:
- *stat = 0;
+ case 0x00: /* pending */
+ *stat = FE_TIMEDOUT; /* during set_frontend */
break;
default:
- moan("br[0]",GET_TUNE_STAT);
+ case 0x02: /* failed */
+ *stat = 0;
break;
}
-
-// bw[0] = 0x88;
-// dvb_usb_generic_rw(state->d,bw,1,bdeb,5,0);
-
-// deb_info("%02x: %02x %02x %02x %02x %02x\n",bw[0],bdeb[0],bdeb[1],bdeb[2],bdeb[3],bdeb[4]);
-
return 0;
}
+
static int dtt200u_fe_read_ber(struct dvb_frontend* fe, u32 *ber)
{
struct dtt200u_fe_state *state = fe->demodulator_priv;
- u8 bw = GET_BER;
- *ber = 0;
- dvb_usb_generic_rw(state->d,&bw,1,(u8*) ber,3,0);
+ u8 bw = GET_VIT_ERR_CNT,b[3];
+ dvb_usb_generic_rw(state->d,&bw,1,b,3,0);
+ *ber = (b[0] << 16) | (b[1] << 8) | b[2];
return 0;
}
static int dtt200u_fe_read_unc_blocks(struct dvb_frontend* fe, u32 *unc)
{
struct dtt200u_fe_state *state = fe->demodulator_priv;
- u8 bw = GET_UNK;
- *unc = 0;
- dvb_usb_generic_rw(state->d,&bw,1,(u8*) unc,3,0);
+ u8 bw = GET_RS_UNCOR_BLK_CNT,b[2];
+
+ dvb_usb_generic_rw(state->d,&bw,1,b,2,0);
+ *unc = (b[0] << 8) | b[1];
return 0;
}
static int dtt200u_fe_read_signal_strength(struct dvb_frontend* fe, u16 *strength)
{
struct dtt200u_fe_state *state = fe->demodulator_priv;
- u8 bw = GET_SIG_STRENGTH, b;
+ u8 bw = GET_AGC, b;
dvb_usb_generic_rw(state->d,&bw,1,&b,1,0);
*strength = (b << 8) | b;
return 0;
static int dtt200u_fe_init(struct dvb_frontend* fe)
{
struct dtt200u_fe_state *state = fe->demodulator_priv;
- u8 b = RESET_DEMOD;
+ u8 b = SET_INIT;
return dvb_usb_generic_write(state->d,&b,1);
}
static int dtt200u_fe_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings *tune)
{
tune->min_delay_ms = 1500;
- tune->step_size = 166667;
- tune->max_drift = 166667 * 2;
+ tune->step_size = 0;
+ tune->max_drift = 0;
return 0;
}
struct dvb_frontend_parameters *fep)
{
struct dtt200u_fe_state *state = fe->demodulator_priv;
+ int i;
+ fe_status_t st;
u16 freq = fep->frequency / 250000;
- u8 bw,bwbuf[2] = { SET_BANDWIDTH, 0 }, freqbuf[3] = { SET_FREQUENCY, 0, 0 };
+ u8 bwbuf[2] = { SET_BANDWIDTH, 0 },freqbuf[3] = { SET_RF_FREQ, 0, 0 };
switch (fep->u.ofdm.bandwidth) {
- case BANDWIDTH_8_MHZ: bw = 8; break;
- case BANDWIDTH_7_MHZ: bw = 7; break;
- case BANDWIDTH_6_MHZ: bw = 6; break;
+ case BANDWIDTH_8_MHZ: bwbuf[1] = 8; break;
+ case BANDWIDTH_7_MHZ: bwbuf[1] = 7; break;
+ case BANDWIDTH_6_MHZ: bwbuf[1] = 6; break;
case BANDWIDTH_AUTO: return -EOPNOTSUPP;
default:
return -EINVAL;
}
- deb_info("set_frontend\n");
- bwbuf[1] = bw;
dvb_usb_generic_write(state->d,bwbuf,2);
freqbuf[1] = freq & 0xff;
freqbuf[2] = (freq >> 8) & 0xff;
dvb_usb_generic_write(state->d,freqbuf,3);
- memcpy(&state->fep,fep,sizeof(struct dvb_frontend_parameters));
+ for (i = 0; i < 30; i++) {
+ msleep(20);
+ dtt200u_fe_read_status(fe, &st);
+ if (st & FE_TIMEDOUT)
+ continue;
+ }
return 0;
}
static struct dvb_frontend_ops dtt200u_fe_ops = {
.info = {
- .name = "DTT200U (Yakumo/Typhoon/Hama) DVB-T",
+ .name = "WideView USB DVB-T",
.type = FE_OFDM,
.frequency_min = 44250000,
.frequency_max = 867250000,
*
* Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de)
*
+ * Thanks to Steve Chang from WideView for providing support for the WT-220U.
+ *
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
* Software Foundation, version 2.
module_param_named(debug,dvb_usb_dtt200u_debug, int, 0644);
MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2 (or-able))." DVB_USB_DEBUG_STATUS);
+static int dtt200u_power_ctrl(struct dvb_usb_device *d, int onoff)
+{
+ u8 b = SET_INIT;
+
+ if (onoff)
+ dvb_usb_generic_write(d,&b,2);
+
+ return 0;
+}
+
static int dtt200u_streaming_ctrl(struct dvb_usb_device *d, int onoff)
{
- u8 b_streaming[2] = { SET_TS_CTRL, onoff };
+ u8 b_streaming[2] = { SET_STREAMING, onoff };
u8 b_rst_pid = RESET_PID_FILTER;
dvb_usb_generic_write(d,b_streaming,2);
- if (!onoff)
+ if (onoff == 0)
dvb_usb_generic_write(d,&b_rst_pid,1);
return 0;
}
b_pid[0] = SET_PID_FILTER;
b_pid[1] = index;
b_pid[2] = pid & 0xff;
- b_pid[3] = (pid >> 8) & 0xff;
+ b_pid[3] = (pid >> 8) & 0x1f;
return dvb_usb_generic_write(d,b_pid,4);
}
{ 0x80, 0x08, KEY_5 },
{ 0x80, 0x09, KEY_6 },
{ 0x80, 0x0a, KEY_7 },
- { 0x00, 0x0c, KEY_ZOOM },
+ { 0x80, 0x0c, KEY_ZOOM },
{ 0x80, 0x0d, KEY_0 },
- { 0x00, 0x0e, KEY_SELECT },
+ { 0x80, 0x0e, KEY_SELECT },
{ 0x80, 0x12, KEY_POWER },
{ 0x80, 0x1a, KEY_CHANNELUP },
{ 0x80, 0x1b, KEY_8 },
static int dtt200u_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
{
- u8 key[5],cmd = GET_RC_KEY;
+ u8 key[5],cmd = GET_RC_CODE;
dvb_usb_generic_rw(d,&cmd,1,key,5,0);
dvb_usb_nec_rc_key_to_event(d,key,event,state);
if (key[0] != 0)
}
static struct dvb_usb_properties dtt200u_properties;
+static struct dvb_usb_properties wt220u_properties;
static int dtt200u_usb_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
- return dvb_usb_device_init(intf,&dtt200u_properties,THIS_MODULE);
+ if (dvb_usb_device_init(intf,&dtt200u_properties,THIS_MODULE) == 0 ||
+ dvb_usb_device_init(intf,&wt220u_properties,THIS_MODULE) == 0)
+ return 0;
+
+ return -ENODEV;
}
static struct usb_device_id dtt200u_usb_table [] = {
+// { USB_DEVICE(0x04b4,0x8613) },
{ USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_DTT200U_COLD) },
{ USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_DTT200U_WARM) },
+ { USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_WT220U_COLD) },
+ { USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_WT220U_WARM) },
{ 0 },
};
MODULE_DEVICE_TABLE(usb, dtt200u_usb_table);
static struct dvb_usb_properties dtt200u_properties = {
.caps = DVB_USB_HAS_PID_FILTER | DVB_USB_NEED_PID_FILTERING,
- .pid_filter_count = 255, /* It is a guess, but there are at least 10 */
+ .pid_filter_count = 15,
.usb_ctrl = CYPRESS_FX2,
.firmware = "dvb-usb-dtt200u-01.fw",
+ .power_ctrl = dtt200u_power_ctrl,
.streaming_ctrl = dtt200u_streaming_ctrl,
.pid_filter = dtt200u_pid_filter,
.frontend_attach = dtt200u_frontend_attach,
- .rc_interval = 200,
+ .rc_interval = 300,
.rc_key_map = dtt200u_rc_keys,
.rc_key_map_size = ARRAY_SIZE(dtt200u_rc_keys),
.rc_query = dtt200u_rc_query,
.num_device_descs = 1,
.devices = {
- { .name = "WideView/Yakumo/Hama/Typhoon DVB-T USB2.0)",
+ { .name = "WideView/Yuan/Yakumo/Hama/Typhoon DVB-T USB2.0 (WT-200U)",
.cold_ids = { &dtt200u_usb_table[0], NULL },
.warm_ids = { &dtt200u_usb_table[1], NULL },
},
}
};
+static struct dvb_usb_properties wt220u_properties = {
+ .caps = DVB_USB_HAS_PID_FILTER | DVB_USB_NEED_PID_FILTERING,
+ .pid_filter_count = 15,
+
+ .usb_ctrl = CYPRESS_FX2,
+ .firmware = "dvb-usb-wt220u-01.fw",
+
+ .power_ctrl = dtt200u_power_ctrl,
+ .streaming_ctrl = dtt200u_streaming_ctrl,
+ .pid_filter = dtt200u_pid_filter,
+ .frontend_attach = dtt200u_frontend_attach,
+
+ .rc_interval = 300,
+ .rc_key_map = dtt200u_rc_keys,
+ .rc_key_map_size = ARRAY_SIZE(dtt200u_rc_keys),
+ .rc_query = dtt200u_rc_query,
+
+ .generic_bulk_ctrl_endpoint = 0x01,
+
+ /* parameter for the MPEG2-data transfer */
+ .urb = {
+ .type = DVB_USB_BULK,
+ .count = 7,
+ .endpoint = 0x02,
+ .u = {
+ .bulk = {
+ .buffersize = 4096,
+ }
+ }
+ },
+
+ .num_device_descs = 1,
+ .devices = {
+ { .name = "WideView WT-220U PenType Receiver (and clones)",
+ .cold_ids = { &dtt200u_usb_table[2], NULL },
+ .warm_ids = { &dtt200u_usb_table[3], NULL },
+ },
+ { 0 },
+ }
+};
+
/* usb specific object needed to register this driver with the usb subsystem */
static struct usb_driver dtt200u_usb_driver = {
.owner = THIS_MODULE,
- .name = "dtt200u",
+ .name = "dvb_usb_dtt200u",
.probe = dtt200u_usb_probe,
.disconnect = dvb_usb_device_exit,
.id_table = dtt200u_usb_table,
module_exit(dtt200u_usb_module_exit);
MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>");
-MODULE_DESCRIPTION("Driver for the WideView/Yakumo/Hama/Typhoon DVB-T USB2.0 device");
+MODULE_DESCRIPTION("Driver for the WideView/Yakumo/Hama/Typhoon DVB-T USB2.0 devices");
MODULE_VERSION("1.0");
MODULE_LICENSE("GPL");
/* guessed protocol description (reverse engineered):
* read
* 00 - USB type 0x02 for usb2.0, 0x01 for usb1.1
- * 81 - <TS_LOCK> <current frequency divided by 250000>
- * 82 - crash - do not touch
- * 83 - crash - do not touch
- * 84 - remote control
- * 85 - crash - do not touch (OK, stop testing here)
* 88 - locking 2 bytes (0x80 0x40 == no signal, 0x89 0x20 == nice signal)
- * 89 - noise-to-signal
- * 8a - unkown 1 byte - signal_strength
- * 8c - ber ???
- * 8d - ber
- * 8e - unc
*/
-#define GET_SPEED 0x00
-#define GET_TUNE_STAT 0x81
-#define GET_RC_KEY 0x84
-#define GET_STATUS 0x88
-#define GET_SNR 0x89
-#define GET_SIG_STRENGTH 0x8a
-#define GET_UNK 0x8c
-#define GET_BER 0x8d
-#define GET_UNC 0x8e
+#define GET_SPEED 0x00
+#define GET_TUNE_STATUS 0x81
+#define GET_RC_CODE 0x84
+#define GET_CONFIGURATION 0x88
+#define GET_AGC 0x89
+#define GET_SNR 0x8a
+#define GET_VIT_ERR_CNT 0x8c
+#define GET_RS_ERR_CNT 0x8d
+#define GET_RS_UNCOR_BLK_CNT 0x8e
/* write
- * 01 - reset the demod
+ * 01 - init
* 02 - frequency (divided by 250000)
* 03 - bandwidth
* 04 - pid table (index pid(7:0) pid(12:8))
* 05 - reset the pid table
- * 08 - demod transfer enabled or not (FX2 transfer is enabled by default)
+ * 08 - transfer switch
*/
-#define RESET_DEMOD 0x01
-#define SET_FREQUENCY 0x02
+#define SET_INIT 0x01
+#define SET_RF_FREQ 0x02
#define SET_BANDWIDTH 0x03
#define SET_PID_FILTER 0x04
#define RESET_PID_FILTER 0x05
-#define SET_TS_CTRL 0x08
+#define SET_STREAMING 0x08
extern struct dvb_frontend * dtt200u_fe_attach(struct dvb_usb_device *d);
#define USB_PID_HANFTEK_UMT_010_WARM 0x0015
#define USB_PID_DTT200U_COLD 0x0201
#define USB_PID_DTT200U_WARM 0x0301
+#define USB_PID_WT220U_COLD 0x0222
+#define USB_PID_WT220U_WARM 0x0221
#define USB_PID_WINTV_NOVA_T_USB2_COLD 0x9300
#define USB_PID_WINTV_NOVA_T_USB2_WARM 0x9301
#define USB_PID_NEBULA_DIGITV 0x0201
#define USB_PID_KYE_DVB_T_COLD 0x701e
#define USB_PID_KYE_DVB_T_WARM 0x701f
-
#endif
projects / linux-2.6 / commitdiff