]> err.no Git - linux-2.6/commitdiff
V4L/DVB (7926): ivtv: add support for the Buffalo PC-MV5L/PCI card.
authorHans Verkuil <hverkuil@xs4all.nl>
Tue, 20 May 2008 09:19:47 +0000 (06:19 -0300)
committerMauro Carvalho Chehab <mchehab@infradead.org>
Sun, 20 Jul 2008 10:06:42 +0000 (07:06 -0300)
Thanks to Peter Brandt for doing the necessary tests to fill out the card
definition!

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
drivers/media/video/ivtv/ivtv-cards.c
drivers/media/video/ivtv/ivtv-cards.h
drivers/media/video/ivtv/ivtv-driver.c

index 4fb8faefe2ced9f54d6c08bca9d8cdff42e10000..ba2b0cf4531b873d05e18d1cfb53135d5118c3f9 100644 (file)
@@ -1111,6 +1111,42 @@ static const struct ivtv_card ivtv_card_aver_m104 = {
        .i2c = &ivtv_i2c_std,
 };
 
+/* ------------------------------------------------------------------------- */
+
+/* Buffalo PC-MV5L/PCI cards */
+
+static const struct ivtv_card_pci_info ivtv_pci_buffalo[] = {
+       { PCI_DEVICE_ID_IVTV16, IVTV_PCI_ID_MELCO, 0x052b },
+       { 0, 0, 0 }
+};
+
+static const struct ivtv_card ivtv_card_buffalo = {
+       .type = IVTV_CARD_BUFFALO_MV5L,
+       .name = "Buffalo PC-MV5L/PCI",
+       .v4l2_capabilities = IVTV_CAP_ENCODER,
+       .hw_video = IVTV_HW_CX25840,
+       .hw_audio = IVTV_HW_CX25840,
+       .hw_audio_ctrl = IVTV_HW_CX25840,
+       .hw_all = IVTV_HW_CX25840 | IVTV_HW_TUNER,
+       .video_inputs = {
+               { IVTV_CARD_INPUT_VID_TUNER,  0, CX25840_COMPOSITE2 },
+               { IVTV_CARD_INPUT_SVIDEO1,    1,
+                       CX25840_SVIDEO_LUMA3 | CX25840_SVIDEO_CHROMA4 },
+               { IVTV_CARD_INPUT_COMPOSITE1, 1, CX25840_COMPOSITE1 },
+       },
+       .audio_inputs = {
+               { IVTV_CARD_INPUT_AUD_TUNER,  CX25840_AUDIO5       },
+               { IVTV_CARD_INPUT_LINE_IN1,   CX25840_AUDIO_SERIAL },
+       },
+       .gpio_init = { .direction = 0x1000, .initial_value = 0x1000 },
+       .xceive_pin = 12,
+       .tuners = {
+               { .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 },
+       },
+       .pci_list = ivtv_pci_buffalo,
+       .i2c = &ivtv_i2c_std,
+};
+
 static const struct ivtv_card *ivtv_card_list[] = {
        &ivtv_card_pvr250,
        &ivtv_card_pvr350,
@@ -1137,6 +1173,7 @@ static const struct ivtv_card *ivtv_card_list[] = {
        &ivtv_card_aver_pvr150,
        &ivtv_card_aver_ezmaker,
        &ivtv_card_aver_m104,
+       &ivtv_card_buffalo,
 
        /* Variations of standard cards but with the same PCI IDs.
           These cards must come last in this list. */
index 748485dcebbdab220009e3ac05c307b9adbf2d71..381af1bceef84c9924ee69b0c33f31a64a78820e 100644 (file)
@@ -49,7 +49,8 @@
 #define IVTV_CARD_AVER_PVR150PLUS    22 /* AVerMedia PVR-150 Plus */
 #define IVTV_CARD_AVER_EZMAKER       23 /* AVerMedia EZMaker PCI Deluxe */
 #define IVTV_CARD_AVER_M104          24 /* AverMedia M104 miniPCI card */
-#define IVTV_CARD_LAST                      24
+#define IVTV_CARD_BUFFALO_MV5L       25 /* Buffalo PC-MV5L/PCI card */
+#define IVTV_CARD_LAST                      25
 
 /* Variants of existing cards but with the same PCI IDs. The driver
    detects these based on other device information.
index bbe92d9dce36a2fb4a90f9ccc863a372808b8c38..323dd68fa1c6387068b41d7315b5db8f363d0b42 100644 (file)
@@ -191,6 +191,7 @@ MODULE_PARM_DESC(cardtype,
                 "\t\t\t23 = AverMedia PVR-150 Plus\n"
                 "\t\t\t24 = AverMedia EZMaker PCI Deluxe\n"
                 "\t\t\t25 = AverMedia M104 (not yet working)\n"
+                "\t\t\t26 = Buffalo PC-MV5L/PCI\n"
                 "\t\t\t 0 = Autodetect (default)\n"
                 "\t\t\t-1 = Ignore this card\n\t\t");
 MODULE_PARM_DESC(pal, "Set PAL standard: BGH, DK, I, M, N, Nc, 60");