]> err.no Git - linux-2.6/commitdiff
[MIPS] Sibyte: Finish conversion to modern time APIs.
authorRalf Baechle <ralf@linux-mips.org>
Fri, 19 Oct 2007 07:22:38 +0000 (08:22 +0100)
committerRalf Baechle <ralf@linux-mips.org>
Fri, 19 Oct 2007 17:15:58 +0000 (18:15 +0100)
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
arch/mips/sibyte/bcm1480/smp.c
arch/mips/sibyte/bcm1480/time.c
arch/mips/sibyte/sb1250/irq.c
arch/mips/sibyte/sb1250/smp.c
arch/mips/sibyte/sb1250/time.c
arch/mips/sibyte/swarm/setup.c

index 6eac36d1b8c893fcb1c56d16d1ba0808ce19e90d..02b266a31c467e44a717700d795bde4ed0d4116a 100644 (file)
@@ -69,8 +69,9 @@ void bcm1480_smp_init(void)
 
 void bcm1480_smp_finish(void)
 {
-       extern void bcm1480_time_init(void);
-       bcm1480_time_init();
+       extern void sb1480_clockevent_init(void);
+
+       sb1480_clockevent_init();
        local_irq_enable();
 }
 
index 5b4bfbbb5a24b053c9176cb1bec5860e894fdd8f..c730744aa474db7efb1bf48b7af13b904734761a 100644 (file)
@@ -27,9 +27,8 @@
  */
 #include <linux/clockchips.h>
 #include <linux/interrupt.h>
-#include <linux/sched.h>
+#include <linux/percpu.h>
 #include <linux/spinlock.h>
-#include <linux/kernel_stat.h>
 
 #include <asm/irq.h>
 #include <asm/addrspace.h>
@@ -101,25 +100,36 @@ static void sibyte_set_mode(enum clock_event_mode mode,
                break;
 
        case CLOCK_EVT_MODE_UNUSED:     /* shuddup gcc */
+       case CLOCK_EVT_MODE_RESUME:
                ;
        }
 }
 
-struct clock_event_device sibyte_hpt_clockevent = {
-       .name           = "bcm1480-counter",
-       .features       = CLOCK_EVT_FEAT_PERIODIC,
-       .set_mode       = sibyte_set_mode,
-       .shift          = 32,
-       .irq            = 0,
-};
+static int sibyte_next_event(unsigned long delta, struct clock_event_device *cd)
+{
+       unsigned int cpu = smp_processor_id();
+       void __iomem *timer_init;
+       unsigned int cnt;
+       int res;
+
+       timer_init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT));
+       cnt = __raw_readq(timer_init);
+       cnt += delta;
+       __raw_writeq(cnt, timer_init);
+       res = ((long)(__raw_readq(timer_init) - cnt ) > 0) ? -ETIME : 0;
+
+       return res;
+}
+
+static DEFINE_PER_CPU(struct clock_event_device, sibyte_hpt_clockevent);
 
 static irqreturn_t sibyte_counter_handler(int irq, void *dev_id)
 {
-       struct clock_event_device *cd = &sibyte_hpt_clockevent;
        unsigned int cpu = smp_processor_id();
+       struct clock_event_device *cd = &per_cpu(sibyte_hpt_clockevent, cpu);
 
        /* Reset the timer */
-       __raw_writeq(M_SCD_TIMER_ENABLE|M_SCD_TIMER_MODE_CONTINUOUS,
+       __raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
                     IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
        cd->event_handler(cd);
 
@@ -140,24 +150,21 @@ static struct irqaction sibyte_counter_irqaction = {
  * called directly from irq_handler.S when IP[4] is set during an
  * interrupt
  */
-static void __init sb1480_clockevent_init(void)
+void __cpuinit sb1480_clockevent_init(void)
 {
        unsigned int cpu = smp_processor_id();
        unsigned int irq = K_BCM1480_INT_TIMER_0 + cpu;
+       struct clock_event_device *cd = &per_cpu(sibyte_hpt_clockevent, cpu);
 
-       setup_irq(irq, &sibyte_counter_irqaction);
-}
+       cd->name                = "bcm1480-counter";
+       cd->features            = CLOCK_EVT_FEAT_PERIODIC |
+                                 CLOCK_EVT_MODE_ONESHOT;
+       cd->set_next_event      = sibyte_next_event;
+       cd->set_mode            = sibyte_set_mode;
+       cd->irq                 = irq;
+       clockevent_set_clock(cd, BCM1480_HPT_VALUE);
 
-void bcm1480_timer_interrupt(void)
-{
-       int cpu = smp_processor_id();
-       int irq = K_BCM1480_INT_TIMER_0 + cpu;
-
-       /* Reset the timer */
-       __raw_writeq(M_SCD_TIMER_ENABLE|M_SCD_TIMER_MODE_CONTINUOUS,
-             IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
-
-       ll_timer_interrupt(irq);
+       setup_irq(irq, &sibyte_counter_irqaction);
 }
 
 static cycle_t bcm1480_hpt_read(void)
@@ -168,9 +175,26 @@ static cycle_t bcm1480_hpt_read(void)
        return (jiffies + 1) * (BCM1480_HPT_VALUE / HZ) - count;
 }
 
+struct clocksource bcm1480_clocksource = {
+       .name   = "MIPS",
+       .rating = 200,
+       .read   = bcm1480_hpt_read,
+       .mask   = CLOCKSOURCE_MASK(32),
+       .shift  = 32,
+       .flags  = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+void __init sb1480_clocksource_init(void)
+{
+       struct clocksource *cs = &bcm1480_clocksource;
+
+       clocksource_set_clock(cs, BCM1480_HPT_VALUE);
+       clocksource_register(cs);
+}
+
 void __init bcm1480_hpt_setup(void)
 {
-       clocksource_mips.read = bcm1480_hpt_read;
        mips_hpt_frequency = BCM1480_HPT_VALUE;
+       sb1480_clocksource_init();
        sb1480_clockevent_init();
 }
index 7659174819c65720f0a3de051a416ac0dbcf533d..500d17e84c090bbf3e57616f72e9b1b28727fef0 100644 (file)
@@ -400,43 +400,11 @@ static void sb1250_kgdb_interrupt(void)
 
 #endif         /* CONFIG_KGDB */
 
-static inline void sb1250_timer_interrupt(void)
-{
-       int cpu = smp_processor_id();
-       int irq = K_INT_TIMER_0 + cpu;
-
-       irq_enter();
-       kstat_this_cpu.irqs[irq]++;
-
-       write_seqlock(&xtime_lock);
-
-       /* ACK interrupt */
-       ____raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
-                      IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
-
-       /*
-        * call the generic timer interrupt handling
-        */
-       do_timer(1);
-
-       write_sequnlock(&xtime_lock);
-
-       /*
-        * In UP mode, we call local_timer_interrupt() to do profiling
-        * and process accouting.
-        *
-        * In SMP mode, local_timer_interrupt() is invoked by appropriate
-        * low-level local timer interrupt handler.
-        */
-       local_timer_interrupt(irq);
-
-       irq_exit();
-}
-
 extern void sb1250_mailbox_interrupt(void);
 
 asmlinkage void plat_irq_dispatch(void)
 {
+       unsigned int cpu = smp_processor_id();
        unsigned int pending;
 
        /*
@@ -454,7 +422,7 @@ asmlinkage void plat_irq_dispatch(void)
        if (pending & CAUSEF_IP7) /* CPU performance counter interrupt */
                do_IRQ(MIPS_CPU_IRQ_BASE + 7);
        else if (pending & CAUSEF_IP4)
-               sb1250_timer_interrupt();
+               do_IRQ(K_INT_TIMER_0 + cpu);    /* sb1250_timer_interrupt() */
 
 #ifdef CONFIG_SMP
        else if (pending & CAUSEF_IP3)
index c38e1f34460d44847473d17f297af2f4a3a14d6b..aaa4f30dda7904dc9dae44a8844da0a303999b2c 100644 (file)
@@ -57,8 +57,9 @@ void sb1250_smp_init(void)
 
 void sb1250_smp_finish(void)
 {
-       extern void sb1250_time_init(void);
-       sb1250_time_init();
+       extern void sb1250_clockevent_init(void);
+
+       sb1250_clockevent_init();
        local_irq_enable();
 }
 
index fe11fed8e0d73e25857678d0c68746d9abb21887..9ef54628bc9c8eecac4203d31f004cc790b0d210 100644 (file)
@@ -100,6 +100,7 @@ static void sibyte_set_mode(enum clock_event_mode mode,
                break;
 
        case CLOCK_EVT_MODE_UNUSED:     /* shuddup gcc */
+       case CLOCK_EVT_MODE_RESUME:
                ;
        }
 }
@@ -144,79 +145,7 @@ static struct irqaction sibyte_irqaction = {
        .name           = "timer",
 };
 
-/*
- * The general purpose timer ticks at 1 Mhz independent if
- * the rest of the system
- */
-static void sibyte_set_mode(enum clock_event_mode mode,
-                           struct clock_event_device *evt)
-{
-       unsigned int cpu = smp_processor_id();
-       void __iomem *timer_cfg, *timer_init;
-
-       timer_cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
-       timer_init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT));
-
-       switch (mode) {
-       case CLOCK_EVT_MODE_PERIODIC:
-               __raw_writeq(0, timer_cfg);
-               __raw_writeq((V_SCD_TIMER_FREQ / HZ) - 1, timer_init);
-               __raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
-                            timer_cfg);
-               break;
-
-       case CLOCK_EVT_MODE_ONESHOT:
-               /* Stop the timer until we actually program a shot */
-       case CLOCK_EVT_MODE_SHUTDOWN:
-               __raw_writeq(0, timer_cfg);
-               break;
-
-       case CLOCK_EVT_MODE_UNUSED:     /* shuddup gcc */
-               ;
-       }
-}
-
-static int
-sibyte_next_event(unsigned long delta, struct clock_event_device *evt)
-{
-       unsigned int cpu = smp_processor_id();
-       void __iomem *timer_cfg, *timer_init;
-
-       timer_cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
-       timer_init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT));
-
-       __raw_writeq(0, timer_cfg);
-       __raw_writeq(delta, timer_init);
-       __raw_writeq(M_SCD_TIMER_ENABLE, timer_cfg);
-
-       return 0;
-}
-
-struct clock_event_device sibyte_hpt_clockevent = {
-       .name           = "sb1250-counter",
-       .features       = CLOCK_EVT_FEAT_PERIODIC,
-       .set_mode       = sibyte_set_mode,
-       .set_next_event = sibyte_next_event,
-       .shift          = 32,
-       .irq            = 0,
-};
-
-static irqreturn_t sibyte_counter_handler(int irq, void *dev_id)
-{
-       struct clock_event_device *cd = &sibyte_hpt_clockevent;
-
-       cd->event_handler(cd);
-
-       return IRQ_HANDLED;
-}
-
-static struct irqaction sibyte_irqaction = {
-       .handler        = sibyte_counter_handler,
-       .flags          = IRQF_DISABLED | IRQF_PERCPU,
-       .name           = "timer",
-};
-
-static void __init sb1250_clockevent_init(void)
+void __cpuinit sb1250_clockevent_init(void)
 {
        struct clock_event_device *cd = &sibyte_hpt_clockevent;
        unsigned int cpu = smp_processor_id();
@@ -249,12 +178,6 @@ static void __init sb1250_clockevent_init(void)
        clockevents_register_device(cd);
 }
 
-void __init plat_time_init(void)
-{
-       sb1250_clocksource_init();
-       sb1250_clockevent_init();
-}
-
 /*
  * The HPT is free running from SB1250_HPT_VALUE down to 0 then starts over
  * again.
@@ -267,3 +190,26 @@ static cycle_t sb1250_hpt_read(void)
 
        return SB1250_HPT_VALUE - count;
 }
+
+struct clocksource bcm1250_clocksource = {
+       .name   = "MIPS",
+       .rating = 200,
+       .read   = sb1250_hpt_read,
+       .mask   = CLOCKSOURCE_MASK(32),
+       .shift  = 32,
+       .flags  = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+void __init sb1250_clocksource_init(void)
+{
+       struct clocksource *cs = &bcm1250_clocksource;
+
+       clocksource_set_clock(cs, V_SCD_TIMER_FREQ);
+       clocksource_register(cs);
+}
+
+void __init plat_time_init(void)
+{
+       sb1250_clocksource_init();
+       sb1250_clockevent_init();
+}
index 8b3ef0e4cd555c735bf3cfe60c5a42110fc0ac9e..080c966263b701aa608bb536f8147803aa11fc41 100644 (file)
@@ -69,31 +69,6 @@ const char *get_system_type(void)
        return "SiByte " SIBYTE_BOARD_NAME;
 }
 
-void __init plat_time_init(void)
-{
-#if defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X)
-       /* Setup HPT */
-       sb1250_hpt_setup();
-#endif
-}
-
-void __init plat_timer_setup(struct irqaction *irq)
-{
-        /*
-         * we don't set up irqaction, because we will deliver timer
-         * interrupts through low-level (direct) meachanism.
-         */
-
-        /* We only need to setup the generic timer */
-#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
-       bcm1480_time_init();
-#elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X)
-       sb1250_time_init();
-#else
-#error invalid SiByte board configuration
-#endif
-}
-
 int swarm_be_handler(struct pt_regs *regs, int is_fixup)
 {
        if (!is_fixup && (regs->cp0_cause & 4)) {