* Copyright (C) 2006 Aapo Tahkola (aet@rasterburn.org)
*
* This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation, version 2.
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation, version 2.
*
* see Documentation/dvb/README.dvb-usb for more information
*/
{ 0x0, 0x1e, KEY_VOLUMEUP },
};
-static inline int m9206_read(struct usb_device *udev, u8 request, u16 value,\
+static inline int m9206_read(struct usb_device *udev, u8 request, u16 value,
u16 index, void *data, int size)
{
int ret;
if (d->props.rc_query) {
deb_rc("Initialising remote control\n");
while (rc_seq->address) {
- if ((ret = m9206_write(d->udev, M9206_CORE, rc_seq->data, rc_seq->address)) != 0) {
+ if ((ret = m9206_write(d->udev, M9206_CORE,
+ rc_seq->data,
+ rc_seq->address)) != 0) {
deb_rc("Initialising remote control failed\n");
return ret;
}
int i, ret = 0;
u8 rc_state[2];
- if ((ret = m9206_read(d->udev, M9206_CORE, 0x0, M9206_RC_STATE, rc_state, 1)) != 0)
+ if ((ret = m9206_read(d->udev, M9206_CORE, 0x0, M9206_RC_STATE,
+ rc_state, 1)) != 0)
goto unlock;
- if ((ret = m9206_read(d->udev, M9206_CORE, 0x0, M9206_RC_KEY, rc_state + 1, 1)) != 0)
+ if ((ret = m9206_read(d->udev, M9206_CORE, 0x0, M9206_RC_KEY,
+ rc_state + 1, 1)) != 0)
goto unlock;
for (i = 0; i < d->props.rc_key_map_size; i++)
goto unlock;
default:
- deb_rc("Unexpected rc state %02x\n", rc_state[0]);
+ deb_rc("Unexpected rc state %02x\n",
+ rc_state[0]);
*state = REMOTE_NO_KEY_PRESSED;
goto unlock;
}
*state = REMOTE_NO_KEY_PRESSED;
- unlock:
+ unlock:
return ret;
}
return -EAGAIN;
for (i = 0; i < num; i++) {
- if (msg[i].flags & (I2C_M_NO_RD_ACK|I2C_M_IGNORE_NAK|I2C_M_TEN) ||
- msg[i].len == 0) {
- /* For a 0 byte message, I think sending the address to index 0x80|0x40
- * would be the correct thing to do. However, zero byte messages are
- * only used for probing, and since we don't know how to get the slave's
- * ack, we can't probe. */
+ if (msg[i].flags & (I2C_M_NO_RD_ACK | I2C_M_IGNORE_NAK |
+ I2C_M_TEN) || msg[i].len == 0) {
+ /* For a 0 byte message, I think sending the address
+ * to index 0x80|0x40 would be the correct thing to
+ * do. However, zero byte messages are only used for
+ * probing, and since we don't know how to get the
+ * slave's ack, we can't probe. */
ret = -ENOTSUPP;
goto unlock;
}
/* Send START & address/RW bit */
if (!(msg[i].flags & I2C_M_NOSTART)) {
- if ((ret = m9206_write(d->udev, M9206_I2C, (msg[i].addr<<1)|(msg[i].flags&I2C_M_RD?0x01:0), 0x80)) != 0)
+ if ((ret = m9206_write(d->udev, M9206_I2C,
+ (msg[i].addr << 1) |
+ (msg[i].flags & I2C_M_RD ? 0x01 : 0),
+ 0x80)) != 0)
goto unlock;
/* Should check for ack here, if we knew how. */
}
if (msg[i].flags & I2C_M_RD) {
for (j = 0; j < msg[i].len; j++) {
- /* Last byte of transaction? Send STOP, otherwise send ACK. */
- int stop = (i+1 == num && j+1 == msg[i].len)?0x40:0x01;
- if ((ret = m9206_read(d->udev, M9206_I2C, 0x0, 0x20|stop, &msg[i].buf[j], 1)) != 0)
+ /* Last byte of transaction?
+ * Send STOP, otherwise send ACK. */
+ int stop = (i+1 == num && j+1 == msg[i].len)
+ ? 0x40 : 0x01;
+
+ if ((ret = m9206_read(d->udev, M9206_I2C, 0x0,
+ 0x20|stop,
+ &msg[i].buf[j], 1)) != 0)
goto unlock;
}
} else {
for (j = 0; j < msg[i].len; j++) {
/* Last byte of transaction? Then send STOP. */
- int stop = (i+1 == num && j+1 == msg[i].len)?0x40:0x00;
- if ((ret = m9206_write(d->udev, M9206_I2C, msg[i].buf[j], stop)) != 0)
+ int stop = (i+1 == num && j+1 == msg[i].len)
+ ? 0x40 : 0x00;
+
+ if ((ret = m9206_write(d->udev, M9206_I2C,
+ msg[i].buf[j],
+ stop)) != 0)
goto unlock;
/* Should check for ack here too. */
}
}
ret = num;
-unlock:
+ unlock:
mutex_unlock(&d->i2c_mutex);
return ret;
};
-static int m9206_set_filter(struct dvb_usb_adapter *adap, int type, int idx,
- int pid)
+static int m9206_set_filter(struct dvb_usb_adapter *adap,
+ int type, int idx, int pid)
{
int ret = 0;
pid |= 0x8000;
- if ((ret = m9206_write(adap->dev->udev, M9206_FILTER, pid, (type << 8) | (idx * 4) )) != 0)
+ if ((ret = m9206_write(adap->dev->udev, M9206_FILTER, pid,
+ (type << 8) | (idx * 4) )) != 0)
return ret;
- if ((ret = m9206_write(adap->dev->udev, M9206_FILTER, 0, (type << 8) | (idx * 4) )) != 0)
+ if ((ret = m9206_write(adap->dev->udev, M9206_FILTER, 0,
+ (type << 8) | (idx * 4) )) != 0)
return ret;
return ret;
if (m->filters[i] == 0)
continue;
- if ((ret = m9206_set_filter(adap, 0x81, filter + 2, m->filters[i])) != 0)
+ if ((ret = m9206_set_filter(adap, 0x81, filter + 2,
+ m->filters[i])) != 0)
return ret;
filter++;
return m9206_update_filters(adap);
}
-static int m9206_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid,
- int onoff)
+static int m9206_pid_filter(struct dvb_usb_adapter *adap,
+ int index, u16 pid, int onoff)
{
struct m9206_state *m = adap->dev->priv;
(void) m9206_write(udev, M9206_CORE, 0x01, M9206_FW_GO);
deb_rc("firmware uploaded!\n");
- done:
+ done:
kfree(buff);
return ret;
{
deb_rc("megasky_frontend_attach!\n");
- if ((adap->fe = dvb_attach(mt352_attach, &megasky_mt352_config, &adap->dev->i2c_adap)) == NULL)
+ if ((adap->fe = dvb_attach(mt352_attach, &megasky_mt352_config,
+ &adap->dev->i2c_adap)) == NULL)
return -EIO;
return 0;
{
deb_rc("tvwalkertwin_0_tda10046_frontend_attach!\n");
- if ((adap->fe = dvb_attach(tda10046_attach, &tvwalkertwin_0_tda10046_config, &adap->dev->i2c_adap)) == NULL)
+ if ((adap->fe = dvb_attach(tda10046_attach,
+ &tvwalkertwin_0_tda10046_config,
+ &adap->dev->i2c_adap)) == NULL)
return -EIO;
- deb_rc("Attached demod 0 at address %02x\n", tvwalkertwin_0_tda10046_config.demod_address);
+ deb_rc("Attached demod 0 at address %02x\n",
+ tvwalkertwin_0_tda10046_config.demod_address);
return 0;
}
{
deb_rc("tvwalkertwin_1_tda10046_frontend_attach!\n");
- if ((adap->fe = dvb_attach(tda10046_attach, &tvwalkertwin_1_tda10046_config, &adap->dev->i2c_adap)) == NULL)
+ if ((adap->fe = dvb_attach(tda10046_attach,
+ &tvwalkertwin_1_tda10046_config,
+ &adap->dev->i2c_adap)) == NULL)
return -EIO;
- deb_rc("Attached demod 1 at address %02x\n", tvwalkertwin_1_tda10046_config.demod_address);
+ deb_rc("Attached demod 1 at address %02x\n",
+ tvwalkertwin_1_tda10046_config.demod_address);
return 0;
}
static struct dvb_usb_device_properties digivox_mini_ii_properties;
static struct dvb_usb_device_properties tvwalkertwin_properties;
static struct dvb_usb_device_properties dposh_properties;
+
static struct m9206_inits megasky_rc_init [];
static struct m9206_inits tvwalkertwin_rc_init [];
*/
if ((ret = dvb_usb_device_init(intf, &megasky_properties,
- THIS_MODULE, &d)) == 0) {
+ THIS_MODULE, &d)) == 0) {
rc_init_seq = megasky_rc_init;
goto found;
}
if ((ret = dvb_usb_device_init(intf,
- &digivox_mini_ii_properties, THIS_MODULE, &d)) == 0) {
+ &digivox_mini_ii_properties,
+ THIS_MODULE, &d)) == 0) {
/* No remote control, so no rc_init_seq */
goto found;
}
/* This configures both tuners on the TV Walker Twin */
if ((ret = dvb_usb_device_init(intf, &tvwalkertwin_properties,
- THIS_MODULE, &d)) == 0) {
+ THIS_MODULE, &d)) == 0) {
rc_init_seq = tvwalkertwin_rc_init;
goto found;
}
- if ((ret = dvb_usb_device_init(intf, &dposh_properties, THIS_MODULE, &d)) == 0) {
+ if ((ret = dvb_usb_device_init(intf, &dposh_properties,
+ THIS_MODULE, &d)) == 0) {
/* Remote controller not supported yet. */
goto found;
}
.num_adapters = 1,
.adapter = {{
.caps = DVB_USB_ADAP_HAS_PID_FILTER |
- DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+ DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
.pid_filter_count = 8,
.pid_filter = m9206_pid_filter,
.identify_state = m920x_identify_state,
.num_adapters = 2,
- .adapter = {
- {
- .caps = DVB_USB_ADAP_HAS_PID_FILTER |
- DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
-
- .pid_filter_count = 8,
- .pid_filter = m9206_pid_filter,
- .pid_filter_ctrl = m9206_pid_filter_ctrl,
-
- .frontend_attach = tvwalkertwin_0_tda10046_frontend_attach,
- .tuner_attach = tvwalkertwin_0_tda8275_tuner_attach,
-
- .stream = {
- .type = USB_BULK,
- .count = 8,
- .endpoint = 0x81,
- .u = {
- .bulk = {
- .buffersize = 512,
- }
- }
- },
+ .adapter = {{
+ .caps = DVB_USB_ADAP_HAS_PID_FILTER |
+ DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+
+ .pid_filter_count = 8,
+ .pid_filter = m9206_pid_filter,
+ .pid_filter_ctrl = m9206_pid_filter_ctrl,
+
+ .frontend_attach = tvwalkertwin_0_tda10046_frontend_attach,
+ .tuner_attach = tvwalkertwin_0_tda8275_tuner_attach,
+
+ .stream = {
+ .type = USB_BULK,
+ .count = 8,
+ .endpoint = 0x81,
+ .u = {
+ .bulk = {
+ .buffersize = 512,
+ }
+ }
+ }},{
+ .caps = DVB_USB_ADAP_HAS_PID_FILTER |
+ DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+
+ .pid_filter_count = 8,
+ .pid_filter = m9206_pid_filter,
+ .pid_filter_ctrl = m9206_pid_filter_ctrl,
+
+ .frontend_attach = tvwalkertwin_1_tda10046_frontend_attach,
+ .tuner_attach = tvwalkertwin_1_tda8275_tuner_attach,
+
+ .stream = {
+ .type = USB_BULK,
+ .count = 8,
+ .endpoint = 0x82,
+ .u = {
+ .bulk = {
+ .buffersize = 512,
+ }
+ }
},
- {
- .caps = DVB_USB_ADAP_HAS_PID_FILTER |
- DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
-
- .pid_filter_count = 8,
- .pid_filter = m9206_pid_filter,
- .pid_filter_ctrl = m9206_pid_filter_ctrl,
-
- .frontend_attach = tvwalkertwin_1_tda10046_frontend_attach,
- .tuner_attach = tvwalkertwin_1_tda8275_tuner_attach,
-
- .stream = {
- .type = USB_BULK,
- .count = 8,
- .endpoint = 0x82,
- .u = {
- .bulk = {
- .buffersize = 512,
- }
- }
- },
- }
- },
+ }},
.i2c_algo = &m9206_i2c_algo,
.num_device_descs = 1,
.firmware = "dvb-usb-dposh-01.fw",
.download_firmware = m9206_firmware_download,
- /* Remote controller not supported yet. */
-
.size_of_priv = sizeof(struct m9206_state),
.identify_state = m920x_identify_state,
.num_adapters = 1,
.adapter = {{
- /* Nardware pid filters don't work with this device/firmware. */
-
- .frontend_attach = megasky_mt352_frontend_attach,
- .tuner_attach = megasky_qt1010_tuner_attach,
-
- .stream = {
- .type = USB_BULK,
- .count = 8,
- .endpoint = 0x81,
- .u = {
- .bulk = {
- .buffersize = 512,
- }
- }
- },
- }},
+ /* Hardware pid filters don't work with this device/firmware */
+
+ .frontend_attach = megasky_mt352_frontend_attach,
+ .tuner_attach = megasky_qt1010_tuner_attach,
+
+ .stream = {
+ .type = USB_BULK,
+ .count = 8,
+ .endpoint = 0x81,
+ .u = {
+ .bulk = {
+ .buffersize = 512,
+ }
+ }
+ },
+ }},
.i2c_algo = &m9206_i2c_algo,
.num_device_descs = 1,
projects / linux-2.6 / commitdiff