*/
#include "dvb-usb-common.h"
-#include <linux/firmware.h>
#include <linux/usb.h>
struct usb_cypress_controller {
};
static struct usb_cypress_controller cypress[] = {
- { .id = CYPRESS_AN2135, .name = "Cypress AN2135", .cpu_cs_register = 0x7f92 },
- { .id = CYPRESS_AN2235, .name = "Cypress AN2235", .cpu_cs_register = 0x7f92 },
- { .id = CYPRESS_FX2, .name = "Cypress FX2", .cpu_cs_register = 0xe600 },
+ { .id = DEVICE_SPECIFIC, .name = "Device specific", .cpu_cs_register = 0 },
+ { .id = CYPRESS_AN2135, .name = "Cypress AN2135", .cpu_cs_register = 0x7f92 },
+ { .id = CYPRESS_AN2235, .name = "Cypress AN2235", .cpu_cs_register = 0x7f92 },
+ { .id = CYPRESS_FX2, .name = "Cypress FX2", .cpu_cs_register = 0xe600 },
};
/*
0xa0, USB_TYPE_VENDOR, addr, 0x00, data, len, 5*HZ);
}
-int usb_cypress_load_firmware(struct usb_device *udev, const char *filename, int type)
+static int usb_cypress_load_firmware(struct usb_device *udev, const struct firmware *fw, int type)
{
- const struct firmware *fw = NULL;
- u16 addr;
- u8 *b,*p;
- int ret = 0,i;
+ struct hexline hx;
+ u8 reset;
+ int ret,pos=0;
- if ((ret = request_firmware(&fw, filename, &udev->dev)) != 0) {
- err("did not find the firmware file. (%s) "
- "Please see linux/Documentation/dvb/ for more details on firmware-problems.",
- filename);
+ /* stop the CPU */
+ reset = 1;
+ if ((ret = usb_cypress_writemem(udev,cypress[type].cpu_cs_register,&reset,1)) != 1)
+ err("could not stop the USB controller CPU.");
+
+ while ((ret = dvb_usb_get_hexline(fw,&hx,&pos)) > 0) {
+ deb_fw("writing to address 0x%04x (buffer: 0x%02x %02x)\n",hx.addr,hx.len,hx.chk);
+ ret = usb_cypress_writemem(udev,hx.addr,hx.data,hx.len);
+
+ if (ret != hx.len) {
+ err("error while transferring firmware "
+ "(transferred size: %d, block size: %d)",
+ ret,hx.len);
+ ret = -EINVAL;
+ break;
+ }
+ }
+ if (ret < 0) {
+ err("firmware download failed at %d with %d",pos,ret);
return ret;
}
- info("downloading firmware from file '%s' to the '%s'",filename,cypress[type].name);
-
- p = kmalloc(fw->size,GFP_KERNEL);
- if (p != NULL) {
- u8 reset;
- /*
- * you cannot use the fw->data as buffer for
- * usb_control_msg, a new buffer has to be
- * created
- */
- memcpy(p,fw->data,fw->size);
-
- /* stop the CPU */
- reset = 1;
- if ((ret = usb_cypress_writemem(udev,cypress[type].cpu_cs_register,&reset,1)) != 1)
- err("could not stop the USB controller CPU.");
- for(i = 0; p[i+3] == 0 && i < fw->size; ) {
- b = (u8 *) &p[i];
- addr = cpu_to_le16( *((u16 *) &b[1]) );
-
- deb_fw("writing to address 0x%04x (buffer: 0x%02x%02x)\n",addr,b[1],b[2]);
-
- ret = usb_cypress_writemem(udev,addr,&b[4],b[0]);
-
- if (ret != b[0]) {
- err("error while transferring firmware "
- "(transferred size: %d, block size: %d)",
- ret,b[0]);
- ret = -EINVAL;
- break;
- }
- i += 5 + b[0];
- }
- /* length in ret */
- if (ret > 0)
- ret = 0;
+ if (ret == 0) {
/* restart the CPU */
reset = 0;
if (ret || usb_cypress_writemem(udev,cypress[type].cpu_cs_register,&reset,1) != 1) {
err("could not restart the USB controller CPU.");
ret = -EINVAL;
}
+ } else
+ ret = -EIO;
- kfree(p);
- } else {
- ret = -ENOMEM;
+ return ret;
+}
+
+int dvb_usb_download_firmware(struct usb_device *udev, struct dvb_usb_properties *props)
+{
+ int ret;
+ const struct firmware *fw = NULL;
+
+ if ((ret = request_firmware(&fw, props->firmware, &udev->dev)) != 0) {
+ err("did not find the firmware file. (%s) "
+ "Please see linux/Documentation/dvb/ for more details on firmware-problems. (%d)",
+ props->firmware,ret);
+ return ret;
}
- release_firmware(fw);
+ info("downloading firmware from file '%s'",props->firmware);
+
+ switch (props->usb_ctrl) {
+ case CYPRESS_AN2135:
+ case CYPRESS_AN2235:
+ case CYPRESS_FX2:
+ ret = usb_cypress_load_firmware(udev, fw, props->usb_ctrl);
+ break;
+ case DEVICE_SPECIFIC:
+ if (props->download_firmware)
+ ret = props->download_firmware(udev,fw);
+ else {
+ err("BUG: driver didn't specified a download_firmware-callback, although it claims to have a DEVICE_SPECIFIC one.");
+ ret = -EINVAL;
+ }
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+ release_firmware(fw);
return ret;
}
+
+int dvb_usb_get_hexline(const struct firmware *fw, struct hexline *hx, int *pos)
+{
+ u8 *b = (u8 *) &fw->data[*pos];
+ int data_offs = 4;
+ if (*pos >= fw->size)
+ return 0;
+
+ memset(hx,0,sizeof(struct hexline));
+
+ hx->len = b[0];
+
+ if ((*pos + hx->len + 4) >= fw->size)
+ return -EINVAL;
+
+ hx->addr = le16_to_cpu( *((u16 *) &b[1]) );
+ hx->type = b[3];
+
+ if (hx->type == 0x04) {
+ /* b[4] and b[5] are the Extended linear address record data field */
+ hx->addr |= (b[4] << 24) | (b[5] << 16);
+/* hx->len -= 2;
+ data_offs += 2; */
+ }
+ memcpy(hx->data,&b[data_offs],hx->len);
+ hx->chk = b[hx->len + data_offs];
+
+ *pos += hx->len + 5;
+
+ return *pos;
+}
+EXPORT_SYMBOL(dvb_usb_get_hexline);
+
if (cold) {
info("found a '%s' in cold state, will try to load a firmware",desc->name);
- ret = usb_cypress_load_firmware(udev,props->firmware,props->usb_ctrl);
- } else {
- info("found a '%s' in warm state.",desc->name);
- d = kmalloc(sizeof(struct dvb_usb_device),GFP_KERNEL);
- if (d == NULL) {
- err("no memory for 'struct dvb_usb_device'");
+ ret = dvb_usb_download_firmware(udev,props);
+ if (!props->no_reconnect)
return ret;
+ }
+
+ info("found a '%s' in warm state.",desc->name);
+ d = kmalloc(sizeof(struct dvb_usb_device),GFP_KERNEL);
+ if (d == NULL) {
+ err("no memory for 'struct dvb_usb_device'");
+ return ret;
+ }
+ memset(d,0,sizeof(struct dvb_usb_device));
+
+ d->udev = udev;
+ memcpy(&d->props,props,sizeof(struct dvb_usb_properties));
+ d->desc = desc;
+ d->owner = owner;
+
+ if (d->props.size_of_priv > 0) {
+ d->priv = kmalloc(d->props.size_of_priv,GFP_KERNEL);
+ if (d->priv == NULL) {
+ err("no memory for priv in 'struct dvb_usb_device'");
+ kfree(d);
+ return -ENOMEM;
}
- memset(d,0,sizeof(struct dvb_usb_device));
-
- d->udev = udev;
- memcpy(&d->props,props,sizeof(struct dvb_usb_properties));
- d->desc = desc;
- d->owner = owner;
-
- if (d->props.size_of_priv > 0) {
- d->priv = kmalloc(d->props.size_of_priv,GFP_KERNEL);
- if (d->priv == NULL) {
- err("no memory for priv in 'struct dvb_usb_device'");
- kfree(d);
- return -ENOMEM;
- }
- memset(d->priv,0,d->props.size_of_priv);
- }
+ memset(d->priv,0,d->props.size_of_priv);
+ }
- usb_set_intfdata(intf, d);
+ usb_set_intfdata(intf, d);
- if (du != NULL)
- *du = d;
+ if (du != NULL)
+ *du = d;
- ret = dvb_usb_init(d);
- }
+ ret = dvb_usb_init(d);
if (ret == 0)
info("%s successfully initialized and connected.",desc->name);
#include <linux/input.h>
#include <linux/module.h>
#include <linux/usb.h>
+#include <linux/firmware.h>
#include "dvb_frontend.h"
#include "dvb_demux.h"
* @usb_ctrl: which USB device-side controller is in use. Needed for firmware
* download.
* @firmware: name of the firmware file.
- *
+ * @download_firmware: called to download the firmware when the usb_ctrl is
+ * DEVICE_SPECIFIC.
+ * @no_reconnect: device doesn't do a reconnect after downloading the firmware,
+ so do the warm initialization right after it
+
* @size_of_priv: how many bytes shall be allocated for the private field
* of struct dvb_usb_device.
*
int caps;
int pid_filter_count;
-#define CYPRESS_AN2135 0
-#define CYPRESS_AN2235 1
-#define CYPRESS_FX2 2
+#define DEVICE_SPECIFIC 0
+#define CYPRESS_AN2135 1
+#define CYPRESS_AN2235 2
+#define CYPRESS_FX2 3
int usb_ctrl;
- const char *firmware;
+ const char firmware[FIRMWARE_NAME_MAX];
+ int (*download_firmware) (struct usb_device *, const struct firmware *);
+ int no_reconnect;
int size_of_priv;
extern int dvb_usb_pll_set(struct dvb_frontend *, struct dvb_frontend_parameters *, u8[]);
extern int dvb_usb_pll_set_i2c(struct dvb_frontend *, struct dvb_frontend_parameters *);
+/* commonly used firmware download types and function */
+struct hexline {
+ u8 len;
+ u32 addr;
+ u8 type;
+ u8 data[255];
+ u8 chk;
+};
+extern int dvb_usb_get_hexline(const struct firmware *, struct hexline *, int *);
#endif
projects / linux-2.6 / commitdiff