* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*
- * $Id: ib_mad.h 1389 2004-12-27 22:56:47Z roland $
+ * $Id: ib_mad.h 2775 2005-07-02 13:42:12Z halr $
*/
#if !defined( IB_MAD_H )
#define IB_MGMT_CLASS_VENDOR_RANGE2_START 0x30
#define IB_MGMT_CLASS_VENDOR_RANGE2_END 0x4F
+#define IB_OPENIB_OUI (0x001405)
+
/* Management methods */
#define IB_MGMT_METHOD_GET 0x01
#define IB_MGMT_METHOD_SET 0x02
#define IB_MGMT_MAX_METHODS 128
+/* RMPP information */
+#define IB_MGMT_RMPP_VERSION 1
+
+#define IB_MGMT_RMPP_TYPE_DATA 1
+#define IB_MGMT_RMPP_TYPE_ACK 2
+#define IB_MGMT_RMPP_TYPE_STOP 3
+#define IB_MGMT_RMPP_TYPE_ABORT 4
+
+#define IB_MGMT_RMPP_FLAG_ACTIVE 1
+#define IB_MGMT_RMPP_FLAG_FIRST (1<<1)
+#define IB_MGMT_RMPP_FLAG_LAST (1<<2)
+
+#define IB_MGMT_RMPP_NO_RESPTIME 0x1F
+
+#define IB_MGMT_RMPP_STATUS_SUCCESS 0
+#define IB_MGMT_RMPP_STATUS_RESX 1
+#define IB_MGMT_RMPP_STATUS_T2L 118
+#define IB_MGMT_RMPP_STATUS_BAD_LEN 119
+#define IB_MGMT_RMPP_STATUS_BAD_SEG 120
+#define IB_MGMT_RMPP_STATUS_BADT 121
+#define IB_MGMT_RMPP_STATUS_W2S 122
+#define IB_MGMT_RMPP_STATUS_S2B 123
+#define IB_MGMT_RMPP_STATUS_BAD_STATUS 124
+#define IB_MGMT_RMPP_STATUS_UNV 125
+#define IB_MGMT_RMPP_STATUS_TMR 126
+#define IB_MGMT_RMPP_STATUS_UNSPEC 127
+
#define IB_QP0 0
#define IB_QP1 __constant_htonl(1)
#define IB_QP1_QKEY 0x80010000
u16 attr_id;
u16 resv;
u32 attr_mod;
-} __attribute__ ((packed));
+};
struct ib_rmpp_hdr {
u8 rmpp_version;
u8 rmpp_status;
u32 seg_num;
u32 paylen_newwin;
+};
+
+typedef u64 __bitwise ib_sa_comp_mask;
+
+#define IB_SA_COMP_MASK(n) ((__force ib_sa_comp_mask) cpu_to_be64(1ull << n))
+
+/*
+ * ib_sa_hdr and ib_sa_mad structures must be packed because they have
+ * 64-bit fields that are only 32-bit aligned. 64-bit architectures will
+ * lay them out wrong otherwise. (And unfortunately they are sent on
+ * the wire so we can't change the layout)
+ */
+struct ib_sa_hdr {
+ u64 sm_key;
+ u16 attr_offset;
+ u16 reserved;
+ ib_sa_comp_mask comp_mask;
} __attribute__ ((packed));
struct ib_mad {
struct ib_mad_hdr mad_hdr;
u8 data[232];
-} __attribute__ ((packed));
+};
struct ib_rmpp_mad {
struct ib_mad_hdr mad_hdr;
struct ib_rmpp_hdr rmpp_hdr;
u8 data[220];
+};
+
+struct ib_sa_mad {
+ struct ib_mad_hdr mad_hdr;
+ struct ib_rmpp_hdr rmpp_hdr;
+ struct ib_sa_hdr sa_hdr;
+ u8 data[200];
} __attribute__ ((packed));
struct ib_vendor_mad {
u8 reserved;
u8 oui[3];
u8 data[216];
-} __attribute__ ((packed));
+};
/**
* ib_mad_send_buf - MAD data buffer and work request for sends.
struct ib_sge sge;
};
+/**
+ * ib_get_rmpp_resptime - Returns the RMPP response time.
+ * @rmpp_hdr: An RMPP header.
+ */
+static inline u8 ib_get_rmpp_resptime(struct ib_rmpp_hdr *rmpp_hdr)
+{
+ return rmpp_hdr->rmpp_rtime_flags >> 3;
+}
+
+/**
+ * ib_get_rmpp_flags - Returns the RMPP flags.
+ * @rmpp_hdr: An RMPP header.
+ */
+static inline u8 ib_get_rmpp_flags(struct ib_rmpp_hdr *rmpp_hdr)
+{
+ return rmpp_hdr->rmpp_rtime_flags & 0x7;
+}
+
+/**
+ * ib_set_rmpp_resptime - Sets the response time in an RMPP header.
+ * @rmpp_hdr: An RMPP header.
+ * @rtime: The response time to set.
+ */
+static inline void ib_set_rmpp_resptime(struct ib_rmpp_hdr *rmpp_hdr, u8 rtime)
+{
+ rmpp_hdr->rmpp_rtime_flags = ib_get_rmpp_flags(rmpp_hdr) | (rtime << 3);
+}
+
+/**
+ * ib_set_rmpp_flags - Sets the flags in an RMPP header.
+ * @rmpp_hdr: An RMPP header.
+ * @flags: The flags to set.
+ */
+static inline void ib_set_rmpp_flags(struct ib_rmpp_hdr *rmpp_hdr, u8 flags)
+{
+ rmpp_hdr->rmpp_rtime_flags = (rmpp_hdr->rmpp_rtime_flags & 0xF1) |
+ (flags & 0x7);
+}
+
struct ib_mad_agent;
struct ib_mad_send_wc;
struct ib_mad_recv_wc;
* ib_mad_agent - Used to track MAD registration with the access layer.
* @device: Reference to device registration is on.
* @qp: Reference to QP used for sending and receiving MADs.
+ * @mr: Memory region for system memory usable for DMA.
* @recv_handler: Callback handler for a received MAD.
* @send_handler: Callback handler for a sent MAD.
* @snoop_handler: Callback handler for snooped sent MADs.
* Unsolicited MADs sent by this client will have the upper 32-bits
* of their TID set to this value.
* @port_num: Port number on which QP is registered
+ * @rmpp_version: If set, indicates the RMPP version used by this agent.
*/
struct ib_mad_agent {
struct ib_device *device;
void *context;
u32 hi_tid;
u8 port_num;
+ u8 rmpp_version;
};
/**
* ib_mad_recv_wc - received MAD information.
* @wc: Completion information for the received data.
* @recv_buf: Specifies the location of the received data buffer(s).
+ * @rmpp_list: Specifies a list of RMPP reassembled received MAD buffers.
* @mad_len: The length of the received MAD, without duplicated headers.
*
* For received response, the wr_id field of the wc is set to the wr_id
struct ib_mad_recv_wc {
struct ib_wc *wc;
struct ib_mad_recv_buf recv_buf;
+ struct list_head rmpp_list;
int mad_len;
};
* @bad_send_wr: Specifies the MAD on which an error was encountered.
*
* Sent MADs are not guaranteed to complete in the order that they were posted.
+ *
+ * If the MAD requires RMPP, the data buffer should contain a single copy
+ * of the common MAD, RMPP, and class specific headers, followed by the class
+ * defined data. If the class defined data would not divide evenly into
+ * RMPP segments, then space must be allocated at the end of the referenced
+ * buffer for any required padding. To indicate the amount of class defined
+ * data being transferred, the paylen_newwin field in the RMPP header should
+ * be set to the size of the class specific header plus the amount of class
+ * defined data being transferred. The paylen_newwin field should be
+ * specified in network-byte order.
*/
int ib_post_send_mad(struct ib_mad_agent *mad_agent,
struct ib_send_wr *send_wr,
* referenced buffer should be at least the size of the mad_len specified
* by @mad_recv_wc.
*
- * This call copies a chain of received RMPP MADs into a single data buffer,
+ * This call copies a chain of received MAD segments into a single data buffer,
* removing duplicated headers.
*/
void ib_coalesce_recv_mad(struct ib_mad_recv_wc *mad_recv_wc, void *buf);
/**
- * ib_free_recv_mad - Returns data buffers used to receive a MAD to the
- * access layer.
+ * ib_free_recv_mad - Returns data buffers used to receive a MAD.
* @mad_recv_wc: Work completion information for a received MAD.
*
* Clients receiving MADs through their ib_mad_recv_handler must call this
* @pkey_index: Specifies which PKey the MAD will be sent using. This field
* is valid only if the remote_qpn is QP 1.
* @ah: References the address handle used to transfer to the remote node.
+ * @rmpp_active: Indicates if the send will enable RMPP.
* @hdr_len: Indicates the size of the data header of the MAD. This length
* should include the common MAD header, RMPP header, plus any class
* specific header.
- * @data_len: Indicates the size of any user-transfered data. The call will
+ * @data_len: Indicates the size of any user-transferred data. The call will
* automatically adjust the allocated buffer size to account for any
* additional padding that may be necessary.
* @gfp_mask: GFP mask used for the memory allocation.
* This is a helper routine that may be used to allocate a MAD. Users are
* not required to allocate outbound MADs using this call. The returned
* MAD send buffer will reference a data buffer usable for sending a MAD, along
- * with an intialized work request structure.
+ * with an initialized work request structure. Users may modify the returned
+ * MAD data buffer or work request before posting the send.
+ *
+ * The returned data buffer will be cleared. Users are responsible for
+ * initializing the common MAD and any class specific headers. If @rmpp_active
+ * is set, the RMPP header will be initialized for sending.
*/
struct ib_mad_send_buf * ib_create_send_mad(struct ib_mad_agent *mad_agent,
u32 remote_qpn, u16 pkey_index,
- struct ib_ah *ah,
+ struct ib_ah *ah, int rmpp_active,
int hdr_len, int data_len,
unsigned int __nocast gfp_mask);
projects / linux-2.6 / commitdiff