]> err.no Git - linux-2.6/commitdiff
rtl8187: updating rtl818x.h to support RTL8187B
authorHin-Tak Leung <hintak.leung@gmail.com>
Tue, 8 Jul 2008 11:30:02 +0000 (12:30 +0100)
committerJohn W. Linville <linville@tuxdriver.com>
Tue, 8 Jul 2008 18:16:06 +0000 (14:16 -0400)
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
Signed-off-by: Hin-Tak Leung <htl10@users.sourceforge.net>
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
drivers/net/wireless/rtl818x.h

index 4f7d38f506ebb63acda3ea9e603170f39ca9f0bf..85a6394e4309a2fbfab364c59026e747bfb38540 100644 (file)
@@ -66,7 +66,10 @@ struct rtl818x_csr {
 #define RTL818X_TX_CONF_R8180_F                (3 << 25)
 #define RTL818X_TX_CONF_R8185_ABC      (4 << 25)
 #define RTL818X_TX_CONF_R8185_D                (5 << 25)
+#define RTL818X_TX_CONF_R8187vD_1      (5 << 25)
+#define RTL818X_TX_CONF_R8187vD_2      (6 << 25)
 #define RTL818X_TX_CONF_HWVER_MASK     (7 << 25)
+#define RTL818X_TX_CONF_DISREQQSIZE    (1 << 28)
 #define RTL818X_TX_CONF_PROBE_DTS      (1 << 29)
 #define RTL818X_TX_CONF_HW_SEQNUM      (1 << 30)
 #define RTL818X_TX_CONF_CW_MIN         (1 << 31)
@@ -106,8 +109,11 @@ struct rtl818x_csr {
 #define RTL818X_MSR_NO_LINK            (0 << 2)
 #define RTL818X_MSR_ADHOC              (1 << 2)
 #define RTL818X_MSR_INFRA              (2 << 2)
+#define RTL818X_MSR_MASTER             (3 << 2)
+#define RTL818X_MSR_ENEDCA             (4 << 2)
        u8      CONFIG3;
 #define RTL818X_CONFIG3_ANAPARAM_WRITE (1 << 6)
+#define RTL818X_CONFIG3_GNT_SELECT     (1 << 7)
        u8      CONFIG4;
 #define RTL818X_CONFIG4_POWEROFF       (1 << 6)
 #define RTL818X_CONFIG4_VCOOFF         (1 << 7)
@@ -133,7 +139,9 @@ struct rtl818x_csr {
        __le32  RF_TIMING;
        u8      GP_ENABLE;
        u8      GPIO;
-       u8      reserved_12[10];
+       u8      reserved_12[2];
+       __le32  HSSI_PARA;
+       u8      reserved_13[4];
        u8      TX_AGC_CTL;
 #define RTL818X_TX_AGC_CTL_PERPACKET_GAIN_SHIFT                (1 << 0)
 #define RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL_SHIFT      (1 << 1)
@@ -141,29 +149,39 @@ struct rtl818x_csr {
        u8      TX_GAIN_CCK;
        u8      TX_GAIN_OFDM;
        u8      TX_ANTENNA;
-       u8      reserved_13[16];
+       u8      reserved_14[16];
        u8      WPA_CONF;
-       u8      reserved_14[3];
+       u8      reserved_15[3];
        u8      SIFS;
        u8      DIFS;
        u8      SLOT;
-       u8      reserved_15[5];
+       u8      reserved_16[5];
        u8      CW_CONF;
 #define RTL818X_CW_CONF_PERPACKET_CW_SHIFT     (1 << 0)
 #define RTL818X_CW_CONF_PERPACKET_RETRY_SHIFT  (1 << 1)
        u8      CW_VAL;
        u8      RATE_FALLBACK;
-       u8      reserved_16[25];
+#define RTL818X_RATE_FALLBACK_ENABLE   (1 << 7)
+       u8      ACM_CONTROL;
+       u8      reserved_17[24];
        u8      CONFIG5;
        u8      TX_DMA_POLLING;
-       u8      reserved_17[2];
+       u8      reserved_18[2];
        __le16  CWR;
        u8      RETRY_CTR;
-       u8      reserved_18[5];
+       u8      reserved_19[3];
+       __le16  INT_MIG;
+/* RTL818X_R8187B_*: magic numbers from ioregisters */
+#define RTL818X_R8187B_B       0
+#define RTL818X_R8187B_D       1
+#define RTL818X_R8187B_E       2
        __le32  RDSAR;
-       u8      reserved_19[12];
-       __le16  FEMR;
+       __le16  TID_AC_MAP;
        u8      reserved_20[4];
+       u8      ANAPARAM3;
+       u8      reserved_21[5];
+       __le16  FEMR;
+       u8      reserved_22[4];
        __le16  TALLY_CNT;
        u8      TALLY_SEL;
 } __attribute__((packed));