]> err.no Git - linux-2.6/commitdiff
[PATCH] mv643xx_eth: use MII library for ethtool functions
authorJames Chapman <jchapman@katalix.com>
Fri, 27 Jan 2006 08:15:30 +0000 (01:15 -0700)
committerJeff Garzik <jgarzik@pobox.com>
Fri, 27 Jan 2006 16:11:16 +0000 (11:11 -0500)
Use the common ethtool support functions of the MII library.
Add generic MII ioctl handler.
Add PHY parameter speed/duplex/negotiation initialization and modification.

Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
drivers/net/mv643xx_eth.c
include/linux/mv643xx.h

index bca7257c707a610815bd9b161099607877441284..ff2b613a74367d7e73e25490c744b8f963cad01f 100644 (file)
@@ -101,6 +101,7 @@ static void ethernet_phy_set(unsigned int eth_port_num, int phy_addr);
 static int ethernet_phy_detect(unsigned int eth_port_num);
 static int mv643xx_mdio_read(struct net_device *dev, int phy_id, int location);
 static void mv643xx_mdio_write(struct net_device *dev, int phy_id, int location, int val);
+static int mv643xx_eth_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd);
 static struct ethtool_ops mv643xx_ethtool_ops;
 
 static char mv643xx_driver_name[] = "mv643xx_eth";
@@ -457,6 +458,56 @@ static int mv643xx_eth_receive_queue(struct net_device *dev)
        return received_packets;
 }
 
+/* Set the mv643xx port configuration register for the speed/duplex mode. */
+static void mv643xx_eth_update_pscr(struct net_device *dev,
+                                   struct ethtool_cmd *ecmd)
+{
+       struct mv643xx_private *mp = netdev_priv(dev);
+       int port_num = mp->port_num;
+       u32 o_pscr, n_pscr;
+       unsigned int channels;
+
+       o_pscr = mv_read(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(port_num));
+       n_pscr = o_pscr;
+
+       /* clear speed, duplex and rx buffer size fields */
+       n_pscr &= ~(MV643XX_ETH_SET_MII_SPEED_TO_100  |
+                  MV643XX_ETH_SET_GMII_SPEED_TO_1000 |
+                  MV643XX_ETH_SET_FULL_DUPLEX_MODE   |
+                  MV643XX_ETH_MAX_RX_PACKET_MASK);
+
+       if (ecmd->duplex == DUPLEX_FULL)
+               n_pscr |= MV643XX_ETH_SET_FULL_DUPLEX_MODE;
+
+       if (ecmd->speed == SPEED_1000)
+               n_pscr |= MV643XX_ETH_SET_GMII_SPEED_TO_1000 |
+                         MV643XX_ETH_MAX_RX_PACKET_9700BYTE;
+       else {
+               if (ecmd->speed == SPEED_100)
+                       n_pscr |= MV643XX_ETH_SET_MII_SPEED_TO_100;
+               n_pscr |= MV643XX_ETH_MAX_RX_PACKET_1522BYTE;
+       }
+
+       if (n_pscr != o_pscr) {
+               if ((o_pscr & MV643XX_ETH_SERIAL_PORT_ENABLE) == 0)
+                       mv_write(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(port_num),
+                                                               n_pscr);
+               else {
+                       channels = mv643xx_eth_port_disable_tx(port_num);
+
+                       o_pscr &= ~MV643XX_ETH_SERIAL_PORT_ENABLE;
+                       mv_write(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(port_num),
+                                                               o_pscr);
+                       mv_write(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(port_num),
+                                                               n_pscr);
+                       mv_write(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(port_num),
+                                                               n_pscr);
+                       if (channels)
+                               mv643xx_eth_port_enable_tx(port_num, channels);
+               }
+       }
+}
+
 /*
  * mv643xx_eth_int_handler
  *
@@ -539,13 +590,19 @@ static irqreturn_t mv643xx_eth_int_handler(int irq, void *dev_id,
        }
        /* PHY status changed */
        if (eth_int_cause_ext & (BIT16 | BIT20)) {
+               struct ethtool_cmd cmd;
+
                if (mii_link_ok(&mp->mii)) {
+                       mii_ethtool_gset(&mp->mii, &cmd);
+                       mv643xx_eth_update_pscr(dev, &cmd);
                        if (!netif_carrier_ok(dev)) {
                                netif_carrier_on(dev);
-                               netif_wake_queue(dev);
-                               /* Start TX queue */
-                               mv643xx_eth_port_enable_tx(port_num,
-                                               mp->port_tx_queue_command);
+                               if (mp->tx_ring_size > mp->tx_desc_count +
+                                                       MAX_DESCS_PER_SKB) {
+                                       netif_wake_queue(dev);
+                                       /* Start TX queue */
+                                       mv643xx_eth_port_enable_tx(port_num, mp->port_tx_queue_command);
+                               }
                        }
                } else if (netif_carrier_ok(dev)) {
                        netif_stop_queue(dev);
@@ -729,6 +786,34 @@ static void ether_init_tx_desc_ring(struct mv643xx_private *mp)
        mp->port_tx_queue_command = 1;
 }
 
+static int mv643xx_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+       struct mv643xx_private *mp = netdev_priv(dev);
+       int err;
+
+       spin_lock_irq(&mp->lock);
+       err = mii_ethtool_sset(&mp->mii, cmd);
+       spin_unlock_irq(&mp->lock);
+
+       return err;
+}
+
+static int mv643xx_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+       struct mv643xx_private *mp = netdev_priv(dev);
+       int err;
+
+       spin_lock_irq(&mp->lock);
+       err = mii_ethtool_gset(&mp->mii, cmd);
+       spin_unlock_irq(&mp->lock);
+
+       /* The PHY may support 1000baseT_Half, but the mv643xx does not */
+       cmd->supported &= ~SUPPORTED_1000baseT_Half;
+       cmd->advertising &= ~ADVERTISED_1000baseT_Half;
+
+       return err;
+}
+
 /*
  * mv643xx_eth_open
  *
@@ -842,6 +927,10 @@ static int mv643xx_eth_open(struct net_device *dev)
 
        mv643xx_eth_rx_task(dev);       /* Fill RX ring with skb's */
 
+       /* Clear any pending ethernet port interrupts */
+       mv_write(MV643XX_ETH_INTERRUPT_CAUSE_REG(port_num), 0);
+       mv_write(MV643XX_ETH_INTERRUPT_CAUSE_EXTEND_REG(port_num), 0);
+
        eth_port_start(dev);
 
        /* Interrupt Coalescing */
@@ -854,16 +943,13 @@ static int mv643xx_eth_open(struct net_device *dev)
        mp->tx_int_coal =
                eth_port_set_tx_coal(port_num, 133000000, MV643XX_TX_COAL);
 
-       /* Clear any pending ethernet port interrupts */
-       mv_write(MV643XX_ETH_INTERRUPT_CAUSE_REG(port_num), 0);
-       mv_write(MV643XX_ETH_INTERRUPT_CAUSE_EXTEND_REG(port_num), 0);
-
        /* Unmask phy and link status changes interrupts */
        mv_write(MV643XX_ETH_INTERRUPT_EXTEND_MASK_REG(port_num),
                                                INT_UNMASK_ALL_EXT);
 
        /* Unmask RX buffer and TX end interrupt */
        mv_write(MV643XX_ETH_INTERRUPT_MASK_REG(port_num), INT_UNMASK_ALL);
+
        return 0;
 
 out_free_tx_skb:
@@ -1318,6 +1404,35 @@ static void mv643xx_netpoll(struct net_device *netdev)
 }
 #endif
 
+static void mv643xx_init_ethtool_cmd(struct net_device *dev, int phy_address,
+                                    int speed, int duplex,
+                                    struct ethtool_cmd *cmd)
+{
+       struct mv643xx_private *mp = netdev_priv(dev);
+
+       memset(cmd, 0, sizeof(*cmd));
+
+       cmd->port = PORT_MII;
+       cmd->transceiver = XCVR_INTERNAL;
+       cmd->phy_address = phy_address;
+
+       if (speed == 0) {
+               cmd->autoneg = AUTONEG_ENABLE;
+               /* mii lib checks, but doesn't use speed on AUTONEG_ENABLE */
+               cmd->speed = SPEED_100;
+               cmd->advertising = ADVERTISED_10baseT_Half  |
+                                  ADVERTISED_10baseT_Full  |
+                                  ADVERTISED_100baseT_Half |
+                                  ADVERTISED_100baseT_Full;
+               if (mp->mii.supports_gmii)
+                       cmd->advertising |= ADVERTISED_1000baseT_Full;
+       } else {
+               cmd->autoneg = AUTONEG_DISABLE;
+               cmd->speed = speed;
+               cmd->duplex = duplex;
+       }
+}
+
 /*/
  * mv643xx_eth_probe
  *
@@ -1338,6 +1453,10 @@ static int mv643xx_eth_probe(struct platform_device *pdev)
        u8 *p;
        struct resource *res;
        int err;
+       struct ethtool_cmd cmd;
+       u32 pscr;
+       int duplex;
+       int speed;
 
        dev = alloc_etherdev(sizeof(struct mv643xx_private));
        if (!dev)
@@ -1375,6 +1494,7 @@ static int mv643xx_eth_probe(struct platform_device *pdev)
        dev->tx_queue_len = mp->tx_ring_size;
        dev->base_addr = 0;
        dev->change_mtu = mv643xx_eth_change_mtu;
+       dev->do_ioctl = mv643xx_eth_do_ioctl;
        SET_ETHTOOL_OPS(dev, &mv643xx_ethtool_ops);
 
 #ifdef MV643XX_CHECKSUM_OFFLOAD_TX
@@ -1452,10 +1572,35 @@ static int mv643xx_eth_probe(struct platform_device *pdev)
                pr_debug("MV643xx ethernet port %d: "
                                        "No PHY detected at addr %d\n",
                                        port_num, ethernet_phy_get(port_num));
-               return err;
+               goto out;
        }
 
+       pscr = mv_read(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(port_num));
+       pscr &= ~MV643XX_ETH_SERIAL_PORT_ENABLE;
+       mv_write(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(port_num), pscr);
+       pscr = mp->port_serial_control;
+       mv_write(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(port_num), pscr);
+
+       if (!(pscr & MV643XX_ETH_DISABLE_AUTO_NEG_FOR_DUPLX) &&
+           !(pscr & MV643XX_ETH_DISABLE_AUTO_NEG_SPEED_GMII))
+               speed = 0;
+       else if (pscr & MV643XX_ETH_PORT_STATUS_GMII_1000)
+               speed = SPEED_1000;
+       else if (pscr & MV643XX_ETH_PORT_STATUS_MII_100)
+               speed = SPEED_100;
+       else
+               speed = SPEED_10;
+
+       if (pscr & MV643XX_ETH_PORT_STATUS_FULL_DUPLEX)
+               duplex = DUPLEX_FULL;
+       else
+               duplex = DUPLEX_HALF;
+
+       ethernet_phy_reset(mp->port_num);
        mp->mii.supports_gmii = mii_check_gmii_support(&mp->mii);
+       mv643xx_init_ethtool_cmd(dev, mp->mii.phy_id, speed, duplex, &cmd);
+       mv643xx_eth_update_pscr(dev, &cmd);
+       mv643xx_set_settings(dev, &cmd);
 
        err = register_netdev(dev);
        if (err)
@@ -1775,8 +1920,6 @@ static void eth_port_init(struct mv643xx_private *mp)
        eth_port_reset(mp->port_num);
 
        eth_port_init_mac_tables(mp->port_num);
-
-       ethernet_phy_reset(mp->port_num);
 }
 
 /*
@@ -1811,6 +1954,8 @@ static void eth_port_start(struct net_device *dev)
        struct mv643xx_private *mp = netdev_priv(dev);
        unsigned int port_num = mp->port_num;
        int tx_curr_desc, rx_curr_desc;
+       u32 pscr;
+       struct ethtool_cmd ethtool_cmd;
 
        /* Assignment of Tx CTRP of given queue */
        tx_curr_desc = mp->tx_curr_desc_q;
@@ -1828,31 +1973,35 @@ static void eth_port_start(struct net_device *dev)
        /* Assign port configuration and command. */
        mv_write(MV643XX_ETH_PORT_CONFIG_REG(port_num), mp->port_config);
 
-       mv_write(MV643XX_ETH_PORT_CONFIG_EXTEND_REG(port_num),
-                                               mp->port_config_extend);
+       pscr = mv_read(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(port_num));
+       pscr &= ~MV643XX_ETH_SERIAL_PORT_ENABLE;
+       mv_write(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(port_num), pscr);
 
+       pscr &= ~MV643XX_ETH_FORCE_LINK_PASS;
+       pscr |= MV643XX_ETH_DISABLE_AUTO_NEG_FOR_FLOW_CTRL |
+               MV643XX_ETH_DISABLE_AUTO_NEG_SPEED_GMII    |
+               MV643XX_ETH_DISABLE_AUTO_NEG_FOR_DUPLX     |
+               MV643XX_ETH_DO_NOT_FORCE_LINK_FAIL         |
+               MV643XX_ETH_SERIAL_PORT_CONTROL_RESERVED;
 
-       /* Increase the Rx side buffer size if supporting GigE */
-       if (mp->port_serial_control & MV643XX_ETH_SET_GMII_SPEED_TO_1000)
-               mv_write(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(port_num),
-                       (mp->port_serial_control & 0xfff1ffff) | (0x5 << 17));
-       else
-               mv_write(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(port_num),
-                                               mp->port_serial_control);
+       mv_write(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(port_num), pscr);
 
-       mv_write(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(port_num),
-               mv_read(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(port_num)) |
-                                               MV643XX_ETH_SERIAL_PORT_ENABLE);
+       pscr |= MV643XX_ETH_SERIAL_PORT_ENABLE;
+       mv_write(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(port_num), pscr);
 
        /* Assign port SDMA configuration */
-       mv_write(MV643XX_ETH_SDMA_CONFIG_REG(port_num),
-                                                       mp->port_sdma_config);
+       mv_write(MV643XX_ETH_SDMA_CONFIG_REG(port_num), mp->port_sdma_config);
 
        /* Enable port Rx. */
        mv643xx_eth_port_enable_rx(port_num, mp->port_rx_queue_command);
 
        /* Disable port bandwidth limits by clearing MTU register */
        mv_write(MV643XX_ETH_MAXIMUM_TRANSMIT_UNIT(port_num), 0);
+
+       /* save phy settings across reset */
+       mv643xx_get_settings(dev, &ethtool_cmd);
+       ethernet_phy_reset(mp->port_num);
+       mv643xx_set_settings(dev, &ethtool_cmd);
 }
 
 /*
@@ -2324,6 +2473,12 @@ static void ethernet_phy_reset(unsigned int eth_port_num)
        eth_port_read_smi_reg(eth_port_num, 0, &phy_reg_data);
        phy_reg_data |= 0x8000; /* Set bit 15 to reset the PHY */
        eth_port_write_smi_reg(eth_port_num, 0, phy_reg_data);
+
+       /* wait for PHY to come out of reset */
+       do {
+               udelay(1);
+               eth_port_read_smi_reg(eth_port_num, 0, &phy_reg_data);
+       } while (phy_reg_data & 0x8000);
 }
 
 static void mv643xx_eth_port_enable_tx(unsigned int port_num,
@@ -2417,20 +2572,13 @@ static void eth_port_reset(unsigned int port_num)
 
        /* Reset the Enable bit in the Configuration Register */
        reg_data = mv_read(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(port_num));
-       reg_data &= ~MV643XX_ETH_SERIAL_PORT_ENABLE;
+       reg_data &= ~(MV643XX_ETH_SERIAL_PORT_ENABLE            |
+                       MV643XX_ETH_DO_NOT_FORCE_LINK_FAIL      |
+                       MV643XX_ETH_FORCE_LINK_PASS);
        mv_write(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(port_num), reg_data);
 }
 
 
-static int eth_port_autoneg_supported(unsigned int eth_port_num)
-{
-       unsigned int phy_reg_data0;
-
-       eth_port_read_smi_reg(eth_port_num, 0, &phy_reg_data0);
-
-       return phy_reg_data0 & 0x1000;
-}
-
 /*
  * eth_port_read_smi_reg - Read PHY registers
  *
@@ -2989,111 +3137,6 @@ static const struct mv643xx_stats mv643xx_gstrings_stats[] = {
 #define MV643XX_STATS_LEN      \
        sizeof(mv643xx_gstrings_stats) / sizeof(struct mv643xx_stats)
 
-static int
-mv643xx_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
-{
-       struct mv643xx_private *mp = netdev->priv;
-       int port_num = mp->port_num;
-       int autoneg = eth_port_autoneg_supported(port_num);
-       int mode_10_bit;
-       int auto_duplex;
-       int half_duplex = 0;
-       int full_duplex = 0;
-       int auto_speed;
-       int speed_10 = 0;
-       int speed_100 = 0;
-       int speed_1000 = 0;
-
-       u32 pcs = mv_read(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(port_num));
-       u32 psr = mv_read(MV643XX_ETH_PORT_STATUS_REG(port_num));
-
-       mode_10_bit = psr & MV643XX_ETH_PORT_STATUS_MODE_10_BIT;
-
-       if (mode_10_bit) {
-               ecmd->supported = SUPPORTED_10baseT_Half;
-       } else {
-               ecmd->supported = (SUPPORTED_10baseT_Half               |
-                                  SUPPORTED_10baseT_Full               |
-                                  SUPPORTED_100baseT_Half              |
-                                  SUPPORTED_100baseT_Full              |
-                                  SUPPORTED_1000baseT_Full             |
-                                  (autoneg ? SUPPORTED_Autoneg : 0)    |
-                                  SUPPORTED_TP);
-
-               auto_duplex = !(pcs & MV643XX_ETH_DISABLE_AUTO_NEG_FOR_DUPLX);
-               auto_speed = !(pcs & MV643XX_ETH_DISABLE_AUTO_NEG_SPEED_GMII);
-
-               ecmd->advertising = ADVERTISED_TP;
-
-               if (autoneg) {
-                       ecmd->advertising |= ADVERTISED_Autoneg;
-
-                       if (auto_duplex) {
-                               half_duplex = 1;
-                               full_duplex = 1;
-                       } else {
-                               if (pcs & MV643XX_ETH_SET_FULL_DUPLEX_MODE)
-                                       full_duplex = 1;
-                               else
-                                       half_duplex = 1;
-                       }
-
-                       if (auto_speed) {
-                               speed_10 = 1;
-                               speed_100 = 1;
-                               speed_1000 = 1;
-                       } else {
-                               if (pcs & MV643XX_ETH_SET_GMII_SPEED_TO_1000)
-                                       speed_1000 = 1;
-                               else if (pcs & MV643XX_ETH_SET_MII_SPEED_TO_100)
-                                       speed_100 = 1;
-                               else
-                                       speed_10 = 1;
-                       }
-
-                       if (speed_10 & half_duplex)
-                               ecmd->advertising |= ADVERTISED_10baseT_Half;
-                       if (speed_10 & full_duplex)
-                               ecmd->advertising |= ADVERTISED_10baseT_Full;
-                       if (speed_100 & half_duplex)
-                               ecmd->advertising |= ADVERTISED_100baseT_Half;
-                       if (speed_100 & full_duplex)
-                               ecmd->advertising |= ADVERTISED_100baseT_Full;
-                       if (speed_1000)
-                               ecmd->advertising |= ADVERTISED_1000baseT_Full;
-               }
-       }
-
-       ecmd->port = PORT_TP;
-       ecmd->phy_address = ethernet_phy_get(port_num);
-
-       ecmd->transceiver = XCVR_EXTERNAL;
-
-       if (netif_carrier_ok(netdev)) {
-               if (mode_10_bit)
-                       ecmd->speed = SPEED_10;
-               else {
-                       if (psr & MV643XX_ETH_PORT_STATUS_GMII_1000)
-                               ecmd->speed = SPEED_1000;
-                       else if (psr & MV643XX_ETH_PORT_STATUS_MII_100)
-                               ecmd->speed = SPEED_100;
-                       else
-                               ecmd->speed = SPEED_10;
-               }
-
-               if (psr & MV643XX_ETH_PORT_STATUS_FULL_DUPLEX)
-                       ecmd->duplex = DUPLEX_FULL;
-               else
-                       ecmd->duplex = DUPLEX_HALF;
-       } else {
-               ecmd->speed = -1;
-               ecmd->duplex = -1;
-       }
-
-       ecmd->autoneg = autoneg ? AUTONEG_ENABLE : AUTONEG_DISABLE;
-       return 0;
-}
-
 static void mv643xx_get_drvinfo(struct net_device *netdev,
                                struct ethtool_drvinfo *drvinfo)
 {
@@ -3140,15 +3183,41 @@ static void mv643xx_get_strings(struct net_device *netdev, uint32_t stringset,
        }
 }
 
+static u32 mv643xx_eth_get_link(struct net_device *dev)
+{
+       struct mv643xx_private *mp = netdev_priv(dev);
+
+       return mii_link_ok(&mp->mii);
+}
+
+static int mv643xx_eth_nway_restart(struct net_device *dev)
+{
+       struct mv643xx_private *mp = netdev_priv(dev);
+
+       return mii_nway_restart(&mp->mii);
+}
+
+static int mv643xx_eth_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+{
+       struct mv643xx_private *mp = netdev_priv(dev);
+
+       return generic_mii_ioctl(&mp->mii, if_mii(ifr), cmd, NULL);
+}
+
 static struct ethtool_ops mv643xx_ethtool_ops = {
        .get_settings           = mv643xx_get_settings,
+       .set_settings           = mv643xx_set_settings,
        .get_drvinfo            = mv643xx_get_drvinfo,
-       .get_link               = ethtool_op_get_link,
+       .get_link               = mv643xx_eth_get_link,
        .get_sg                 = ethtool_op_get_sg,
        .set_sg                 = ethtool_op_set_sg,
        .get_strings            = mv643xx_get_strings,
        .get_stats_count        = mv643xx_get_stats_count,
        .get_ethtool_stats      = mv643xx_get_ethtool_stats,
+       .get_strings            = mv643xx_get_strings,
+       .get_stats_count        = mv643xx_get_stats_count,
+       .get_ethtool_stats      = mv643xx_get_ethtool_stats,
+       .nway_reset             = mv643xx_eth_nway_restart,
 };
 
 /************* End ethtool support *************************/
index 0b08cd6922012589a938209b240a27f7bb898580..7ffbeac7d2bb058d87f604a75d3a7283c9cd2cd9 100644 (file)
@@ -1214,6 +1214,7 @@ struct mv64xxx_i2c_pdata {
 #define MV643XX_ETH_FORCE_BP_MODE_NO_JAM               0
 #define MV643XX_ETH_FORCE_BP_MODE_JAM_TX               (1<<7)
 #define MV643XX_ETH_FORCE_BP_MODE_JAM_TX_ON_RX_ERR     (1<<8)
+#define MV643XX_ETH_SERIAL_PORT_CONTROL_RESERVED       (1<<9)
 #define MV643XX_ETH_FORCE_LINK_FAIL                    0
 #define MV643XX_ETH_DO_NOT_FORCE_LINK_FAIL             (1<<10)
 #define MV643XX_ETH_RETRANSMIT_16_ATTEMPTS             0
@@ -1243,6 +1244,8 @@ struct mv64xxx_i2c_pdata {
 #define MV643XX_ETH_SET_MII_SPEED_TO_10                        0
 #define MV643XX_ETH_SET_MII_SPEED_TO_100               (1<<24)
 
+#define MV643XX_ETH_MAX_RX_PACKET_MASK                 (0x7<<17)
+
 #define        MV643XX_ETH_PORT_SERIAL_CONTROL_DEFAULT_VALUE           \
                MV643XX_ETH_DO_NOT_FORCE_LINK_PASS      |       \
                MV643XX_ETH_ENABLE_AUTO_NEG_FOR_DUPLX   |       \