/* this enables an interrupt in the interrupt mask register */
-#define SMC_ENABLE_INT(x) do { \
+#define SMC_ENABLE_INT(lp, x) do { \
unsigned char mask; \
spin_lock_irq(&lp->lock); \
- mask = SMC_GET_INT_MASK(); \
+ mask = SMC_GET_INT_MASK(lp); \
mask |= (x); \
- SMC_SET_INT_MASK(mask); \
+ SMC_SET_INT_MASK(lp, mask); \
spin_unlock_irq(&lp->lock); \
} while (0)
/* this disables an interrupt from the interrupt mask register */
-#define SMC_DISABLE_INT(x) do { \
+#define SMC_DISABLE_INT(lp, x) do { \
unsigned char mask; \
spin_lock_irq(&lp->lock); \
- mask = SMC_GET_INT_MASK(); \
+ mask = SMC_GET_INT_MASK(lp); \
mask &= ~(x); \
- SMC_SET_INT_MASK(mask); \
+ SMC_SET_INT_MASK(lp, mask); \
spin_unlock_irq(&lp->lock); \
} while (0)
* if at all, but let's avoid deadlocking the system if the hardware
* decides to go south.
*/
-#define SMC_WAIT_MMU_BUSY() do { \
- if (unlikely(SMC_GET_MMU_CMD() & MC_BUSY)) { \
+#define SMC_WAIT_MMU_BUSY(lp) do { \
+ if (unlikely(SMC_GET_MMU_CMD(lp) & MC_BUSY)) { \
unsigned long timeout = jiffies + 2; \
- while (SMC_GET_MMU_CMD() & MC_BUSY) { \
+ while (SMC_GET_MMU_CMD(lp) & MC_BUSY) { \
if (time_after(jiffies, timeout)) { \
printk("%s: timeout %s line %d\n", \
dev->name, __FILE__, __LINE__); \
/* Disable all interrupts, block TX tasklet */
spin_lock_irq(&lp->lock);
- SMC_SELECT_BANK(2);
- SMC_SET_INT_MASK(0);
+ SMC_SELECT_BANK(lp, 2);
+ SMC_SET_INT_MASK(lp, 0);
pending_skb = lp->pending_tx_skb;
lp->pending_tx_skb = NULL;
spin_unlock_irq(&lp->lock);
* This resets the registers mostly to defaults, but doesn't
* affect EEPROM. That seems unnecessary
*/
- SMC_SELECT_BANK(0);
- SMC_SET_RCR(RCR_SOFTRST);
+ SMC_SELECT_BANK(lp, 0);
+ SMC_SET_RCR(lp, RCR_SOFTRST);
/*
* Setup the Configuration Register
* This is necessary because the CONFIG_REG is not affected
* by a soft reset
*/
- SMC_SELECT_BANK(1);
+ SMC_SELECT_BANK(lp, 1);
cfg = CONFIG_DEFAULT;
*/
cfg |= CONFIG_EPH_POWER_EN;
- SMC_SET_CONFIG(cfg);
+ SMC_SET_CONFIG(lp, cfg);
/* this should pause enough for the chip to be happy */
/*
udelay(1);
/* Disable transmit and receive functionality */
- SMC_SELECT_BANK(0);
- SMC_SET_RCR(RCR_CLEAR);
- SMC_SET_TCR(TCR_CLEAR);
+ SMC_SELECT_BANK(lp, 0);
+ SMC_SET_RCR(lp, RCR_CLEAR);
+ SMC_SET_TCR(lp, TCR_CLEAR);
- SMC_SELECT_BANK(1);
- ctl = SMC_GET_CTL() | CTL_LE_ENABLE;
+ SMC_SELECT_BANK(lp, 1);
+ ctl = SMC_GET_CTL(lp) | CTL_LE_ENABLE;
/*
* Set the control register to automatically release successfully
ctl |= CTL_AUTO_RELEASE;
else
ctl &= ~CTL_AUTO_RELEASE;
- SMC_SET_CTL(ctl);
+ SMC_SET_CTL(lp, ctl);
/* Reset the MMU */
- SMC_SELECT_BANK(2);
- SMC_SET_MMU_CMD(MC_RESET);
- SMC_WAIT_MMU_BUSY();
+ SMC_SELECT_BANK(lp, 2);
+ SMC_SET_MMU_CMD(lp, MC_RESET);
+ SMC_WAIT_MMU_BUSY(lp);
}
/*
DBG(2, "%s: %s\n", dev->name, __FUNCTION__);
/* see the header file for options in TCR/RCR DEFAULT */
- SMC_SELECT_BANK(0);
- SMC_SET_TCR(lp->tcr_cur_mode);
- SMC_SET_RCR(lp->rcr_cur_mode);
+ SMC_SELECT_BANK(lp, 0);
+ SMC_SET_TCR(lp, lp->tcr_cur_mode);
+ SMC_SET_RCR(lp, lp->rcr_cur_mode);
- SMC_SELECT_BANK(1);
- SMC_SET_MAC_ADDR(dev->dev_addr);
+ SMC_SELECT_BANK(lp, 1);
+ SMC_SET_MAC_ADDR(lp, dev->dev_addr);
/* now, enable interrupts */
mask = IM_EPH_INT|IM_RX_OVRN_INT|IM_RCV_INT;
if (lp->version >= (CHIP_91100 << 4))
mask |= IM_MDINT;
- SMC_SELECT_BANK(2);
- SMC_SET_INT_MASK(mask);
+ SMC_SELECT_BANK(lp, 2);
+ SMC_SET_INT_MASK(lp, mask);
/*
* From this point the register bank must _NOT_ be switched away
/* no more interrupts for me */
spin_lock_irq(&lp->lock);
- SMC_SELECT_BANK(2);
- SMC_SET_INT_MASK(0);
+ SMC_SELECT_BANK(lp, 2);
+ SMC_SET_INT_MASK(lp, 0);
pending_skb = lp->pending_tx_skb;
lp->pending_tx_skb = NULL;
spin_unlock_irq(&lp->lock);
dev_kfree_skb(pending_skb);
/* and tell the card to stay away from that nasty outside world */
- SMC_SELECT_BANK(0);
- SMC_SET_RCR(RCR_CLEAR);
- SMC_SET_TCR(TCR_CLEAR);
+ SMC_SELECT_BANK(lp, 0);
+ SMC_SET_RCR(lp, RCR_CLEAR);
+ SMC_SET_TCR(lp, TCR_CLEAR);
#ifdef POWER_DOWN
/* finally, shut the chip down */
- SMC_SELECT_BANK(1);
- SMC_SET_CONFIG(SMC_GET_CONFIG() & ~CONFIG_EPH_POWER_EN);
+ SMC_SELECT_BANK(lp, 1);
+ SMC_SET_CONFIG(lp, SMC_GET_CONFIG(lp) & ~CONFIG_EPH_POWER_EN);
#endif
}
DBG(3, "%s: %s\n", dev->name, __FUNCTION__);
- packet_number = SMC_GET_RXFIFO();
+ packet_number = SMC_GET_RXFIFO(lp);
if (unlikely(packet_number & RXFIFO_REMPTY)) {
PRINTK("%s: smc_rcv with nothing on FIFO.\n", dev->name);
return;
}
/* read from start of packet */
- SMC_SET_PTR(PTR_READ | PTR_RCV | PTR_AUTOINC);
+ SMC_SET_PTR(lp, PTR_READ | PTR_RCV | PTR_AUTOINC);
/* First two words are status and packet length */
- SMC_GET_PKT_HDR(status, packet_len);
+ SMC_GET_PKT_HDR(lp, status, packet_len);
packet_len &= 0x07ff; /* mask off top bits */
DBG(2, "%s: RX PNR 0x%x STATUS 0x%04x LENGTH 0x%04x (%d)\n",
dev->name, packet_number, status,
dev->name, packet_len, status);
status |= RS_TOOSHORT;
}
- SMC_WAIT_MMU_BUSY();
- SMC_SET_MMU_CMD(MC_RELEASE);
+ SMC_WAIT_MMU_BUSY(lp);
+ SMC_SET_MMU_CMD(lp, MC_RELEASE);
dev->stats.rx_errors++;
if (status & RS_ALGNERR)
dev->stats.rx_frame_errors++;
if (unlikely(skb == NULL)) {
printk(KERN_NOTICE "%s: Low memory, packet dropped.\n",
dev->name);
- SMC_WAIT_MMU_BUSY();
- SMC_SET_MMU_CMD(MC_RELEASE);
+ SMC_WAIT_MMU_BUSY(lp);
+ SMC_SET_MMU_CMD(lp, MC_RELEASE);
dev->stats.rx_dropped++;
return;
}
*/
data_len = packet_len - ((status & RS_ODDFRAME) ? 5 : 6);
data = skb_put(skb, data_len);
- SMC_PULL_DATA(data, packet_len - 4);
+ SMC_PULL_DATA(lp, data, packet_len - 4);
- SMC_WAIT_MMU_BUSY();
- SMC_SET_MMU_CMD(MC_RELEASE);
+ SMC_WAIT_MMU_BUSY(lp);
+ SMC_SET_MMU_CMD(lp, MC_RELEASE);
PRINT_PKT(data, packet_len - 4);
}
lp->pending_tx_skb = NULL;
- packet_no = SMC_GET_AR();
+ packet_no = SMC_GET_AR(lp);
if (unlikely(packet_no & AR_FAILED)) {
printk("%s: Memory allocation failed.\n", dev->name);
dev->stats.tx_errors++;
}
/* point to the beginning of the packet */
- SMC_SET_PN(packet_no);
- SMC_SET_PTR(PTR_AUTOINC);
+ SMC_SET_PN(lp, packet_no);
+ SMC_SET_PTR(lp, PTR_AUTOINC);
buf = skb->data;
len = skb->len;
* Send the packet length (+6 for status words, length, and ctl.
* The card will pad to 64 bytes with zeroes if packet is too small.
*/
- SMC_PUT_PKT_HDR(0, len + 6);
+ SMC_PUT_PKT_HDR(lp, 0, len + 6);
/* send the actual data */
- SMC_PUSH_DATA(buf, len & ~1);
+ SMC_PUSH_DATA(lp, buf, len & ~1);
/* Send final ctl word with the last byte if there is one */
- SMC_outw(((len & 1) ? (0x2000 | buf[len-1]) : 0), ioaddr, DATA_REG);
+ SMC_outw(((len & 1) ? (0x2000 | buf[len-1]) : 0), ioaddr, DATA_REG(lp));
/*
* If THROTTLE_TX_PKTS is set, we stop the queue here. This will
netif_stop_queue(dev);
/* queue the packet for TX */
- SMC_SET_MMU_CMD(MC_ENQUEUE);
+ SMC_SET_MMU_CMD(lp, MC_ENQUEUE);
smc_special_unlock(&lp->lock);
dev->trans_start = jiffies;
dev->stats.tx_packets++;
dev->stats.tx_bytes += len;
- SMC_ENABLE_INT(IM_TX_INT | IM_TX_EMPTY_INT);
+ SMC_ENABLE_INT(lp, IM_TX_INT | IM_TX_EMPTY_INT);
done: if (!THROTTLE_TX_PKTS)
netif_wake_queue(dev);
smc_special_lock(&lp->lock);
/* now, try to allocate the memory */
- SMC_SET_MMU_CMD(MC_ALLOC | numPages);
+ SMC_SET_MMU_CMD(lp, MC_ALLOC | numPages);
/*
* Poll the chip for a short amount of time in case the
*/
poll_count = MEMORY_WAIT_TIME;
do {
- status = SMC_GET_INT();
+ status = SMC_GET_INT(lp);
if (status & IM_ALLOC_INT) {
- SMC_ACK_INT(IM_ALLOC_INT);
+ SMC_ACK_INT(lp, IM_ALLOC_INT);
break;
}
} while (--poll_count);
/* oh well, wait until the chip finds memory later */
netif_stop_queue(dev);
DBG(2, "%s: TX memory allocation deferred.\n", dev->name);
- SMC_ENABLE_INT(IM_ALLOC_INT);
+ SMC_ENABLE_INT(lp, IM_ALLOC_INT);
} else {
/*
* Allocation succeeded: push packet to the chip's own memory
DBG(3, "%s: %s\n", dev->name, __FUNCTION__);
/* If the TX FIFO is empty then nothing to do */
- packet_no = SMC_GET_TXFIFO();
+ packet_no = SMC_GET_TXFIFO(lp);
if (unlikely(packet_no & TXFIFO_TEMPTY)) {
PRINTK("%s: smc_tx with nothing on FIFO.\n", dev->name);
return;
}
/* select packet to read from */
- saved_packet = SMC_GET_PN();
- SMC_SET_PN(packet_no);
+ saved_packet = SMC_GET_PN(lp);
+ SMC_SET_PN(lp, packet_no);
/* read the first word (status word) from this packet */
- SMC_SET_PTR(PTR_AUTOINC | PTR_READ);
- SMC_GET_PKT_HDR(tx_status, pkt_len);
+ SMC_SET_PTR(lp, PTR_AUTOINC | PTR_READ);
+ SMC_GET_PKT_HDR(lp, tx_status, pkt_len);
DBG(2, "%s: TX STATUS 0x%04x PNR 0x%02x\n",
dev->name, tx_status, packet_no);
}
/* kill the packet */
- SMC_WAIT_MMU_BUSY();
- SMC_SET_MMU_CMD(MC_FREEPKT);
+ SMC_WAIT_MMU_BUSY(lp);
+ SMC_SET_MMU_CMD(lp, MC_FREEPKT);
/* Don't restore Packet Number Reg until busy bit is cleared */
- SMC_WAIT_MMU_BUSY();
- SMC_SET_PN(saved_packet);
+ SMC_WAIT_MMU_BUSY(lp);
+ SMC_SET_PN(lp, saved_packet);
/* re-enable transmit */
- SMC_SELECT_BANK(0);
- SMC_SET_TCR(lp->tcr_cur_mode);
- SMC_SELECT_BANK(2);
+ SMC_SELECT_BANK(lp, 0);
+ SMC_SET_TCR(lp, lp->tcr_cur_mode);
+ SMC_SELECT_BANK(lp, 2);
}
void __iomem *ioaddr = lp->base;
unsigned int mii_reg, mask;
- mii_reg = SMC_GET_MII() & ~(MII_MCLK | MII_MDOE | MII_MDO);
+ mii_reg = SMC_GET_MII(lp) & ~(MII_MCLK | MII_MDOE | MII_MDO);
mii_reg |= MII_MDOE;
for (mask = 1 << (bits - 1); mask; mask >>= 1) {
else
mii_reg &= ~MII_MDO;
- SMC_SET_MII(mii_reg);
+ SMC_SET_MII(lp, mii_reg);
udelay(MII_DELAY);
- SMC_SET_MII(mii_reg | MII_MCLK);
+ SMC_SET_MII(lp, mii_reg | MII_MCLK);
udelay(MII_DELAY);
}
}
void __iomem *ioaddr = lp->base;
unsigned int mii_reg, mask, val;
- mii_reg = SMC_GET_MII() & ~(MII_MCLK | MII_MDOE | MII_MDO);
- SMC_SET_MII(mii_reg);
+ mii_reg = SMC_GET_MII(lp) & ~(MII_MCLK | MII_MDOE | MII_MDO);
+ SMC_SET_MII(lp, mii_reg);
for (mask = 1 << (bits - 1), val = 0; mask; mask >>= 1) {
- if (SMC_GET_MII() & MII_MDI)
+ if (SMC_GET_MII(lp) & MII_MDI)
val |= mask;
- SMC_SET_MII(mii_reg);
+ SMC_SET_MII(lp, mii_reg);
udelay(MII_DELAY);
- SMC_SET_MII(mii_reg | MII_MCLK);
+ SMC_SET_MII(lp, mii_reg | MII_MCLK);
udelay(MII_DELAY);
}
void __iomem *ioaddr = lp->base;
unsigned int phydata;
- SMC_SELECT_BANK(3);
+ SMC_SELECT_BANK(lp, 3);
/* Idle - 32 ones */
smc_mii_out(dev, 0xffffffff, 32);
phydata = smc_mii_in(dev, 18);
/* Return to idle state */
- SMC_SET_MII(SMC_GET_MII() & ~(MII_MCLK|MII_MDOE|MII_MDO));
+ SMC_SET_MII(lp, SMC_GET_MII(lp) & ~(MII_MCLK|MII_MDOE|MII_MDO));
DBG(3, "%s: phyaddr=0x%x, phyreg=0x%x, phydata=0x%x\n",
__FUNCTION__, phyaddr, phyreg, phydata);
- SMC_SELECT_BANK(2);
+ SMC_SELECT_BANK(lp, 2);
return phydata;
}
struct smc_local *lp = netdev_priv(dev);
void __iomem *ioaddr = lp->base;
- SMC_SELECT_BANK(3);
+ SMC_SELECT_BANK(lp, 3);
/* Idle - 32 ones */
smc_mii_out(dev, 0xffffffff, 32);
smc_mii_out(dev, 5 << 28 | phyaddr << 23 | phyreg << 18 | 2 << 16 | phydata, 32);
/* Return to idle state */
- SMC_SET_MII(SMC_GET_MII() & ~(MII_MCLK|MII_MDOE|MII_MDO));
+ SMC_SET_MII(lp, SMC_GET_MII(lp) & ~(MII_MCLK|MII_MDOE|MII_MDO));
DBG(3, "%s: phyaddr=0x%x, phyreg=0x%x, phydata=0x%x\n",
__FUNCTION__, phyaddr, phyreg, phydata);
- SMC_SELECT_BANK(2);
+ SMC_SELECT_BANK(lp, 2);
}
/*
smc_phy_write(dev, phyaddr, MII_BMCR, bmcr);
/* Re-Configure the Receive/Phy Control register */
- SMC_SELECT_BANK(0);
- SMC_SET_RPC(lp->rpc_cur_mode);
- SMC_SELECT_BANK(2);
+ SMC_SELECT_BANK(lp, 0);
+ SMC_SET_RPC(lp, lp->rpc_cur_mode);
+ SMC_SELECT_BANK(lp, 2);
return 1;
}
lp->tcr_cur_mode &= ~TCR_SWFDUP;
}
- SMC_SELECT_BANK(0);
- SMC_SET_TCR(lp->tcr_cur_mode);
+ SMC_SELECT_BANK(lp, 0);
+ SMC_SET_TCR(lp, lp->tcr_cur_mode);
}
}
PHY_INT_SPDDET | PHY_INT_DPLXDET);
/* Configure the Receive/Phy Control register */
- SMC_SELECT_BANK(0);
- SMC_SET_RPC(lp->rpc_cur_mode);
+ SMC_SELECT_BANK(lp, 0);
+ SMC_SET_RPC(lp, lp->rpc_cur_mode);
/* If the user requested no auto neg, then go set his request */
if (lp->mii.force_media) {
smc_phy_check_media(dev, 1);
smc_phy_configure_exit:
- SMC_SELECT_BANK(2);
+ SMC_SELECT_BANK(lp, 2);
spin_unlock_irq(&lp->lock);
lp->work_pending = 0;
}
old_carrier = netif_carrier_ok(dev) ? 1 : 0;
- SMC_SELECT_BANK(0);
- new_carrier = (SMC_GET_EPH_STATUS() & ES_LINK_OK) ? 1 : 0;
- SMC_SELECT_BANK(2);
+ SMC_SELECT_BANK(lp, 0);
+ new_carrier = (SMC_GET_EPH_STATUS(lp) & ES_LINK_OK) ? 1 : 0;
+ SMC_SELECT_BANK(lp, 2);
if (init || (old_carrier != new_carrier)) {
if (!new_carrier) {
smc_10bt_check_media(dev, 0);
- SMC_SELECT_BANK(1);
- ctl = SMC_GET_CTL();
- SMC_SET_CTL(ctl & ~CTL_LE_ENABLE);
- SMC_SET_CTL(ctl);
- SMC_SELECT_BANK(2);
+ SMC_SELECT_BANK(lp, 1);
+ ctl = SMC_GET_CTL(lp);
+ SMC_SET_CTL(lp, ctl & ~CTL_LE_ENABLE);
+ SMC_SET_CTL(lp, ctl);
+ SMC_SELECT_BANK(lp, 2);
}
/*
* ISR. */
SMC_INTERRUPT_PREAMBLE;
- saved_pointer = SMC_GET_PTR();
- mask = SMC_GET_INT_MASK();
- SMC_SET_INT_MASK(0);
+ saved_pointer = SMC_GET_PTR(lp);
+ mask = SMC_GET_INT_MASK(lp);
+ SMC_SET_INT_MASK(lp, 0);
/* set a timeout value, so I don't stay here forever */
timeout = MAX_IRQ_LOOPS;
do {
- status = SMC_GET_INT();
+ status = SMC_GET_INT(lp);
DBG(2, "%s: INT 0x%02x MASK 0x%02x MEM 0x%04x FIFO 0x%04x\n",
dev->name, status, mask,
- ({ int meminfo; SMC_SELECT_BANK(0);
- meminfo = SMC_GET_MIR();
- SMC_SELECT_BANK(2); meminfo; }),
- SMC_GET_FIFO());
+ ({ int meminfo; SMC_SELECT_BANK(lp, 0);
+ meminfo = SMC_GET_MIR(lp);
+ SMC_SELECT_BANK(lp, 2); meminfo; }),
+ SMC_GET_FIFO(lp));
status &= mask;
if (!status)
/* do this before RX as it will free memory quickly */
DBG(3, "%s: TX int\n", dev->name);
smc_tx(dev);
- SMC_ACK_INT(IM_TX_INT);
+ SMC_ACK_INT(lp, IM_TX_INT);
if (THROTTLE_TX_PKTS)
netif_wake_queue(dev);
} else if (status & IM_RCV_INT) {
mask &= ~IM_TX_EMPTY_INT;
/* update stats */
- SMC_SELECT_BANK(0);
- card_stats = SMC_GET_COUNTER();
- SMC_SELECT_BANK(2);
+ SMC_SELECT_BANK(lp, 0);
+ card_stats = SMC_GET_COUNTER(lp);
+ SMC_SELECT_BANK(lp, 2);
/* single collisions */
dev->stats.collisions += card_stats & 0xF;
dev->stats.collisions += card_stats & 0xF;
} else if (status & IM_RX_OVRN_INT) {
DBG(1, "%s: RX overrun (EPH_ST 0x%04x)\n", dev->name,
- ({ int eph_st; SMC_SELECT_BANK(0);
- eph_st = SMC_GET_EPH_STATUS();
- SMC_SELECT_BANK(2); eph_st; }) );
- SMC_ACK_INT(IM_RX_OVRN_INT);
+ ({ int eph_st; SMC_SELECT_BANK(lp, 0);
+ eph_st = SMC_GET_EPH_STATUS(lp);
+ SMC_SELECT_BANK(lp, 2); eph_st; }));
+ SMC_ACK_INT(lp, IM_RX_OVRN_INT);
dev->stats.rx_errors++;
dev->stats.rx_fifo_errors++;
} else if (status & IM_EPH_INT) {
smc_eph_interrupt(dev);
} else if (status & IM_MDINT) {
- SMC_ACK_INT(IM_MDINT);
+ SMC_ACK_INT(lp, IM_MDINT);
smc_phy_interrupt(dev);
} else if (status & IM_ERCV_INT) {
- SMC_ACK_INT(IM_ERCV_INT);
+ SMC_ACK_INT(lp, IM_ERCV_INT);
PRINTK("%s: UNSUPPORTED: ERCV INTERRUPT \n", dev->name);
}
} while (--timeout);
/* restore register states */
- SMC_SET_PTR(saved_pointer);
- SMC_SET_INT_MASK(mask);
+ SMC_SET_PTR(lp, saved_pointer);
+ SMC_SET_INT_MASK(lp, mask);
spin_unlock(&lp->lock);
if (timeout == MAX_IRQ_LOOPS)
DBG(2, "%s: %s\n", dev->name, __FUNCTION__);
spin_lock_irq(&lp->lock);
- status = SMC_GET_INT();
- mask = SMC_GET_INT_MASK();
- fifo = SMC_GET_FIFO();
- SMC_SELECT_BANK(0);
- eph_st = SMC_GET_EPH_STATUS();
- meminfo = SMC_GET_MIR();
- SMC_SELECT_BANK(2);
+ status = SMC_GET_INT(lp);
+ mask = SMC_GET_INT_MASK(lp);
+ fifo = SMC_GET_FIFO(lp);
+ SMC_SELECT_BANK(lp, 0);
+ eph_st = SMC_GET_EPH_STATUS(lp);
+ meminfo = SMC_GET_MIR(lp);
+ SMC_SELECT_BANK(lp, 2);
spin_unlock_irq(&lp->lock);
PRINTK( "%s: TX timeout (INT 0x%02x INTMASK 0x%02x "
"MEM 0x%04x FIFO 0x%04x EPH_ST 0x%04x)\n",
}
spin_lock_irq(&lp->lock);
- SMC_SELECT_BANK(0);
- SMC_SET_RCR(lp->rcr_cur_mode);
+ SMC_SELECT_BANK(lp, 0);
+ SMC_SET_RCR(lp, lp->rcr_cur_mode);
if (update_multicast) {
- SMC_SELECT_BANK(3);
- SMC_SET_MCAST(multicast_table);
+ SMC_SELECT_BANK(lp, 3);
+ SMC_SET_MCAST(lp, multicast_table);
}
- SMC_SELECT_BANK(2);
+ SMC_SELECT_BANK(lp, 2);
spin_unlock_irq(&lp->lock);
}
* I just deleted auto_irq.c, since it was never built...
* --jgarzik
*/
-static int __init smc_findirq(void __iomem *ioaddr)
+static int __init smc_findirq(struct smc_local *lp)
{
+ void __iomem *ioaddr = lp->base;
int timeout = 20;
unsigned long cookie;
* when done.
*/
/* enable ALLOCation interrupts ONLY */
- SMC_SELECT_BANK(2);
- SMC_SET_INT_MASK(IM_ALLOC_INT);
+ SMC_SELECT_BANK(lp, 2);
+ SMC_SET_INT_MASK(lp, IM_ALLOC_INT);
/*
* Allocate 512 bytes of memory. Note that the chip was just
* reset so all the memory is available
*/
- SMC_SET_MMU_CMD(MC_ALLOC | 1);
+ SMC_SET_MMU_CMD(lp, MC_ALLOC | 1);
/*
* Wait until positive that the interrupt has been generated
do {
int int_status;
udelay(10);
- int_status = SMC_GET_INT();
+ int_status = SMC_GET_INT(lp);
if (int_status & IM_ALLOC_INT)
break; /* got the interrupt */
} while (--timeout);
*/
/* and disable all interrupts again */
- SMC_SET_INT_MASK(0);
+ SMC_SET_INT_MASK(lp, 0);
/* and return what I found */
return probe_irq_off(cookie);
DBG(2, "%s: %s\n", CARDNAME, __FUNCTION__);
/* First, see if the high byte is 0x33 */
- val = SMC_CURRENT_BANK();
+ val = SMC_CURRENT_BANK(lp);
DBG(2, "%s: bank signature probe returned 0x%04x\n", CARDNAME, val);
if ((val & 0xFF00) != 0x3300) {
if ((val & 0xFF) == 0x33) {
* The above MIGHT indicate a device, but I need to write to
* further test this.
*/
- SMC_SELECT_BANK(0);
- val = SMC_CURRENT_BANK();
+ SMC_SELECT_BANK(lp, 0);
+ val = SMC_CURRENT_BANK(lp);
if ((val & 0xFF00) != 0x3300) {
retval = -ENODEV;
goto err_out;
* register to bank 1, so I can access the base address
* register
*/
- SMC_SELECT_BANK(1);
- val = SMC_GET_BASE();
+ SMC_SELECT_BANK(lp, 1);
+ val = SMC_GET_BASE(lp);
val = ((val & 0x1F00) >> 3) << SMC_IO_SHIFT;
if (((unsigned int)ioaddr & (0x3e0 << SMC_IO_SHIFT)) != val) {
printk("%s: IOADDR %p doesn't match configuration (%x).\n",
* recognize. These might need to be added to later,
* as future revisions could be added.
*/
- SMC_SELECT_BANK(3);
- revision_register = SMC_GET_REV();
+ SMC_SELECT_BANK(lp, 3);
+ revision_register = SMC_GET_REV(lp);
DBG(2, "%s: revision = 0x%04x\n", CARDNAME, revision_register);
version_string = chip_ids[ (revision_register >> 4) & 0xF];
if (!version_string || (revision_register & 0xff00) != 0x3300) {
spin_lock_init(&lp->lock);
/* Get the MAC address */
- SMC_SELECT_BANK(1);
- SMC_GET_MAC_ADDR(dev->dev_addr);
+ SMC_SELECT_BANK(lp, 1);
+ SMC_GET_MAC_ADDR(lp, dev->dev_addr);
/* now, reset the chip, and put it into a known state */
smc_reset(dev);
trials = 3;
while (trials--) {
- dev->irq = smc_findirq(ioaddr);
+ dev->irq = smc_findirq(lp);
if (dev->irq)
break;
/* kick the card and try again */
// Transmit Control Register
/* BANK 0 */
-#define TCR_REG SMC_REG(0x0000, 0)
+#define TCR_REG(lp) SMC_REG(lp, 0x0000, 0)
#define TCR_ENABLE 0x0001 // When 1 we can transmit
#define TCR_LOOP 0x0002 // Controls output pin LBK
#define TCR_FORCOL 0x0004 // When 1 will force a collision
// EPH Status Register
/* BANK 0 */
-#define EPH_STATUS_REG SMC_REG(0x0002, 0)
+#define EPH_STATUS_REG(lp) SMC_REG(lp, 0x0002, 0)
#define ES_TX_SUC 0x0001 // Last TX was successful
#define ES_SNGL_COL 0x0002 // Single collision detected for last tx
#define ES_MUL_COL 0x0004 // Multiple collisions detected for last tx
// Receive Control Register
/* BANK 0 */
-#define RCR_REG SMC_REG(0x0004, 0)
+#define RCR_REG(lp) SMC_REG(lp, 0x0004, 0)
#define RCR_RX_ABORT 0x0001 // Set if a rx frame was aborted
#define RCR_PRMS 0x0002 // Enable promiscuous mode
#define RCR_ALMUL 0x0004 // When set accepts all multicast frames
// Counter Register
/* BANK 0 */
-#define COUNTER_REG SMC_REG(0x0006, 0)
+#define COUNTER_REG(lp) SMC_REG(lp, 0x0006, 0)
// Memory Information Register
/* BANK 0 */
-#define MIR_REG SMC_REG(0x0008, 0)
+#define MIR_REG(lp) SMC_REG(lp, 0x0008, 0)
// Receive/Phy Control Register
/* BANK 0 */
-#define RPC_REG SMC_REG(0x000A, 0)
+#define RPC_REG(lp) SMC_REG(lp, 0x000A, 0)
#define RPC_SPEED 0x2000 // When 1 PHY is in 100Mbps mode.
#define RPC_DPLX 0x1000 // When 1 PHY is in Full-Duplex Mode
#define RPC_ANEG 0x0800 // When 1 PHY is in Auto-Negotiate Mode
// Configuration Reg
/* BANK 1 */
-#define CONFIG_REG SMC_REG(0x0000, 1)
+#define CONFIG_REG(lp) SMC_REG(lp, 0x0000, 1)
#define CONFIG_EXT_PHY 0x0200 // 1=external MII, 0=internal Phy
#define CONFIG_GPCNTRL 0x0400 // Inverse value drives pin nCNTRL
#define CONFIG_NO_WAIT 0x1000 // When 1 no extra wait states on ISA bus
// Base Address Register
/* BANK 1 */
-#define BASE_REG SMC_REG(0x0002, 1)
+#define BASE_REG(lp) SMC_REG(lp, 0x0002, 1)
// Individual Address Registers
/* BANK 1 */
-#define ADDR0_REG SMC_REG(0x0004, 1)
-#define ADDR1_REG SMC_REG(0x0006, 1)
-#define ADDR2_REG SMC_REG(0x0008, 1)
+#define ADDR0_REG(lp) SMC_REG(lp, 0x0004, 1)
+#define ADDR1_REG(lp) SMC_REG(lp, 0x0006, 1)
+#define ADDR2_REG(lp) SMC_REG(lp, 0x0008, 1)
// General Purpose Register
/* BANK 1 */
-#define GP_REG SMC_REG(0x000A, 1)
+#define GP_REG(lp) SMC_REG(lp, 0x000A, 1)
// Control Register
/* BANK 1 */
-#define CTL_REG SMC_REG(0x000C, 1)
+#define CTL_REG(lp) SMC_REG(lp, 0x000C, 1)
#define CTL_RCV_BAD 0x4000 // When 1 bad CRC packets are received
#define CTL_AUTO_RELEASE 0x0800 // When 1 tx pages are released automatically
#define CTL_LE_ENABLE 0x0080 // When 1 enables Link Error interrupt
// MMU Command Register
/* BANK 2 */
-#define MMU_CMD_REG SMC_REG(0x0000, 2)
+#define MMU_CMD_REG(lp) SMC_REG(lp, 0x0000, 2)
#define MC_BUSY 1 // When 1 the last release has not completed
#define MC_NOP (0<<5) // No Op
#define MC_ALLOC (1<<5) // OR with number of 256 byte packets
// Packet Number Register
/* BANK 2 */
-#define PN_REG SMC_REG(0x0002, 2)
+#define PN_REG(lp) SMC_REG(lp, 0x0002, 2)
// Allocation Result Register
/* BANK 2 */
-#define AR_REG SMC_REG(0x0003, 2)
+#define AR_REG(lp) SMC_REG(lp, 0x0003, 2)
#define AR_FAILED 0x80 // Alocation Failed
// TX FIFO Ports Register
/* BANK 2 */
-#define TXFIFO_REG SMC_REG(0x0004, 2)
+#define TXFIFO_REG(lp) SMC_REG(lp, 0x0004, 2)
#define TXFIFO_TEMPTY 0x80 // TX FIFO Empty
// RX FIFO Ports Register
/* BANK 2 */
-#define RXFIFO_REG SMC_REG(0x0005, 2)
+#define RXFIFO_REG(lp) SMC_REG(lp, 0x0005, 2)
#define RXFIFO_REMPTY 0x80 // RX FIFO Empty
-#define FIFO_REG SMC_REG(0x0004, 2)
+#define FIFO_REG(lp) SMC_REG(lp, 0x0004, 2)
// Pointer Register
/* BANK 2 */
-#define PTR_REG SMC_REG(0x0006, 2)
+#define PTR_REG(lp) SMC_REG(lp, 0x0006, 2)
#define PTR_RCV 0x8000 // 1=Receive area, 0=Transmit area
#define PTR_AUTOINC 0x4000 // Auto increment the pointer on each access
#define PTR_READ 0x2000 // When 1 the operation is a read
// Data Register
/* BANK 2 */
-#define DATA_REG SMC_REG(0x0008, 2)
+#define DATA_REG(lp) SMC_REG(lp, 0x0008, 2)
// Interrupt Status/Acknowledge Register
/* BANK 2 */
-#define INT_REG SMC_REG(0x000C, 2)
+#define INT_REG(lp) SMC_REG(lp, 0x000C, 2)
// Interrupt Mask Register
/* BANK 2 */
-#define IM_REG SMC_REG(0x000D, 2)
+#define IM_REG(lp) SMC_REG(lp, 0x000D, 2)
#define IM_MDINT 0x80 // PHY MI Register 18 Interrupt
#define IM_ERCV_INT 0x40 // Early Receive Interrupt
#define IM_EPH_INT 0x20 // Set by Ethernet Protocol Handler section
// Multicast Table Registers
/* BANK 3 */
-#define MCAST_REG1 SMC_REG(0x0000, 3)
-#define MCAST_REG2 SMC_REG(0x0002, 3)
-#define MCAST_REG3 SMC_REG(0x0004, 3)
-#define MCAST_REG4 SMC_REG(0x0006, 3)
+#define MCAST_REG1(lp) SMC_REG(lp, 0x0000, 3)
+#define MCAST_REG2(lp) SMC_REG(lp, 0x0002, 3)
+#define MCAST_REG3(lp) SMC_REG(lp, 0x0004, 3)
+#define MCAST_REG4(lp) SMC_REG(lp, 0x0006, 3)
// Management Interface Register (MII)
/* BANK 3 */
-#define MII_REG SMC_REG(0x0008, 3)
+#define MII_REG(lp) SMC_REG(lp, 0x0008, 3)
#define MII_MSK_CRS100 0x4000 // Disables CRS100 detection during tx half dup
#define MII_MDOE 0x0008 // MII Output Enable
#define MII_MCLK 0x0004 // MII Clock, pin MDCLK
// Revision Register
/* BANK 3 */
/* ( hi: chip id low: rev # ) */
-#define REV_REG SMC_REG(0x000A, 3)
+#define REV_REG(lp) SMC_REG(lp, 0x000A, 3)
// Early RCV Register
/* BANK 3 */
/* this is NOT on SMC9192 */
-#define ERCV_REG SMC_REG(0x000C, 3)
+#define ERCV_REG(lp) SMC_REG(lp, 0x000C, 3)
#define ERCV_RCV_DISCRD 0x0080 // When 1 discards a packet being received
#define ERCV_THRESHOLD 0x001F // ERCV Threshold Mask
// External Register
/* BANK 7 */
-#define EXT_REG SMC_REG(0x0000, 7)
+#define EXT_REG(lp) SMC_REG(lp, 0x0000, 7)
#define CHIP_9192 3
*/
#if SMC_DEBUG > 0
-#define SMC_REG(reg, bank) \
+#define SMC_REG(lp, reg, bank) \
({ \
- int __b = SMC_CURRENT_BANK(); \
+ int __b = SMC_CURRENT_BANK(lp); \
if (unlikely((__b & ~0xf0) != (0x3300 | bank))) { \
printk( "%s: bank reg screwed (0x%04x)\n", \
CARDNAME, __b ); \
reg<<SMC_IO_SHIFT; \
})
#else
-#define SMC_REG(reg, bank) (reg<<SMC_IO_SHIFT)
+#define SMC_REG(lp, reg, bank) (reg<<SMC_IO_SHIFT)
#endif
/*
*/
#define SMC_MUST_ALIGN_WRITE SMC_CAN_USE_32BIT
-#define SMC_GET_PN() \
- ( SMC_CAN_USE_8BIT ? (SMC_inb(ioaddr, PN_REG)) \
- : (SMC_inw(ioaddr, PN_REG) & 0xFF) )
+#define SMC_GET_PN(lp) \
+ (SMC_CAN_USE_8BIT ? (SMC_inb(ioaddr, PN_REG(lp))) \
+ : (SMC_inw(ioaddr, PN_REG(lp)) & 0xFF))
-#define SMC_SET_PN(x) \
+#define SMC_SET_PN(lp, x) \
do { \
if (SMC_MUST_ALIGN_WRITE) \
- SMC_outl((x)<<16, ioaddr, SMC_REG(0, 2)); \
+ SMC_outl((x)<<16, ioaddr, SMC_REG(lp, 0, 2)); \
else if (SMC_CAN_USE_8BIT) \
- SMC_outb(x, ioaddr, PN_REG); \
+ SMC_outb(x, ioaddr, PN_REG(lp)); \
else \
- SMC_outw(x, ioaddr, PN_REG); \
+ SMC_outw(x, ioaddr, PN_REG(lp)); \
} while (0)
-#define SMC_GET_AR() \
- ( SMC_CAN_USE_8BIT ? (SMC_inb(ioaddr, AR_REG)) \
- : (SMC_inw(ioaddr, PN_REG) >> 8) )
+#define SMC_GET_AR(lp) \
+ (SMC_CAN_USE_8BIT ? (SMC_inb(ioaddr, AR_REG(lp))) \
+ : (SMC_inw(ioaddr, PN_REG(lp)) >> 8))
-#define SMC_GET_TXFIFO() \
- ( SMC_CAN_USE_8BIT ? (SMC_inb(ioaddr, TXFIFO_REG)) \
- : (SMC_inw(ioaddr, TXFIFO_REG) & 0xFF) )
+#define SMC_GET_TXFIFO(lp) \
+ (SMC_CAN_USE_8BIT ? (SMC_inb(ioaddr, TXFIFO_REG(lp))) \
+ : (SMC_inw(ioaddr, TXFIFO_REG(lp)) & 0xFF))
-#define SMC_GET_RXFIFO() \
- ( SMC_CAN_USE_8BIT ? (SMC_inb(ioaddr, RXFIFO_REG)) \
- : (SMC_inw(ioaddr, TXFIFO_REG) >> 8) )
+#define SMC_GET_RXFIFO(lp) \
+ (SMC_CAN_USE_8BIT ? (SMC_inb(ioaddr, RXFIFO_REG(lp))) \
+ : (SMC_inw(ioaddr, TXFIFO_REG(lp)) >> 8))
-#define SMC_GET_INT() \
- ( SMC_CAN_USE_8BIT ? (SMC_inb(ioaddr, INT_REG)) \
- : (SMC_inw(ioaddr, INT_REG) & 0xFF) )
+#define SMC_GET_INT(lp) \
+ (SMC_CAN_USE_8BIT ? (SMC_inb(ioaddr, INT_REG(lp))) \
+ : (SMC_inw(ioaddr, INT_REG(lp)) & 0xFF))
-#define SMC_ACK_INT(x) \
+#define SMC_ACK_INT(lp, x) \
do { \
if (SMC_CAN_USE_8BIT) \
- SMC_outb(x, ioaddr, INT_REG); \
+ SMC_outb(x, ioaddr, INT_REG(lp)); \
else { \
unsigned long __flags; \
int __mask; \
local_irq_save(__flags); \
- __mask = SMC_inw( ioaddr, INT_REG ) & ~0xff; \
- SMC_outw( __mask | (x), ioaddr, INT_REG ); \
+ __mask = SMC_inw(ioaddr, INT_REG(lp)) & ~0xff; \
+ SMC_outw(__mask | (x), ioaddr, INT_REG(lp)); \
local_irq_restore(__flags); \
} \
} while (0)
-#define SMC_GET_INT_MASK() \
- ( SMC_CAN_USE_8BIT ? (SMC_inb(ioaddr, IM_REG)) \
- : (SMC_inw( ioaddr, INT_REG ) >> 8) )
+#define SMC_GET_INT_MASK(lp) \
+ (SMC_CAN_USE_8BIT ? (SMC_inb(ioaddr, IM_REG(lp))) \
+ : (SMC_inw(ioaddr, INT_REG(lp)) >> 8))
-#define SMC_SET_INT_MASK(x) \
+#define SMC_SET_INT_MASK(lp, x) \
do { \
if (SMC_CAN_USE_8BIT) \
- SMC_outb(x, ioaddr, IM_REG); \
+ SMC_outb(x, ioaddr, IM_REG(lp)); \
else \
- SMC_outw((x) << 8, ioaddr, INT_REG); \
+ SMC_outw((x) << 8, ioaddr, INT_REG(lp)); \
} while (0)
-#define SMC_CURRENT_BANK() SMC_inw(ioaddr, BANK_SELECT)
+#define SMC_CURRENT_BANK(lp) SMC_inw(ioaddr, BANK_SELECT)
-#define SMC_SELECT_BANK(x) \
+#define SMC_SELECT_BANK(lp, x) \
do { \
if (SMC_MUST_ALIGN_WRITE) \
SMC_outl((x)<<16, ioaddr, 12<<SMC_IO_SHIFT); \
SMC_outw(x, ioaddr, BANK_SELECT); \
} while (0)
-#define SMC_GET_BASE() SMC_inw(ioaddr, BASE_REG)
+#define SMC_GET_BASE(lp) SMC_inw(ioaddr, BASE_REG(lp))
-#define SMC_SET_BASE(x) SMC_outw(x, ioaddr, BASE_REG)
+#define SMC_SET_BASE(lp, x) SMC_outw(x, ioaddr, BASE_REG(lp))
-#define SMC_GET_CONFIG() SMC_inw(ioaddr, CONFIG_REG)
+#define SMC_GET_CONFIG(lp) SMC_inw(ioaddr, CONFIG_REG(lp))
-#define SMC_SET_CONFIG(x) SMC_outw(x, ioaddr, CONFIG_REG)
+#define SMC_SET_CONFIG(lp, x) SMC_outw(x, ioaddr, CONFIG_REG(lp))
-#define SMC_GET_COUNTER() SMC_inw(ioaddr, COUNTER_REG)
+#define SMC_GET_COUNTER(lp) SMC_inw(ioaddr, COUNTER_REG(lp))
-#define SMC_GET_CTL() SMC_inw(ioaddr, CTL_REG)
+#define SMC_GET_CTL(lp) SMC_inw(ioaddr, CTL_REG(lp))
-#define SMC_SET_CTL(x) SMC_outw(x, ioaddr, CTL_REG)
+#define SMC_SET_CTL(lp, x) SMC_outw(x, ioaddr, CTL_REG(lp))
-#define SMC_GET_MII() SMC_inw(ioaddr, MII_REG)
+#define SMC_GET_MII(lp) SMC_inw(ioaddr, MII_REG(lp))
-#define SMC_SET_MII(x) SMC_outw(x, ioaddr, MII_REG)
+#define SMC_SET_MII(lp, x) SMC_outw(x, ioaddr, MII_REG(lp))
-#define SMC_GET_MIR() SMC_inw(ioaddr, MIR_REG)
+#define SMC_GET_MIR(lp) SMC_inw(ioaddr, MIR_REG(lp))
-#define SMC_SET_MIR(x) SMC_outw(x, ioaddr, MIR_REG)
+#define SMC_SET_MIR(lp, x) SMC_outw(x, ioaddr, MIR_REG(lp))
-#define SMC_GET_MMU_CMD() SMC_inw(ioaddr, MMU_CMD_REG)
+#define SMC_GET_MMU_CMD(lp) SMC_inw(ioaddr, MMU_CMD_REG(lp))
-#define SMC_SET_MMU_CMD(x) SMC_outw(x, ioaddr, MMU_CMD_REG)
+#define SMC_SET_MMU_CMD(lp, x) SMC_outw(x, ioaddr, MMU_CMD_REG(lp))
-#define SMC_GET_FIFO() SMC_inw(ioaddr, FIFO_REG)
+#define SMC_GET_FIFO(lp) SMC_inw(ioaddr, FIFO_REG(lp))
-#define SMC_GET_PTR() SMC_inw(ioaddr, PTR_REG)
+#define SMC_GET_PTR(lp) SMC_inw(ioaddr, PTR_REG(lp))
-#define SMC_SET_PTR(x) \
+#define SMC_SET_PTR(lp, x) \
do { \
if (SMC_MUST_ALIGN_WRITE) \
- SMC_outl((x)<<16, ioaddr, SMC_REG(4, 2)); \
+ SMC_outl((x)<<16, ioaddr, SMC_REG(lp, 4, 2)); \
else \
- SMC_outw(x, ioaddr, PTR_REG); \
+ SMC_outw(x, ioaddr, PTR_REG(lp)); \
} while (0)
-#define SMC_GET_EPH_STATUS() SMC_inw(ioaddr, EPH_STATUS_REG)
+#define SMC_GET_EPH_STATUS(lp) SMC_inw(ioaddr, EPH_STATUS_REG(lp))
-#define SMC_GET_RCR() SMC_inw(ioaddr, RCR_REG)
+#define SMC_GET_RCR(lp) SMC_inw(ioaddr, RCR_REG(lp))
-#define SMC_SET_RCR(x) SMC_outw(x, ioaddr, RCR_REG)
+#define SMC_SET_RCR(lp, x) SMC_outw(x, ioaddr, RCR_REG(lp))
-#define SMC_GET_REV() SMC_inw(ioaddr, REV_REG)
+#define SMC_GET_REV(lp) SMC_inw(ioaddr, REV_REG(lp))
-#define SMC_GET_RPC() SMC_inw(ioaddr, RPC_REG)
+#define SMC_GET_RPC(lp) SMC_inw(ioaddr, RPC_REG(lp))
-#define SMC_SET_RPC(x) \
+#define SMC_SET_RPC(lp, x) \
do { \
if (SMC_MUST_ALIGN_WRITE) \
- SMC_outl((x)<<16, ioaddr, SMC_REG(8, 0)); \
+ SMC_outl((x)<<16, ioaddr, SMC_REG(lp, 8, 0)); \
else \
- SMC_outw(x, ioaddr, RPC_REG); \
+ SMC_outw(x, ioaddr, RPC_REG(lp)); \
} while (0)
-#define SMC_GET_TCR() SMC_inw(ioaddr, TCR_REG)
+#define SMC_GET_TCR(lp) SMC_inw(ioaddr, TCR_REG(lp))
-#define SMC_SET_TCR(x) SMC_outw(x, ioaddr, TCR_REG)
+#define SMC_SET_TCR(lp, x) SMC_outw(x, ioaddr, TCR_REG(lp))
#ifndef SMC_GET_MAC_ADDR
-#define SMC_GET_MAC_ADDR(addr) \
+#define SMC_GET_MAC_ADDR(lp, addr) \
do { \
unsigned int __v; \
- __v = SMC_inw( ioaddr, ADDR0_REG ); \
+ __v = SMC_inw(ioaddr, ADDR0_REG(lp)); \
addr[0] = __v; addr[1] = __v >> 8; \
- __v = SMC_inw( ioaddr, ADDR1_REG ); \
+ __v = SMC_inw(ioaddr, ADDR1_REG(lp)); \
addr[2] = __v; addr[3] = __v >> 8; \
- __v = SMC_inw( ioaddr, ADDR2_REG ); \
+ __v = SMC_inw(ioaddr, ADDR2_REG(lp)); \
addr[4] = __v; addr[5] = __v >> 8; \
} while (0)
#endif
-#define SMC_SET_MAC_ADDR(addr) \
+#define SMC_SET_MAC_ADDR(lp, addr) \
do { \
- SMC_outw( addr[0]|(addr[1] << 8), ioaddr, ADDR0_REG ); \
- SMC_outw( addr[2]|(addr[3] << 8), ioaddr, ADDR1_REG ); \
- SMC_outw( addr[4]|(addr[5] << 8), ioaddr, ADDR2_REG ); \
+ SMC_outw(addr[0]|(addr[1] << 8), ioaddr, ADDR0_REG(lp)); \
+ SMC_outw(addr[2]|(addr[3] << 8), ioaddr, ADDR1_REG(lp)); \
+ SMC_outw(addr[4]|(addr[5] << 8), ioaddr, ADDR2_REG(lp)); \
} while (0)
-#define SMC_SET_MCAST(x) \
+#define SMC_SET_MCAST(lp, x) \
do { \
const unsigned char *mt = (x); \
- SMC_outw( mt[0] | (mt[1] << 8), ioaddr, MCAST_REG1 ); \
- SMC_outw( mt[2] | (mt[3] << 8), ioaddr, MCAST_REG2 ); \
- SMC_outw( mt[4] | (mt[5] << 8), ioaddr, MCAST_REG3 ); \
- SMC_outw( mt[6] | (mt[7] << 8), ioaddr, MCAST_REG4 ); \
+ SMC_outw(mt[0] | (mt[1] << 8), ioaddr, MCAST_REG1(lp)); \
+ SMC_outw(mt[2] | (mt[3] << 8), ioaddr, MCAST_REG2(lp)); \
+ SMC_outw(mt[4] | (mt[5] << 8), ioaddr, MCAST_REG3(lp)); \
+ SMC_outw(mt[6] | (mt[7] << 8), ioaddr, MCAST_REG4(lp)); \
} while (0)
-#define SMC_PUT_PKT_HDR(status, length) \
+#define SMC_PUT_PKT_HDR(lp, status, length) \
do { \
if (SMC_CAN_USE_32BIT) \
- SMC_outl((status) | (length)<<16, ioaddr, DATA_REG); \
+ SMC_outl((status) | (length)<<16, ioaddr, \
+ DATA_REG(lp)); \
else { \
- SMC_outw(status, ioaddr, DATA_REG); \
- SMC_outw(length, ioaddr, DATA_REG); \
+ SMC_outw(status, ioaddr, DATA_REG(lp)); \
+ SMC_outw(length, ioaddr, DATA_REG(lp)); \
} \
} while (0)
-#define SMC_GET_PKT_HDR(status, length) \
+#define SMC_GET_PKT_HDR(lp, status, length) \
do { \
if (SMC_CAN_USE_32BIT) { \
- unsigned int __val = SMC_inl(ioaddr, DATA_REG); \
+ unsigned int __val = SMC_inl(ioaddr, DATA_REG(lp)); \
(status) = __val & 0xffff; \
(length) = __val >> 16; \
} else { \
- (status) = SMC_inw(ioaddr, DATA_REG); \
- (length) = SMC_inw(ioaddr, DATA_REG); \
+ (status) = SMC_inw(ioaddr, DATA_REG(lp)); \
+ (length) = SMC_inw(ioaddr, DATA_REG(lp)); \
} \
} while (0)
-#define SMC_PUSH_DATA(p, l) \
+#define SMC_PUSH_DATA(lp, p, l) \
do { \
if (SMC_CAN_USE_32BIT) { \
void *__ptr = (p); \
void __iomem *__ioaddr = ioaddr; \
if (__len >= 2 && (unsigned long)__ptr & 2) { \
__len -= 2; \
- SMC_outw(*(u16 *)__ptr, ioaddr, DATA_REG); \
+ SMC_outw(*(u16 *)__ptr, ioaddr, \
+ DATA_REG(lp)); \
__ptr += 2; \
} \
if (SMC_CAN_USE_DATACS && lp->datacs) \
__ioaddr = lp->datacs; \
- SMC_outsl(__ioaddr, DATA_REG, __ptr, __len>>2); \
+ SMC_outsl(__ioaddr, DATA_REG(lp), __ptr, __len>>2); \
if (__len & 2) { \
__ptr += (__len & ~3); \
- SMC_outw(*((u16 *)__ptr), ioaddr, DATA_REG); \
+ SMC_outw(*((u16 *)__ptr), ioaddr, \
+ DATA_REG(lp)); \
} \
} else if (SMC_CAN_USE_16BIT) \
- SMC_outsw(ioaddr, DATA_REG, p, (l) >> 1); \
+ SMC_outsw(ioaddr, DATA_REG(lp), p, (l) >> 1); \
else if (SMC_CAN_USE_8BIT) \
- SMC_outsb(ioaddr, DATA_REG, p, l); \
+ SMC_outsb(ioaddr, DATA_REG(lp), p, l); \
} while (0)
-#define SMC_PULL_DATA(p, l) \
+#define SMC_PULL_DATA(lp, p, l) \
do { \
if (SMC_CAN_USE_32BIT) { \
void *__ptr = (p); \
*/ \
__ptr -= 2; \
__len += 2; \
- SMC_SET_PTR(2|PTR_READ|PTR_RCV|PTR_AUTOINC); \
+ SMC_SET_PTR(lp, \
+ 2|PTR_READ|PTR_RCV|PTR_AUTOINC); \
} \
if (SMC_CAN_USE_DATACS && lp->datacs) \
__ioaddr = lp->datacs; \
__len += 2; \
- SMC_insl(__ioaddr, DATA_REG, __ptr, __len>>2); \
+ SMC_insl(__ioaddr, DATA_REG(lp), __ptr, __len>>2); \
} else if (SMC_CAN_USE_16BIT) \
- SMC_insw(ioaddr, DATA_REG, p, (l) >> 1); \
+ SMC_insw(ioaddr, DATA_REG(lp), p, (l) >> 1); \
else if (SMC_CAN_USE_8BIT) \
- SMC_insb(ioaddr, DATA_REG, p, l); \
+ SMC_insb(ioaddr, DATA_REG(lp), p, l); \
} while (0)
#endif /* _SMC91X_H_ */
projects / linux-2.6 / commitdiff