static unsigned int cd_media_dvd_rom = 0;
static unsigned int cd_media_dvd_r = 0;
static unsigned int cd_media_dvd_rw = 0;
+static unsigned int cd_media_dvd_rw_ro = 0; /* restricted overwrite mode */
+static unsigned int cd_media_dvd_rw_seq = 0; /* sequential mode */
static unsigned int cd_media_dvd_ram = 0;
static unsigned int cd_media_dvd_plus_r = 0;
static unsigned int cd_media_dvd_plus_rw = 0;
cd_dvd_ram = 1;
break;
case 0x13:
+ info(udev, "profile 0x%02x media_dvd_rw\n", profile);
+ cd_media_dvd_rw = 1;
+ cd_media_dvd_rw_ro = 1;
+ break;
case 0x14:
info(udev, "profile 0x%02x dvd_rw\n", profile);
cd_dvd_rw = 1;
+ cd_media_dvd_rw_seq = 1;
break;
case 0x1B:
info(udev, "profile 0x%02x dvd_plus_r\n", profile);
if (!cd_media_cd_rom)
cd_media_state = media_status[header[2] & 3];
+ /* fresh DVD-RW in restricted overwite mode reports itself as
+ * "appendable"; change it to "blank" to make it consistent with what
+ * gets reported after blanking, and what userspace expects */
+ if (cd_media_dvd_rw_ro && (header[2] & 3) == 1)
+ cd_media_state = media_status[0];
+
/* DVD+RW discs (and DVD-RW in restricted mode) once formatted are
* always "complete", DVD-RAM are "other" or "complete" if the disc is
* write protected; we need to check the contents if it is blank */
- if ((cd_media_dvd_rw || cd_media_dvd_plus_rw || cd_media_dvd_plus_rw_dl || cd_media_dvd_ram) && (header[2] & 3) > 1) {
+ if ((cd_media_dvd_rw_ro || cd_media_dvd_plus_rw || cd_media_dvd_plus_rw_dl || cd_media_dvd_ram) && (header[2] & 3) > 1) {
unsigned char buffer[17 * 2048];
unsigned char result, len;
int block, offset;