mflr r20 /* Return to switch caller */
mfmsr r22
li r0, MSR_FP
+#ifdef CONFIG_VSX
+BEGIN_FTR_SECTION
+ oris r0,r0,MSR_VSX@h /* Disable VSX */
+END_FTR_SECTION_IFSET(CPU_FTR_VSX)
+#endif /* CONFIG_VSX */
#ifdef CONFIG_ALTIVEC
BEGIN_FTR_SECTION
oris r0,r0,MSR_VEC@h /* Disable altivec */
_GLOBAL(load_up_fpu)
mfmsr r5
ori r5,r5,MSR_FP
+#ifdef CONFIG_VSX
+BEGIN_FTR_SECTION
+ oris r5,r5,MSR_VSX@h
+END_FTR_SECTION_IFSET(CPU_FTR_VSX)
+#endif
SYNC
MTMSRD(r5) /* enable use of fpu now */
isync
beq 1f
toreal(r4)
addi r4,r4,THREAD /* want last_task_used_math->thread */
- SAVE_32FPRS(0, r4)
+ SAVE_32FPVSRS(0, r5, r4)
mffs fr0
stfd fr0,THREAD_FPSCR(r4)
PPC_LL r5,PT_REGS(r4)
#endif
lfd fr0,THREAD_FPSCR(r5)
MTFSF_L(fr0)
- REST_32FPRS(0, r5)
+ REST_32FPVSRS(0, r4, r5)
#ifndef CONFIG_SMP
subi r4,r5,THREAD
fromreal(r4)
_GLOBAL(giveup_fpu)
mfmsr r5
ori r5,r5,MSR_FP
+#ifdef CONFIG_VSX
+BEGIN_FTR_SECTION
+ oris r5,r5,MSR_VSX@h
+END_FTR_SECTION_IFSET(CPU_FTR_VSX)
+#endif
SYNC_601
ISYNC_601
MTMSRD(r5) /* enable use of fpu now */
addi r3,r3,THREAD /* want THREAD of task */
PPC_LL r5,PT_REGS(r3)
PPC_LCMPI 0,r5,0
- SAVE_32FPRS(0, r3)
+ SAVE_32FPVSRS(0, r4 ,r3)
mffs fr0
stfd fr0,THREAD_FPSCR(r3)
beq 1f
. = 0xf20
b altivec_unavailable_pSeries
+ . = 0xf40
+ b vsx_unavailable_pSeries
+
#ifdef CONFIG_CBE_RAS
HSTD_EXCEPTION_PSERIES(0x1200, cbe_system_error)
#endif /* CONFIG_CBE_RAS */
/* moved from 0xf00 */
STD_EXCEPTION_PSERIES(., performance_monitor)
STD_EXCEPTION_PSERIES(., altivec_unavailable)
+ STD_EXCEPTION_PSERIES(., vsx_unavailable)
/*
* An interrupt came in while soft-disabled; clear EE in SRR1,
blr
#endif /* CONFIG_ALTIVEC */
+ .align 7
+ .globl vsx_unavailable_common
+vsx_unavailable_common:
+ EXCEPTION_PROLOG_COMMON(0xf40, PACA_EXGEN)
+#ifdef CONFIG_VSX
+BEGIN_FTR_SECTION
+ bne .load_up_vsx
+1:
+END_FTR_SECTION_IFSET(CPU_FTR_VSX)
+#endif
+ bl .save_nvgprs
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ ENABLE_INTS
+ bl .vsx_unavailable_exception
+ b .ret_from_except
+
+#ifdef CONFIG_VSX
+/*
+ * load_up_vsx(unused, unused, tsk)
+ * Disable VSX for the task which had it previously,
+ * and save its vector registers in its thread_struct.
+ * Reuse the fp and vsx saves, but first check to see if they have
+ * been saved already.
+ * On entry: r13 == 'current' && last_task_used_vsx != 'current'
+ */
+_STATIC(load_up_vsx)
+/* Load FP and VSX registers if they haven't been done yet */
+ andi. r5,r12,MSR_FP
+ beql+ load_up_fpu /* skip if already loaded */
+ andis. r5,r12,MSR_VEC@h
+ beql+ load_up_altivec /* skip if already loaded */
+
+#ifndef CONFIG_SMP
+ ld r3,last_task_used_vsx@got(r2)
+ ld r4,0(r3)
+ cmpdi 0,r4,0
+ beq 1f
+ /* Disable VSX for last_task_used_vsx */
+ addi r4,r4,THREAD
+ ld r5,PT_REGS(r4)
+ ld r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+ lis r6,MSR_VSX@h
+ andc r6,r4,r6
+ std r6,_MSR-STACK_FRAME_OVERHEAD(r5)
+1:
+#endif /* CONFIG_SMP */
+ ld r4,PACACURRENT(r13)
+ addi r4,r4,THREAD /* Get THREAD */
+ li r6,1
+ stw r6,THREAD_USED_VSR(r4) /* ... also set thread used vsr */
+ /* enable use of VSX after return */
+ oris r12,r12,MSR_VSX@h
+ std r12,_MSR(r1)
+#ifndef CONFIG_SMP
+ /* Update last_task_used_math to 'current' */
+ ld r4,PACACURRENT(r13)
+ std r4,0(r3)
+#endif /* CONFIG_SMP */
+ b fast_exception_return
+#endif /* CONFIG_VSX */
+
/*
* Hash table stuff
*/
#endif /* CONFIG_ALTIVEC */
+#ifdef CONFIG_VSX
+/*
+ * giveup_vsx(tsk)
+ * Disable VSX for the task given as the argument,
+ * and save the vector registers in its thread_struct.
+ * Enables the VSX for use in the kernel on return.
+ */
+_GLOBAL(giveup_vsx)
+ mfmsr r5
+ oris r5,r5,MSR_VSX@h
+ mtmsrd r5 /* enable use of VSX now */
+ isync
+
+ cmpdi 0,r3,0
+ beqlr- /* if no previous owner, done */
+ addi r3,r3,THREAD /* want THREAD of task */
+ ld r5,PT_REGS(r3)
+ cmpdi 0,r5,0
+ beq 1f
+ ld r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+ lis r3,MSR_VSX@h
+ andc r4,r4,r3 /* disable VSX for previous task */
+ std r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+1:
+#ifndef CONFIG_SMP
+ li r5,0
+ ld r4,last_task_used_vsx@got(r2)
+ std r5,0(r4)
+#endif /* CONFIG_SMP */
+ blr
+
+#endif /* CONFIG_VSX */
+
/* kexec_wait(phys_cpu)
*
* wait for the flag to change, indicating this kernel is going away but
elf_fpregset_t mc_fregs;
unsigned int mc_pad[2];
elf_vrregset_t32 mc_vregs __attribute__((__aligned__(16)));
+ elf_vsrreghalf_t32 mc_vsregs __attribute__((__aligned__(16)));
};
struct ucontext32 {
#ifdef CONFIG_ALTIVEC
EXPORT_SYMBOL(giveup_altivec);
#endif /* CONFIG_ALTIVEC */
+#ifdef CONFIG_VSX
+EXPORT_SYMBOL(giveup_vsx);
+#endif /* CONFIG_VSX */
#ifdef CONFIG_SPE
EXPORT_SYMBOL(giveup_spe);
#endif /* CONFIG_SPE */
#ifndef CONFIG_SMP
struct task_struct *last_task_used_math = NULL;
struct task_struct *last_task_used_altivec = NULL;
+struct task_struct *last_task_used_vsx = NULL;
struct task_struct *last_task_used_spe = NULL;
#endif
int dump_task_fpu(struct task_struct *tsk, elf_fpregset_t *fpregs)
{
+#ifdef CONFIG_VSX
+ int i;
+ elf_fpreg_t *reg;
+#endif
+
if (!tsk->thread.regs)
return 0;
flush_fp_to_thread(current);
+#ifdef CONFIG_VSX
+ reg = (elf_fpreg_t *)fpregs;
+ for (i = 0; i < ELF_NFPREG - 1; i++, reg++)
+ *reg = tsk->thread.TS_FPR(i);
+ memcpy(reg, &tsk->thread.fpscr, sizeof(elf_fpreg_t));
+#else
memcpy(fpregs, &tsk->thread.TS_FPR(0), sizeof(*fpregs));
+#endif
return 1;
}
}
}
-int dump_task_altivec(struct task_struct *tsk, elf_vrregset_t *vrregs)
+int dump_task_altivec(struct task_struct *tsk, elf_vrreg_t *vrregs)
{
/* ELF_NVRREG includes the VSCR and VRSAVE which we need to save
* separately, see below */
}
#endif /* CONFIG_ALTIVEC */
+#ifdef CONFIG_VSX
+#if 0
+/* not currently used, but some crazy RAID module might want to later */
+void enable_kernel_vsx(void)
+{
+ WARN_ON(preemptible());
+
+#ifdef CONFIG_SMP
+ if (current->thread.regs && (current->thread.regs->msr & MSR_VSX))
+ giveup_vsx(current);
+ else
+ giveup_vsx(NULL); /* just enable vsx for kernel - force */
+#else
+ giveup_vsx(last_task_used_vsx);
+#endif /* CONFIG_SMP */
+}
+EXPORT_SYMBOL(enable_kernel_vsx);
+#endif
+
+void flush_vsx_to_thread(struct task_struct *tsk)
+{
+ if (tsk->thread.regs) {
+ preempt_disable();
+ if (tsk->thread.regs->msr & MSR_VSX) {
+#ifdef CONFIG_SMP
+ BUG_ON(tsk != current);
+#endif
+ giveup_vsx(tsk);
+ }
+ preempt_enable();
+ }
+}
+
+/*
+ * This dumps the lower half 64bits of the first 32 VSX registers.
+ * This needs to be called with dump_task_fp and dump_task_altivec to
+ * get all the VSX state.
+ */
+int dump_task_vsx(struct task_struct *tsk, elf_vrreg_t *vrregs)
+{
+ elf_vrreg_t *reg;
+ double buf[32];
+ int i;
+
+ if (tsk == current)
+ flush_vsx_to_thread(tsk);
+
+ reg = (elf_vrreg_t *)vrregs;
+
+ for (i = 0; i < 32 ; i++)
+ buf[i] = current->thread.fpr[i][TS_VSRLOWOFFSET];
+ memcpy(reg, buf, sizeof(buf));
+
+ return 1;
+}
+#endif /* CONFIG_VSX */
+
+int dump_task_vector(struct task_struct *tsk, elf_vrregset_t *vrregs)
+{
+ int rc = 0;
+ elf_vrreg_t *regs = (elf_vrreg_t *)vrregs;
+#ifdef CONFIG_ALTIVEC
+ rc = dump_task_altivec(tsk, regs);
+ if (rc)
+ return rc;
+ regs += ELF_NVRREG;
+#endif
+
+#ifdef CONFIG_VSX
+ rc = dump_task_vsx(tsk, regs);
+#endif
+ return rc;
+}
+
#ifdef CONFIG_SPE
void enable_kernel_spe(void)
if (last_task_used_altivec == current)
last_task_used_altivec = NULL;
#endif /* CONFIG_ALTIVEC */
+#ifdef CONFIG_VSX
+ if (last_task_used_vsx == current)
+ last_task_used_vsx = NULL;
+#endif /* CONFIG_VSX */
#ifdef CONFIG_SPE
if (last_task_used_spe == current)
last_task_used_spe = NULL;
if (prev->thread.regs && (prev->thread.regs->msr & MSR_VEC))
giveup_altivec(prev);
#endif /* CONFIG_ALTIVEC */
+#ifdef CONFIG_VSX
+ if (prev->thread.regs && (prev->thread.regs->msr & MSR_VSX))
+ giveup_vsx(prev);
+#endif /* CONFIG_VSX */
#ifdef CONFIG_SPE
/*
* If the previous thread used spe in the last quantum
if (new->thread.regs && last_task_used_altivec == new)
new->thread.regs->msr |= MSR_VEC;
#endif /* CONFIG_ALTIVEC */
+#ifdef CONFIG_VSX
+ if (new->thread.regs && last_task_used_vsx == new)
+ new->thread.regs->msr |= MSR_VSX;
+#endif /* CONFIG_VSX */
#ifdef CONFIG_SPE
/* Avoid the trap. On smp this this never happens since
* we don't set last_task_used_spe
{MSR_EE, "EE"},
{MSR_PR, "PR"},
{MSR_FP, "FP"},
+ {MSR_VEC, "VEC"},
+ {MSR_VSX, "VSX"},
{MSR_ME, "ME"},
{MSR_IR, "IR"},
{MSR_DR, "DR"},
{
flush_fp_to_thread(current);
flush_altivec_to_thread(current);
+ flush_vsx_to_thread(current);
flush_spe_to_thread(current);
}
#endif
discard_lazy_cpu_state();
+#ifdef CONFIG_VSX
+ current->thread.used_vsr = 0;
+#endif
memset(current->thread.fpr, 0, sizeof(current->thread.fpr));
current->thread.fpscr.val = 0;
#ifdef CONFIG_ALTIVEC
}
#endif /* CONFIG_ALTIVEC */
+#ifdef CONFIG_VSX
+/*
+ * Currently to set and and get all the vsx state, you need to call
+ * the fp and VMX calls aswell. This only get/sets the lower 32
+ * 128bit VSX registers.
+ */
+
+static int vsr_active(struct task_struct *target,
+ const struct user_regset *regset)
+{
+ flush_vsx_to_thread(target);
+ return target->thread.used_vsr ? regset->n : 0;
+}
+
+static int vsr_get(struct task_struct *target, const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ void *kbuf, void __user *ubuf)
+{
+ int ret;
+
+ flush_vsx_to_thread(target);
+
+ ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+ target->thread.fpr, 0,
+ 32 * sizeof(vector128));
+
+ return ret;
+}
+
+static int vsr_set(struct task_struct *target, const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ const void *kbuf, const void __user *ubuf)
+{
+ int ret;
+
+ flush_vsx_to_thread(target);
+
+ ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+ target->thread.fpr, 0,
+ 32 * sizeof(vector128));
+
+ return ret;
+}
+#endif /* CONFIG_VSX */
+
#ifdef CONFIG_SPE
/*
#ifdef CONFIG_ALTIVEC
REGSET_VMX,
#endif
+#ifdef CONFIG_VSX
+ REGSET_VSX,
+#endif
#ifdef CONFIG_SPE
REGSET_SPE,
#endif
.active = vr_active, .get = vr_get, .set = vr_set
},
#endif
+#ifdef CONFIG_VSX
+ [REGSET_VSX] = {
+ .n = 32,
+ .size = sizeof(vector128), .align = sizeof(vector128),
+ .active = vsr_active, .get = vsr_get, .set = vsr_set
+ },
+#endif
#ifdef CONFIG_SPE
[REGSET_SPE] = {
.n = 35,
sizeof(u32)),
(const void __user *) data);
#endif
+#ifdef CONFIG_VSX
+ case PTRACE_GETVSRREGS:
+ return copy_regset_to_user(child, &user_ppc_native_view,
+ REGSET_VSX,
+ 0, (32 * sizeof(vector128) +
+ sizeof(u32)),
+ (void __user *) data);
+
+ case PTRACE_SETVSRREGS:
+ return copy_regset_from_user(child, &user_ppc_native_view,
+ REGSET_VSX,
+ 0, (32 * sizeof(vector128) +
+ sizeof(u32)),
+ (const void __user *) data);
+#endif
#ifdef CONFIG_SPE
case PTRACE_GETEVRREGS:
/* Get the child spe register state. */
memcpy(&buf[i], ¤t->thread.fpscr, sizeof(double));
if (__copy_to_user(&frame->mc_fregs, buf, ELF_NFPREG * sizeof(double)))
return 1;
+ /*
+ * Copy VSR 0-31 upper half from thread_struct to local
+ * buffer, then write that to userspace. Also set MSR_VSX in
+ * the saved MSR value to indicate that frame->mc_vregs
+ * contains valid data
+ */
+ if (current->thread.used_vsr) {
+ flush_vsx_to_thread(current);
+ for (i = 0; i < 32 ; i++)
+ buf[i] = current->thread.fpr[i][TS_VSRLOWOFFSET];
+ if (__copy_to_user(&frame->mc_vsregs, buf,
+ ELF_NVSRHALFREG * sizeof(double)))
+ return 1;
+ msr |= MSR_VSX;
+ }
#else
/* save floating-point registers */
if (__copy_to_user(&frame->mc_fregs, current->thread.fpr,
for (i = 0; i < 32 ; i++)
current->thread.TS_FPR(i) = buf[i];
memcpy(¤t->thread.fpscr, &buf[i], sizeof(double));
+ /*
+ * Force the process to reload the VSX registers from
+ * current->thread when it next does VSX instruction.
+ */
+ regs->msr &= ~MSR_VSX;
+ if (msr & MSR_VSX) {
+ /*
+ * Restore altivec registers from the stack to a local
+ * buffer, then write this out to the thread_struct
+ */
+ if (__copy_from_user(buf, &sr->mc_vsregs,
+ sizeof(sr->mc_vsregs)))
+ return 1;
+ for (i = 0; i < 32 ; i++)
+ current->thread.fpr[i][TS_VSRLOWOFFSET] = buf[i];
+ } else if (current->thread.used_vsr)
+ for (i = 0; i < 32 ; i++)
+ current->thread.fpr[i][TS_VSRLOWOFFSET] = 0;
#else
if (__copy_from_user(current->thread.fpr, &sr->mc_fregs,
sizeof(sr->mc_fregs)))
buf[i] = current->thread.TS_FPR(i);
memcpy(&buf[i], ¤t->thread.fpscr, sizeof(double));
err |= __copy_to_user(&sc->fp_regs, buf, FP_REGS_SIZE);
+ /*
+ * Copy VSX low doubleword to local buffer for formatting,
+ * then out to userspace. Update v_regs to point after the
+ * VMX data.
+ */
+ if (current->thread.used_vsr) {
+ flush_vsx_to_thread(current);
+ v_regs += ELF_NVRREG;
+ for (i = 0; i < 32 ; i++)
+ buf[i] = current->thread.fpr[i][TS_VSRLOWOFFSET];
+ err |= __copy_to_user(v_regs, buf, 32 * sizeof(double));
+ /* set MSR_VSX in the MSR value in the frame to
+ * indicate that sc->vs_reg) contains valid data.
+ */
+ msr |= MSR_VSX;
+ }
#else /* CONFIG_VSX */
/* copy fpr regs and fpscr */
err |= __copy_to_user(&sc->fp_regs, ¤t->thread.fpr, FP_REGS_SIZE);
* This has to be done before copying stuff into current->thread.fpr/vr
* for the reasons explained in the previous comment.
*/
- regs->msr &= ~(MSR_FP | MSR_FE0 | MSR_FE1 | MSR_VEC);
+ regs->msr &= ~(MSR_FP | MSR_FE0 | MSR_FE1 | MSR_VEC | MSR_VSX);
#ifdef CONFIG_ALTIVEC
err |= __get_user(v_regs, &sc->v_regs);
current->thread.TS_FPR(i) = buf[i];
memcpy(¤t->thread.fpscr, &buf[i], sizeof(double));
+ /*
+ * Get additional VSX data. Update v_regs to point after the
+ * VMX data. Copy VSX low doubleword from userspace to local
+ * buffer for formatting, then into the taskstruct.
+ */
+ v_regs += ELF_NVRREG;
+ if ((msr & MSR_VSX) != 0)
+ err |= __copy_from_user(buf, v_regs, 32 * sizeof(double));
+ else
+ memset(buf, 0, 32 * sizeof(double));
+
+ for (i = 0; i < 32 ; i++)
+ current->thread.fpr[i][TS_VSRLOWOFFSET] = buf[i];
#else
err |= __copy_from_user(¤t->thread.fpr, &sc->fp_regs, FP_REGS_SIZE);
#endif
die("Unrecoverable VMX/Altivec Unavailable Exception", regs, SIGABRT);
}
+void vsx_unavailable_exception(struct pt_regs *regs)
+{
+ if (user_mode(regs)) {
+ /* A user program has executed an vsx instruction,
+ but this kernel doesn't support vsx. */
+ _exception(SIGILL, regs, ILL_ILLOPC, regs->nip);
+ return;
+ }
+
+ printk(KERN_EMERG "Unrecoverable VSX Unavailable Exception "
+ "%lx at %lx\n", regs->trap, regs->nip);
+ die("Unrecoverable VSX Unavailable Exception", regs, SIGABRT);
+}
+
void performance_monitor_exception(struct pt_regs *regs)
{
perf_irq(regs);
}
#endif /* CONFIG_ALTIVEC */
+#ifdef CONFIG_VSX
+void vsx_assist_exception(struct pt_regs *regs)
+{
+ if (!user_mode(regs)) {
+ printk(KERN_EMERG "VSX assist exception in kernel mode"
+ " at %lx\n", regs->nip);
+ die("Kernel VSX assist exception", regs, SIGILL);
+ }
+
+ flush_vsx_to_thread(current);
+ printk(KERN_INFO "VSX assist not supported at %lx\n", regs->nip);
+ _exception(SIGILL, regs, ILL_ILLOPC, regs->nip);
+}
+#endif /* CONFIG_VSX */
+
#ifdef CONFIG_FSL_BOOKE
void CacheLockingException(struct pt_regs *regs, unsigned long address,
unsigned long error_code)
#ifdef __powerpc64__
# define ELF_NVRREG32 33 /* includes vscr & vrsave stuffed together */
# define ELF_NVRREG 34 /* includes vscr & vrsave in split vectors */
+# define ELF_NVSRHALFREG 32 /* Half the vsx registers */
# define ELF_GREG_TYPE elf_greg_t64
#else
# define ELF_NEVRREG 34 /* includes acc (as 2) */
typedef elf_vrreg_t elf_vrregset_t[ELF_NVRREG];
#ifdef __powerpc64__
typedef elf_vrreg_t elf_vrregset_t32[ELF_NVRREG32];
+typedef elf_fpreg_t elf_vsrreghalf_t32[ELF_NVSRHALFREG];
#endif
#ifdef __KERNEL__
typedef elf_vrregset_t elf_fpxregset_t;
#ifdef CONFIG_ALTIVEC
-extern int dump_task_altivec(struct task_struct *, elf_vrregset_t *vrregs);
-#define ELF_CORE_COPY_XFPREGS(tsk, regs) dump_task_altivec(tsk, regs)
+extern int dump_task_vector(struct task_struct *, elf_vrregset_t *vrregs);
+#define ELF_CORE_COPY_XFPREGS(tsk, regs) dump_task_vector(tsk, regs)
#define ELF_CORE_XFPREG_TYPE NT_PPC_VMX
#endif
#define PT_VRSAVE_32 (PT_VR0 + 33*4)
#endif
+/*
+ * Only store first 32 VSRs here. The second 32 VSRs in VR0-31
+ */
+#define PT_VSR0 150 /* each VSR reg occupies 2 slots in 64-bit */
+#define PT_VSR31 (PT_VSR0 + 2*31)
+#ifdef __KERNEL__
+#define PT_VSR0_32 300 /* each VSR reg occupies 4 slots in 32-bit */
+#endif
#endif /* __powerpc64__ */
/*
#define PTRACE_GETEVRREGS 20
#define PTRACE_SETEVRREGS 21
+/* Get the first 32 128bit VSX registers */
+#define PTRACE_GETVSRREGS 27
+#define PTRACE_SETVSRREGS 28
+
/*
* Get or set a debug register. The first 16 are DABR registers and the
* second 16 are IABR registers.
#define MSR_ISF_LG 61 /* Interrupt 64b mode valid on 630 */
#define MSR_HV_LG 60 /* Hypervisor state */
#define MSR_VEC_LG 25 /* Enable AltiVec */
+#define MSR_VSX_LG 23 /* Enable VSX */
#define MSR_POW_LG 18 /* Enable Power Management */
#define MSR_WE_LG 18 /* Wait State Enable */
#define MSR_TGPR_LG 17 /* TLB Update registers in use */
#endif
#define MSR_VEC __MASK(MSR_VEC_LG) /* Enable AltiVec */
+#define MSR_VSX __MASK(MSR_VSX_LG) /* Enable VSX */
#define MSR_POW __MASK(MSR_POW_LG) /* Enable Power Management */
#define MSR_WE __MASK(MSR_WE_LG) /* Wait State Enable */
#define MSR_TGPR __MASK(MSR_TGPR_LG) /* TLB Update registers in use */
* it must be copied via a vector register to/from storage) or as a word.
* The entry with index 33 contains the vrsave as the first word (offset 0)
* within the quadword.
+ *
+ * Part of the VSX data is stored here also by extending vmx_restore
+ * by an additional 32 double words. Architecturally the layout of
+ * the VSR registers and how they overlap on top of the legacy FPR and
+ * VR registers is shown below:
+ *
+ * VSR doubleword 0 VSR doubleword 1
+ * ----------------------------------------------------------------
+ * VSR[0] | FPR[0] | |
+ * ----------------------------------------------------------------
+ * VSR[1] | FPR[1] | |
+ * ----------------------------------------------------------------
+ * | ... | |
+ * | ... | |
+ * ----------------------------------------------------------------
+ * VSR[30] | FPR[30] | |
+ * ----------------------------------------------------------------
+ * VSR[31] | FPR[31] | |
+ * ----------------------------------------------------------------
+ * VSR[32] | VR[0] |
+ * ----------------------------------------------------------------
+ * VSR[33] | VR[1] |
+ * ----------------------------------------------------------------
+ * | ... |
+ * | ... |
+ * ----------------------------------------------------------------
+ * VSR[62] | VR[30] |
+ * ----------------------------------------------------------------
+ * VSR[63] | VR[31] |
+ * ----------------------------------------------------------------
+ *
+ * FPR/VSR 0-31 doubleword 0 is stored in fp_regs, and VMX/VSR 32-63
+ * is stored at the start of vmx_reserve. vmx_reserve is extended for
+ * backwards compatility to store VSR 0-31 doubleword 1 after the VMX
+ * registers and vscr/vrsave.
*/
elf_vrreg_t __user *v_regs;
- long vmx_reserve[ELF_NVRREG+ELF_NVRREG+1];
+ long vmx_reserve[ELF_NVRREG+ELF_NVRREG+32+1];
#endif
};
extern void giveup_altivec(struct task_struct *);
extern void load_up_altivec(struct task_struct *);
extern int emulate_altivec(struct pt_regs *);
+extern void giveup_vsx(struct task_struct *);
extern void enable_kernel_spe(void);
extern void giveup_spe(struct task_struct *);
extern void load_up_spe(struct task_struct *);
}
#endif
+#ifdef CONFIG_VSX
+extern void flush_vsx_to_thread(struct task_struct *);
+#else
+static inline void flush_vsx_to_thread(struct task_struct *t)
+{
+}
+#endif
+
#ifdef CONFIG_SPE
extern void flush_spe_to_thread(struct task_struct *);
#else
projects / linux-2.6 / commitdiff