obj-y := shutdown.o
-obj-$(CONFIG_PM_SLEEP) += main.o suspend.o resume.o sysfs.o
+obj-$(CONFIG_PM_SLEEP) += main.o sysfs.o
obj-$(CONFIG_PM_TRACE) += trace.o
ifeq ($(CONFIG_DEBUG_DRIVER),y)
*/
#include <linux/device.h>
+#include <linux/kallsyms.h>
#include <linux/mutex.h>
+#include <linux/pm.h>
+#include <linux/resume-trace.h>
+#include "../base.h"
#include "power.h"
LIST_HEAD(dpm_active);
-LIST_HEAD(dpm_off);
-LIST_HEAD(dpm_off_irq);
+static LIST_HEAD(dpm_off);
+static LIST_HEAD(dpm_off_irq);
-DEFINE_MUTEX(dpm_mtx);
-DEFINE_MUTEX(dpm_list_mtx);
+static DEFINE_MUTEX(dpm_mtx);
+static DEFINE_MUTEX(dpm_list_mtx);
int (*platform_enable_wakeup)(struct device *dev, int is_on);
+
int device_pm_add(struct device *dev)
{
int error;
}
+/*------------------------- Resume routines -------------------------*/
+
+/**
+ * resume_device - Restore state for one device.
+ * @dev: Device.
+ *
+ */
+
+static int resume_device(struct device * dev)
+{
+ int error = 0;
+
+ TRACE_DEVICE(dev);
+ TRACE_RESUME(0);
+
+ down(&dev->sem);
+
+ if (dev->bus && dev->bus->resume) {
+ dev_dbg(dev,"resuming\n");
+ error = dev->bus->resume(dev);
+ }
+
+ if (!error && dev->type && dev->type->resume) {
+ dev_dbg(dev,"resuming\n");
+ error = dev->type->resume(dev);
+ }
+
+ if (!error && dev->class && dev->class->resume) {
+ dev_dbg(dev,"class resume\n");
+ error = dev->class->resume(dev);
+ }
+
+ up(&dev->sem);
+
+ TRACE_RESUME(error);
+ return error;
+}
+
+
+static int resume_device_early(struct device * dev)
+{
+ int error = 0;
+
+ TRACE_DEVICE(dev);
+ TRACE_RESUME(0);
+ if (dev->bus && dev->bus->resume_early) {
+ dev_dbg(dev,"EARLY resume\n");
+ error = dev->bus->resume_early(dev);
+ }
+ TRACE_RESUME(error);
+ return error;
+}
+
+/*
+ * Resume the devices that have either not gone through
+ * the late suspend, or that did go through it but also
+ * went through the early resume
+ */
+static void dpm_resume(void)
+{
+ mutex_lock(&dpm_list_mtx);
+ while(!list_empty(&dpm_off)) {
+ struct list_head * entry = dpm_off.next;
+ struct device * dev = to_device(entry);
+
+ get_device(dev);
+ list_move_tail(entry, &dpm_active);
+
+ mutex_unlock(&dpm_list_mtx);
+ resume_device(dev);
+ mutex_lock(&dpm_list_mtx);
+ put_device(dev);
+ }
+ mutex_unlock(&dpm_list_mtx);
+}
+
+
+/**
+ * device_resume - Restore state of each device in system.
+ *
+ * Walk the dpm_off list, remove each entry, resume the device,
+ * then add it to the dpm_active list.
+ */
+
+void device_resume(void)
+{
+ might_sleep();
+ mutex_lock(&dpm_mtx);
+ dpm_resume();
+ mutex_unlock(&dpm_mtx);
+}
+
+EXPORT_SYMBOL_GPL(device_resume);
+
+
+/**
+ * dpm_power_up - Power on some devices.
+ *
+ * Walk the dpm_off_irq list and power each device up. This
+ * is used for devices that required they be powered down with
+ * interrupts disabled. As devices are powered on, they are moved
+ * to the dpm_active list.
+ *
+ * Interrupts must be disabled when calling this.
+ */
+
+static void dpm_power_up(void)
+{
+ while(!list_empty(&dpm_off_irq)) {
+ struct list_head * entry = dpm_off_irq.next;
+ struct device * dev = to_device(entry);
+
+ list_move_tail(entry, &dpm_off);
+ resume_device_early(dev);
+ }
+}
+
+
+/**
+ * device_power_up - Turn on all devices that need special attention.
+ *
+ * Power on system devices then devices that required we shut them down
+ * with interrupts disabled.
+ * Called with interrupts disabled.
+ */
+
+void device_power_up(void)
+{
+ sysdev_resume();
+ dpm_power_up();
+}
+
+EXPORT_SYMBOL_GPL(device_power_up);
+
+
+/*------------------------- Suspend routines -------------------------*/
+
+/*
+ * The entries in the dpm_active list are in a depth first order, simply
+ * because children are guaranteed to be discovered after parents, and
+ * are inserted at the back of the list on discovery.
+ *
+ * All list on the suspend path are done in reverse order, so we operate
+ * on the leaves of the device tree (or forests, depending on how you want
+ * to look at it ;) first. As nodes are removed from the back of the list,
+ * they are inserted into the front of their destintation lists.
+ *
+ * Things are the reverse on the resume path - iterations are done in
+ * forward order, and nodes are inserted at the back of their destination
+ * lists. This way, the ancestors will be accessed before their descendents.
+ */
+
+static inline char *suspend_verb(u32 event)
+{
+ switch (event) {
+ case PM_EVENT_SUSPEND: return "suspend";
+ case PM_EVENT_FREEZE: return "freeze";
+ case PM_EVENT_PRETHAW: return "prethaw";
+ default: return "(unknown suspend event)";
+ }
+}
+
+
+static void
+suspend_device_dbg(struct device *dev, pm_message_t state, char *info)
+{
+ dev_dbg(dev, "%s%s%s\n", info, suspend_verb(state.event),
+ ((state.event == PM_EVENT_SUSPEND) && device_may_wakeup(dev)) ?
+ ", may wakeup" : "");
+}
+
+/**
+ * suspend_device - Save state of one device.
+ * @dev: Device.
+ * @state: Power state device is entering.
+ */
+
+static int suspend_device(struct device * dev, pm_message_t state)
+{
+ int error = 0;
+
+ down(&dev->sem);
+ if (dev->power.power_state.event) {
+ dev_dbg(dev, "PM: suspend %d-->%d\n",
+ dev->power.power_state.event, state.event);
+ }
+
+ if (dev->class && dev->class->suspend) {
+ suspend_device_dbg(dev, state, "class ");
+ error = dev->class->suspend(dev, state);
+ suspend_report_result(dev->class->suspend, error);
+ }
+
+ if (!error && dev->type && dev->type->suspend) {
+ suspend_device_dbg(dev, state, "type ");
+ error = dev->type->suspend(dev, state);
+ suspend_report_result(dev->type->suspend, error);
+ }
+
+ if (!error && dev->bus && dev->bus->suspend) {
+ suspend_device_dbg(dev, state, "");
+ error = dev->bus->suspend(dev, state);
+ suspend_report_result(dev->bus->suspend, error);
+ }
+ up(&dev->sem);
+ return error;
+}
+
+
+/*
+ * This is called with interrupts off, only a single CPU
+ * running. We can't acquire a mutex or semaphore (and we don't
+ * need the protection)
+ */
+static int suspend_device_late(struct device *dev, pm_message_t state)
+{
+ int error = 0;
+
+ if (dev->bus && dev->bus->suspend_late) {
+ suspend_device_dbg(dev, state, "LATE ");
+ error = dev->bus->suspend_late(dev, state);
+ suspend_report_result(dev->bus->suspend_late, error);
+ }
+ return error;
+}
+
+/**
+ * device_suspend - Save state and stop all devices in system.
+ * @state: Power state to put each device in.
+ *
+ * Walk the dpm_active list, call ->suspend() for each device, and move
+ * it to the dpm_off list.
+ *
+ * (For historical reasons, if it returns -EAGAIN, that used to mean
+ * that the device would be called again with interrupts disabled.
+ * These days, we use the "suspend_late()" callback for that, so we
+ * print a warning and consider it an error).
+ *
+ * If we get a different error, try and back out.
+ *
+ * If we hit a failure with any of the devices, call device_resume()
+ * above to bring the suspended devices back to life.
+ *
+ */
+
+int device_suspend(pm_message_t state)
+{
+ int error = 0;
+
+ might_sleep();
+ mutex_lock(&dpm_mtx);
+ mutex_lock(&dpm_list_mtx);
+ while (!list_empty(&dpm_active) && error == 0) {
+ struct list_head * entry = dpm_active.prev;
+ struct device * dev = to_device(entry);
+
+ get_device(dev);
+ mutex_unlock(&dpm_list_mtx);
+
+ error = suspend_device(dev, state);
+
+ mutex_lock(&dpm_list_mtx);
+
+ /* Check if the device got removed */
+ if (!list_empty(&dev->power.entry)) {
+ /* Move it to the dpm_off list */
+ if (!error)
+ list_move(&dev->power.entry, &dpm_off);
+ }
+ if (error)
+ printk(KERN_ERR "Could not suspend device %s: "
+ "error %d%s\n",
+ kobject_name(&dev->kobj), error,
+ error == -EAGAIN ? " (please convert to suspend_late)" : "");
+ put_device(dev);
+ }
+ mutex_unlock(&dpm_list_mtx);
+ if (error)
+ dpm_resume();
+
+ mutex_unlock(&dpm_mtx);
+ return error;
+}
+
+EXPORT_SYMBOL_GPL(device_suspend);
+
+/**
+ * device_power_down - Shut down special devices.
+ * @state: Power state to enter.
+ *
+ * Walk the dpm_off_irq list, calling ->power_down() for each device that
+ * couldn't power down the device with interrupts enabled. When we're
+ * done, power down system devices.
+ */
+
+int device_power_down(pm_message_t state)
+{
+ int error = 0;
+ struct device * dev;
+
+ while (!list_empty(&dpm_off)) {
+ struct list_head * entry = dpm_off.prev;
+
+ dev = to_device(entry);
+ error = suspend_device_late(dev, state);
+ if (error)
+ goto Error;
+ list_move(&dev->power.entry, &dpm_off_irq);
+ }
+
+ error = sysdev_suspend(state);
+ Done:
+ return error;
+ Error:
+ printk(KERN_ERR "Could not power down device %s: "
+ "error %d\n", kobject_name(&dev->kobj), error);
+ dpm_power_up();
+ goto Done;
+}
+
+EXPORT_SYMBOL_GPL(device_power_down);
+
+void __suspend_report_result(const char *function, void *fn, int ret)
+{
+ if (ret) {
+ printk(KERN_ERR "%s(): ", function);
+ print_fn_descriptor_symbol("%s() returns ", (unsigned long)fn);
+ printk("%d\n", ret);
+ }
+}
+EXPORT_SYMBOL_GPL(__suspend_report_result);
* main.c
*/
-/*
- * Used to synchronize global power management operations.
- */
-extern struct mutex dpm_mtx;
-
-/*
- * Used to serialize changes to the dpm_* lists.
- */
-extern struct mutex dpm_list_mtx;
-
-/*
- * The PM lists.
- */
-extern struct list_head dpm_active;
-extern struct list_head dpm_off;
-extern struct list_head dpm_off_irq;
-
-
-static inline struct dev_pm_info * to_pm_info(struct list_head * entry)
-{
- return container_of(entry, struct dev_pm_info, entry);
-}
+extern struct list_head dpm_active; /* The active device list */
static inline struct device * to_device(struct list_head * entry)
{
- return container_of(to_pm_info(entry), struct device, power);
+ return container_of(entry, struct device, power.entry);
}
extern int device_pm_add(struct device *);
extern int dpm_sysfs_add(struct device *);
extern void dpm_sysfs_remove(struct device *);
-/*
- * resume.c
- */
-
-extern void dpm_resume(void);
-extern void dpm_power_up(void);
-
#else /* CONFIG_PM_SLEEP */
+++ /dev/null
-/*
- * resume.c - Functions for waking devices up.
- *
- * Copyright (c) 2003 Patrick Mochel
- * Copyright (c) 2003 Open Source Development Labs
- *
- * This file is released under the GPLv2
- *
- */
-
-#include <linux/device.h>
-#include <linux/resume-trace.h>
-#include "../base.h"
-#include "power.h"
-
-
-/**
- * resume_device - Restore state for one device.
- * @dev: Device.
- *
- */
-
-static int resume_device(struct device * dev)
-{
- int error = 0;
-
- TRACE_DEVICE(dev);
- TRACE_RESUME(0);
-
- down(&dev->sem);
-
- if (dev->bus && dev->bus->resume) {
- dev_dbg(dev,"resuming\n");
- error = dev->bus->resume(dev);
- }
-
- if (!error && dev->type && dev->type->resume) {
- dev_dbg(dev,"resuming\n");
- error = dev->type->resume(dev);
- }
-
- if (!error && dev->class && dev->class->resume) {
- dev_dbg(dev,"class resume\n");
- error = dev->class->resume(dev);
- }
-
- up(&dev->sem);
-
- TRACE_RESUME(error);
- return error;
-}
-
-
-static int resume_device_early(struct device * dev)
-{
- int error = 0;
-
- TRACE_DEVICE(dev);
- TRACE_RESUME(0);
- if (dev->bus && dev->bus->resume_early) {
- dev_dbg(dev,"EARLY resume\n");
- error = dev->bus->resume_early(dev);
- }
- TRACE_RESUME(error);
- return error;
-}
-
-/*
- * Resume the devices that have either not gone through
- * the late suspend, or that did go through it but also
- * went through the early resume
- */
-void dpm_resume(void)
-{
- mutex_lock(&dpm_list_mtx);
- while(!list_empty(&dpm_off)) {
- struct list_head * entry = dpm_off.next;
- struct device * dev = to_device(entry);
-
- get_device(dev);
- list_move_tail(entry, &dpm_active);
-
- mutex_unlock(&dpm_list_mtx);
- resume_device(dev);
- mutex_lock(&dpm_list_mtx);
- put_device(dev);
- }
- mutex_unlock(&dpm_list_mtx);
-}
-
-
-/**
- * device_resume - Restore state of each device in system.
- *
- * Walk the dpm_off list, remove each entry, resume the device,
- * then add it to the dpm_active list.
- */
-
-void device_resume(void)
-{
- might_sleep();
- mutex_lock(&dpm_mtx);
- dpm_resume();
- mutex_unlock(&dpm_mtx);
-}
-
-EXPORT_SYMBOL_GPL(device_resume);
-
-
-/**
- * dpm_power_up - Power on some devices.
- *
- * Walk the dpm_off_irq list and power each device up. This
- * is used for devices that required they be powered down with
- * interrupts disabled. As devices are powered on, they are moved
- * to the dpm_active list.
- *
- * Interrupts must be disabled when calling this.
- */
-
-void dpm_power_up(void)
-{
- while(!list_empty(&dpm_off_irq)) {
- struct list_head * entry = dpm_off_irq.next;
- struct device * dev = to_device(entry);
-
- list_move_tail(entry, &dpm_off);
- resume_device_early(dev);
- }
-}
-
-
-/**
- * device_power_up - Turn on all devices that need special attention.
- *
- * Power on system devices then devices that required we shut them down
- * with interrupts disabled.
- * Called with interrupts disabled.
- */
-
-void device_power_up(void)
-{
- sysdev_resume();
- dpm_power_up();
-}
-
-EXPORT_SYMBOL_GPL(device_power_up);
-
-
+++ /dev/null
-/*
- * suspend.c - Functions for putting devices to sleep.
- *
- * Copyright (c) 2003 Patrick Mochel
- * Copyright (c) 2003 Open Source Development Labs
- *
- * This file is released under the GPLv2
- *
- */
-
-#include <linux/device.h>
-#include <linux/kallsyms.h>
-#include <linux/pm.h>
-#include "../base.h"
-#include "power.h"
-
-/*
- * The entries in the dpm_active list are in a depth first order, simply
- * because children are guaranteed to be discovered after parents, and
- * are inserted at the back of the list on discovery.
- *
- * All list on the suspend path are done in reverse order, so we operate
- * on the leaves of the device tree (or forests, depending on how you want
- * to look at it ;) first. As nodes are removed from the back of the list,
- * they are inserted into the front of their destintation lists.
- *
- * Things are the reverse on the resume path - iterations are done in
- * forward order, and nodes are inserted at the back of their destination
- * lists. This way, the ancestors will be accessed before their descendents.
- */
-
-static inline char *suspend_verb(u32 event)
-{
- switch (event) {
- case PM_EVENT_SUSPEND: return "suspend";
- case PM_EVENT_FREEZE: return "freeze";
- case PM_EVENT_PRETHAW: return "prethaw";
- default: return "(unknown suspend event)";
- }
-}
-
-
-static void
-suspend_device_dbg(struct device *dev, pm_message_t state, char *info)
-{
- dev_dbg(dev, "%s%s%s\n", info, suspend_verb(state.event),
- ((state.event == PM_EVENT_SUSPEND) && device_may_wakeup(dev)) ?
- ", may wakeup" : "");
-}
-
-/**
- * suspend_device - Save state of one device.
- * @dev: Device.
- * @state: Power state device is entering.
- */
-
-static int suspend_device(struct device * dev, pm_message_t state)
-{
- int error = 0;
-
- down(&dev->sem);
- if (dev->power.power_state.event) {
- dev_dbg(dev, "PM: suspend %d-->%d\n",
- dev->power.power_state.event, state.event);
- }
-
- if (dev->class && dev->class->suspend) {
- suspend_device_dbg(dev, state, "class ");
- error = dev->class->suspend(dev, state);
- suspend_report_result(dev->class->suspend, error);
- }
-
- if (!error && dev->type && dev->type->suspend) {
- suspend_device_dbg(dev, state, "type ");
- error = dev->type->suspend(dev, state);
- suspend_report_result(dev->type->suspend, error);
- }
-
- if (!error && dev->bus && dev->bus->suspend) {
- suspend_device_dbg(dev, state, "");
- error = dev->bus->suspend(dev, state);
- suspend_report_result(dev->bus->suspend, error);
- }
- up(&dev->sem);
- return error;
-}
-
-
-/*
- * This is called with interrupts off, only a single CPU
- * running. We can't acquire a mutex or semaphore (and we don't
- * need the protection)
- */
-static int suspend_device_late(struct device *dev, pm_message_t state)
-{
- int error = 0;
-
- if (dev->bus && dev->bus->suspend_late) {
- suspend_device_dbg(dev, state, "LATE ");
- error = dev->bus->suspend_late(dev, state);
- suspend_report_result(dev->bus->suspend_late, error);
- }
- return error;
-}
-
-/**
- * device_suspend - Save state and stop all devices in system.
- * @state: Power state to put each device in.
- *
- * Walk the dpm_active list, call ->suspend() for each device, and move
- * it to the dpm_off list.
- *
- * (For historical reasons, if it returns -EAGAIN, that used to mean
- * that the device would be called again with interrupts disabled.
- * These days, we use the "suspend_late()" callback for that, so we
- * print a warning and consider it an error).
- *
- * If we get a different error, try and back out.
- *
- * If we hit a failure with any of the devices, call device_resume()
- * above to bring the suspended devices back to life.
- *
- */
-
-int device_suspend(pm_message_t state)
-{
- int error = 0;
-
- might_sleep();
- mutex_lock(&dpm_mtx);
- mutex_lock(&dpm_list_mtx);
- while (!list_empty(&dpm_active) && error == 0) {
- struct list_head * entry = dpm_active.prev;
- struct device * dev = to_device(entry);
-
- get_device(dev);
- mutex_unlock(&dpm_list_mtx);
-
- error = suspend_device(dev, state);
-
- mutex_lock(&dpm_list_mtx);
-
- /* Check if the device got removed */
- if (!list_empty(&dev->power.entry)) {
- /* Move it to the dpm_off list */
- if (!error)
- list_move(&dev->power.entry, &dpm_off);
- }
- if (error)
- printk(KERN_ERR "Could not suspend device %s: "
- "error %d%s\n",
- kobject_name(&dev->kobj), error,
- error == -EAGAIN ? " (please convert to suspend_late)" : "");
- put_device(dev);
- }
- mutex_unlock(&dpm_list_mtx);
- if (error)
- dpm_resume();
-
- mutex_unlock(&dpm_mtx);
- return error;
-}
-
-EXPORT_SYMBOL_GPL(device_suspend);
-
-/**
- * device_power_down - Shut down special devices.
- * @state: Power state to enter.
- *
- * Walk the dpm_off_irq list, calling ->power_down() for each device that
- * couldn't power down the device with interrupts enabled. When we're
- * done, power down system devices.
- */
-
-int device_power_down(pm_message_t state)
-{
- int error = 0;
- struct device * dev;
-
- while (!list_empty(&dpm_off)) {
- struct list_head * entry = dpm_off.prev;
-
- dev = to_device(entry);
- error = suspend_device_late(dev, state);
- if (error)
- goto Error;
- list_move(&dev->power.entry, &dpm_off_irq);
- }
-
- error = sysdev_suspend(state);
- Done:
- return error;
- Error:
- printk(KERN_ERR "Could not power down device %s: "
- "error %d\n", kobject_name(&dev->kobj), error);
- dpm_power_up();
- goto Done;
-}
-
-EXPORT_SYMBOL_GPL(device_power_down);
-
-void __suspend_report_result(const char *function, void *fn, int ret)
-{
- if (ret) {
- printk(KERN_ERR "%s(): ", function);
- print_fn_descriptor_symbol("%s() returns ", (unsigned long)fn);
- printk("%d\n", ret);
- }
-}
-EXPORT_SYMBOL_GPL(__suspend_report_result);
projects / linux-2.6 / commitdiff