Bump versions based on changes submitted during 2.6.21 merge window.
Signed-off-by: Jeff Garzik <jeff@garzik.org>
#include <linux/libata.h>
#define DRV_NAME "ahci"
-#define DRV_VERSION "2.0"
+#define DRV_VERSION "2.1"
enum {
#include <linux/libata.h>
#define DRV_NAME "ata_generic"
-#define DRV_VERSION "0.2.10"
+#define DRV_VERSION "0.2.11"
/*
* A generic parallel ATA driver using libata
#include <linux/libata.h>
#define DRV_NAME "ata_piix"
-#define DRV_VERSION "2.00ac7"
+#define DRV_VERSION "2.10"
enum {
PIIX_IOCFG = 0x54, /* IDE I/O configuration register */
#include "libata.h"
-#define DRV_VERSION "2.10" /* must be exactly four chars */
+#define DRV_VERSION "2.20" /* must be exactly four chars */
/* debounce timing parameters in msecs { interval, duration, timeout } */
#include <linux/dmi.h>
#define DRV_NAME "pata_ali"
-#define DRV_VERSION "0.7.2"
+#define DRV_VERSION "0.7.3"
/*
* Cable special cases
#include <linux/libata.h>
#define DRV_NAME "pata_amd"
-#define DRV_VERSION "0.2.7"
+#define DRV_VERSION "0.2.8"
/**
* timing_setup - shared timing computation and load
#include <linux/libata.h>
#define DRV_NAME "pata_cs5520"
-#define DRV_VERSION "0.6.3"
+#define DRV_VERSION "0.6.4"
struct pio_clocks
{
#include <linux/dmi.h>
#define DRV_NAME "pata_cs5530"
-#define DRV_VERSION "0.7.1"
+#define DRV_VERSION "0.7.2"
static void __iomem *cs5530_port_base(struct ata_port *ap)
{
#include <linux/libata.h>
#define DRV_NAME "pata_hpt366"
-#define DRV_VERSION "0.5.3"
+#define DRV_VERSION "0.6.0"
struct hpt_clock {
u8 xfer_speed;
#include <linux/libata.h>
#define DRV_NAME "pata_hpt37x"
-#define DRV_VERSION "0.5.2"
+#define DRV_VERSION "0.6.0"
struct hpt_clock {
u8 xfer_speed;
#include <linux/libata.h>
#define DRV_NAME "pata_isapnp"
-#define DRV_VERSION "0.1.5"
+#define DRV_VERSION "0.2.0"
static struct scsi_host_template isapnp_sht = {
.module = THIS_MODULE,
#define DRV_NAME "pata_it821x"
-#define DRV_VERSION "0.3.3"
+#define DRV_VERSION "0.3.4"
struct it821x_dev
{
#include <scsi/scsi_host.h>
#define DRV_NAME "pata_ixp4xx_cf"
-#define DRV_VERSION "0.1.1ac3"
+#define DRV_VERSION "0.1.2"
static int ixp4xx_set_mode(struct ata_port *ap, struct ata_device **error)
{
#include <linux/platform_device.h>
#define DRV_NAME "pata_legacy"
-#define DRV_VERSION "0.5.3"
+#define DRV_VERSION "0.5.4"
#define NR_HOST 6
#include <linux/libata.h>
#define DRV_NAME "pata_opti"
-#define DRV_VERSION "0.2.7"
+#define DRV_VERSION "0.2.8"
enum {
READ_REG = 0, /* index of Read cycle timing register */
#include <linux/libata.h>
#define DRV_NAME "pata_optidma"
-#define DRV_VERSION "0.2.3"
+#define DRV_VERSION "0.2.4"
enum {
READ_REG = 0, /* index of Read cycle timing register */
#define DRV_NAME "pata_pcmcia"
-#define DRV_VERSION "0.2.11"
+#define DRV_VERSION "0.3.0"
/*
* Private data structure to glue stuff together
#include <linux/libata.h>
#define DRV_NAME "pata_pdc2027x"
-#define DRV_VERSION "0.74-ac5"
+#define DRV_VERSION "0.8"
#undef PDC_DEBUG
#ifdef PDC_DEBUG
#include <linux/libata.h>
#define DRV_NAME "pata_pdc202xx_old"
-#define DRV_VERSION "0.2.3"
+#define DRV_VERSION "0.3.0"
/**
* pdc2024x_pre_reset - probe begin
#include <linux/platform_device.h>
#define DRV_NAME "pata_qdi"
-#define DRV_VERSION "0.2.4"
+#define DRV_VERSION "0.3.0"
#define NR_HOST 4 /* Two 6580s */
#include <linux/libata.h>
#define DRV_NAME "pata_serverworks"
-#define DRV_VERSION "0.3.9"
+#define DRV_VERSION "0.4.0"
#define SVWKS_CSB5_REVISION_NEW 0x92 /* min PCI_REVISION_ID for UDMA5 (A2.0) */
#define SVWKS_CSB6_REVISION 0xa0 /* min PCI_REVISION_ID for UDMA4 (A1.0) */
#include "sis.h"
#define DRV_NAME "pata_sis"
-#define DRV_VERSION "0.4.5"
+#define DRV_VERSION "0.5.0"
struct sis_chipset {
u16 device; /* PCI host ID */
#include <linux/libata.h>
#define DRV_NAME "pata_sl82c105"
-#define DRV_VERSION "0.2.5"
+#define DRV_VERSION "0.3.0"
enum {
/*
#include <linux/platform_device.h>
#define DRV_NAME "pata_winbond"
-#define DRV_VERSION "0.0.1"
+#define DRV_VERSION "0.0.2"
#define NR_HOST 4 /* Two winbond controllers, two channels each */
#include <linux/libata.h>
#define DRV_NAME "pdc_adma"
-#define DRV_VERSION "0.04"
+#define DRV_VERSION "0.05"
/* macro to calculate base address for ATA regs */
#define ADMA_ATA_REGS(base,port_no) ((base) + ((port_no) * 0x40))
#include <linux/libata.h>
#define DRV_NAME "sata_mv"
-#define DRV_VERSION "0.7"
+#define DRV_VERSION "0.8"
enum {
/* BAR's are enumerated in terms of pci_resource_start() terms */
#include "sata_promise.h"
#define DRV_NAME "sata_promise"
-#define DRV_VERSION "1.05"
+#define DRV_VERSION "2.00"
enum {
#include <linux/libata.h>
#define DRV_NAME "sata_qstor"
-#define DRV_VERSION "0.06"
+#define DRV_VERSION "0.07"
enum {
QS_MMIO_BAR = 4,
#include <linux/libata.h>
#define DRV_NAME "sata_sil"
-#define DRV_VERSION "2.0"
+#define DRV_VERSION "2.1"
enum {
SIL_MMIO_BAR = 5,
#include <linux/libata.h>
#define DRV_NAME "sata_sil24"
-#define DRV_VERSION "0.3"
+#define DRV_VERSION "0.8"
/*
* Port request block (PRB) 32 bytes
#endif /* CONFIG_PPC_OF */
#define DRV_NAME "sata_svw"
-#define DRV_VERSION "2.0"
+#define DRV_VERSION "2.1"
enum {
K2_FLAG_NO_ATAPI_DMA = (1 << 29),
#include "sata_promise.h"
#define DRV_NAME "sata_sx4"
-#define DRV_VERSION "0.9"
+#define DRV_VERSION "0.10"
enum {
#include <linux/libata.h>
#define DRV_NAME "sata_uli"
-#define DRV_VERSION "1.0"
+#define DRV_VERSION "1.1"
enum {
uli_5289 = 0,
#include <linux/libata.h>
#define DRV_NAME "sata_via"
-#define DRV_VERSION "2.0"
+#define DRV_VERSION "2.1"
enum board_ids_enum {
vt6420,
#include <linux/libata.h>
#define DRV_NAME "sata_vsc"
-#define DRV_VERSION "2.0"
+#define DRV_VERSION "2.1"
enum {
VSC_MMIO_BAR = 0,