#define FIFO_RWM 0x18000000 /* FIFO Regular Watermarks */
#define FIFO_UWM 0x60000000 /* FIFO Urgent Watermarks */
+#define DLEN_8 (0 << 15) /* 000 - 8 bits */
+#define DLEN_10 (1 << 15) /* 001 - 10 bits */
+#define DLEN_12 (2 << 15) /* 010 - 12 bits */
+#define DLEN_14 (3 << 15) /* 011 - 14 bits */
+#define DLEN_16 (4 << 15) /* 100 - 16 bits */
+#define DLEN_18 (5 << 15) /* 101 - 18 bits */
+#define DLEN_24 (6 << 15) /* 110 - 24 bits */
+
+
/* Bit masks for EPPIx_FS2W_LVB */
#define F1VB_BD 0xff /* Vertical Blanking before Field 1 Active Data */
/* BCODE bit field options (SYSCFG register) */
#define BCODE_WAKEUP 0x0000 /* boot according to wake-up condition */
-#define BCODE_FULLBOOT 0x0010 /* always perform full boot */
+#define BCODE_FULLBOOT 0x0010 /* always perform full boot */
#define BCODE_QUICKBOOT 0x0020 /* always perform quick boot */
#define BCODE_NOBOOT 0x0030 /* always perform full boot */
/* CNT_COMMAND bit field options */
-
+
#define W1LCNT_ZERO 0x0001 /* write 1 to load CNT_COUNTER with zero */
#define W1LCNT_MIN 0x0004 /* write 1 to load CNT_COUNTER from CNT_MIN */
#define W1LCNT_MAX 0x0008 /* write 1 to load CNT_COUNTER from CNT_MAX */
-
+
#define W1LMIN_ZERO 0x0010 /* write 1 to load CNT_MIN with zero */
#define W1LMIN_CNT 0x0020 /* write 1 to load CNT_MIN from CNT_COUNTER */
#define W1LMIN_MAX 0x0080 /* write 1 to load CNT_MIN from CNT_MAX */
-
+
#define W1LMAX_ZERO 0x0100 /* write 1 to load CNT_MAX with zero */
#define W1LMAX_CNT 0x0200 /* write 1 to load CNT_MAX from CNT_COUNTER */
#define W1LMAX_MIN 0x0400 /* write 1 to load CNT_MAX from CNT_MIN */
-
+
/* CNT_CONFIG bit field options */
-
+
#define CNTMODE_QUADENC 0x0000 /* quadrature encoder mode */
#define CNTMODE_BINENC 0x0100 /* binary encoder mode */
#define CNTMODE_UDCNT 0x0200 /* up/down counter mode */
#define CNTMODE_DIRCNT 0x0400 /* direction counter mode */
#define CNTMODE_DIRTMR 0x0500 /* direction timer mode */
-
+
#define BNDMODE_COMP 0x0000 /* boundary compare mode */
#define BNDMODE_ZERO 0x1000 /* boundary compare and zero mode */
#define BNDMODE_CAPT 0x2000 /* boundary capture mode */
#define EXT_CLK 0x0003
/* UARTx_LCR bit field options */
-
+
#define WLS_5 0x0000 /* 5 data bits */
#define WLS_6 0x0001 /* 6 data bits */
#define WLS_7 0x0002 /* 7 data bits */
#define PIQ30 0x40000000
#define PIQ31 0x80000000
-/* PORT A Bit Definitions for the registers
+/* PORT A Bit Definitions for the registers
PORTA, PORTA_SET, PORTA_CLEAR,
PORTA_DIR_SET, PORTA_DIR_CLEAR, PORTA_INEN,
PORTA_FER registers
#define PA14 0x4000
#define PA15 0x8000
-/* PORT B Bit Definitions for the registers
+/* PORT B Bit Definitions for the registers
PORTB, PORTB_SET, PORTB_CLEAR,
PORTB_DIR_SET, PORTB_DIR_CLEAR, PORTB_INEN,
PORTB_FER registers
#define PB14 0x4000
-/* PORT C Bit Definitions for the registers
+/* PORT C Bit Definitions for the registers
PORTC, PORTC_SET, PORTC_CLEAR,
PORTC_DIR_SET, PORTC_DIR_CLEAR, PORTC_INEN,
PORTC_FER registers
#define PC13 0x2000
-/* PORT D Bit Definitions for the registers
+/* PORT D Bit Definitions for the registers
PORTD, PORTD_SET, PORTD_CLEAR,
PORTD_DIR_SET, PORTD_DIR_CLEAR, PORTD_INEN,
PORTD_FER registers
#define PD14 0x4000
#define PD15 0x8000
-/* PORT E Bit Definitions for the registers
+/* PORT E Bit Definitions for the registers
PORTE, PORTE_SET, PORTE_CLEAR,
PORTE_DIR_SET, PORTE_DIR_CLEAR, PORTE_INEN,
PORTE_FER registers
#define PE14 0x4000
#define PE15 0x8000
-/* PORT F Bit Definitions for the registers
+/* PORT F Bit Definitions for the registers
PORTF, PORTF_SET, PORTF_CLEAR,
PORTF_DIR_SET, PORTF_DIR_CLEAR, PORTF_INEN,
PORTF_FER registers
#define PF14 0x4000
#define PF15 0x8000
-/* PORT G Bit Definitions for the registers
+/* PORT G Bit Definitions for the registers
PORTG, PORTG_SET, PORTG_CLEAR,
PORTG_DIR_SET, PORTG_DIR_CLEAR, PORTG_INEN,
PORTG_FER registers
#define PG14 0x4000
#define PG15 0x8000
-/* PORT H Bit Definitions for the registers
+/* PORT H Bit Definitions for the registers
PORTH, PORTH_SET, PORTH_CLEAR,
PORTH_DIR_SET, PORTH_DIR_CLEAR, PORTH_INEN,
PORTH_FER registers
#define PH13 0x2000
-/* PORT I Bit Definitions for the registers
+/* PORT I Bit Definitions for the registers
PORTI, PORTI_SET, PORTI_CLEAR,
PORTI_DIR_SET, PORTI_DIR_CLEAR, PORTI_INEN,
PORTI_FER registers
#define PI14 0x4000
#define PI15 0x8000
-/* PORT J Bit Definitions for the registers
+/* PORT J Bit Definitions for the registers
PORTJ, PORTJ_SET, PORTJ_CLEAR,
PORTJ_DIR_SET, PORTJ_DIR_CLEAR, PORTJ_INEN,
PORTJ_FER registers
#define PJ11 0x0800
#define PJ12 0x1000
#define PJ13 0x2000
-
+
/* Port Muxing Bit Fields for PORTx_MUX Registers */
#define B0MAP_PIL 0x00000006 /* Map Port I Low to Byte 0 */
#define B0MAP_PJL 0x00000007 /* Map Port J Low to Byte 0 */
-#define B1MAP_PCH 0x00000000 /* Map Port C High to Byte 1 */
+#define B1MAP_PCH 0x00000000 /* Map Port C High to Byte 1 */
#define B1MAP_PDH 0x00000100 /* Map Port D High to Byte 1 */
#define B1MAP_PEH 0x00000200 /* Map Port E High to Byte 1 */
#define B1MAP_PFH 0x00000300 /* Map Port F High to Byte 1 */
#define B1MAP_PIH 0x00000600 /* Map Port I High to Byte 1 */
#define B1MAP_PJH 0x00000700 /* Map Port J High to Byte 1 */
-#define B2MAP_PCL 0x00000000 /* Map Port C Low to Byte 2 */
-#define B2MAP_PDL 0x00010000 /* Map Port D Low to Byte 2 */
-#define B2MAP_PEL 0x00020000 /* Map Port E Low to Byte 2 */
-#define B2MAP_PFL 0x00030000 /* Map Port F Low to Byte 2 */
-#define B2MAP_PGL 0x00040000 /* Map Port G Low to Byte 2 */
-#define B2MAP_PHL 0x00050000 /* Map Port H Low to Byte 2 */
-#define B2MAP_PIL 0x00060000 /* Map Port I Low to Byte 2 */
-#define B2MAP_PJL 0x00070000 /* Map Port J Low to Byte 2 */
-
-#define B3MAP_PCH 0x00000000 /* Map Port C High to Byte 3 */
-#define B3MAP_PDH 0x01000000 /* Map Port D High to Byte 3 */
-#define B3MAP_PEH 0x02000000 /* Map Port E High to Byte 3 */
-#define B3MAP_PFH 0x03000000 /* Map Port F High to Byte 3 */
-#define B3MAP_PGH 0x04000000 /* Map Port G High to Byte 3 */
-#define B3MAP_PHH 0x05000000 /* Map Port H High to Byte 3 */
-#define B3MAP_PIH 0x06000000 /* Map Port I High to Byte 3 */
-#define B3MAP_PJH 0x07000000 /* Map Port J High to Byte 3 */
+#define B2MAP_PCL 0x00000000 /* Map Port C Low to Byte 2 */
+#define B2MAP_PDL 0x00010000 /* Map Port D Low to Byte 2 */
+#define B2MAP_PEL 0x00020000 /* Map Port E Low to Byte 2 */
+#define B2MAP_PFL 0x00030000 /* Map Port F Low to Byte 2 */
+#define B2MAP_PGL 0x00040000 /* Map Port G Low to Byte 2 */
+#define B2MAP_PHL 0x00050000 /* Map Port H Low to Byte 2 */
+#define B2MAP_PIL 0x00060000 /* Map Port I Low to Byte 2 */
+#define B2MAP_PJL 0x00070000 /* Map Port J Low to Byte 2 */
+
+#define B3MAP_PCH 0x00000000 /* Map Port C High to Byte 3 */
+#define B3MAP_PDH 0x01000000 /* Map Port D High to Byte 3 */
+#define B3MAP_PEH 0x02000000 /* Map Port E High to Byte 3 */
+#define B3MAP_PFH 0x03000000 /* Map Port F High to Byte 3 */
+#define B3MAP_PGH 0x04000000 /* Map Port G High to Byte 3 */
+#define B3MAP_PHH 0x05000000 /* Map Port H High to Byte 3 */
+#define B3MAP_PIH 0x06000000 /* Map Port I High to Byte 3 */
+#define B3MAP_PJH 0x07000000 /* Map Port J High to Byte 3 */
/* for legacy compatibility */
-
+
#define WLS(x) (((x)-5) & 0x03) /* Word Length Select */
#define W1LMAX_MAX W1LMAX_MIN
#define EBIU_AMCBCTL0 EBIU_AMBCTL0
projects / linux-2.6 / commitdiff