* common I/O routines
*/
-static void snd_cs4281_delay(unsigned int delay)
-{
- if (delay > 999) {
- unsigned long end_time;
- delay = (delay * HZ) / 1000000;
- if (delay < 1)
- delay = 1;
- end_time = jiffies + delay;
- do {
- schedule_timeout_uninterruptible(1);
- } while (time_after_eq(end_time, jiffies));
- } else {
- udelay(delay);
- }
-}
-
-static inline void snd_cs4281_delay_long(void)
-{
- schedule_timeout_uninterruptible(1);
-}
-
static inline void snd_cs4281_pokeBA0(cs4281_t *chip, unsigned long offset, unsigned int val)
{
writel(val, chip->ba0 + offset);
snd_cs4281_pokeBA0(chip, BA0_SPMC, 0);
udelay(50);
snd_cs4281_pokeBA0(chip, BA0_SPMC, BA0_SPMC_RSTN);
- snd_cs4281_delay(50000);
+ msleep(50);
if (chip->dual_codec)
snd_cs4281_pokeBA0(chip, BA0_SPMC, BA0_SPMC_RSTN | BA0_SPMC_ASDI2E);
* Start the DLL Clock logic.
*/
snd_cs4281_pokeBA0(chip, BA0_CLKCR1, BA0_CLKCR1_DLLP);
- snd_cs4281_delay(50000);
+ msleep(50);
snd_cs4281_pokeBA0(chip, BA0_CLKCR1, BA0_CLKCR1_SWCE | BA0_CLKCR1_DLLP);
/*
* Wait for the DLL ready signal from the clock logic.
*/
- timeout = HZ;
+ timeout = 100;
do {
/*
* Read the AC97 status register to see if we've seen a CODEC
*/
if (snd_cs4281_peekBA0(chip, BA0_CLKCR1) & BA0_CLKCR1_DLLRDY)
goto __ok0;
- snd_cs4281_delay_long();
+ msleep(1);
} while (timeout-- > 0);
snd_printk(KERN_ERR "DLLRDY not seen\n");
/*
* Wait for the codec ready signal from the AC97 codec.
*/
- timeout = HZ;
+ timeout = 100;
do {
/*
* Read the AC97 status register to see if we've seen a CODEC
*/
if (snd_cs4281_peekBA0(chip, BA0_ACSTS) & BA0_ACSTS_CRDY)
goto __ok1;
- snd_cs4281_delay_long();
+ msleep(1);
} while (timeout-- > 0);
snd_printk(KERN_ERR "never read codec ready from AC'97 (0x%x)\n", snd_cs4281_peekBA0(chip, BA0_ACSTS));
__ok1:
if (chip->dual_codec) {
- timeout = HZ;
+ timeout = 100;
do {
if (snd_cs4281_peekBA0(chip, BA0_ACSTS2) & BA0_ACSTS_CRDY)
goto __codec2_ok;
- snd_cs4281_delay_long();
+ msleep(1);
} while (timeout-- > 0);
snd_printk(KERN_INFO "secondary codec doesn't respond. disable it...\n");
chip->dual_codec = 0;
* the codec is pumping ADC data across the AC-link.
*/
- timeout = HZ;
+ timeout = 100;
do {
/*
* Read the input slot valid register and see if input slots 3
*/
if ((snd_cs4281_peekBA0(chip, BA0_ACISV) & (BA0_ACISV_SLV(3) | BA0_ACISV_SLV(4))) == (BA0_ACISV_SLV(3) | BA0_ACISV_SLV(4)))
goto __ok2;
- snd_cs4281_delay_long();
+ msleep(1);
} while (timeout-- > 0);
if (--retry_count > 0)