* 2 of the License, or (at your option) any later version.
*/
+#include <linux/types.h>
+#include <linux/device.h>
#include <linux/init.h>
#include <linux/console.h>
#include <linux/module.h>
#include <linux/mm.h>
#include <linux/dma-mapping.h>
+#include <linux/kobject.h>
+
#include <asm/iommu.h>
#include <asm/dma.h>
#include <asm/vio.h>
#include <asm/prom.h>
#include <asm/firmware.h>
-
-struct vio_dev vio_bus_device = { /* fake "parent" device */
+#include <asm/tce.h>
+#include <asm/abs_addr.h>
+#include <asm/page.h>
+#include <asm/hvcall.h>
+#include <asm/iseries/vio.h>
+#include <asm/iseries/hv_types.h>
+#include <asm/iseries/hv_lp_config.h>
+#include <asm/iseries/hv_call_xm.h>
+#include <asm/iseries/iommu.h>
+
+extern struct subsystem devices_subsys; /* needed for vio_find_name() */
+
+static struct vio_dev vio_bus_device = { /* fake "parent" device */
.name = vio_bus_device.dev.bus_id,
.type = "",
.dev.bus_id = "vio",
.dev.bus = &vio_bus_type,
};
-static struct vio_bus_ops vio_bus_ops;
+#ifdef CONFIG_PPC_ISERIES
+struct device *iSeries_vio_dev = &vio_bus_device.dev;
+EXPORT_SYMBOL(iSeries_vio_dev);
+
+static struct iommu_table veth_iommu_table;
+static struct iommu_table vio_iommu_table;
+
+static void __init iommu_vio_init(void)
+{
+ iommu_table_getparms_iSeries(255, 0, 0xff, &veth_iommu_table);
+ veth_iommu_table.it_size /= 2;
+ vio_iommu_table = veth_iommu_table;
+ vio_iommu_table.it_offset += veth_iommu_table.it_size;
+
+ if (!iommu_init_table(&veth_iommu_table))
+ printk("Virtual Bus VETH TCE table failed.\n");
+ if (!iommu_init_table(&vio_iommu_table))
+ printk("Virtual Bus VIO TCE table failed.\n");
+}
+#endif
+
+static struct iommu_table *vio_build_iommu_table(struct vio_dev *dev)
+{
+#ifdef CONFIG_PPC_ISERIES
+ if (firmware_has_feature(FW_FEATURE_ISERIES)) {
+ if (strcmp(dev->type, "vlan") == 0)
+ return &veth_iommu_table;
+ return &vio_iommu_table;
+ } else
+#endif
+ {
+ unsigned int *dma_window;
+ struct iommu_table *newTceTable;
+ unsigned long offset;
+ int dma_window_property_size;
+
+ dma_window = (unsigned int *)get_property(
+ dev->dev.platform_data, "ibm,my-dma-window",
+ &dma_window_property_size);
+ if (!dma_window)
+ return NULL;
+
+ newTceTable = kmalloc(sizeof(struct iommu_table), GFP_KERNEL);
+
+ /*
+ * There should be some code to extract the phys-encoded
+ * offset using prom_n_addr_cells(). However, according to
+ * a comment on earlier versions, it's always zero, so we
+ * don't bother
+ */
+ offset = dma_window[1] >> PAGE_SHIFT;
+
+ /* TCE table size - measured in tce entries */
+ newTceTable->it_size = dma_window[4] >> PAGE_SHIFT;
+ /* offset for VIO should always be 0 */
+ newTceTable->it_offset = offset;
+ newTceTable->it_busno = 0;
+ newTceTable->it_index = (unsigned long)dma_window[0];
+ newTceTable->it_type = TCE_VB;
+
+ return iommu_init_table(newTceTable);
+ }
+}
/**
* vio_match_device: - Tell if a VIO device has a matching
}
EXPORT_SYMBOL(vio_unregister_driver);
+/* vio_dev refcount hit 0 */
+static void __devinit vio_dev_release(struct device *dev)
+{
+ if (dev->platform_data) {
+ /* XXX free TCE table */
+ of_node_put(dev->platform_data);
+ }
+ kfree(to_vio_dev(dev));
+}
+
/**
* vio_register_device_node: - Register a new vio device.
* @of_node: The OF node for this device.
if (unit_address != NULL)
viodev->unit_address = *unit_address;
}
- viodev->iommu_table = vio_bus_ops.build_iommu_table(viodev);
+ viodev->iommu_table = vio_build_iommu_table(viodev);
+
+ /* init generic 'struct device' fields: */
+ viodev->dev.parent = &vio_bus_device.dev;
+ viodev->dev.bus = &vio_bus_type;
+ viodev->dev.release = vio_dev_release;
/* register with generic device framework */
- if (vio_register_device(viodev) == NULL) {
+ if (device_register(&viodev->dev)) {
+ printk(KERN_ERR "%s: failed to register device %s\n",
+ __FUNCTION__, viodev->dev.bus_id);
/* XXX free TCE table */
kfree(viodev);
return NULL;
/**
* vio_bus_init: - Initialize the virtual IO bus
*/
-int __init vio_bus_init(struct vio_bus_ops *ops)
+static int __init vio_bus_init(void)
{
int err;
struct device_node *node_vroot;
- vio_bus_ops = *ops;
+#ifdef CONFIG_PPC_ISERIES
+ if (firmware_has_feature(FW_FEATURE_ISERIES)) {
+ iommu_vio_init();
+ vio_bus_device.iommu_table = &vio_iommu_table;
+ iSeries_vio_dev = &vio_bus_device.dev;
+ }
+#endif
err = bus_register(&vio_bus_type);
if (err) {
return 0;
}
-
-/* vio_dev refcount hit 0 */
-static void __devinit vio_dev_release(struct device *dev)
-{
- if (dev->platform_data) {
- /* XXX free TCE table */
- of_node_put(dev->platform_data);
- }
- kfree(to_vio_dev(dev));
-}
+__initcall(vio_bus_init);
static ssize_t name_show(struct device *dev,
struct device_attribute *attr, char *buf)
__ATTR_NULL
};
-struct vio_dev * __devinit vio_register_device(struct vio_dev *viodev)
-{
- /* init generic 'struct device' fields: */
- viodev->dev.parent = &vio_bus_device.dev;
- viodev->dev.bus = &vio_bus_type;
- viodev->dev.release = vio_dev_release;
-
- /* register with generic device framework */
- if (device_register(&viodev->dev)) {
- printk(KERN_ERR "%s: failed to register device %s\n",
- __FUNCTION__, viodev->dev.bus_id);
- return NULL;
- }
-
- return viodev;
-}
-
void __devinit vio_unregister_device(struct vio_dev *viodev)
{
device_unregister(&viodev->dev);
return get_property(vdev->dev.platform_data, which, length);
}
EXPORT_SYMBOL(vio_get_attribute);
+
+#ifdef CONFIG_PPC_PSERIES
+/* vio_find_name() - internal because only vio.c knows how we formatted the
+ * kobject name
+ * XXX once vio_bus_type.devices is actually used as a kset in
+ * drivers/base/bus.c, this function should be removed in favor of
+ * "device_find(kobj_name, &vio_bus_type)"
+ */
+static struct vio_dev *vio_find_name(const char *kobj_name)
+{
+ struct kobject *found;
+
+ found = kset_find_obj(&devices_subsys.kset, kobj_name);
+ if (!found)
+ return NULL;
+
+ return to_vio_dev(container_of(found, struct device, kobj));
+}
+
+/**
+ * vio_find_node - find an already-registered vio_dev
+ * @vnode: device_node of the virtual device we're looking for
+ */
+struct vio_dev *vio_find_node(struct device_node *vnode)
+{
+ uint32_t *unit_address;
+ char kobj_name[BUS_ID_SIZE];
+
+ /* construct the kobject name from the device node */
+ unit_address = (uint32_t *)get_property(vnode, "reg", NULL);
+ if (!unit_address)
+ return NULL;
+ snprintf(kobj_name, BUS_ID_SIZE, "%x", *unit_address);
+
+ return vio_find_name(kobj_name);
+}
+EXPORT_SYMBOL(vio_find_node);
+
+int vio_enable_interrupts(struct vio_dev *dev)
+{
+ int rc = h_vio_signal(dev->unit_address, VIO_IRQ_ENABLE);
+ if (rc != H_SUCCESS)
+ printk(KERN_ERR "vio: Error 0x%x enabling interrupts\n", rc);
+ return rc;
+}
+EXPORT_SYMBOL(vio_enable_interrupts);
+
+int vio_disable_interrupts(struct vio_dev *dev)
+{
+ int rc = h_vio_signal(dev->unit_address, VIO_IRQ_DISABLE);
+ if (rc != H_SUCCESS)
+ printk(KERN_ERR "vio: Error 0x%x disabling interrupts\n", rc);
+ return rc;
+}
+EXPORT_SYMBOL(vio_disable_interrupts);
+#endif /* CONFIG_PPC_PSERIES */
+++ /dev/null
-/*
- * IBM PowerPC iSeries Virtual I/O Infrastructure Support.
- *
- * Copyright (c) 2005 Stephen Rothwell, IBM Corp.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#include <linux/types.h>
-#include <linux/device.h>
-#include <linux/init.h>
-
-#include <asm/vio.h>
-#include <asm/iommu.h>
-#include <asm/tce.h>
-#include <asm/abs_addr.h>
-#include <asm/page.h>
-#include <asm/iseries/vio.h>
-#include <asm/iseries/hv_types.h>
-#include <asm/iseries/hv_lp_config.h>
-#include <asm/iseries/hv_call_xm.h>
-
-#include "iommu.h"
-
-struct device *iSeries_vio_dev = &vio_bus_device.dev;
-EXPORT_SYMBOL(iSeries_vio_dev);
-
-static struct iommu_table veth_iommu_table;
-static struct iommu_table vio_iommu_table;
-
-static void __init iommu_vio_init(void)
-{
- iommu_table_getparms_iSeries(255, 0, 0xff, &veth_iommu_table);
- veth_iommu_table.it_size /= 2;
- vio_iommu_table = veth_iommu_table;
- vio_iommu_table.it_offset += veth_iommu_table.it_size;
-
- if (!iommu_init_table(&veth_iommu_table))
- printk("Virtual Bus VETH TCE table failed.\n");
- if (!iommu_init_table(&vio_iommu_table))
- printk("Virtual Bus VIO TCE table failed.\n");
-}
-
-static struct iommu_table *vio_build_iommu_table(struct vio_dev *dev)
-{
- if (strcmp(dev->type, "vlan") == 0)
- return &veth_iommu_table;
- return &vio_iommu_table;
-}
-
-static struct vio_bus_ops vio_bus_ops_iseries = {
- .build_iommu_table = vio_build_iommu_table,
-};
-
-/**
- * vio_bus_init_iseries: - Initialize the iSeries virtual IO bus
- */
-static int __init vio_bus_init_iseries(void)
-{
- iommu_vio_init();
- vio_bus_device.iommu_table = &vio_iommu_table;
- iSeries_vio_dev = &vio_bus_device.dev;
- return vio_bus_init(&vio_bus_ops_iseries);
-}
-__initcall(vio_bus_init_iseries);
+++ /dev/null
-/*
- * IBM PowerPC pSeries Virtual I/O Infrastructure Support.
- *
- * Copyright (c) 2003-2005 IBM Corp.
- * Dave Engebretsen engebret@us.ibm.com
- * Santiago Leon santil@us.ibm.com
- * Hollis Blanchard <hollisb@us.ibm.com>
- * Stephen Rothwell
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/mm.h>
-#include <linux/kobject.h>
-#include <asm/iommu.h>
-#include <asm/dma.h>
-#include <asm/prom.h>
-#include <asm/vio.h>
-#include <asm/hvcall.h>
-#include <asm/tce.h>
-
-extern struct subsystem devices_subsys; /* needed for vio_find_name() */
-
-/**
- * vio_build_iommu_table: - gets the dma information from OF and
- * builds the TCE tree.
- * @dev: the virtual device.
- *
- * Returns a pointer to the built tce tree, or NULL if it can't
- * find property.
-*/
-static struct iommu_table *vio_build_iommu_table(struct vio_dev *dev)
-{
- unsigned int *dma_window;
- struct iommu_table *newTceTable;
- unsigned long offset;
- int dma_window_property_size;
-
- dma_window = (unsigned int *) get_property(dev->dev.platform_data, "ibm,my-dma-window", &dma_window_property_size);
- if(!dma_window) {
- return NULL;
- }
-
- newTceTable = (struct iommu_table *) kmalloc(sizeof(struct iommu_table), GFP_KERNEL);
-
- /* There should be some code to extract the phys-encoded offset
- using prom_n_addr_cells(). However, according to a comment
- on earlier versions, it's always zero, so we don't bother */
- offset = dma_window[1] >> PAGE_SHIFT;
-
- /* TCE table size - measured in tce entries */
- newTceTable->it_size = dma_window[4] >> PAGE_SHIFT;
- /* offset for VIO should always be 0 */
- newTceTable->it_offset = offset;
- newTceTable->it_busno = 0;
- newTceTable->it_index = (unsigned long)dma_window[0];
- newTceTable->it_type = TCE_VB;
-
- return iommu_init_table(newTceTable);
-}
-
-static struct vio_bus_ops vio_bus_ops_pseries = {
- .build_iommu_table = vio_build_iommu_table,
-};
-
-/**
- * vio_bus_init_pseries: - Initialize the pSeries virtual IO bus
- */
-static int __init vio_bus_init_pseries(void)
-{
- return vio_bus_init(&vio_bus_ops_pseries);
-}
-
-__initcall(vio_bus_init_pseries);
-
-/* vio_find_name() - internal because only vio.c knows how we formatted the
- * kobject name
- * XXX once vio_bus_type.devices is actually used as a kset in
- * drivers/base/bus.c, this function should be removed in favor of
- * "device_find(kobj_name, &vio_bus_type)"
- */
-static struct vio_dev *vio_find_name(const char *kobj_name)
-{
- struct kobject *found;
-
- found = kset_find_obj(&devices_subsys.kset, kobj_name);
- if (!found)
- return NULL;
-
- return to_vio_dev(container_of(found, struct device, kobj));
-}
-
-/**
- * vio_find_node - find an already-registered vio_dev
- * @vnode: device_node of the virtual device we're looking for
- */
-struct vio_dev *vio_find_node(struct device_node *vnode)
-{
- uint32_t *unit_address;
- char kobj_name[BUS_ID_SIZE];
-
- /* construct the kobject name from the device node */
- unit_address = (uint32_t *)get_property(vnode, "reg", NULL);
- if (!unit_address)
- return NULL;
- snprintf(kobj_name, BUS_ID_SIZE, "%x", *unit_address);
-
- return vio_find_name(kobj_name);
-}
-EXPORT_SYMBOL(vio_find_node);
-
-int vio_enable_interrupts(struct vio_dev *dev)
-{
- int rc = h_vio_signal(dev->unit_address, VIO_IRQ_ENABLE);
- if (rc != H_SUCCESS)
- printk(KERN_ERR "vio: Error 0x%x enabling interrupts\n", rc);
- return rc;
-}
-EXPORT_SYMBOL(vio_enable_interrupts);
-
-int vio_disable_interrupts(struct vio_dev *dev)
-{
- int rc = h_vio_signal(dev->unit_address, VIO_IRQ_DISABLE);
- if (rc != H_SUCCESS)
- printk(KERN_ERR "vio: Error 0x%x disabling interrupts\n", rc);
- return rc;
-}
-EXPORT_SYMBOL(vio_disable_interrupts);
projects / linux-2.6 / commitdiff