]> err.no Git - linux-2.6/commitdiff
Blackfin arch: Dont use cs_change_per_word, since the AD7877 driver doesnt require...
authorMichael Hennerich <michael.hennerich@analog.com>
Thu, 15 Nov 2007 13:33:31 +0000 (21:33 +0800)
committerBryan Wu <bryan.wu@analog.com>
Thu, 15 Nov 2007 13:33:31 +0000 (21:33 +0800)
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
arch/blackfin/mach-bf527/boards/ezkit.c
arch/blackfin/mach-bf537/boards/generic_board.c
arch/blackfin/mach-bf537/boards/pnav10.c
arch/blackfin/mach-bf537/boards/stamp.c
arch/blackfin/mach-bf548/boards/ezkit.c

index c6614e52ad127cab9883cdc35ba8f0995ba20f75..003e2ac654d8629665c256e1683571b632517468 100644 (file)
@@ -451,7 +451,7 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = {
 };
 #endif
 
-#if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) \
+#if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \
         && defined(CONFIG_SND_SOC_WM8731_SPI)
 static struct bfin5xx_spi_chip spi_wm8731_chip_info = {
        .enable_dma = 0,
@@ -564,7 +564,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
                .controller_data = &spi_ad7877_chip_info,
        },
 #endif
-#if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) \
+#if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \
         && defined(CONFIG_SND_SOC_WM8731_SPI)
        {
                .modalias       = "wm8731",
index 0a1bdeb0ca94b5019bd017c67b7f810da01ea84b..09f4bfbd23506c4edb5313d28c7a8c22b4e61ed6 100644 (file)
@@ -503,7 +503,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
                .platform_data          = &bfin_ad7877_ts_info,
                .irq                    = IRQ_PF6,
                .max_speed_hz   = 12500000,     /* max spi clock (SCK) speed in HZ */
-               .bus_num        = 1,
+               .bus_num        = 0,
                .chip_select  = 1,
                .controller_data = &spi_ad7877_chip_info,
        },
index 5826c6279fb85580794c86c7fddc126375b279c2..fd5f4a6f08e48efbe5f4afc98c80b32752d74a2e 100644 (file)
@@ -296,7 +296,7 @@ static struct bfin5xx_spi_chip spi_mmc_chip_info = {
 
 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
 static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
-       .cs_change_per_word = 1,
+       .cs_change_per_word = 0,
        .enable_dma = 0,
        .bits_per_word = 16,
 };
@@ -388,7 +388,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
        .platform_data          = &bfin_ad7877_ts_info,
        .irq                    = IRQ_PF2,
        .max_speed_hz           = 12500000,     /* max spi clock (SCK) speed in HZ */
-       .bus_num                = 1,
+       .bus_num                = 0,
        .chip_select            = 5,
        .controller_data = &spi_ad7877_chip_info,
 },
index a2249dc4f2630e43f6a2de3b03aa86b1ca2b2912..c5ff1908d276f859ceb275031de6b47ce0cc60cf 100644 (file)
@@ -503,7 +503,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
                .platform_data          = &bfin_ad7877_ts_info,
                .irq                    = IRQ_PF6,
                .max_speed_hz   = 12500000,     /* max spi clock (SCK) speed in HZ */
-               .bus_num        = 1,
+               .bus_num        = 0,
                .chip_select  = 1,
                .controller_data = &spi_ad7877_chip_info,
        },
index 2d30906626f98ffa13a2726ffbed077c45aaf997..bbd2a046d7c1cee568a581ee63c074ece6c7903b 100644 (file)
@@ -378,7 +378,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 
 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
 static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
-       .cs_change_per_word = 1,
+       .cs_change_per_word = 0,
        .enable_dma = 0,
        .bits_per_word = 16,
 };