{
v4l2_std_id *id = arg;
int found = 0;
- int i, err;
+ int i;
DEB_EE(("VIDIOC_S_STD\n"));
case VIDIOC_OVERLAY:
{
int on = *(int *)arg;
- int err = 0;
DEB_D(("VIDIOC_OVERLAY on:%d\n",on));
if (on != 0) {
case VIDIOCGMBUF:
{
struct video_mbuf *mbuf = arg;
- struct videobuf_queue *q;
int i;
/* fixme: number of capture buffers and sizes for v4l apps */
static int simple_config_lookup(struct dvb_frontend *fe,
struct tuner_params *t_params,
- int *frequency, u8 *config, u8 *cb)
+ unsigned *frequency, u8 *config, u8 *cb)
{
struct tuner_simple_priv *priv = fe->tuner_priv;
int i;
priv->last_div = div;
if (t_params->has_tda9887) {
struct v4l2_priv_tun_config tda9887_cfg;
- int config = 0;
+ int tda_config = 0;
int is_secam_l = (params->std & (V4L2_STD_SECAM_L |
V4L2_STD_SECAM_LC)) &&
!(params->std & ~(V4L2_STD_SECAM_L |
V4L2_STD_SECAM_LC));
tda9887_cfg.tuner = TUNER_TDA9887;
- tda9887_cfg.priv = &config;
+ tda9887_cfg.priv = &tda_config;
if (params->std == V4L2_STD_SECAM_LC) {
if (t_params->port1_active ^ t_params->port1_invert_for_secam_lc)
- config |= TDA9887_PORT1_ACTIVE;
+ tda_config |= TDA9887_PORT1_ACTIVE;
if (t_params->port2_active ^ t_params->port2_invert_for_secam_lc)
- config |= TDA9887_PORT2_ACTIVE;
+ tda_config |= TDA9887_PORT2_ACTIVE;
} else {
if (t_params->port1_active)
- config |= TDA9887_PORT1_ACTIVE;
+ tda_config |= TDA9887_PORT1_ACTIVE;
if (t_params->port2_active)
- config |= TDA9887_PORT2_ACTIVE;
+ tda_config |= TDA9887_PORT2_ACTIVE;
}
if (t_params->intercarrier_mode)
- config |= TDA9887_INTERCARRIER;
+ tda_config |= TDA9887_INTERCARRIER;
if (is_secam_l) {
if (i == 0 && t_params->default_top_secam_low)
- config |= TDA9887_TOP(t_params->default_top_secam_low);
+ tda_config |= TDA9887_TOP(t_params->default_top_secam_low);
else if (i == 1 && t_params->default_top_secam_mid)
- config |= TDA9887_TOP(t_params->default_top_secam_mid);
+ tda_config |= TDA9887_TOP(t_params->default_top_secam_mid);
else if (t_params->default_top_secam_high)
- config |= TDA9887_TOP(t_params->default_top_secam_high);
+ tda_config |= TDA9887_TOP(t_params->default_top_secam_high);
} else {
if (i == 0 && t_params->default_top_low)
- config |= TDA9887_TOP(t_params->default_top_low);
+ tda_config |= TDA9887_TOP(t_params->default_top_low);
else if (i == 1 && t_params->default_top_mid)
- config |= TDA9887_TOP(t_params->default_top_mid);
+ tda_config |= TDA9887_TOP(t_params->default_top_mid);
else if (t_params->default_top_high)
- config |= TDA9887_TOP(t_params->default_top_high);
+ tda_config |= TDA9887_TOP(t_params->default_top_high);
}
if (t_params->default_pll_gating_18)
- config |= TDA9887_GATING_18;
+ tda_config |= TDA9887_GATING_18;
i2c_clients_command(priv->i2c_props.adap, TUNER_SET_CONFIG,
&tda9887_cfg);
}
static struct tuner_params *t_params;
u8 config, cb;
u32 div;
- int ret, frequency = params->frequency / 62500;
+ int ret;
+ unsigned frequency = params->frequency / 62500;
t_params = simple_tuner_params(fe, TUNER_PARAM_TYPE_DIGITAL);
ret = simple_config_lookup(fe, t_params, &frequency, &config, &cb);
struct timespec timeout = { 0 };
struct dmx_pes_filter_params *para = &filter->params.pes;
dmx_output_t otype;
- int ret;
int ts_type;
enum dmx_ts_pes ts_pes;
struct dmx_ts_feed **tsfeed = &filter->feed.ts;
/* we need this extra check for annoying interfaces like the budget-av */
if ((!(ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE)) &&
(ca->pub->poll_slot_status)) {
- int status = ca->pub->poll_slot_status(ca->pub, slot, 0);
+ status = ca->pub->poll_slot_status(ca->pub, slot, 0);
if (!(status & DVB_CA_EN50221_POLL_CAM_PRESENT)) {
ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_NONE;
dvb_ca_en50221_thread_update_delay(ca);
/* we need this extra check for annoying interfaces like the budget-av */
if ((!(ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE)) &&
(ca->pub->poll_slot_status)) {
- int status = ca->pub->poll_slot_status(ca->pub, slot, 0);
+ status = ca->pub->poll_slot_status(ca->pub, slot, 0);
if (!(status & DVB_CA_EN50221_POLL_CAM_PRESENT)) {
ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_NONE;
dvb_ca_en50221_thread_update_delay(ca);
* initialization, so parg is 8 bits and does not
* include the initialization or start bit
*/
- unsigned long cmd = ((unsigned long) parg) << 1;
+ unsigned long swcmd = ((unsigned long) parg) << 1;
struct timeval nexttime;
struct timeval tv[10];
int i;
u8 last = 1;
if (dvb_frontend_debug)
- printk("%s switch command: 0x%04lx\n", __func__, cmd);
+ printk("%s switch command: 0x%04lx\n", __func__, swcmd);
do_gettimeofday(&nexttime);
if (dvb_frontend_debug)
memcpy(&tv[0], &nexttime, sizeof(struct timeval));
for (i = 0; i < 9; i++) {
if (dvb_frontend_debug)
do_gettimeofday(&tv[i + 1]);
- if ((cmd & 0x01) != last) {
+ if ((swcmd & 0x01) != last) {
/* set voltage to (last ? 13V : 18V) */
fe->ops.set_voltage(fe, (last) ? SEC_VOLTAGE_13 : SEC_VOLTAGE_18);
last = (last) ? 0 : 1;
}
- cmd = cmd >> 1;
+ swcmd = swcmd >> 1;
if (i != 8)
dvb_frontend_sleep_until(&nexttime, 8000);
}
if (d->state == DVB_USB_STATE_INIT &&
usb_set_interface(d->udev, 0, 0) < 0)
err("set interface failed");
- do; while (!(ret = cxusb_ctrl_msg(d, CMD_POWER_ON, NULL, 0, NULL, 0)) &&
+ do {} while (!(ret = cxusb_ctrl_msg(d, CMD_POWER_ON, NULL, 0, NULL, 0)) &&
!(ret = cxusb_ctrl_msg(d, 0x15, NULL, 0, NULL, 0)) &&
!(ret = cxusb_ctrl_msg(d, 0x17, NULL, 0, NULL, 0)) && 0);
if (!ret) {
{
unsigned long int si;
int bl;
- int data = FREQ2BITS(freq);
+ int val = FREQ2BITS(freq);
/* TEA5757 shift register bits (see pdf) */
- outbit(0,io); // 24 search
- outbit(1,io); // 23 search up/down
+ outbit(0, io); /* 24 search */
+ outbit(1, io); /* 23 search up/down */
- outbit(0,io); // 22 stereo/mono
+ outbit(0, io); /* 22 stereo/mono */
- outbit(0,io); // 21 band
- outbit(0,io); // 20 band (only 00=FM works I think)
+ outbit(0, io); /* 21 band */
+ outbit(0, io); /* 20 band (only 00=FM works I think) */
- outbit(0,io); // 19 port ?
- outbit(0,io); // 18 port ?
+ outbit(0, io); /* 19 port ? */
+ outbit(0, io); /* 18 port ? */
- outbit(0,io); // 17 search level
- outbit(0,io); // 16 search level
+ outbit(0, io); /* 17 search level */
+ outbit(0, io); /* 16 search level */
si = 0x8000;
- for (bl = 1; bl <= 16 ; bl++) {
- outbit(data & si,io);
- si >>=1;
+ for (bl = 1; bl <= 16; bl++) {
+ outbit(val & si, io);
+ si >>= 1;
}
dprintk(1, "Radio freq set to %d.%02d MHz\n",
static void flyvideo_gpio(struct bttv *btv)
{
- int gpio,has_remote,has_radio,is_capture_only,is_lr90,has_tda9820_tda9821;
- int tuner=UNSET,ttype;
+ int gpio, has_remote, has_radio, is_capture_only;
+ int is_lr90, has_tda9820_tda9821;
+ int tuner_type = UNSET, ttype;
gpio_inout(0xffffff, 0);
udelay(8); /* without this we would see the 0x1800 mask */
* xxxF00(LR26/LR50), xxxFE0(LR90): Remote control chip (LVA001 or CF45) soldered
* Note: Some bits are Audio_Mask !
*/
- ttype=(gpio&0x0f0000)>>16;
- switch(ttype) {
- case 0x0: tuner=2; /* NTSC, e.g. TPI8NSR11P */
+ ttype = (gpio & 0x0f0000) >> 16;
+ switch (ttype) {
+ case 0x0:
+ tuner_type = 2; /* NTSC, e.g. TPI8NSR11P */
break;
- case 0x2: tuner=39;/* LG NTSC (newer TAPC series) TAPC-H701P */
+ case 0x2:
+ tuner_type = 39; /* LG NTSC (newer TAPC series) TAPC-H701P */
break;
- case 0x4: tuner=5; /* Philips PAL TPI8PSB02P, TPI8PSB12P, TPI8PSB12D or FI1216, FM1216 */
+ case 0x4:
+ tuner_type = 5; /* Philips PAL TPI8PSB02P, TPI8PSB12P, TPI8PSB12D or FI1216, FM1216 */
break;
- case 0x6: tuner=37;/* LG PAL (newer TAPC series) TAPC-G702P */
+ case 0x6:
+ tuner_type = 37; /* LG PAL (newer TAPC series) TAPC-G702P */
break;
- case 0xC: tuner=3; /* Philips SECAM(+PAL) FQ1216ME or FI1216MF */
+ case 0xC:
+ tuner_type = 3; /* Philips SECAM(+PAL) FQ1216ME or FI1216MF */
break;
default:
printk(KERN_INFO "bttv%d: FlyVideo_gpio: unknown tuner type.\n", btv->c.nr);
+ break;
}
has_remote = gpio & 0x800000;
/*
* gpio & 0x001000 output bit for audio routing */
- if(is_capture_only)
- tuner = TUNER_ABSENT; /* No tuner present */
+ if (is_capture_only)
+ tuner_type = TUNER_ABSENT; /* No tuner present */
printk(KERN_INFO "bttv%d: FlyVideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n",
- btv->c.nr, has_radio? "yes":"no ", has_remote? "yes":"no ", tuner, gpio);
+ btv->c.nr, has_radio ? "yes" : "no ",
+ has_remote ? "yes" : "no ", tuner_type, gpio);
printk(KERN_INFO "bttv%d: FlyVideo LR90=%s tda9821/tda9820=%s capture_only=%s\n",
- btv->c.nr, is_lr90?"yes":"no ", has_tda9820_tda9821?"yes":"no ",
- is_capture_only?"yes":"no ");
+ btv->c.nr, is_lr90 ? "yes" : "no ",
+ has_tda9820_tda9821 ? "yes" : "no ",
+ is_capture_only ? "yes" : "no ");
- if (tuner != UNSET) /* only set if known tuner autodetected, else let insmod option through */
- btv->tuner_type = tuner;
+ if (tuner_type != UNSET) /* only set if known tuner autodetected, else let insmod option through */
+ btv->tuner_type = tuner_type;
btv->has_radio = has_radio;
/* LR90 Audio Routing is done by 2 hef4052, so Audio_Mask has 4 bits: 0x001c80
* LR26/LR50 only has 1 hef4052, Audio_Mask 0x000c00
* Audio options: from tuner, from tda9821/tda9821(mono,stereo,sap), from tda9874, ext., mute */
- if(has_tda9820_tda9821) btv->audio_mode_gpio = lt9415_audio;
+ if (has_tda9820_tda9821)
+ btv->audio_mode_gpio = lt9415_audio;
/* todo: if(has_tda9874) btv->audio_mode_gpio = fv2000s_audio; */
}
static void __devinit avermedia_eeprom(struct bttv *btv)
{
- int tuner_make,tuner_tv_fm,tuner_format,tuner=0;
+ int tuner_make, tuner_tv_fm, tuner_format, tuner_type = 0;
tuner_make = (eeprom_data[0x41] & 0x7);
tuner_tv_fm = (eeprom_data[0x41] & 0x18) >> 3;
btv->has_remote = (eeprom_data[0x42] & 0x01);
if (tuner_make == 0 || tuner_make == 2)
- if(tuner_format <=0x0a)
- tuner = tuner_0_table[tuner_format];
+ if (tuner_format <= 0x0a)
+ tuner_type = tuner_0_table[tuner_format];
if (tuner_make == 1)
- if(tuner_format <=9)
- tuner = tuner_1_table[tuner_format];
+ if (tuner_format <= 9)
+ tuner_type = tuner_1_table[tuner_format];
if (tuner_make == 4)
- if(tuner_format == 0x09)
- tuner = TUNER_LG_NTSC_NEW_TAPC; /* TAPC-G702P */
+ if (tuner_format == 0x09)
+ tuner_type = TUNER_LG_NTSC_NEW_TAPC; /* TAPC-G702P */
printk(KERN_INFO "bttv%d: Avermedia eeprom[0x%02x%02x]: tuner=",
- btv->c.nr,eeprom_data[0x41],eeprom_data[0x42]);
- if(tuner) {
- btv->tuner_type=tuner;
- printk("%d",tuner);
+ btv->c.nr, eeprom_data[0x41], eeprom_data[0x42]);
+ if (tuner_type) {
+ btv->tuner_type = tuner_type;
+ printk(KERN_CONT "%d", tuner_type);
} else
- printk("Unknown type");
- printk(" radio:%s remote control:%s\n",
+ printk(KERN_CONT "Unknown type");
+ printk(KERN_CONT " radio:%s remote control:%s\n",
tuner_tv_fm ? "yes" : "no",
btv->has_remote ? "yes" : "no");
}
static unsigned int uv_ratio = 50;
static unsigned int full_luma_range;
static unsigned int coring;
-extern int no_overlay;
/* API features (turn on/off stuff for testing) */
static unsigned int v4l2 = 1;
const struct bttv_format *fmt, struct bttv_overlay *ov,
int skip_even, int skip_odd)
{
- int dwords,rc,line,maxy,start,end,skip,nskips;
+ int dwords, rc, line, maxy, start, end;
+ unsigned skip, nskips;
struct btcx_skiplist *skips;
__le32 *rp;
u32 ri,ra;
int bttv_sub_add_device(struct bttv_core *core, char *name);
int bttv_sub_del_devices(struct bttv_core *core);
+/* ---------------------------------------------------------- */
+/* bttv-cards.c */
+
+extern int no_overlay;
+
/* ---------------------------------------------------------- */
/* bttv-driver.c */
}
void
-btcx_calc_skips(int line, int width, unsigned int *maxy,
+btcx_calc_skips(int line, int width, int *maxy,
struct btcx_skiplist *skips, unsigned int *nskips,
const struct v4l2_clip *clips, unsigned int nclips)
{
unsigned int clip,skip;
- int end,maxline;
+ int end, maxline;
skip=0;
maxline = 9999;
int btcx_align(struct v4l2_rect *win, struct v4l2_clip *clips,
unsigned int n, int mask);
void btcx_sort_clips(struct v4l2_clip *clips, unsigned int nclips);
-void btcx_calc_skips(int line, int width, unsigned int *maxy,
+void btcx_calc_skips(int line, int width, int *maxy,
struct btcx_skiplist *skips, unsigned int *nskips,
const struct v4l2_clip *clips, unsigned int nclips);
if(cam->params.pnp_id.device_type == DEVICE_STV_672 &&
cam->params.version.sensor_flags==CPIA2_VP_SENSOR_FLAGS_500){
// Maximum 15fps
- int i;
for(i=0; i<c->maximum; ++i) {
if(framerate_controls[i].value ==
CPIA2_VP_FRAMERATE_15) {
u32 v;
const u8 *ptr;
int i;
- int retries = 0;
+ int retries1 = 0;
if (request_firmware(&fw, FWFILE, &cx->dev->dev) != 0) {
CX18_ERR("unable to open firmware %s\n", FWFILE);
/* The firmware load often has byte errors, so allow for several
retries, both at byte level and at the firmware load level. */
- while (retries < 5) {
+ while (retries1 < 5) {
cx18_av_write4(cx, CXADEC_CHIP_CTRL, 0x00010000);
cx18_av_write(cx, CXADEC_STD_DET_CTL, 0xf6);
for (i = 0; i < size; i++) {
u32 dl_control = 0x0F000000 | i | ((u32)ptr[i] << 16);
u32 value = 0;
- int retries;
+ int retries2;
- for (retries = 0; retries < 5; retries++) {
+ for (retries2 = 0; retries2 < 5; retries2++) {
cx18_av_write4(cx, CXADEC_DL_CTL, dl_control);
udelay(10);
value = cx18_av_read4(cx, CXADEC_DL_CTL);
the address. We can only write the lower
address byte of the address. */
if ((value & 0x3F00) != (dl_control & 0x3F00)) {
- retries = 5;
+ retries2 = 5;
break;
}
}
- if (retries >= 5)
+ if (retries2 >= 5)
break;
}
if (i == size)
break;
- retries++;
+ retries1++;
}
- if (retries >= 5) {
+ if (retries1 >= 5) {
CX18_ERR("unable to load firmware %s\n", FWFILE);
release_firmware(fw);
return -EIO;
-1, -1, -1, -1, -1, -1, -1, -1,
-1, -1, -1, -1, -1, -1, -1, -1 };
-static int cardtype_c = 1;
-static int tuner_c = 1;
-static int radio_c = 1;
+static unsigned cardtype_c = 1;
+static unsigned tuner_c = 1;
+static unsigned radio_c = 1;
static char pal[] = "--";
static char secam[] = "--";
static char ntsc[] = "-";
s->name, s->buffers, s->buf_size,
s->buffers * s->buf_size / 1024);
- if (((char *)&cx->scb->cpu_mdl[cx->mdl_offset + s->buffers] -
- (char *)cx->scb) > SCB_RESERVED_SIZE) {
- unsigned bufsz = (((char *)cx->scb) + SCB_RESERVED_SIZE -
- ((char *)cx->scb->cpu_mdl));
+ if (((char __iomem *)&cx->scb->cpu_mdl[cx->mdl_offset + s->buffers] -
+ (char __iomem *)cx->scb) > SCB_RESERVED_SIZE) {
+ unsigned bufsz = (((char __iomem *)cx->scb) + SCB_RESERVED_SIZE -
+ ((char __iomem *)cx->scb->cpu_mdl));
CX18_ERR("Too many buffers, cannot fit in SCB area\n");
CX18_ERR("Max buffers = %zd\n",
i = ret; /* frame index */
frame = &gspca_dev->frame[i];
if (gspca_dev->memory == V4L2_MEMORY_USERPTR) {
- if (copy_to_user((__u8 *) frame->v4l2_buf.m.userptr,
+ if (copy_to_user((__u8 __user *) frame->v4l2_buf.m.userptr,
frame->data,
frame->v4l2_buf.bytesused)) {
PDEBUG(D_ERR|D_STREAM,
case DECODER_ENABLE_OUTPUT:
{
+ int enable;
- int *iarg = arg;
- int enable = (*iarg != 0);
- if (enable) {
- dprintk("ks0127: command "
+ iarg = arg;
+ enable = (*iarg != 0);
+ if (enable) {
+ dprintk("ks0127: command "
"DECODER_ENABLE_OUTPUT on "
"(%d)\n", enable);
- /* All output pins on */
- ks0127_and_or(ks, KS_OFMTA, 0xcf, 0x30);
- /* Obey the OEN pin */
- ks0127_and_or(ks, KS_CDEM, 0x7f, 0x00);
- } else {
- dprintk("ks0127: command "
+ /* All output pins on */
+ ks0127_and_or(ks, KS_OFMTA, 0xcf, 0x30);
+ /* Obey the OEN pin */
+ ks0127_and_or(ks, KS_CDEM, 0x7f, 0x00);
+ } else {
+ dprintk("ks0127: command "
"DECODER_ENABLE_OUTPUT off "
"(%d)\n", enable);
- /* Video output pins off */
- ks0127_and_or(ks, KS_OFMTA, 0xcf, 0x00);
- /* Ignore the OEN pin */
- ks0127_and_or(ks, KS_CDEM, 0x7f, 0x80);
- }
+ /* Video output pins off */
+ ks0127_and_or(ks, KS_OFMTA, 0xcf, 0x00);
+ /* Ignore the OEN pin */
+ ks0127_and_or(ks, KS_CDEM, 0x7f, 0x80);
+ }
}
break;
return 0;
}
-static int std_callback(struct saa7146_dev* dev, struct saa7146_standard *std)
+static int std_callback(struct saa7146_dev *dev, struct saa7146_standard *standard)
{
- struct mxb* mxb = (struct mxb*)dev->ext_priv;
+ struct mxb *mxb = (struct mxb *)dev->ext_priv;
int zero = 0;
int one = 1;
- if(V4L2_STD_PAL_I == std->id ) {
+ if (V4L2_STD_PAL_I == standard->id) {
v4l2_std_id std = V4L2_STD_PAL_I;
+
DEB_D(("VIDIOC_S_STD: setting mxb for PAL_I.\n"));
/* set the 7146 gpio register -- I don't know what this does exactly */
saa7146_write(dev, GPIO_CTRL, 0x00404050);
/* unset the 7111 gpio register -- I don't know what this does exactly */
- mxb->saa7111a->driver->command(mxb->saa7111a,DECODER_SET_GPIO, &zero);
+ mxb->saa7111a->driver->command(mxb->saa7111a, DECODER_SET_GPIO, &zero);
mxb->tuner->driver->command(mxb->tuner, VIDIOC_S_STD, &std);
} else {
v4l2_std_id std = V4L2_STD_PAL_BG;
+
DEB_D(("VIDIOC_S_STD: setting mxb for PAL/NTSC/SECAM.\n"));
/* set the 7146 gpio register -- I don't know what this does exactly */
saa7146_write(dev, GPIO_CTRL, 0x00404050);
/* set the 7111 gpio register -- I don't know what this does exactly */
- mxb->saa7111a->driver->command(mxb->saa7111a,DECODER_SET_GPIO, &one);
+ mxb->saa7111a->driver->command(mxb->saa7111a, DECODER_SET_GPIO, &one);
mxb->tuner->driver->command(mxb->tuner, VIDIOC_S_STD, &std);
}
return 0;
break;
/* Retry until idle */
- do
+ do {
rc = reg_r(ov, R511_I2C_CTL);
- while (rc > 0 && ((rc&1) == 0));
+ } while (rc > 0 && ((rc&1) == 0));
if (rc < 0)
break;
return rc;
/* Retry until idle */
- do
- rc = reg_r(ov, R511_I2C_CTL);
- while (rc > 0 && ((rc&1) == 0));
+ do {
+ rc = reg_r(ov, R511_I2C_CTL);
+ } while (rc > 0 && ((rc & 1) == 0));
if (rc < 0)
return rc;
return rc;
/* Retry until idle */
- do
+ do {
rc = reg_r(ov, R511_I2C_CTL);
- while (rc > 0 && ((rc&1) == 0));
+ } while (rc > 0 && ((rc&1) == 0));
if (rc < 0)
return rc;
case VIDIOCPWCGVIDCMD:
{
- ARG_DEF(struct pwc_video_command, cmd);
-
- ARGR(cmd).type = pdev->type;
- ARGR(cmd).release = pdev->release;
- ARGR(cmd).command_len = pdev->cmd_len;
- memcpy(&ARGR(cmd).command_buf, pdev->cmd_buf, pdev->cmd_len);
- ARGR(cmd).bandlength = pdev->vbandlength;
- ARGR(cmd).frame_size = pdev->frame_size;
- ARG_OUT(cmd)
+ ARG_DEF(struct pwc_video_command, vcmd);
+
+ ARGR(vcmd).type = pdev->type;
+ ARGR(vcmd).release = pdev->release;
+ ARGR(vcmd).command_len = pdev->cmd_len;
+ memcpy(&ARGR(vcmd).command_buf, pdev->cmd_buf, pdev->cmd_len);
+ ARGR(vcmd).bandlength = pdev->vbandlength;
+ ARGR(vcmd).frame_size = pdev->frame_size;
+ ARG_OUT(vcmd)
break;
}
/*
* make black color and quit the horizontal scanning loop.
*/
if (((frame->curline + 2) >= scanHeight) || (i >= scanLength)) {
- const int j = i * V4L_BYTES_PER_PIXEL;
+ const int offset = i * V4L_BYTES_PER_PIXEL;
#if USES_IBMCAM_PUTPIXEL
/* Refresh 'f' because we don't use it much with PUTPIXEL */
- f = frame->data + (v4l_linesize * frame->curline) + j;
+ f = frame->data + (v4l_linesize * frame->curline) + offset;
#endif
- memset(f, 0, v4l_linesize - j);
+ memset(f, 0, v4l_linesize - offset);
break;
}
projects / linux-2.6 / commitdiff