//int mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag);
static int ProcessEventNotification(MPT_ADAPTER *ioc, EventNotificationReply_t *evReply, int *evHandlers);
-static void mpt_sp_ioc_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf);
+#ifdef MPT_DEBUG_REPLY
+static void mpt_iocstatus_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf);
+#endif
static void mpt_fc_log_info(MPT_ADAPTER *ioc, u32 log_info);
static void mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info);
static void mpt_sas_log_info(MPT_ADAPTER *ioc, u32 log_info);
else if (ioc->bus_type == SAS)
mpt_sas_log_info(ioc, log_info);
}
- if (ioc_stat & MPI_IOCSTATUS_MASK) {
- if (ioc->bus_type == SPI &&
- cb_idx != mpt_stm_index &&
- cb_idx != mpt_lan_index)
- mpt_sp_ioc_info(ioc, (u32)ioc_stat, mf);
- }
+#ifdef MPT_DEBUG_REPLY
+ if (ioc_stat & MPI_IOCSTATUS_MASK)
+ mpt_iocstatus_info(ioc, (u32)ioc_stat, mf);
+#endif
/* Check for (valid) IO callback! */
if (cb_idx < 1 || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS ||
return rc;
}
-# define EVENT_DESCR_STR_SZ 100
-
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
static void
EventDescriptionStr(u8 event, u32 evData0, char *evStr)
break;
case MPI_EVENT_RESCAN:
ds = "Bus Rescan Event";
- /* Ok, do we need to do anything here? As far as
- I can tell, this is when a new device gets added
- to the loop. */
break;
case MPI_EVENT_LINK_STATUS_CHANGE:
if (evData0 == MPI_EVENT_LINK_STATUS_FAILURE)
case MPI_EVENT_SAS_DEVICE_STATUS_CHANGE:
{
u8 id = (u8)(evData0);
+ u8 channel = (u8)(evData0 >> 8);
u8 ReasonCode = (u8)(evData0 >> 16);
switch (ReasonCode) {
case MPI_EVENT_SAS_DEV_STAT_RC_ADDED:
snprintf(evStr, EVENT_DESCR_STR_SZ,
- "SAS Device Status Change: Added: id=%d", id);
+ "SAS Device Status Change: Added: "
+ "id=%d channel=%d", id, channel);
break;
case MPI_EVENT_SAS_DEV_STAT_RC_NOT_RESPONDING:
snprintf(evStr, EVENT_DESCR_STR_SZ,
- "SAS Device Status Change: Deleted: id=%d", id);
+ "SAS Device Status Change: Deleted: "
+ "id=%d channel=%d", id, channel);
break;
case MPI_EVENT_SAS_DEV_STAT_RC_SMART_DATA:
snprintf(evStr, EVENT_DESCR_STR_SZ,
- "SAS Device Status Change: SMART Data: id=%d",
- id);
+ "SAS Device Status Change: SMART Data: "
+ "id=%d channel=%d", id, channel);
break;
case MPI_EVENT_SAS_DEV_STAT_RC_NO_PERSIST_ADDED:
snprintf(evStr, EVENT_DESCR_STR_SZ,
- "SAS Device Status Change: No Persistancy: id=%d", id);
+ "SAS Device Status Change: No Persistancy: "
+ "id=%d channel=%d", id, channel);
+ break;
+ case MPI_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED:
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "SAS Device Status Change: Unsupported Device "
+ "Discovered : id=%d channel=%d", id, channel);
break;
case MPI_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET:
snprintf(evStr, EVENT_DESCR_STR_SZ,
- "SAS Device Status Change: Internal Device Reset : id=%d", id);
+ "SAS Device Status Change: Internal Device "
+ "Reset : id=%d channel=%d", id, channel);
break;
case MPI_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL:
snprintf(evStr, EVENT_DESCR_STR_SZ,
- "SAS Device Status Change: Internal Task Abort : id=%d", id);
+ "SAS Device Status Change: Internal Task "
+ "Abort : id=%d channel=%d", id, channel);
break;
case MPI_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL:
snprintf(evStr, EVENT_DESCR_STR_SZ,
- "SAS Device Status Change: Internal Abort Task Set : id=%d", id);
+ "SAS Device Status Change: Internal Abort "
+ "Task Set : id=%d channel=%d", id, channel);
break;
case MPI_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL:
snprintf(evStr, EVENT_DESCR_STR_SZ,
- "SAS Device Status Change: Internal Clear Task Set : id=%d", id);
+ "SAS Device Status Change: Internal Clear "
+ "Task Set : id=%d channel=%d", id, channel);
break;
case MPI_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL:
snprintf(evStr, EVENT_DESCR_STR_SZ,
- "SAS Device Status Change: Internal Query Task : id=%d", id);
+ "SAS Device Status Change: Internal Query "
+ "Task : id=%d channel=%d", id, channel);
break;
default:
snprintf(evStr, EVENT_DESCR_STR_SZ,
- "SAS Device Status Change: Unknown: id=%d", id);
+ "SAS Device Status Change: Unknown: "
+ "id=%d channel=%d", id, channel);
break;
}
break;
ds = "Bus Timer Expired";
break;
case MPI_EVENT_QUEUE_FULL:
- ds = "Queue Full";
+ {
+ u16 curr_depth = (u16)(evData0 >> 16);
+ u8 channel = (u8)(evData0 >> 8);
+ u8 id = (u8)(evData0);
+
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "Queue Full: channel=%d id=%d depth=%d",
+ channel, id, curr_depth);
break;
+ }
case MPI_EVENT_SAS_SES:
ds = "SAS SES Event";
break;
ds = "SAS Log Entry Added";
break;
+ case MPI_EVENT_SAS_BROADCAST_PRIMITIVE:
+ {
+ u8 phy_num = (u8)(evData0);
+ u8 port_num = (u8)(evData0 >> 8);
+ u8 port_width = (u8)(evData0 >> 16);
+ u8 primative = (u8)(evData0 >> 24);
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "SAS Broadcase Primative: phy=%d port=%d "
+ "width=%d primative=0x%02x",
+ phy_num, port_num, port_width, primative);
+ break;
+ }
+
+ case MPI_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE:
+ {
+ u8 reason = (u8)(evData0);
+ u8 port_num = (u8)(evData0 >> 8);
+ u16 handle = le16_to_cpu(evData0 >> 16);
+
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "SAS Initiator Device Status Change: reason=0x%02x "
+ "port=%d handle=0x%04x",
+ reason, port_num, handle);
+ break;
+ }
+
+ case MPI_EVENT_SAS_INIT_TABLE_OVERFLOW:
+ {
+ u8 max_init = (u8)(evData0);
+ u8 current_init = (u8)(evData0 >> 8);
+
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "SAS Initiator Device Table Overflow: max initiators=%02d "
+ "current initators=%02d",
+ max_init, current_init);
+ break;
+ }
+ case MPI_EVENT_SAS_SMP_ERROR:
+ {
+ u8 status = (u8)(evData0);
+ u8 port_num = (u8)(evData0 >> 8);
+ u8 result = (u8)(evData0 >> 16);
+
+ if (status == MPI_EVENT_SAS_SMP_FUNCTION_RESULT_VALID)
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "SAS SMP Error: port=%d result=0x%02x",
+ port_num, result);
+ else if (status == MPI_EVENT_SAS_SMP_CRC_ERROR)
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "SAS SMP Error: port=%d : CRC Error",
+ port_num);
+ else if (status == MPI_EVENT_SAS_SMP_TIMEOUT)
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "SAS SMP Error: port=%d : Timeout",
+ port_num);
+ else if (status == MPI_EVENT_SAS_SMP_NO_DESTINATION)
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "SAS SMP Error: port=%d : No Destination",
+ port_num);
+ else if (status == MPI_EVENT_SAS_SMP_BAD_DESTINATION)
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "SAS SMP Error: port=%d : Bad Destination",
+ port_num);
+ else
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "SAS SMP Error: port=%d : status=0x%02x",
+ port_num, status);
+ break;
+ }
+
/*
* MPT base "custom" events may be added here...
*/
"Abort", /* 12h */
"IO Not Yet Executed", /* 13h */
"IO Executed", /* 14h */
- "Persistent Reservation Out Not Affiliation Owner", /* 15h */
+ "Persistent Reservation Out Not Affiliation "
+ "Owner", /* 15h */
"Open Transmit DMA Abort", /* 16h */
"IO Device Missing Delay Retry", /* 17h */
- NULL, /* 18h */
+ "IO Cancelled Due to Recieve Error", /* 18h */
NULL, /* 19h */
NULL, /* 1Ah */
NULL, /* 1Bh */
NULL, /* 1Fh */
"Enclosure Management" /* 20h */
};
+ static char *ir_code_str[] = {
+ "Raid Action Error", /* 00h */
+ NULL, /* 00h */
+ NULL, /* 01h */
+ NULL, /* 02h */
+ NULL, /* 03h */
+ NULL, /* 04h */
+ NULL, /* 05h */
+ NULL, /* 06h */
+ NULL /* 07h */
+ };
+ static char *raid_sub_code_str[] = {
+ NULL, /* 00h */
+ "Volume Creation Failed: Data Passed too "
+ "Large", /* 01h */
+ "Volume Creation Failed: Duplicate Volumes "
+ "Attempted", /* 02h */
+ "Volume Creation Failed: Max Number "
+ "Supported Volumes Exceeded", /* 03h */
+ "Volume Creation Failed: DMA Error", /* 04h */
+ "Volume Creation Failed: Invalid Volume Type", /* 05h */
+ "Volume Creation Failed: Error Reading "
+ "MFG Page 4", /* 06h */
+ "Volume Creation Failed: Creating Internal "
+ "Structures", /* 07h */
+ NULL, /* 08h */
+ NULL, /* 09h */
+ NULL, /* 0Ah */
+ NULL, /* 0Bh */
+ NULL, /* 0Ch */
+ NULL, /* 0Dh */
+ NULL, /* 0Eh */
+ NULL, /* 0Fh */
+ "Activation failed: Already Active Volume", /* 10h */
+ "Activation failed: Unsupported Volume Type", /* 11h */
+ "Activation failed: Too Many Active Volumes", /* 12h */
+ "Activation failed: Volume ID in Use", /* 13h */
+ "Activation failed: Reported Failure", /* 14h */
+ "Activation failed: Importing a Volume", /* 15h */
+ NULL, /* 16h */
+ NULL, /* 17h */
+ NULL, /* 18h */
+ NULL, /* 19h */
+ NULL, /* 1Ah */
+ NULL, /* 1Bh */
+ NULL, /* 1Ch */
+ NULL, /* 1Dh */
+ NULL, /* 1Eh */
+ NULL, /* 1Fh */
+ "Phys Disk failed: Too Many Phys Disks", /* 20h */
+ "Phys Disk failed: Data Passed too Large", /* 21h */
+ "Phys Disk failed: DMA Error", /* 22h */
+ "Phys Disk failed: Invalid <channel:id>", /* 23h */
+ "Phys Disk failed: Creating Phys Disk Config "
+ "Page", /* 24h */
+ NULL, /* 25h */
+ NULL, /* 26h */
+ NULL, /* 27h */
+ NULL, /* 28h */
+ NULL, /* 29h */
+ NULL, /* 2Ah */
+ NULL, /* 2Bh */
+ NULL, /* 2Ch */
+ NULL, /* 2Dh */
+ NULL, /* 2Eh */
+ NULL, /* 2Fh */
+ "Compatibility Error: IR Disabled", /* 30h */
+ "Compatibility Error: Inquiry Comand Failed", /* 31h */
+ "Compatibility Error: Device not Direct Access "
+ "Device ", /* 32h */
+ "Compatibility Error: Removable Device Found", /* 33h */
+ "Compatibility Error: Device SCSI Version not "
+ "2 or Higher", /* 34h */
+ "Compatibility Error: SATA Device, 48 BIT LBA "
+ "not Supported", /* 35h */
+ "Compatibility Error: Device doesn't have "
+ "512 Byte Block Sizes", /* 36h */
+ "Compatibility Error: Volume Type Check Failed", /* 37h */
+ "Compatibility Error: Volume Type is "
+ "Unsupported by FW", /* 38h */
+ "Compatibility Error: Disk Drive too Small for "
+ "use in Volume", /* 39h */
+ "Compatibility Error: Phys Disk for Create "
+ "Volume not Found", /* 3Ah */
+ "Compatibility Error: Too Many or too Few "
+ "Disks for Volume Type", /* 3Bh */
+ "Compatibility Error: Disk stripe Sizes "
+ "Must be 64KB", /* 3Ch */
+ "Compatibility Error: IME Size Limited to < 2TB", /* 3Dh */
+ };
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
* @log_info: U32 LogInfo reply word from the IOC
*
* Refer to lsi/mpi_log_sas.h.
- */
+ **/
static void
mpt_sas_log_info(MPT_ADAPTER *ioc, u32 log_info)
{
}dw;
};
union loginfo_type sas_loginfo;
+ char *originator_desc = NULL;
char *code_desc = NULL;
+ char *sub_code_desc = NULL;
sas_loginfo.loginfo = log_info;
if ((sas_loginfo.dw.bus_type != 3 /*SAS*/) &&
(sas_loginfo.dw.originator < sizeof(originator_str)/sizeof(char*)))
return;
- if ((sas_loginfo.dw.originator == 0 /*IOP*/) &&
- (sas_loginfo.dw.code < sizeof(iop_code_str)/sizeof(char*))) {
- code_desc = iop_code_str[sas_loginfo.dw.code];
- }else if ((sas_loginfo.dw.originator == 1 /*PL*/) &&
- (sas_loginfo.dw.code < sizeof(pl_code_str)/sizeof(char*) )) {
- code_desc = pl_code_str[sas_loginfo.dw.code];
+
+ originator_desc = originator_str[sas_loginfo.dw.originator];
+
+ switch (sas_loginfo.dw.originator) {
+
+ case 0: /* IOP */
+ if (sas_loginfo.dw.code <
+ sizeof(iop_code_str)/sizeof(char*))
+ code_desc = iop_code_str[sas_loginfo.dw.code];
+ break;
+ case 1: /* PL */
+ if (sas_loginfo.dw.code <
+ sizeof(pl_code_str)/sizeof(char*))
+ code_desc = pl_code_str[sas_loginfo.dw.code];
+ break;
+ case 2: /* IR */
+ if (sas_loginfo.dw.code >=
+ sizeof(ir_code_str)/sizeof(char*))
+ break;
+ code_desc = ir_code_str[sas_loginfo.dw.code];
+ if (sas_loginfo.dw.subcode >=
+ sizeof(raid_sub_code_str)/sizeof(char*))
+ break;
+ if (sas_loginfo.dw.code == 0)
+ sub_code_desc =
+ raid_sub_code_str[sas_loginfo.dw.subcode];
+ break;
+ default:
+ return;
}
- if (code_desc != NULL)
+ if (sub_code_desc != NULL)
+ printk(MYIOC_s_INFO_FMT
+ "LogInfo(0x%08x): Originator={%s}, Code={%s},"
+ " SubCode={%s}\n",
+ ioc->name, log_info, originator_desc, code_desc,
+ sub_code_desc);
+ else if (code_desc != NULL)
printk(MYIOC_s_INFO_FMT
"LogInfo(0x%08x): Originator={%s}, Code={%s},"
" SubCode(0x%04x)\n",
- ioc->name,
- log_info,
- originator_str[sas_loginfo.dw.originator],
- code_desc,
+ ioc->name, log_info, originator_desc, code_desc,
sas_loginfo.dw.subcode);
else
printk(MYIOC_s_INFO_FMT
"LogInfo(0x%08x): Originator={%s}, Code=(0x%02x),"
" SubCode(0x%04x)\n",
- ioc->name,
- log_info,
- originator_str[sas_loginfo.dw.originator],
- sas_loginfo.dw.code,
- sas_loginfo.dw.subcode);
+ ioc->name, log_info, originator_desc,
+ sas_loginfo.dw.code, sas_loginfo.dw.subcode);
}
+#ifdef MPT_DEBUG_REPLY
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
- * mpt_sp_ioc_info - IOC information returned from SCSI Parallel IOC.
+ * mpt_iocstatus_info_config - IOCSTATUS information for config pages
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * ioc_status: U32 IOCStatus word from IOC
+ * @mf: Pointer to MPT request frame
+ *
+ * Refer to lsi/mpi.h.
+ **/
+static void
+mpt_iocstatus_info_config(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf)
+{
+ Config_t *pReq = (Config_t *)mf;
+ char extend_desc[EVENT_DESCR_STR_SZ];
+ char *desc = NULL;
+ u32 form;
+ u8 page_type;
+
+ if (pReq->Header.PageType == MPI_CONFIG_PAGETYPE_EXTENDED)
+ page_type = pReq->ExtPageType;
+ else
+ page_type = pReq->Header.PageType;
+
+ /*
+ * ignore invalid page messages for GET_NEXT_HANDLE
+ */
+ form = le32_to_cpu(pReq->PageAddress);
+ if (ioc_status == MPI_IOCSTATUS_CONFIG_INVALID_PAGE) {
+ if (page_type == MPI_CONFIG_EXTPAGETYPE_SAS_DEVICE ||
+ page_type == MPI_CONFIG_EXTPAGETYPE_SAS_EXPANDER ||
+ page_type == MPI_CONFIG_EXTPAGETYPE_ENCLOSURE) {
+ if ((form >> MPI_SAS_DEVICE_PGAD_FORM_SHIFT) ==
+ MPI_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE)
+ return;
+ }
+ if (page_type == MPI_CONFIG_PAGETYPE_FC_DEVICE)
+ if ((form & MPI_FC_DEVICE_PGAD_FORM_MASK) ==
+ MPI_FC_DEVICE_PGAD_FORM_NEXT_DID)
+ return;
+ }
+
+ snprintf(extend_desc, EVENT_DESCR_STR_SZ,
+ "type=%02Xh, page=%02Xh, action=%02Xh, form=%08Xh",
+ page_type, pReq->Header.PageNumber, pReq->Action, form);
+
+ switch (ioc_status) {
+
+ case MPI_IOCSTATUS_CONFIG_INVALID_ACTION: /* 0x0020 */
+ desc = "Config Page Invalid Action";
+ break;
+
+ case MPI_IOCSTATUS_CONFIG_INVALID_TYPE: /* 0x0021 */
+ desc = "Config Page Invalid Type";
+ break;
+
+ case MPI_IOCSTATUS_CONFIG_INVALID_PAGE: /* 0x0022 */
+ desc = "Config Page Invalid Page";
+ break;
+
+ case MPI_IOCSTATUS_CONFIG_INVALID_DATA: /* 0x0023 */
+ desc = "Config Page Invalid Data";
+ break;
+
+ case MPI_IOCSTATUS_CONFIG_NO_DEFAULTS: /* 0x0024 */
+ desc = "Config Page No Defaults";
+ break;
+
+ case MPI_IOCSTATUS_CONFIG_CANT_COMMIT: /* 0x0025 */
+ desc = "Config Page Can't Commit";
+ break;
+ }
+
+ if (!desc)
+ return;
+
+ printk(MYIOC_s_INFO_FMT "IOCStatus(0x%04X): %s: %s\n",
+ ioc->name, ioc_status, desc, extend_desc);
+}
+
+/**
+ * mpt_iocstatus_info - IOCSTATUS information returned from IOC.
* @ioc: Pointer to MPT_ADAPTER structure
* @ioc_status: U32 IOCStatus word from IOC
* @mf: Pointer to MPT request frame
*
* Refer to lsi/mpi.h.
- */
+ **/
static void
-mpt_sp_ioc_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf)
+mpt_iocstatus_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf)
{
u32 status = ioc_status & MPI_IOCSTATUS_MASK;
char *desc = NULL;
switch (status) {
+
+/****************************************************************************/
+/* Common IOCStatus values for all replies */
+/****************************************************************************/
+
case MPI_IOCSTATUS_INVALID_FUNCTION: /* 0x0001 */
desc = "Invalid Function";
break;
desc = "Invalid State";
break;
+/****************************************************************************/
+/* Config IOCStatus values */
+/****************************************************************************/
+
case MPI_IOCSTATUS_CONFIG_INVALID_ACTION: /* 0x0020 */
case MPI_IOCSTATUS_CONFIG_INVALID_TYPE: /* 0x0021 */
case MPI_IOCSTATUS_CONFIG_INVALID_PAGE: /* 0x0022 */
case MPI_IOCSTATUS_CONFIG_INVALID_DATA: /* 0x0023 */
case MPI_IOCSTATUS_CONFIG_NO_DEFAULTS: /* 0x0024 */
case MPI_IOCSTATUS_CONFIG_CANT_COMMIT: /* 0x0025 */
- /* No message for Config IOCStatus values */
+ mpt_iocstatus_info_config(ioc, status, mf);
break;
+/****************************************************************************/
+/* SCSIIO Reply (SPI, FCP, SAS) initiator values */
+/* */
+/* Look at mptscsih_iocstatus_info_scsiio in mptscsih.c */
+/* */
+/****************************************************************************/
+
case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR: /* 0x0040 */
- /* No message for recovered error
- desc = "SCSI Recovered Error";
- */
+ case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN: /* 0x0045 */
+ case MPI_IOCSTATUS_SCSI_INVALID_BUS: /* 0x0041 */
+ case MPI_IOCSTATUS_SCSI_INVALID_TARGETID: /* 0x0042 */
+ case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE: /* 0x0043 */
+ case MPI_IOCSTATUS_SCSI_DATA_OVERRUN: /* 0x0044 */
+ case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR: /* 0x0046 */
+ case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR: /* 0x0047 */
+ case MPI_IOCSTATUS_SCSI_TASK_TERMINATED: /* 0x0048 */
+ case MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH: /* 0x0049 */
+ case MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED: /* 0x004A */
+ case MPI_IOCSTATUS_SCSI_IOC_TERMINATED: /* 0x004B */
+ case MPI_IOCSTATUS_SCSI_EXT_TERMINATED: /* 0x004C */
break;
- case MPI_IOCSTATUS_SCSI_INVALID_BUS: /* 0x0041 */
- desc = "SCSI Invalid Bus";
+/****************************************************************************/
+/* SCSI Target values */
+/****************************************************************************/
+
+ case MPI_IOCSTATUS_TARGET_PRIORITY_IO: /* 0x0060 */
+ desc = "Target: Priority IO";
break;
- case MPI_IOCSTATUS_SCSI_INVALID_TARGETID: /* 0x0042 */
- desc = "SCSI Invalid TargetID";
+ case MPI_IOCSTATUS_TARGET_INVALID_PORT: /* 0x0061 */
+ desc = "Target: Invalid Port";
break;
- case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE: /* 0x0043 */
- {
- SCSIIORequest_t *pScsiReq = (SCSIIORequest_t *) mf;
- U8 cdb = pScsiReq->CDB[0];
- if (cdb != 0x12) { /* Inquiry is issued for device scanning */
- desc = "SCSI Device Not There";
- }
+ case MPI_IOCSTATUS_TARGET_INVALID_IO_INDEX: /* 0x0062 */
+ desc = "Target Invalid IO Index:";
break;
- }
- case MPI_IOCSTATUS_SCSI_DATA_OVERRUN: /* 0x0044 */
- desc = "SCSI Data Overrun";
+ case MPI_IOCSTATUS_TARGET_ABORTED: /* 0x0063 */
+ desc = "Target: Aborted";
break;
- case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN: /* 0x0045 */
- /* This error is checked in scsi_io_done(). Skip.
- desc = "SCSI Data Underrun";
- */
+ case MPI_IOCSTATUS_TARGET_NO_CONN_RETRYABLE: /* 0x0064 */
+ desc = "Target: No Conn Retryable";
break;
- case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR: /* 0x0046 */
- desc = "SCSI I/O Data Error";
+ case MPI_IOCSTATUS_TARGET_NO_CONNECTION: /* 0x0065 */
+ desc = "Target: No Connection";
break;
- case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR: /* 0x0047 */
- desc = "SCSI Protocol Error";
+ case MPI_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH: /* 0x006A */
+ desc = "Target: Transfer Count Mismatch";
break;
- case MPI_IOCSTATUS_SCSI_TASK_TERMINATED: /* 0x0048 */
- desc = "SCSI Task Terminated";
+ case MPI_IOCSTATUS_TARGET_STS_DATA_NOT_SENT: /* 0x006B */
+ desc = "Target: STS Data not Sent";
break;
- case MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH: /* 0x0049 */
- desc = "SCSI Residual Mismatch";
+ case MPI_IOCSTATUS_TARGET_DATA_OFFSET_ERROR: /* 0x006D */
+ desc = "Target: Data Offset Error";
break;
- case MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED: /* 0x004A */
- desc = "SCSI Task Management Failed";
+ case MPI_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA: /* 0x006E */
+ desc = "Target: Too Much Write Data";
break;
- case MPI_IOCSTATUS_SCSI_IOC_TERMINATED: /* 0x004B */
- desc = "SCSI IOC Terminated";
+ case MPI_IOCSTATUS_TARGET_IU_TOO_SHORT: /* 0x006F */
+ desc = "Target: IU Too Short";
break;
- case MPI_IOCSTATUS_SCSI_EXT_TERMINATED: /* 0x004C */
- desc = "SCSI Ext Terminated";
+ case MPI_IOCSTATUS_TARGET_ACK_NAK_TIMEOUT: /* 0x0070 */
+ desc = "Target: ACK NAK Timeout";
+ break;
+
+ case MPI_IOCSTATUS_TARGET_NAK_RECEIVED: /* 0x0071 */
+ desc = "Target: Nak Received";
+ break;
+
+/****************************************************************************/
+/* Fibre Channel Direct Access values */
+/****************************************************************************/
+
+ case MPI_IOCSTATUS_FC_ABORTED: /* 0x0066 */
+ desc = "FC: Aborted";
+ break;
+
+ case MPI_IOCSTATUS_FC_RX_ID_INVALID: /* 0x0067 */
+ desc = "FC: RX ID Invalid";
+ break;
+
+ case MPI_IOCSTATUS_FC_DID_INVALID: /* 0x0068 */
+ desc = "FC: DID Invalid";
+ break;
+
+ case MPI_IOCSTATUS_FC_NODE_LOGGED_OUT: /* 0x0069 */
+ desc = "FC: Node Logged Out";
+ break;
+
+ case MPI_IOCSTATUS_FC_EXCHANGE_CANCELED: /* 0x006C */
+ desc = "FC: Exchange Canceled";
+ break;
+
+/****************************************************************************/
+/* LAN values */
+/****************************************************************************/
+
+ case MPI_IOCSTATUS_LAN_DEVICE_NOT_FOUND: /* 0x0080 */
+ desc = "LAN: Device not Found";
+ break;
+
+ case MPI_IOCSTATUS_LAN_DEVICE_FAILURE: /* 0x0081 */
+ desc = "LAN: Device Failure";
+ break;
+
+ case MPI_IOCSTATUS_LAN_TRANSMIT_ERROR: /* 0x0082 */
+ desc = "LAN: Transmit Error";
+ break;
+
+ case MPI_IOCSTATUS_LAN_TRANSMIT_ABORTED: /* 0x0083 */
+ desc = "LAN: Transmit Aborted";
+ break;
+
+ case MPI_IOCSTATUS_LAN_RECEIVE_ERROR: /* 0x0084 */
+ desc = "LAN: Receive Error";
+ break;
+
+ case MPI_IOCSTATUS_LAN_RECEIVE_ABORTED: /* 0x0085 */
+ desc = "LAN: Receive Aborted";
+ break;
+
+ case MPI_IOCSTATUS_LAN_PARTIAL_PACKET: /* 0x0086 */
+ desc = "LAN: Partial Packet";
+ break;
+
+ case MPI_IOCSTATUS_LAN_CANCELED: /* 0x0087 */
+ desc = "LAN: Canceled";
+ break;
+
+/****************************************************************************/
+/* Serial Attached SCSI values */
+/****************************************************************************/
+
+ case MPI_IOCSTATUS_SAS_SMP_REQUEST_FAILED: /* 0x0090 */
+ desc = "SAS: SMP Request Failed";
+ break;
+
+ case MPI_IOCSTATUS_SAS_SMP_DATA_OVERRUN: /* 0x0090 */
+ desc = "SAS: SMP Data Overrun";
break;
default:
desc = "Others";
break;
}
- if (desc != NULL)
- printk(MYIOC_s_INFO_FMT "IOCStatus(0x%04x): %s\n", ioc->name, status, desc);
+
+ if (!desc)
+ return;
+
+ printk(MYIOC_s_INFO_FMT "IOCStatus(0x%04X): %s\n", ioc->name, status, desc);
}
+#endif
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
EXPORT_SYMBOL(mpt_attach);
mpt_put_msg_frame(ioc->DoneCtx, ioc, mf);
}
+#ifdef MPT_DEBUG_REPLY
+/**
+ * mptscsih_iocstatus_info_scsiio - IOCSTATUS information for SCSIIO
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @ioc_status: U32 IOCStatus word from IOC
+ * @scsi_status: U8 sam status from target
+ * @scsi_state: U8 scsi state
+ * @sc: original scsi cmnd pointer
+ * @mf: Pointer to MPT request frame
+ *
+ * Refer to lsi/mpi.h.
+ **/
+static void
+mptscsih_iocstatus_info_scsiio(MPT_ADAPTER *ioc, u32 ioc_status,
+ u8 scsi_status, u8 scsi_state, struct scsi_cmnd *sc)
+{
+ char extend_desc[EVENT_DESCR_STR_SZ];
+ char *desc = NULL;
+
+ switch (ioc_status) {
+
+ case MPI_IOCSTATUS_SCSI_INVALID_BUS: /* 0x0041 */
+ desc = "SCSI Invalid Bus";
+ break;
+
+ case MPI_IOCSTATUS_SCSI_INVALID_TARGETID: /* 0x0042 */
+ desc = "SCSI Invalid TargetID";
+ break;
+
+ case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE: /* 0x0043 */
+ /*
+ * Inquiry is issued for device scanning
+ */
+ if (sc->cmnd[0] != 0x12)
+ desc = "SCSI Device Not There";
+ break;
+
+ case MPI_IOCSTATUS_SCSI_DATA_OVERRUN: /* 0x0044 */
+ desc = "SCSI Data Overrun";
+ break;
+
+ case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR: /* 0x0046 */
+ desc = "SCSI I/O Data Error";
+ break;
+
+ case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR: /* 0x0047 */
+ desc = "SCSI Protocol Error";
+ break;
+
+ case MPI_IOCSTATUS_SCSI_TASK_TERMINATED: /* 0x0048 */
+ desc = "SCSI Task Terminated";
+ break;
+
+ case MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH: /* 0x0049 */
+ desc = "SCSI Residual Mismatch";
+ break;
+
+ case MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED: /* 0x004A */
+ desc = "SCSI Task Management Failed";
+ break;
+
+ case MPI_IOCSTATUS_SCSI_IOC_TERMINATED: /* 0x004B */
+ desc = "SCSI IOC Terminated";
+ break;
+
+ case MPI_IOCSTATUS_SCSI_EXT_TERMINATED: /* 0x004C */
+ desc = "SCSI Ext Terminated";
+ break;
+ }
+
+ if (!desc)
+ return;
+
+ snprintf(extend_desc, EVENT_DESCR_STR_SZ,
+ "[%d:%d:%d:%d] cmd=%02Xh, sam_status=%02Xh state=%02Xh",
+ sc->device->host->host_no,
+ sc->device->channel, sc->device->id, sc->device->lun,
+ sc->cmnd[0], scsi_status, scsi_state);
+
+ printk(MYIOC_s_INFO_FMT "IOCStatus(0x%04X): %s: %s\n",
+ ioc->name, ioc_status, desc, extend_desc);
+}
+#endif
+
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
* mptscsih_io_done - Main SCSI IO callback routine registered to
u32 xfer_cnt;
u16 status;
u8 scsi_state, scsi_status;
+ u32 log_info;
status = le16_to_cpu(pScsiReply->IOCStatus) & MPI_IOCSTATUS_MASK;
scsi_state = pScsiReply->SCSIState;
scsi_status = pScsiReply->SCSIStatus;
xfer_cnt = le32_to_cpu(pScsiReply->TransferCount);
sc->resid = sc->request_bufflen - xfer_cnt;
+ log_info = le32_to_cpu(pScsiReply->IOCLogInfo);
/*
* if we get a data underrun indication, yet no data was
status = MPI_IOCSTATUS_SUCCESS;
}
- dreplyprintk((KERN_NOTICE "Reply ha=%d id=%d lun=%d:\n"
- "IOCStatus=%04xh SCSIState=%02xh SCSIStatus=%02xh\n"
- "resid=%d bufflen=%d xfer_cnt=%d\n",
- ioc->id, sc->device->id, sc->device->lun,
- status, scsi_state, scsi_status, sc->resid,
- sc->request_bufflen, xfer_cnt));
-
if (scsi_state & MPI_SCSI_STATE_AUTOSENSE_VALID)
mptscsih_copy_sense_data(sc, hd, mf, pScsiReply);
*/
if (scsi_state & MPI_SCSI_STATE_RESPONSE_INFO_VALID &&
pScsiReply->ResponseInfo) {
- printk(KERN_NOTICE "ha=%d id=%d lun=%d: "
+ printk(KERN_NOTICE "[%d:%d:%d:%d] "
"FCP_ResponseInfo=%08xh\n",
- ioc->id, sc->device->id, sc->device->lun,
+ sc->device->host->host_no, sc->device->channel,
+ sc->device->id, sc->device->lun,
le32_to_cpu(pScsiReply->ResponseInfo));
}
if ( ioc->bus_type == SAS ) {
u16 ioc_status = le16_to_cpu(pScsiReply->IOCStatus);
if (ioc_status & MPI_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE) {
- u32 log_info = le32_to_cpu(mr->u.reply.IOCLogInfo);
- log_info &=SAS_LOGINFO_MASK;
- if (log_info == SAS_LOGINFO_NEXUS_LOSS) {
+ if ((log_info & SAS_LOGINFO_MASK)
+ == SAS_LOGINFO_NEXUS_LOSS) {
sc->result = (DID_BUS_BUSY << 16);
break;
}
else /* Sufficient data transfer occurred */
sc->result = (DID_OK << 16) | scsi_status;
dreplyprintk((KERN_NOTICE
- "RESIDUAL_MISMATCH: result=%x on id=%d\n", sc->result, sc->device->id));
+ "RESIDUAL_MISMATCH: result=%x on channel=%d id=%d\n",
+ sc->result, sc->device->channel, sc->device->id));
break;
case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN: /* 0x0045 */
} /* switch(status) */
- dreplyprintk((KERN_NOTICE " sc->result is %08xh\n", sc->result));
+#ifdef MPT_DEBUG_REPLY
+ if (sc->result) {
+
+ mptscsih_iocstatus_info_scsiio(ioc, status,
+ scsi_status, scsi_state, sc);
+
+ dreplyprintk(("%s: [%d:%d:%d:%d] cmd=0x%02x "
+ "result=0x%08x\n\tiocstatus=0x%04X "
+ "scsi_state=0x%02X scsi_status=0x%02X "
+ "loginfo=0x%08X\n", __FUNCTION__,
+ sc->device->host->host_no, sc->device->channel, sc->device->id,
+ sc->device->lun, sc->cmnd[0], sc->result, status,
+ scsi_state, scsi_status, log_info));
+
+ dreplyprintk(("%s: [%d:%d:%d:%d] resid=%d "
+ "bufflen=%d xfer_cnt=%d\n", __FUNCTION__,
+ sc->device->host->host_no, sc->device->channel, sc->device->id,
+ sc->device->lun, sc->resid, sc->request_bufflen,
+ xfer_cnt));
+ }
+#endif
+
} /* end of address reply case */
/* Unmap the DMA buffers, if any. */
projects / linux-2.6 / commitdiff