kfree(txt);
}
+/* Read up to count-1 bytes of device id. Terminate buffer with
+ * '\0'. Buffer begins with two Device ID length bytes as given by
+ * device. */
+static ssize_t parport_read_device_id (struct parport *port, char *buffer,
+ size_t count)
+{
+ unsigned char length[2];
+ unsigned lelen, belen;
+ size_t idlens[4];
+ unsigned numidlens;
+ unsigned current_idlen;
+ ssize_t retval;
+ size_t len;
+
+ /* First two bytes are MSB,LSB of inclusive length. */
+ retval = parport_read (port, length, 2);
+
+ if (retval < 0)
+ return retval;
+ if (retval != 2)
+ return -EIO;
+
+ if (count < 2)
+ return 0;
+ memcpy(buffer, length, 2);
+ len = 2;
+
+ /* Some devices wrongly send LE length, and some send it two
+ * bytes short. Construct a sorted array of lengths to try. */
+ belen = (length[0] << 8) + length[1];
+ lelen = (length[1] << 8) + length[0];
+ idlens[0] = min(belen, lelen);
+ idlens[1] = idlens[0]+2;
+ if (belen != lelen) {
+ int off = 2;
+ /* Don't try lenghts of 0x100 and 0x200 as 1 and 2 */
+ if (idlens[0] <= 2)
+ off = 0;
+ idlens[off] = max(belen, lelen);
+ idlens[off+1] = idlens[off]+2;
+ numidlens = off+2;
+ }
+ else {
+ /* Some devices don't truly implement Device ID, but
+ * just return constant nibble forever. This catches
+ * also those cases. */
+ if (idlens[0] == 0 || idlens[0] > 0xFFF) {
+ printk (KERN_DEBUG "%s: reported broken Device ID"
+ " length of %#zX bytes\n",
+ port->name, idlens[0]);
+ return -EIO;
+ }
+ numidlens = 2;
+ }
+
+ /* Try to respect the given ID length despite all the bugs in
+ * the ID length. Read according to shortest possible ID
+ * first. */
+ for (current_idlen = 0; current_idlen < numidlens; ++current_idlen) {
+ size_t idlen = idlens[current_idlen];
+ if (idlen+1 >= count)
+ break;
+
+ retval = parport_read (port, buffer+len, idlen-len);
+
+ if (retval < 0)
+ return retval;
+ len += retval;
+
+ if (port->physport->ieee1284.phase != IEEE1284_PH_HBUSY_DAVAIL) {
+ if (belen != len) {
+ printk (KERN_DEBUG "%s: Device ID was %d bytes"
+ " while device told it would be %d"
+ " bytes\n",
+ port->name, len, belen);
+ }
+ goto done;
+ }
+
+ /* This might end reading the Device ID too
+ * soon. Hopefully the needed fields were already in
+ * the first 256 bytes or so that we must have read so
+ * far. */
+ if (buffer[len-1] == ';') {
+ printk (KERN_DEBUG "%s: Device ID reading stopped"
+ " before device told data not available. "
+ "Current idlen %d of %d, len bytes %02X %02X\n",
+ port->name, current_idlen, numidlens,
+ length[0], length[1]);
+ goto done;
+ }
+ }
+ if (current_idlen < numidlens) {
+ /* Buffer not large enough, read to end of buffer. */
+ size_t idlen, len2;
+ if (len+1 < count) {
+ retval = parport_read (port, buffer+len, count-len-1);
+ if (retval < 0)
+ return retval;
+ len += retval;
+ }
+ /* Read the whole ID since some devices would not
+ * otherwise give back the Device ID from beginning
+ * next time when asked. */
+ idlen = idlens[current_idlen];
+ len2 = len;
+ while(len2 < idlen && retval > 0) {
+ char tmp[4];
+ retval = parport_read (port, tmp,
+ min(sizeof tmp, idlen-len2));
+ if (retval < 0)
+ return retval;
+ len2 += retval;
+ }
+ }
+ /* In addition, there are broken devices out there that don't
+ even finish off with a semi-colon. We do not need to care
+ about those at this time. */
+ done:
+ buffer[len] = '\0';
+ return len;
+}
+
/* Get Std 1284 Device ID. */
-ssize_t parport_device_id (int devnum, char *buffer, size_t len)
+ssize_t parport_device_id (int devnum, char *buffer, size_t count)
{
ssize_t retval = -ENXIO;
struct pardevice *dev = parport_open (devnum, "Device ID probe",
parport_claim_or_block (dev);
- /* Negotiate to compatibility mode, and then to device ID mode.
- * (This is in case we are already in device ID mode.) */
+ /* Negotiate to compatibility mode, and then to device ID
+ * mode. (This so that we start form beginning of device ID if
+ * already in device ID mode.) */
parport_negotiate (dev->port, IEEE1284_MODE_COMPAT);
retval = parport_negotiate (dev->port,
IEEE1284_MODE_NIBBLE | IEEE1284_DEVICEID);
if (!retval) {
- int idlen;
- unsigned char length[2];
-
- /* First two bytes are MSB,LSB of inclusive length. */
- retval = parport_read (dev->port, length, 2);
-
- if (retval != 2) goto end_id;
-
- idlen = (length[0] << 8) + length[1] - 2;
- /*
- * Check if the caller-allocated buffer is large enough
- * otherwise bail out or there will be an at least off by one.
- */
- if (idlen + 1 < len)
- len = idlen;
- else {
- retval = -EINVAL;
- goto out;
- }
- retval = parport_read (dev->port, buffer, len);
-
- if (retval != len)
- printk (KERN_DEBUG "%s: only read %Zd of %Zd ID bytes\n",
- dev->port->name, retval,
- len);
-
- /* Some printer manufacturers mistakenly believe that
- the length field is supposed to be _exclusive_.
- In addition, there are broken devices out there
- that don't even finish off with a semi-colon. */
- if (buffer[len - 1] != ';') {
- ssize_t diff;
- diff = parport_read (dev->port, buffer + len, 2);
- retval += diff;
-
- if (diff)
- printk (KERN_DEBUG
- "%s: device reported incorrect "
- "length field (%d, should be %Zd)\n",
- dev->port->name, idlen, retval);
- else {
- /* One semi-colon short of a device ID. */
- buffer[len++] = ';';
- printk (KERN_DEBUG "%s: faking semi-colon\n",
- dev->port->name);
-
- /* If we get here, I don't think we
- need to worry about the possible
- standard violation of having read
- more than we were told to. The
- device is non-compliant anyhow. */
- }
- }
-
- end_id:
- buffer[len] = '\0';
+ retval = parport_read_device_id (dev->port, buffer, count);
parport_negotiate (dev->port, IEEE1284_MODE_COMPAT);
+ if (retval > 2)
+ parse_data (dev->port, dev->daisy, buffer+2);
}
- if (retval > 2)
- parse_data (dev->port, dev->daisy, buffer);
-
-out:
parport_release (dev);
parport_close (dev);
return retval;
projects / linux-2.6 / commitdiff