obj-$(CONFIG_MMC_OMAP) += omap.o
mmc_core-y := mmc.o mmc_queue.o mmc_sysfs.o
+
+ifeq ($(CONFIG_MMC_DEBUG),y)
+EXTRA_CFLAGS += -DDEBUG
+endif
#define DRIVER_NAME "au1xxx-mmc"
/* Set this to enable special debugging macros */
-/* #define MMC_DEBUG */
-#ifdef MMC_DEBUG
-#define DEBUG(fmt, idx, args...) printk("au1xx(%d): DEBUG: " fmt, idx, ##args)
+#ifdef DEBUG
+#define DBG(fmt, idx, args...) printk("au1xx(%d): DEBUG: " fmt, idx, ##args)
#else
-#define DEBUG(fmt, idx, args...)
+#define DBG(fmt, idx, args...)
#endif
const struct {
break;
if (status & SD_STATUS_RC) {
- DEBUG("RX CRC Error [%d + %d].\n", host->id,
+ DBG("RX CRC Error [%d + %d].\n", host->id,
host->pio.len, count);
break;
}
if (status & SD_STATUS_RO) {
- DEBUG("RX Overrun [%d + %d]\n", host->id,
+ DBG("RX Overrun [%d + %d]\n", host->id,
host->pio.len, count);
break;
}
else if (status & SD_STATUS_RU) {
- DEBUG("RX Underrun [%d + %d]\n", host->id,
+ DBG("RX Underrun [%d + %d]\n", host->id,
host->pio.len, count);
break;
}
{
struct au1xmmc_host *host = mmc_priv(mmc);
- DEBUG("set_ios (power=%u, clock=%uHz, vdd=%u, mode=%u)\n",
+ DBG("set_ios (power=%u, clock=%uHz, vdd=%u, mode=%u)\n",
host->id, ios->power_mode, ios->clock, ios->vdd,
ios->bus_mode);
au1xmmc_receive_pio(host);
}
else if (status & 0x203FBC70) {
- DEBUG("Unhandled status %8.8x\n", host->id, status);
+ DBG("Unhandled status %8.8x\n", host->id, status);
handled = 0;
}
if (host->mrq != NULL) {
u32 status = au_readl(HOST_STATUS(host));
- DEBUG("PENDING - %8.8x\n", host->id, status);
+ DBG("PENDING - %8.8x\n", host->id, status);
}
mod_timer(&host->timer, jiffies + AU1XMMC_DETECT_TIMEOUT);
#include "mmc.h"
-#ifdef CONFIG_MMC_DEBUG
-#define DBG(x...) printk(KERN_DEBUG x)
-#else
-#define DBG(x...) do { } while (0)
-#endif
-
#define CMD_RETRIES 3
/*
{
struct mmc_command *cmd = mrq->cmd;
int err = mrq->cmd->error;
- DBG("MMC: req done (%02x): %d: %08x %08x %08x %08x\n", cmd->opcode,
- err, cmd->resp[0], cmd->resp[1], cmd->resp[2], cmd->resp[3]);
+ pr_debug("MMC: req done (%02x): %d: %08x %08x %08x %08x\n",
+ cmd->opcode, err, cmd->resp[0], cmd->resp[1],
+ cmd->resp[2], cmd->resp[3]);
if (err && cmd->retries) {
cmd->retries--;
void
mmc_start_request(struct mmc_host *host, struct mmc_request *mrq)
{
- DBG("MMC: starting cmd %02x arg %08x flags %08x\n",
- mrq->cmd->opcode, mrq->cmd->arg, mrq->cmd->flags);
+ pr_debug("MMC: starting cmd %02x arg %08x flags %08x\n",
+ mrq->cmd->opcode, mrq->cmd->arg, mrq->cmd->flags);
WARN_ON(host->card_busy == NULL);
if (!mmc_card_dead(card) && max_dtr > card->csd.max_dtr)
max_dtr = card->csd.max_dtr;
- DBG("MMC: selected %d.%03dMHz transfer rate\n",
- max_dtr / 1000000, (max_dtr / 1000) % 1000);
+ pr_debug("MMC: selected %d.%03dMHz transfer rate\n",
+ max_dtr / 1000000, (max_dtr / 1000) % 1000);
return max_dtr;
}
#define DRIVER_NAME "mmci-pl18x"
-#ifdef CONFIG_MMC_DEBUG
#define DBG(host,fmt,args...) \
pr_debug("%s: %s: " fmt, mmc_hostname(host->mmc), __func__ , args)
-#else
-#define DBG(host,fmt,args...) do { } while (0)
-#endif
static unsigned int fmax = 515633;
*/
#include <linux/config.h>
-
-#ifdef CONFIG_MMC_DEBUG
-#define DEBUG /* for dev_dbg(), pr_debug(), etc */
-#endif
-
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/init.h>
#include "pxamci.h"
-#ifdef CONFIG_MMC_DEBUG
-#define DBG(x...) printk(KERN_DEBUG x)
-#else
-#define DBG(x...) do { } while (0)
-#endif
-
#define DRIVER_NAME "pxa2xx-mci"
#define NR_SG 1
static void pxamci_finish_request(struct pxamci_host *host, struct mmc_request *mrq)
{
- DBG("PXAMCI: request done\n");
+ pr_debug("PXAMCI: request done\n");
host->mrq = NULL;
host->cmd = NULL;
host->data = NULL;
if ((cmd->resp[0] & 0x80000000) == 0)
cmd->error = MMC_ERR_BADCRC;
} else {
- DBG("ignoring CRC from command %d - *risky*\n",cmd->opcode);
+ pr_debug("ignoring CRC from command %d - *risky*\n",cmd->opcode);
}
#else
cmd->error = MMC_ERR_BADCRC;
ireg = readl(host->base + MMC_I_REG);
- DBG("PXAMCI: irq %08x\n", ireg);
+ pr_debug("PXAMCI: irq %08x\n", ireg);
if (ireg) {
unsigned stat = readl(host->base + MMC_STAT);
- DBG("PXAMCI: stat %08x\n", stat);
+ pr_debug("PXAMCI: stat %08x\n", stat);
if (ireg & END_CMD_RES)
handled |= pxamci_cmd_done(host, stat);
{
struct pxamci_host *host = mmc_priv(mmc);
- DBG("pxamci_set_ios: clock %u power %u vdd %u.%02u\n",
- ios->clock, ios->power_mode, ios->vdd / 100,
- ios->vdd % 100);
+ pr_debug("pxamci_set_ios: clock %u power %u vdd %u.%02u\n",
+ ios->clock, ios->power_mode, ios->vdd / 100,
+ ios->vdd % 100);
if (ios->clock) {
unsigned int clk = CLOCKRATE / ios->clock;
host->cmdat |= CMDAT_INIT;
}
- DBG("pxamci_set_ios: clkrt = %x cmdat = %x\n",
- host->clkrt, host->cmdat);
+ pr_debug("pxamci_set_ios: clkrt = %x cmdat = %x\n",
+ host->clkrt, host->cmdat);
}
static struct mmc_host_ops pxamci_ops = {
#define BUGMAIL "<sdhci-devel@list.drzeus.cx>"
-#ifdef CONFIG_MMC_DEBUG
#define DBG(f, x...) \
- printk(KERN_DEBUG DRIVER_NAME " [%s()]: " f, __func__,## x)
-#else
-#define DBG(f, x...) do { } while (0)
-#endif
+ pr_debug(DRIVER_NAME " [%s()]: " f, __func__,## x)
static const struct pci_device_id pci_ids[] __devinitdata = {
/* handle any SD host controller */
#define DRIVER_NAME "wbsd"
#define DRIVER_VERSION "1.5"
-#ifdef CONFIG_MMC_DEBUG
#define DBG(x...) \
- printk(KERN_DEBUG DRIVER_NAME ": " x)
+ pr_debug(DRIVER_NAME ": " x)
#define DBGF(f, x...) \
- printk(KERN_DEBUG DRIVER_NAME " [%s()]: " f, __func__ , ##x)
-#else
-#define DBG(x...) do { } while (0)
-#define DBGF(x...) do { } while (0)
-#endif
+ pr_debug(DRIVER_NAME " [%s()]: " f, __func__ , ##x)
/*
* Device resources