]> err.no Git - linux-2.6/commitdiff
[MIPS] Qemu system shutdown support
authorThiemo Seufer <ths@networkno.de>
Mon, 15 May 2006 17:59:34 +0000 (18:59 +0100)
committerRalf Baechle <ralf@linux-mips.org>
Mon, 19 Jun 2006 16:39:19 +0000 (17:39 +0100)
Signed-off-by: Thiemo Seufer <ths@networkno.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
arch/mips/qemu/Makefile
arch/mips/qemu/q-reset.c [new file with mode: 0644]
arch/mips/qemu/q-setup.c
include/asm-mips/qemu.h

index 730f459f3e9920e0efeaa257ad88063eb8ed0265..078cd3029c9ff9228b561e59690b6ef631727db6 100644 (file)
@@ -2,6 +2,6 @@
 # Makefile for Qemu specific kernel interface routines under Linux.
 #
 
-obj-y          = q-firmware.o q-irq.o q-mem.o q-setup.o
+obj-y          = q-firmware.o q-irq.o q-mem.o q-setup.o q-reset.o
 
 obj-$(CONFIG_SMP) += q-smp.o
diff --git a/arch/mips/qemu/q-reset.c b/arch/mips/qemu/q-reset.c
new file mode 100644 (file)
index 0000000..c04ebcf
--- /dev/null
@@ -0,0 +1,34 @@
+#include <linux/config.h>
+
+#include <asm/io.h>
+#include <asm/reboot.h>
+#include <asm/cacheflush.h>
+#include <asm/qemu.h>
+
+static void qemu_machine_restart(char *command)
+{
+       volatile unsigned int *reg = (unsigned int *)QEMU_RESTART_REG;
+
+       set_c0_status(ST0_BEV | ST0_ERL);
+       change_c0_config(CONF_CM_CMASK, CONF_CM_UNCACHED);
+       flush_cache_all();
+       write_c0_wired(0);
+       *reg = 42;
+       while (1)
+               cpu_wait();
+}
+
+static void qemu_machine_halt(void)
+{
+       volatile unsigned int *reg = (unsigned int *)QEMU_HALT_REG;
+
+       *reg = 42;
+       while (1)
+               cpu_wait();
+}
+
+void qemu_reboot_setup(void)
+{
+       _machine_restart = qemu_machine_restart;
+       _machine_halt = qemu_machine_halt;
+}
index 022eb1af6db12f5f8942b34061c4907096b29e9a..f27155bc2d9ad410a8fc9458bcfae1376ba45cd2 100644 (file)
@@ -2,6 +2,8 @@
 #include <asm/io.h>
 #include <asm/time.h>
 
+extern void qemu_reboot_setup(void);
+
 #define QEMU_PORT_BASE 0xb4000000
 
 const char *get_system_type(void)
@@ -22,4 +24,6 @@ void __init plat_setup(void)
 {
        set_io_port_base(QEMU_PORT_BASE);
        board_timer_setup = qemu_timer_setup;
+
+       qemu_reboot_setup();
 }
index 905c39585903924d6c3e034e16ee28b634e589a9..531caf44560cca531de876941f33a828f58e8a4b 100644 (file)
  */
 #define QEMU_C0_COUNTER_CLOCK  100000000
 
+/*
+ * Magic qemu system control location.
+ */
+#define QEMU_RESTART_REG       0xBFBF0000
+#define QEMU_HALT_REG          0xBFBF0004
+
 #endif /* __ASM_QEMU_H */